Consume message JMS work through proxy OSB service unit

Similar Questions

• How to get the hostname of proxy OSB service

  I would like to get the hostname within a service proxy so that I can build a url replyTo generically.
  For example, I have a proxy service that publishes on an external web service that meets another proxy on the OSB service. I can code hard the host in the url for the replyTo, but when I install the OSB project on another platform, I would need to change the proxy service for the hostname of the new platform. I'd rather build the replyTo url using the host name of the installed platform so that when I left the thisHost to thatHost project, I don't have to do any additional configuration. So, is there a way to obtain the host name of the platform within a proxy service? Thank you.

  Here we did it with a Custom XPath returning System.getProperty ("weblogic. Name")
  a legend of Java can also be used, citing the same code.

  Alternatively, you can call JMX (look at the HyperCard methog here):
  http://www.javamonamour.org/2012/08/WebLogic-finding-health-state-through.html)
  but it's much more complicated.

• Message access control in the OSB proxy service when the Service Type is the Any SOAP Service

  Hello

  We have a proxy OSB service where the Service Type is 'no matter what SOAP Service'. We use Auth.xml to authenticate messages to achieve this proxy service.

  It is, ca we apply Message this proxy access control so that only user A is allowed to sent message has and only user B is allowed to message sent B?

  Us know if the proxy OSB service is based on a wsdl, then we can apply access control message for each operation in the Security tab - and thus specify which user can access the operation. But unfortunately, we have not a wsdl, because this service proxy is a proxy gateway and must accept any SOAP message reaches.

  For example, if the user name in the SOAP header is msgAUser, get is accepted.

  "< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/">"

  < soapenv:Header >

  "< xmlns:wsse wsse: Security ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">."

  < wsse: UsernameToken >

  < wsse:Username >msgAUser< / wsse:Username >

  < wsse:Password >msgApwd< / wsse:Password >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  <Get>

  ...

  < /Get>

  < / soapenv:Body >

  < / soapenv:Envelope >

  If the user name in the SOAP header is msgBUser, then MessageB is accepted.

  "< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/">"

  < soapenv:Header >

  "< xmlns:wsse wsse: Security ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">."

  < wsse: UsernameToken >

  < wsse:Username >msgBUser< / wsse:Username >

  < wsse:Password >msgBpwd< / wsse:Password >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  <MessageB>

  ...

  < /MessageB>

  < / soapenv:Body >

  < / soapenv:Envelope >

  Any suggestions please?

  Understood.

  My current client, we have faced the same problem and implemented a similar design which nevertheless has important benefits.

  The problem with proxy input all SOAP is not only in the complexities of authentication. Most important, resources fine grain (thread) management becomes impossible: proxy entry has a workmanager, one constraint of son max. If any single service behind entered proxy knows an influx of requests (because of a peak or a misconfigured customer), he eats the workmanager dry and the rest of the services become too inadmissible.

  In this spirit, we have implemented the following diagram. It's a little more complicated, but it serves us well for a few years already:

  EntryProxy 1-> Interceptor entering Proxy-> Proxy 1

  EntryProxy 2-> Interceptor entering Proxy-> Proxy 2

  ...

  Enter proxy doesn't do Nothing but shall forward the request for interception of incoming traffic. Power of Attorney of the entry, however, has its own WSDL, authentication and the workmanager which allows precise control.

  Another important aspect of a proxy of the entry, it is that it passes a custom header containing the name of the destination of the interceptor, e.g. TargetURI = "ProxyService/Paypal/Paypal.

  Incoming Interceptor Proxy performs all recording, the error handling and other common tasks.

  Then, according to the last header, the proxy of the interceptor makes a dynamic call to route to the specified destination.

  Yes, this design has an additional moving part - a proxy entry - but he a) works b) guard control all in our hands. The entry proxy is a very small point; When I need to make a new one, I just copy an existing one and replace the WSDL file and the value of the TargetURI - 30 seconds of work.

  Hope that helps.

  Vlad

  http://vladimirdyuzhev.com

• JMS according to the messaging service and the OSB Service account

  Hi forum,
  
  I have a question about the service and the account of JMS Messaging Service.
  
  My OSB service:
  I created a service of OSB that JMS type
  configuration:
  General: email
  E-mail: Request Type: type of XML response: no
  Transport: JMS
  JMS transport: Destination queue. Type, account Service JMS:... (Browse)
  
  
  My requirement is to ensure security to the JMS proxy.
  I saw an option available in the JMS transport is JMS Service account.
  
  I don't have an idea on the use of service accounts in JMS.
  
  one can pls give idea about the JMS service account in JmS.How to ensure safety to jms proxy...
  If you have any documents pls share me
  
  
  Thank you and best regards,
  Krishna.

  In your weblogic console go to your JMS Modules > * JMSModule > * tail > roles > policies. Add a user to the queue. This user must exist in the field of security in the weblogic console.
  Create a service with the same user name password account and use it in your OSB to read or write to the queue.

