Construction Ksoap2 error

Similar Questions

• construction Setup error: this application has requested the execution to terminate in an unusual way

  Hello

  I'm building an appliction using LabView 8.2 with Report Generation Toolkit for MS Office V1.1.1 on a WinXP SP3 system without any error. When I try to compile a coresponding Installer, I got the following error message:

  This application has requested the execution to terminate in an unusual way.

  Can someone help me?

  Hi Gunnar

  First of all just save the contents of the disk on your computer. Then...

  The local cache paths are stored in the registry keys.  You can change the registry in the following steps:

  1. Select start > run and enter regedit
  2. to create a backup copy of the registry, select file > export from the Registry Editor window
  3. make sure that the export range is set to all and back up the registry
  4. navigate to HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\Common\Installer\ProductCache, find the right key and change the path as necessary

  Hope this helps,

• Construction of error with the sqlite3 library

  A project is built without any problem until I have add the sqlite3 library with which I get the following compilation error:

  /bbndk-2.0.0/target/QNX6/armle-v7/usr/lib/libsqlite3.so: reference to "decompress" undefined
  CC: /mnt/Projects/PlayBook/bbndk-2.0.0/host/linux/x86/usr/bin/ntoarm-ld error 1

  With the help of NDK 2.0 on Kubuntu 11.10

  Any suggestions on what I'm not doing correctly.

  Roger

  You added "libz" to your libs instead of just "z".  You can see here:

  qcc -o myTracker src/main.o -lbps -lpps -lscreen -llibz -lsqlite3 -V4.4.2,gcc_ntoarmv7le -w1 -g -Wl,-z,relro -Wl,-z,now
  -L/mnt/Projects/PlayBook/bbndk-2.0.0/target/qnx6/../target-override/armle-v7/lib -L/mnt/Projects/PlayBook/bbndk-2.0.0/target/qnx6/../target-override/armle-v7/usr/lib
  

  You want - lz.  There is no such thing as liblibz.

  See you soon,.

  Sean

• Internal generator is used for construction - construction of error (null)

  Hi all

  First things first... It's the IDE, I use:

  QNX Momentics IDE for native BlackBerry SDK for Tablet OS

  Version: 2.0.0

  Build id: 201202171813

  I imported an assembly from another project file, I worked on (extension .s). I started having a linker error when I have a function in the referenced file. The project picked up the declaration of the function in the header file (.h), but not the definition in (.s) file.

  The first thing I found was an article on how the IDE requires le.s extension is case sensitive. I changed the extension of the file in uppercase. In addition, I also did the following to be recognized and treated as the assembly files lowercase extensions:

  Project-> properties-> C / C ++ general-> file-> new Types

  Model = *.s

  Type = Assembly Source file

  After noticing that there is no compilation error, but the linker could not yet find the function that I checked the file object (.o), and of course no file has been generated.

  I then tried to build just the assembly file (right click-> selected Build queue (s)).

  This is what I get in the Console:

  Reconstruction or the files selected

  Internal generator is used to build *.

  Build error

  (null)

  Addition of preprocessor #error throws any error. Adding indefinite #define tags around the code does triggers not any kind of syntax highlighting in the editor, as it does in c/cpp/h file.

  Here are my parameters of QCC assembler (project-> properties-> C/C++ build-> settings-> assembler CQS):

  Command:-qcc

  Options: - V4.4.2, gcc_ntoarmv7le_cpp-w1 - c-DUSING_GL11 = 1 - g

  In case anyone asks, I can't post the source for this (contract).

  Could someone suggest to get this working? Someone at - it had a similar problem and resolved it?

  See you soon,.

  G

  In fact, I think it's this bug:
  http://StackOverflow.com/questions/5209388/what-does-the-push-pin-icon-adornment-mean-in-Eclipse-CDT

  I noticed that the .cpp file has a "set" on the icon of the file. It looks like a key or a key. There seems to be a bug in Momentics/Eclipse, which causes the compiler to fall with an unspecified error (zero). I've renamed le.s file to. S and also renamed the .cpp file. I'm going to hazard a guess that by renaming the files was the cause.

  The solution for this:

  • Duplicate the file in another location and delete the file of the project (right click-> 'Delete').
  • Copy the file in the project directory where it used to be in the Finder (or Windows Explorer in Windows).
  • Refresh the project (right click-> "Refresh").

• New construction various errors usually ntoskrnl.exe - please help

  Recently, I built a new pc and installed Win 8.  A quick components list: i5 - 4670K and ASUS Z87 - has with Corsair Vengeance 16 GB DDR3 1600 Mhz and M500 Crucial SSD 120 GB and WD Green 2 TB HDD (2 x 8).

  Ever since the build, I have known many BSOD with the most common error is IRQL_NOT_LESS_OR_EQUAL is usually assigned to ntoskrnl.exe.

