Constant string BD is safe to use a password internal unchangable?
Hi all
reasons to restrict access to some of my program ini files, I intend to use the password of the ZIP files coming with the tools of librarians openG and so save these critical files in a ZIP protected archive. Of course, some time when running the initialization of the program I have to give uncompress works the password required to read the contents of these files. Now my question is whether the use of a constant of simple string on the block diagram would be safe enough to use here.
I tried to find a constant text string in the saved VI file using Notepad ++ test but could not. So far so good. Is there a simple way to get any of the VI file constant string value without using LabVIEW and the opening of the comic (which would of course be PW protected so)? The necessary level of security is really not high, I want to just exclude any obvious loophole that I might not be aware of here.
Of course - then that ZIP archive remains open for read access at initialization, anyone can read the files from the hard drive. But it would take a number of "criminal intent" I really don't want to guarantee against the application.
Thanks for the thoughts that anyone could share.
It depends on your needs. Looks like you don't need to be impossible to crack you want just a security level. For this the zip method is probably fine, but keep in mind that the decompress function is as you said, a loophole in there self because the files will be unzipped at any given time.
Another solution is to write your files in binary form. If you know the structure of your data you will be able to understand it. It gets a little pain that you need to update your data type but a def type helps out with that.
EDIT: to also answer your question, I never could find anything like a string on a block diagram, my analysis constant a VI on the disk.
Tags: NI Software
Similar Questions
-
Sir/maam respected,
There are many programs available these days that we say and promise to optimize our pc and speed up our system and clean our registry and software problems...
Do these programs like Registry Mechanic and fixit and stuff really work... can we trust them... they are safe to use...
programs like windows silverlight and a few others which are categorized as optional when we update our windows... I noticed that these programs use a lot of RAM and my ram before use be only 34% in case of use therefore is gone up to 80% with these programs running... What do I suggest me to do... .as ram more its slowest use... my pc as it is necessary, or just an option... kindly help...
Yours sincerely,
These programs like Registry Mechanic and fixit work...
Hello
Registry Cleaner that claim to be able to set a large number of errors are all hype, snake oil that will be most often
cause more problems while not fixing anything.RAM is intended to be used, the rest doesn't matter. In fact, Windows 7 hidden advances as well as RAM is
used more efficiently.================================================================
I do not pretend you need to check the performance of your system however if you want to
so to use this resolution to fairly complete performance issues.References to Vista also apply to Windows 7.
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
This is the app, "Permanent Eraser" safe to use on OSX?
OSX 10.11.6 not having Secure Empty Trash option, is safe to use the App: Permanent Eraser to delete files? I'm afraid that this may damage other files on my MBP.
Thank you
Joe
Secure erase is not necessary if you use FileVault to encrypt the drive. In addition, do not use any fix erase secure on an SSD.
-
How to use the extension and they are safe to use?
Hello
I intend to use firefox for iMac in order to get the benefits of extensions. Extensions that I use are the visited site speed measure. I am currently using gtmetrix for my site http://www.i-phony.com , I was told that it gives results from remote servers.
My server is located in Saudi Arabia. Will be extensions of what the speed of the server measure be safe to use. And are they able to give an accurate reading of the place where I am?
your support is much appreciated.
Best regards
Each addon at AMO avaible were examined and is safe to use.
-
Is safe to use on Mac WebGuard
Hello
Is it safe to use WebGuard, which can be downloaded from ITuens on my Mac Mini. I don't want to cause any me problems, your help will be very appreciated as always.
Much thanks
rachealfromva
I don't know how effective or safe it is, but you don't need to pay for what is basically a glad when you can get one for free.
For Safari:
For Firefox or Chrome
Adblock Plus or uBlock origin. With ABP, you will need to install subscriptions, EasyList/EasyPrivacy. There are some other https://adblockplus.org/subscriptions
Firefox
uBlock origin of Firefox, Chrome
https://addons.Mozilla.org/en-us/Firefox/addon/ublock-origin/
https://chrome.Google.com/WebStore/detail/ublock-origin/cjpalhdlnbpafiamejdnhcph jbkeiagm? hl = en
Note: If you use ABP, go to subscriptions and uncheck the default box "allow non intrusive advertisements.
