Constraints in the target or source data store?

Similar Questions

• Filter on the Source data store

  Hello
  
  I am new to ODI. My source and target are the two Oracle. I have a table in the Source that has 10000 files. I Reversed engineer the source table and was able to view the data on the source data store. However, I want to filter the data on the source to send only rare recordings and not all 10000. I am writing a filter on the Data Source on a particular column store, but I still see all the records when I click Show data. Any suggestions?
  
  Thank you
  Arun
  
  Edited by: user9525002 May 19, 2010 09:26
  
  Edited by: user9525002 May 19, 2010 09:54

  Arun,

  I don't think it's possible. You want to look at the filtered source data before loading to make sure that only correct data is loaded into the target.

  A little more complicated would be to create a temporary interface (interface yellow) by selecting the Sunopsis Memory engine than the target temporary table.
  And then right-click to display on this memory temporary table data.

• Easy replacement of a source data store

  Hi gurus,
  
  Is there an easy way to replace a data store source by another with the same structure in an interface?
  Without having to redo the join, filter and the column mapping target.
  
  
  Thanks for your help.
  
  
  
  Concerning

  user1459647 wrote:
  I thank you for your quick response and says.

  Unfortunately, when I delete a data source store, all joins/filters involving this data store disappear.

  This will happen if your join filter/condition is specified only on 2 tables and 1 of them is deleted.

  And all the mappings of target involving this data store are set to 'Target' instead of 'Source' (not a big deal).

  View the area of execution, you can

  Is there something to change in my settings ODI Studio?

  I don't think so

  I use Windows 7 and ODI 11.1.1.5.

  That should be fine.

  You can explore the SYNONYM option too :)

• How to change the vmdk in another data store

  for my vm four disks are there I want to increase disk capacity but there is no space on the data store

  Hello

  Solution is that you must change the drive to another data store and increase space.

  First findout in spatial data store is avaialble.

  Select the virtual machine and migration - migration datastore - Advanced - click the drive on which you want to increase space - browse - choose data store where space is available - finishing

  After migration - more space.

• Find the range of a data store?

  I am trying to retrieve the name of the scope that each data store. When I use of GUI of Vsphere Client, I can access it by clicking on a data store and in the configuration tab, so I know that somewhere there exists information.  I have spent a lot of time to API reference and have not found a way to access to information.  Does anyone have any ideas on how I can catch these data?

  I solved it myself, DatastoreInfo is extended by the VmfsDatastoreInfo, which allows you to access HostVmfsVolume which has extensions as a field!

• Conversion in failure "the reconfiguration of processing data store.

  I'm trying to convert a Windows XP SP3 machine that has one partition D:. When I try to convert, it fails to stage "Transformation of the reconfiguration data store" with an error indicating "FAILURE: unable to find the system volume, reconfiguration is not possible." I checked the boot.ini file and it seems to be ok, however when I run a Spotmau CD to try to make some recovery/survey to see what the problem is, it shows Windows is on C:, and in the conversion process step that says "Drive to update for the layout of the destination volume letters" goes and comes without error , so I guess that converter is changing the drive letter, that is all pipe up. Can I prevent converter to change the drive letter, or can I change afterwards?

  Thanks in advance for any help.

  xp is the easiest Converter 3.0.3

  that sets up work correctly

  with 4.3 you MUST order the buslogic controller

  Von meinem iPhone gesendet

  Am the 07.07.2011 um 22:19 wrote mmillington [email protected]<>[email protected]>:

  Http://communities.vmware.com/index.jspaVMware communities >

  Conversion in failure "the reconfiguration of processing data store.

  mmillingtonhttp://communities.vmware.com/people/mmillingtonresponse > converter - see complete discussion onhttp://communities.vmware.com/message/1786568#1786568

• Moving a disk of the user in another data store

  Hello!

  I have an office pool that is used by a few users and now I discovered, as i wan't to upgrade the user drives my Netapp file server to use snapshots on them. Is there a way to move a disc of the user to its current location on the same os drive data store was a new data store?

  I know that I can put in place a new pool, but let the user discs when I do this, so this isn't an option.

  Anyone know how I can keep my user records, moving them to another data store?

  Currently a UDD cannot be moved the data to be backed up and restored. Alternatively, you can also turn on roaming profiles have the connection of the user in two places, once everything is in place, turn them off.

  WP

• Lack of space in the unable to consolidate data store, what can I do now?

  Hi all:

  Today, a single server VM was off because of the latest snapshot of veeam.

  I wen to vm machine to the Snapshot Manager and delete the snapshot.

  After you remove the server has been started and it seems that everything is OK except the message this need of consolidation server.

  I tried to regroup, but when I try to consolidate, it shows me this error

  An error occurred in consolidating the discs: msg.disklib.NOSPACE.

  After trial of vmware knowledge base I'm cloning virtual machine in another data store that is has a bit more space (temporary) so I test if it works this VM cloned as the original.