  I went through and updated all the drivers, run MemTest86, re-checked that different settings in the BIOS and MB Web site have where appropriate, although not most new BIOS.  Also have uninstalled antivirus.  Memtest86 showed no memory error.  I'm not totally sure how otherwise to see if a reinstall of Win 8 is necessary.  I believe that it has been updated to 8.1, but not in front of her now.

  Provide advice on things to try.  I have files of dump of crash I can if necessary.  I also reviewed the results of BluescreenView since I started having difficulties.  Tried using driververifier but not sure there's a clue in the BSOD on an interval regular for 3 to 5 minutes, I had with DRIVER_VERIFIER_IOMANAGER_VIOLATION or not.

  Any help would be appreciated!  Thank you.

  Correction of this problem.  Finally found where some BIOS memory settings were not optimized.

• Error code: 0 x 80280008 (cannot install Windows Live Essentials)

  trying to install a crucial victory live

  get the flavor of different construction of error 0 x 80280008

  You can find support in this forum ONLY for the installing/uninstalling/upgrading to Windows Live Essentials 2011: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  How to uninstall Windows Live Essentials (all programs)
  http://windowslivehelp.com/solution.aspx?SolutionID=64db5c80-85E4-49fe-BF07-cb08ffc5dd53

  You can install/upgrade to Windows Live Essentials 2011 manually via http://explore.live.com/windows-live-essentials

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• In practice, how do you handle errors?

  This issue arises out of a project I've been working on a database. Customers pull a work from a database, run it, and then post the results in the database. I have a prototype that does well enough, with the exception of a few questions (which can be written in chalk upward at the bad design).

  The first concerns the race conditions: when a customer takes a job from the database, it has first checks the task settings, then updates the status of the work to 'Running', how much work can be pulled by another customer. The race condition occurs when two customers to get the same work and are trying to insert the results of the work of the same in the table of results (primary key error). I intend to add a phase "pending" to avoid this problem.

  A second comes when the DB goes down, for some reason any. It's on a laptop, so downtime is planned on the occasion, but these errors are more difficult to propose a strategy to correct.

  Now that you see a bit where I come from, the main question.

  How you guys set up the error handling?

  I thought using a construction like this:

  

  The basic idea is to fall more and deeper structures in case Error-No error and handle errors constantly running the code in a while loop until we get no error. The problem with this approach is that a lack of support for recursion makes this code very very messy. I'm not sure how to determine which codes for a set of uses of screws, in order to make the correct handling of cases for each of them.

  I understand the importance of the management of errors and get the base implementation of this one, so the docs NOR and Sixclear videos are too simplistic. What I would like to find is a depth into the constructions of error management resource. Is there such a thing?

  Take a look at the attached PDF - it shows a fairly comprehensive list of how to handle errors in a loop/application.

  It does not cover the things that you can do with indicate error as the user, logs the error etc.

  What you are actually doing is strongly dependent on your application!

• Strange generation after error code checked in to Subversion

  People-

  I am trying to use Subversion to track my source code. I use TortoiseSVN as my client software. I checked in my java files, my Eclipse .project and .classpath and my JDP file. Then, I deleted all of the Subversion project and got own svn code. Now, I get the following error when I do a cleaning:

  Build problems
  Errors during construction.
  Errors under builder "BlackBerry resources Builder" of the project "KitchenValet".
  Could not compile files
  java.io.FileNotFoundException: C:\Documents and Settings\Christopher Keith\My Documents\fCode\KitchenValet\src\com\KitchenValet\.svn\ent.rrh (the system cannot find the file specified)

  I don't understand why the development system is looking for a file in a .svn directory. For the record, here are the contents of my file jdp. The lines formally '.svn' in the section "ExcludeFromBuildAll" seem to have been added when I ran Eclipse after own source:

  # Java RIM development environment
  # File RIM project
  #
  # This file is generated and managed by BlackBerry development tools.
  # SHOULD NOT BE changed manually.
  #
  AddOn = 0
  AlwaysBuild = 0
  [AlxImports
  ]
  AutoRestart = 0
  [ClassProtection
  ]
  [CustomBuildFiles
  ]
  [CustomBuildRules
  ]
  [DefFiles
  ]
  [DependsOn
  ]
  ExcludeFromBuildAll = 0
  [Files
  src\.svn\entries
  src\com\.svn\entries
  src\com\KitchenValet\.svn\entries
  src\com\KitchenValet\.svn\text-base\KitchenValetApp.Java.svn-base
  src\com\KitchenValet\.svn\text-base\KitchenValetScreen.Java.svn-base
  src\com\KitchenValet\KitchenValetApp.Java
  src\com\KitchenValet\KitchenValetScreen.Java
  ]
  HaveAlxImports = 0
  HaveDefs = 0
  HaveImports = 0
  [Icons
  ]
  [ImplicitRules
  ]
  [Imports
  ]
  List = 0
  Options = silent
  OutputFileName = KitchenValet
  [PackageProtection
  ]
  RibbonPosition = 0
  [RolloverIcons
  ]
  RunOnStartup = 0
  StartupTier = 7
  SystemModule = 0
  Type = 0
  UserData = | CBC

  Thanks in advance for any help.