In Safari > Preferences > security, be sure to check "block pop-up windows".
-
How safe is using secret ios app from appstore to store important documents? Can the creater of ios app app have access to my stuff using their secret app? Thank you
Of "secret iOS app" are what kind you referring? You will need to provide more information for someone to respond to you.
-
Integoicalserver or washing machine are safe to use?
I find these two programs on my MacBookPro 2015 after using MacKeeper in the past. They are safe to use?
# They are crapware that load of MacKeeper. All uninstall them.
After you have uninstalled them, please download and install EtreCheck from http://etrecheck.com/
Run it and post the report here. The snapshot of your system will tell us if MacKeeper load any more crapware on your Mac.
-
The vista updates are not safe to use?
I recently had the problem of vista update loop. I managed to fix it get, but it's not as simple as that. I don't want it to happen again. so, can someone tell me what updates can cause it again?
I read that kb937287 caused the problem. and so it will never happen, it must be installed after KB949939. but the problem is that they both won'tinstall on my vista ultimate sp1. Maybe because mine is sp1.
are there updates like this that cause the same problem? I was still worried and never install updates again? I hope that someonecan help me... Thank you!
All updates for your particular computer operating system Vista security are safe to use.
That's what Windows Update. He checks the updates are necessary.
But, you must make sure that your computer is kept adequately
Which includes:
1 disk Cleanup.
2. analysis of the antivirus. And Anti-Malware/Spyware Scanner on a regular.
3. http://windowshelp.microsoft.com/Windows/en-AU/help/83ec0ffe-ee04-4d53-8b87-25d1f05c954e1033.mspx
"Optimize Windows Vista for better performance"
4. make sure that all drivers are up-to-date and perfectly Compatible Vista. Check in the Device Manager.
Faulty 3rd party drivers will cause problems, including in the security update.5. in the optional updates, do not part away 3rd hardware drivers download.
Always get thenm to the hardware manufacturer's Web site.Glad to see that your computer got fixed!
See you soon. Mick Murphy - Microsoft partner
-
any suggestions of what toolbars are safe and useful
Hi Any suggestions on any toolbars that are safe and useful? I have a dell dimension 4700 xp home edition and use Mozilla firefox, (do not remember what version) no beta version, I know that. I run the super spy and bases of Microsoft Security everyday something or other on request. I'm very careful about what I do with this computer. It was a gift for me and with all the help on the forum and a few consultations some Microsoft Engineers I have this computer runs smooth.
I appreciate all suggestions on the subject from the toolbar, what I really want, it's one with favorites, who does not have the one I have.Thank you
Gina Davis
Hello
Since you are using FireFox you must check with their Support and Forums. Also check with your
favorite search engine when considering a toolbar. Be careful because some questionable programs
sites for the express purpose of providing a positive assessment of their programs. However, using a suspicious
eye and logical salt usually allows to recognize those designed for this kind of deception.Support for Firefox
http://support.Mozilla.com/en-us/KB/Firefox - community and live Chat
http://support.Mozilla.com/en-us/KB/askFirefox - Forums
http://support.Mozilla.com/en-us/questionsI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
After getting scammed by some fake tech support... my computer is still safe to use?
More than two places to check (the second is obviously only valid if you are using Windows Firewall; if you use a third party firewall instead, see your user's guide or the help system application for how to manage exceptions to the firewall blocking rules):
Control Panel > system > Remote tab
make sure that no
"Allow Remote Assistance invitations sent from this computer".
or
"Allow users to connect remotely to this computer".are checked.
Control Panel > Windows Firewall > exceptions tab
Browse products "programs and services" and make sure that the only items that are checked are the application you WANT to be able to pass through the Windows Firewall
-
Is it safe to use my HP Pavilion x 2 during charging
Is it safe to use my HP Pavilion x 2 during charging?
Thank you!