  I have a few questions. the original VM is up and runing correctly... but I don't know what to do next, please can you help me?

  1. I can move the original VM to another store of data with more than one space the machine consolidate? or it's very risky?

  2 I can always use the actual virtual machine without group until I have buy new data store and the passage to the new data store and consolidate? or maybe to clone the virtual machine to the new data store and remove them the old VM?

  3º if the cloned version works like the original VM machine, I guess I can pass version clone production and delete the virtual machine no consolidated this original data store?

  Kind regards

  There's nothing uncommon to 'Migrate' computer virtual data to another store. With Essentials it will unfortunately take time out well (without live migration of storage available).

  In any case, the cloning should also work. The clone will get however a new address UUID and MAC, (i.e. you may need to reconfigure the network), and the cloned VM will get a new ID of virtual machine, which can be important if you use a virtual machine based backup application. However, cloning does not touch the source, so if something does not work as expected you still have the source available.

  André

• ESXi connection to the Windows SFU NFS data store

  We plan to install 3 servers ESXi with virtual machines hosted on local.  A backup script align the images and move the *.vmx and *.vmdk to a NFS data store located in separate facilities which are connected via fiber.  All connections are links of 1 G.  The NFS data store will be hosted on w2k3 with SFU (Microsoft Services for Unix).

  The NFS data store will be a target for cloning and will be located in a building separated for "geographical separation."  I tested with Veema FastSCP (the public beta)... it's ok (30Mbytes/sec).  I assume that the clone process will take about 5 hours - but we can tolerate the performance hit after opening hours.

  Question:  Is there a "traps" to know by linking each ESXi server in the same directory NFS exported using SFU?  Perhaps more to the point... no problem with ESXi and Windows SFU?

  Before anyone asks... we do this on a 'super-thin budget' (that is to say... $ 0) using existing hardware, otherwise I would have ESX Enterprise and SAN storage!

  Some discussions to look at on the performance.

  http://communities.VMware.com/message/1133601#1133601

  http://communities.VMware.com/message/944761

  http://communities.VMware.com/message/997508

• Problem in the factory of source data and connection.

  I use a connection factory to make connections to the database.
  
  First I create a connection pool, then I created a data source, and finally, I used the JNDI name location that I used inside the BPEL to create a connection factory.
  
  This activity requires a restart of the server. I get the following error.
  
  
  
  file:/software/product/10.1.3.3.0/BPEL/domains/default/tmp/.bpel_IRobo_Workflow1_1.0_e580208857197172fe72bbfca5d9d8b6.tmp/fr_jumper_info.WSDL [fr_jumper_info_ptt::fr_jumper_info (InputParameters)] - SISM JCA Execute of operation 'fr_jumper_info' failed due to: could not create/access the TopLink Session.
  This session is used to connect to the data store. [Due: VDMT_IROBO_DATASOURCE not found]
  ; nested exception is:
  ORABPEL-11622
  Could not create/access the TopLink Session.
  This session is used to connect to the data store. [Due: VDMT_IROBO_DATASOURCE not found]
  See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Created by Exception [TOPLINK-7060] (Oracle TopLink - 10g Release 3 (10.1.3.3.0) (Build 070608)): oracle.toplink.exceptions.ValidationException
  Description of the exception: could not acquire the data source [VDMT_IROBO_DATASOURCE].
  Inner exception: javax.naming.NameNotFoundException: VDMT_IROBO_DATASOURCE not found.
  < / Summary >
  < / part >
  -< part name = "detail" >
  < detail >
  Description of the exception: could not acquire the data source [VDMT_IROBO_DATASOURCE].
  Inner exception: javax.naming.NameNotFoundException: VDMT_IROBO_DATASOURCE not found
  < / detailException Description: could not acquire the data source [VDMT_IROBO_DATASOURCE].
  Inner exception: javax.naming.NameNotFoundException: VDMT_IROBO_DATASOURCE not found
  < / detail

  The connection uses the JNDI name name, for example, VDMT_IROBO_DATASOURCE is just a description. So if you do not have a data source with the name JNDI of VDMT_IROBO_DATASOURCE there is no.

  You can remove it, or create another source of data that isn't xa and point your oc4j - ra.xml in this regard.

  see you soon
  James

• How to use the command to move the machine to a data store in another data store in WTT(Windows Test Technology) Atlas (2.7)?

  I searched doc help WTT Atlas, just found this: "the MoveMachine command allows users to move client computers between the basins of the machine. This command assumes that the user has permissions of correction to carry out operations and generates an error if this is not the case. "

  Note: this command just explain machine displacement between the watersheds of the machine instead of the data store.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Question about the creation of cluster data store

  I'm running vSphere 5.1 and want to enable storage Drs before as I have create the cluster data store, I was reading through VMware vSphere 5.1, but don't see any confirmation when I add data to the cluster storage, the virtual machines using these storage of data is not affected.