  Follow-up: I have finally just create two different directories, one for editing code and the other to check code in and out. Slightly tedious copy files back, but I am now able to get the work done on both of my dev machines.

• CS3 - CS4 Migration, ReferenceError: Error #1065:

  Hello! I tried to migrate a project Flash based of CS3 to FDI of new CS4 for a few days, but it was impossible. All components of the library to throw the same error at the time of the construction:
  
  ReferenceError: Error #1065: < class > Variable is not defined.
  
  I changed the name of classes with the same name as the package.
  I also changed the name of the main class
  I created a new empty .fla to copy and paste all the items in the library.
  BUT I HAVE YET TO SOLVE THE PROBLEM.
  
  I tried all the solutions I found on the Internet, but the error is still there. Could you please tell me what I'm doing wrong? I would be very grateful if you could help me! Thank you.

  I hope that you have any code on the timelines of one of your objects from library. If this is the case:

  create a new fla in cs4.

  Copy your items from the library of your cs3 fla and paste them into the library of your cs4 fla and publish. are there any error messages?

  If Yes, remove about 1/2 the objects of the library and repeat until narrow down you the problem to the objects of the library as little as possible. Ideally, a library object will cause the error message. Save this cs4 fla and post a link here.

  If there is no error message, the problem is not only caused by objects in the library.

• Not able to read a text file or binary

  I am reading in a file text or binary, as shown in the Blackberry "how - adds an application of plain text or binary files"

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/How_To _...

  I use Eclipse 3.4.2 I implemented a project of Blackberry with the following structure:

  Test1 (project name)

  -src (folder)

  |   + com.name.xxx

  |   + com.name.yyy

  |            Test1.Java

  + NET_RIM_BLACKBERRY

  |

  -test

  I'm reading in the test file is at the level of the main project folder.  For example, the Test1.jdp file is located in the folder of the main project and the test file (text file or binary).  I am trying to access the file using the line of code below:

  Class classs = Class.forName(this.getClass().getName());
  
  InputStream is = classs.getResourceAsStream("/test");
  

  The getResourceAsStream indicates that the file will be in the same location as the location of the Test1.jdp file if the bar oblique is in front of the name of the file, or that it will look in the source for the main class file.  When I have the slash I get error

  CAFETERIA: could not find the test file

  I tried several different attempt to get to the CAFETERIA to find the file, but I'm running out of ideas and I would appreciate someone else's ideas on what to try.

  Thank you

  Thank you klyubin and stef

  I found a solution that works for me with Eclipse plug-ins, JDE.

  First, the example of Blackberry in the how-to (see original thread number) with test as file is named simply 'test '.  This does not work for me at all in Eclipse.  I gave up to place the file in the folder of the project Eclipse (main folder) and placed in the src folder, which of course gives a compile error because is not a Java file, and of course when using file name in my java code I changed the code correctly as in the first line that follows :

  
  // this will look in the source folder of the class // that myClass refers tois = myClass.getResourceAsStream("test.txt");
  
  // this is supposed to refer to a file called 'test' // in the source folder of the class that myClass refers to // but apparently for Eclipse it must have a .txt extension// as in the above exampleis = myClass.getResourceAsStream("test");
  
  // this is supposed to refer to a file called 'test' // in the main project folder but not apparenlty for Eclipseis = myClass.getResourceAsStream("/test");
  
  // this is supposed to refer to a file called 'test.txt' // in the main project folder but not apparenlty for Eclipseis = myClass.getResourceAsStream("/test.txt");             } 
  

  Note: I was also getting the error message when I place the file named "test" in the src below directory.  I managed to get rid of this error message by configuring the path building (similar to deleting the file of the JDP file including klyubin suggested above for Blackberry JDE ordinary rather than the plugin Eclipse) to remove the file 'test' for compiling so I would not get the compile error.

  However, this was not my main problem - if you name the file test.txt and place it in the src directory you do not get this error I believe.

  Errors during construction

  Errors running builder "Blackberry resources Builder" on the project...

  Could not compile files

  java.io.FileNotFoundException: C:\path to the file I had added in the directory\.rrh of the source (or some truncation of the file name .rrh - for example te.rrh)

  Finally, I have checked the jar (as klyubin suggested) file that is created when I place the file 'test' or 'test.txt' in my Eclipse project main folder.  The jar file did not contain the name file and so when I run in the Simulator, the file is not found.  Even when I put the file in the jar (main directory) myself the Simulator still could not find the file.   When I placed the test.txt file in my directory src the jar resulting file contains the file named and the Simulator can find the file ok.