• Messaging Jms OSB service

  Hello
  
  I want to pass some kind of object argument using jms ObjectMessage and receive the service proxy OSB.
  
  I create the proxy as courier service. but I have no idea with the Message Type.
  
  What kind of message type, I should use to read the message of java object?
  
  Is this possible?
  
  in fact, I use the proxy OSB as receiver of Message service.
  
  so when I get the message, I need to read the message in the soap body and pass as arguments in the business services.
  
  Is it possible to do this?
  
  With respect,
  WP

  Hi Wai Phyo,

  Sabrina wrote:
  Yes it's true.

  but I still have no idea how encapsulate xml in the soap body.

  It's easy, there are several ways to do it, which is one of the easiest:

  http://static.SpringSource.org/spring-WS/sites/1.5/reference/HTML/client.html

  Sabrina wrote:
  and how to make the processing of the message in the proxy services layer.

  to transform the messages, that you must use a mixture and a football match of the OSB "Message Processing" actions

  http://download.Oracle.com/docs/CD/E13171_01/ALSB/docs30/Userguide/modelingmessageflow.html#wp1070403

  and XQuery or XSLT or both called within your proxy actions.

  Kind regards
  Tony

• We have problems with Adobe Acrobat DC - document cloud services and how it relates to the HIPAA.  Everyone is working through these issues?

  We have the Cloud of Document with Acrobat DC services issues.  We are considering turning off the cloud feature to stay in compliance with HIPAA.  Everyone is working through these issues?

  Hi mikem82897618,

  You can view the following link to see what can be done with Adobe Document Services cloud when you work in Acrobat DC:

  Store files online, share & access wherever you are. Adobe Acrobat.com

  Also, visit this link to learn more about how Adobe Document Cloud services comply with HIPAA security standards:

  Signatures digital signatures electronic vs. services of Adobe eSign

  Please specify the same details why you should turn off the cloud feature.

  What and where exactly are you facing trouble?

  Let me know.

  Kind regards

  Ana Maria

• How can we call a proxy of a BPEL process OSB service?

  Hello

  I want to call a proxy of a BPEL process OSB service. Can you please explain the procedure?

  Obtain the wsdl for the service proxy OSB and create webservice parnerlink in this wsdl-based BPEL to invoke service

  To form the wsdl url, copy the URI of the endpoint configured for the proxy service (just click on the proxy service in the console) of the sbconsole - / ATHGPUM_GlidePathService/ProxyService/ATHGPUM_GlidePathProxyService

  Before add >- http://localhost: 8000 / and post append with? WSDL

  The final appearance of the WSDL url like - Http://localhost: 8000, ATHGPUM_GlidePathService, ProxyService, ATHGPUM_GlidePathProxyService? WSDL

  Concerning

  Albin I

• Singleton: OSB services proxy?

  Are OSB services singleton proxy in nature! This means that if 10 requests are triggered for the proxy, is that a single instance of the service proxy one by one process or multiple instances will process requests in parallel?

  From the point of view treatment OSB is multi-threaded by default however for some transports, pollers are singleton. You can consult the section "3.2.2.1 Singleton resources" to the.

  http://docs.Oracle.com/CD/E21764_01/doc.1111/e15022/cluster.htm#i1387638

  Kind regards
  Anuj

• How to restrict access to a single user for a proxy in OSB service

  How to restrict access to a single user for a proxy in OSB service

  A. go to the Proxy Service and click on the Security tab

  B. click on Transport Acess political of control to be edited.

  C. click Add to the terms to restrict users.

  D. in the main list, select the category from the user

  E. give the user name to which you want to give access.

• Epson Workforce 345 while a printer does not print. message that the local print spooler service is not available and I need to restart the spooler.

  All of a sudden my Epson Workforce 345 all-in-one printer will not print.  I get a message that the local print spooler service is not available and I need to restart the spooler.  What does that mean?

  Hello

  Check with the manufacturer of the printer for updated drivers, support and Forums for
  known issues.

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  If there is that no Windows 7 drivers try the Vista drivers if those that exist.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  ===============================

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with your support and the Forums printer manufacturer.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - devices and printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• REST different OSB service response codes them

  Hello

  I am new to SOA/OSB and use 11.1.1.5 version. I have a requirement of creating a RESTful OSB service and the proxy service called several downstream services.

  Based on the response of downstream services messages, I need complete REST service different http response codes. I could able to call multiple services without any problem, but do not know how to generate different service http response codes.

  Thank you all.

  Hello

  Your proxy service based on your answers to your downstream services, you can generate different HTTP response codes with the following.

  Use an activity insert and then fill in the values below.  (Ex: error 404 - not found). Similarly, you can use several activities insertion for different response codes or have a query xquery with response codes various different message response codes.