  Can anyone confirm that the addition of a data to a data cluster store store has no impact on virtual machines running?

  Thank you.

  Can anyone confirm that the addition of a data to a data cluster store store has no impact on virtual machines running?

  You can add and remove data warehouses in a cluster of data with VMS running store.

• How do I cancel the mapping of a data store of esxi host without data loss

  Dear team,

  I want to cancel a data store that is mapped on two cluster mapping (cluster1 10 esxi host and cluster2 esxi 4 guests)

  
  

  
  

  Query1

  What step will be OK

  Disassemble = > detach = > start the activity of storage (storage poweroff) movement = > move the storage = > poweron = > join = > mounting

  or

  Disassemble = > detach = > team san will cancel the mapping = > start the activity of storage (storage poweroff) movement = > move the storage = > poweron = > san team will map the data store = > join = > mount

  Query2:

  Once I sail, I am able to see vpshere ha and dvs folder data, I just want to confirm if I want to take it apart and to separate the data store it will allow me to do it or it will throw an error, please confirm.

  Query3:

  If we remove and detach a data store, before that I have to cancel the registration of all the virtual machines?

  
  

  
  

  concerning

  Mr. Vmware

  Please find the right measures

  Query1

  
  

  before the take-off of export activity VM that are stored on the data store

  
  

  Home-online store of data and the data cluster store => select the data-VMs online store => add all columns => take export VM

  
  

  take the last export RVTool.

  
  

  
  stop all VMs-online you unsubscribe from all models and virtual computers-online RK on Cluster (change the setting-online data store-online here hearbeating we have to choose another data store and click OK)

  
  

  to confirm the new data store is visible as heartbeat data store select Cluster-online Sumamry-online state Custer-online Heartbeat Datastore)

  If we are able to see the new data store, then now remove old data from the heart rate data store store

  
  

  RK on Cluster (change the setting-online data store-online here hearbeating he have to uncheck the data store and click OK)
  

  
  

  disassemble => detach (you will need to perform this step on all esxi hosts)-online san team will be unmap-online beginning of movement storage (storage poweroff) => move the storage-online poweron-online san team will map the data-attach online store ((need to perform this step on all esxi hosts) => set up the data store)

  
  

  Register for all virtual machines

  
  

  PowerOn all VMs if get message (moved or copied) select moved.

  
  

  Query2:

  He doesn't throw any errors, will work flawless.

  
  

  Query3:

  Yes we must cancel the registration of all models and virtual computers before disassembling a data store.

  
  

  concerning

  Mr. VMware
  

  
  

  
  

• displacement of the VM in another data store

  Hello

  We organize 2 5.5 vSphere hosts (VMware vSphere Essentials 5 Licensed for 2 processors (unlimited cores per processor) physical.)

  One of our data warehouses has insufficient free space on the disk.

  I'd be happy if someone could give me a little advice what is the best way to move or copy a virtual machine in another data store.

  Already, I read after KB, but he has not understood completely.

  VMware KB: Move or copy a virtual machine in a VMware environment

  Kind regards

  Roland

  Your screenshot shows that you are on the right track.

  As soon as you have turned off the virtual computer the

  dimmed options get turned on even on the essential.

  See you soon.

• Get the scsi for a data store information if the data store is known

  Hello

  I'm looking for a way to get the information of scsci for a data store if the name of the data store is known. In perl/powershell, this is not a big problem, but how to do this using the Orchestrator. It seems that some information is not available/accessible in vCO, as information volume.extent (object VcHostFileSystemVolume).

  For an example on how to do who, in powershell, see

  http://vwiki.co.UK/Datastore_to_LUN_Mapping_%28PowerCLI%29

  No idea on how to do the same with the Orchestrator.

  Concerning

  Thomas

  Hello

  Onyx would not help in this case. After thinking a bit, I found the solution. I looks like:

  for each {(var Mon in wfHostObject.configManager.storageSystem.storageDeviceInfo.multipathInfo.lun)

  System.Debug ("number of paths:" + lun.path.length);

  for each {(var path in lun.path)

  If (path.state == 'active') {}

  //

  Download the mountinfo

  //

  System.Debug ("mountinfo length:" + wfHostObject.configManager.storageSystem.fileSystemVolumeInfo.mountInfo.length);

  for each {(Mount var in wfHostObject.configManager.storageSystem.fileSystemVolumeInfo.mountInfo)

  If (mount.volume.hasOwnProperty ("extent")) {}

  for each {(measure of var in mount.volume.extent)

  var tmp = extent.diskName.split(/\./);

  var regExp = new RegExp(tmp[1],'gi');

  If (lun.id.match (regExp)) {}

  System.Debug ("mount.type:" + mount.volume.type);

  System.Debug ("mount.name:" + mount.volume.name);

  System.Debug ("extent.diskName:" + extent.diskName);

  }

  }

  }

  }

  }

  }

  }