Hello:
It should be no problem.
I use my computer PC laptop and tablets during the loading of all time.
The only thing that the help of the PC while it loads the fact, is to slow down the time needed for the PC charge because some of the current is diverted to run the PC.
-
Parentologic PC Health Advisor - is safe to use?
is the program "Parentologic PC Health Advisor" safe to use? What is really "microsoft approved" - because it claims that it is
Hello
Yes, PC Health Advisor is sure to analyze and use. Throughout the process of scanning and repair, you will be able to see what is changed, and you can cancel at any time. If anything wrong turn, there is also a backup system full to act as a "safety net".Regarding Microsoft products ParetoLogic are not "Approved Microsoft." However, ParetoLogic is a partner Microsoft certified.Thank you!
-
What is "DriverCure" of Paretologic is it safe to use?
What is "DriverCure" of Paretologic is it safe to use?
Guard popping up and telling me I have "15 extension problems found."
He wants me to register: launch, launch the Scan, CARDIOFREQUENCE, update or exitIs it safe to use?
I don't remember download this - but maybe?
before using or delete that I want to make sure if it's useful vs harmful?Thank you
Hi pkh156,
Looks like you have installed ParetoLogic DriverCure, see the link below for more information on this software. It is not Microsoft software, if you wish you can use it or uninstall it.
http://www.ParetoLogic.com/media/links/FileCure/index.aspx
Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
Is the registry cleaner in Auslogics BoostSpeed safe to use?
I use Auslogics BoostSpeed, which includes a registry cleaner that finds and removes the bad entries. I want to know is if it is safe to use or not. I think it's safe - after all it next to a 5-star CNET editors' and ranking user of 4 of 5 stars (out of 606 votes.)
What do you think guys?
I use Auslogics BoostSpeed, which includes a registry cleaner that finds and removes the bad entries. I want to know is if it is safe to use or not. I think it's safe - after all it next to a 5-star CNET editors' and ranking user of 4 of 5 stars (out of 606 votes.)
What do you think guys?
I use Auslogics Registry Cleaner and like it, and it should work for you. But it COULD cause (1% chance) barely.
-
Is it safe to use Safe Mod with networking for the use of the computer every day?
Hi, my computer has problems to start normally and I was wondering, is it safe to use Safe Mod with networking for the use of the computer every day? I use the computer like 10 hours + every day. Is this correct and safe? Thank you
Hello, Winston,
It is actually for troubleshooting only.
Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.
Some applications may not work properly or not at all if you use safe mode with networking for everyday computing.
Wireless network adapter may not work when you use the Option "Safe Mode with network.
http://support.Microsoft.com/kb/305616
Safe mode disables most of the processes and services running. These services include the Windows Update service. »
Maybe you are looking for
-
Convert labview 5 llb to 8.6
Could someone please convert this library (apparently from Labview 5) in a format compatible with Labview 8.6? In addition, it is possible to download the version of labview 8.2 (so I can make these conversions myself without worrying about someone)
-
Update errors: 643 & 0 x 80070008
I never encountered this problem before, but now I have a problem with the 7 MS updates that will not be installed. KB980195; KB982381; KB979906; KB975562; KB979482; KP979559; KB980218. I thought that KB979906 is for .net framework and the solution
-
Installation discs for Windows 7?
I bought a PC with Windows 7 Home Premium 64-bit installed on it. My HARD drive is just came out and I tried to download the ISO from Microsoft. Unfortunately Microsoft came back with, and the error message saying that it came pre-installed so I can'
-
Windows 7 icons on the desktop and start changed to dat file
Original title: Windows 7 icons on the desktop and Start Menu problems I am running Windows 7 Pro with service pack 1 and all the icons on the desktop Start Menu has changed into something that resembles a dat file and when you click on it, they are
-
ADF Mobile Page with the data control of Web Service not showing latest results
HelloI developed a simple mobile application of ADF. It has two functions members and subscriptions. These two pages are part of my Taskflow. On the members page I show all members in a list by using the Web Service method data Find command. In the l