  So, it seems to me that for the plug-in Eclipse JDE contextual explanation of the method getResourceAsStream does not apply as described at this time.

  getResourceAsStream

  public InputStream getResourceAsStream(String name)
  

  Looking for a resource with a given name. This method returns null if no resource with this name is found. The rules looking for resources associated with a given class are specific profile. RIM implementation notes: this method searches the resource from the directory in which the current JDP project file is located. By default, it is assumed that this JDP file resides in the parent directory of the package of the current project space. Thus, the package space tree (for example, com/rim/PackageName) is added to name so that the search begins from this space package, that is, in the source directory of the current project. However, if the current JDP project file does not lie in its presumed location, the behavior above prevent the resource located. In this case, the user must add a slash (/) in the name of the resource before calling getResourceAsStream. This treats the name as an absolute path, which is compared to a tree whose root is the location of the JDP file. Parameters: name - name of the desired resource Returns: a java.io.InputStream object. Since: JDK1.1

  If Alain klyubin (or someone else) can enlighten us more on why the file should be named *.txt to find the file in the source directory, which can be useful to me and others in the future.  My real goal is to read in an image file named *.jpeg.  We'll see how it goes.

  And thank you klyubin for the suggested code change which I had also found in another thread...

  // this was more than what was necessary//Class myClass = Class.forName(this.getClass().getName());
  
  // this is simpler  Class myClass = this.getClass();
  

  And so many other Eclipse users who try to follow the Blackberry How To - add a text or a binary file in an application, do not forget to consult the file name in your code java as in the examples that I gave above.

• Replace with CSS?

  Hi all

  I have a text with HTML tags stored in a database I want to exit. The recorded text includes some < p > tags, but when the output, I would like to apply a style, so I used #replaceNoCase (MessageBody, "< p >", "< p class ="Copy">","all") #, but I get an invalid construction CFML error. I don't know that it's because of 'copy' in quotes.  Is there a way to get around this?

  Thank you very much!

  Use single quotes to quote the double quotes.

• build the file

  Hello...
  
  How can I use a version of you my project ANT script? I already have the "build.xml" file, but I don't know how to use it in my project.
  
  I tried to do in looking at project-properties-builders. I created a new Builder by selecting the build.xml file in the location of the field and other values, that I have not changed. However, I have the following error:
  
  Errors during construction.
  Errors running builder "External tool Builder integrated" on the mon_project project
  Exception occurred in the run command line.
  CreateProcess: C:\workspace\my_project\flex\build.xml error 193
  
  I think I might do something wrong. Could you help me find my error?
  
  Thanks in advance

  Here is a working example of the ANT script to build the flex application. In case you it seems that you are missing the flex Ant jar specified in my script by:

  
  

  
  
  output="${APP_ROOT}/bin/no-debug/analysis.swf".
  optimize = 'true '.
  strict = "true".
  warning = "false" >

  
  

  
  
  

  
  

  ATTA

• Error 6 in construction of Apllication of the executable

  
  

  Hi Ather.lq,

  An error 6 is usually generated when you create a distribution and the path of a file in the project extends beyond the limit of 255 characters allowed by Windows. Here are a few troubleshooting steps that may help:

  1. Use a shorter path, such asc:\
  2. Make sure that your file path does not point to a wrong drive, such as a CD or DVD drive.
  3. Application (EXE) or shared library (DLL) of construction, check the box use LabVIEW 8.x file available in the advanced build specification Properties dialog box page.

• It gave me the error I already had a flavor different from windows essentials construction when I tried to update to the basics of windows 2011

  After trying to install windows essentials 2011 they gave me the error that I already have a taste of different construction of windows essentials and advised to uninstall the version, I already had. However, when I tried to uninstall windows essential that he would not completely uninstall and so I got the same error again.

  Hi jess.lewis7,

  The question you have posted is related to Hotmail and would be better suited to the community of Windows live.

  Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/product.aspx?ProductID=12

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receive the message to install Windows Live Essentials 2011. Error message - I have a "taste of different construction of Windows Live"

  I use Windows 7. I received several reminders to install Windows Live Essentials 2011. When I try, I get the error message that I have "a taste of different construction of Windows Live". Everything works fine. If I do not need to install the update, it is fine. Just do not know what to do. Thank you! Julie

  You can find support for the installation/uninstall/upgrade Windows Live Essentials in this forum: http://answers.microsoft.com/en-us/windowslive/forum/wlinstall

  Or see...

  Windows Live Essentials Help Center
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center