  Expression:

  {"404"}

  Location:

  as the last child of

  XPath:

  ./ctx:transport/ctx:response

  In the Variable:

  entrants

  It will be useful.

• HTTP through proxy connection

  I am trying to download an image from a Web site through a proxy server.  All the posts seem to refer to this article: How can I open a TCP/IP connection through a Proxy Server?  The only link that works on this article is that of the internet Toolbox, and it offers no help on proxy servers.  I have the Internet Toolbox, but there seems to be no screws that can work through a proxy.  Anyone could do this?

  Basic proxy support is not so difficult. You can change the screws to do that for you. All you need to do is to open the connection to the proxy server instead of on the destination server and change the URI in the HTTP Get request to contain the full URL at the time the name of the server and the path on this server.

  Thus, for example:

  Direct connection to the www.examples.com/mydoc.html

  You open the connection to (usually port 80) on www.examples.com and pass an HTTP GET mydoc.html request. That all screws of HTTP, you can find on the web.

  Connection through a proxy server:

  You open a connection to (any port your proxy uses for example 8080) for myproxy.mydomain.com and pass a www.examples.com/mydoc.html HTTP GET request to the proxy.

  Rolf Kalbermatter

• Please help: System freezes with error message "generic host process for win32 services has encountered an error and needs to close."

  Please can anyone offer help - whenever I start my PC it freezes
  then displays an error message "generic host process for win32 services has.
  encountered an error and needs to close. »

  In this error message, I get more information:

  szAppName: svchost.exe szAppVer: 5.1.2600.2180 szModName: ntdll.dll
  szModVer: 5.1.2600.2180 offset: 000122ba

  more information:

  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\svchost.exe.mdmp
  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\appcompat.txt

  I tried a lot of things: update drivers, run Ccleaner to check the registry,.
  checked for malware, Virus, uninstall xp service pack 3... Is there
  anything else I can try?

  After I clicked through the error messages above appears the taskbar
  Crash, then reappears, but with graphic reduction (gray color)

  I checked "Event Viewer" in "control panel" from here I get
  the following error message:

  Failed application svchost.exe, version 5.1.2600.2180, failed module
  ntdll.dll, version 5.1.2600.2180, fault 0x000122ba address.

  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 73 76 63 ure svc
  0018: 68 6f 73 74 2nd 65 78 65 host.exe
  0020: 20 35 2 2 31 32 36 30 5.1.260
  0028: 30 2 32 31 38 30 20 69 0.2180 I
  0030: 6th 6f 20 74 64 6 c 6 c 2nd n ntdll.
  0038: 64 6 c 6 c 20 35 2e 31 2nd dll 5.1.
  0040: 32 36 30 30 2 32 31 38 2600.218
  0048: 30 20 61 74 6f 20 66 66 0-off
  0050: 73 65 74 20 30 30 30 31 the value 0001
  0058: 32 32 62 61 22ba

  also an another error at the time of the accident

  0000: 42 75 63 6 b 65 74 3 has 20 bucket:
  0008: 31 32 39 36 37 35 38 33 12967583
  0010: 36 0D 0 to 6...

  Fault 129675836 bucket.

  I am extremely grateful for any help, this problem is about to drive me
  crazy!

  I solved my problem...

  To temporarily disable closing kick, after that the warning popup will appear, I went the prompt commands and typed in 'shutdown-a' so I could help out.

  Then I went in under the Application Event Viewer and saw that some services weird I don't need anyway did not start because they had missing information/dll registry info.  It was originally the svchost.exe service to fail (and default recovery for this is to reboot)

  I stopped the weird service (in this case, it was Hello) because I didn't need anyway, and went into the properties of this service and past earlier in "Manual" "automatic".

  Good luck

• GOSA security for OSB service - authenticate weblogic security realms

  Hello
  
  I have a safety obligation adds an OSB service.
  
  The user details are configured in the weblogic security areas. lets say there are ten different users.
  
  I have to protect my service osb using a GOSA strategy & policy must be configured to authenticate the user of the kingdoms.
  
  I am new to GOSA, & I was wondering if this is possible?
  
  May - experts please direct me to the docs or not?
  
  Thank you
  Ganesh

  There is an article KM that iscusses how to put that in place - 1265548.1.

  There are also many messages of the blog describing how to do this, for example

  http://niallcblogs.blogspot.com/2010/07/OSB-11g-and-WSM.html
  http://Tim.blackamber.org.UK/?p=825
  http://jvzoggel.WordPress.com/2011/08/09/using-UsernameToken-authorisation-authentication-OSB/

• How to find the item of menu in response to the message "uncheck"work offline "menu item"?

  I can't get into Firefox and get the message "uncheck"work offo line "menu. I ca't understand how to access the menu.

  The following actions will seek to uncheck work offline:

  • Click on Firefox Button > Web Developer > work offline
  • Click on file > work offline (if you use the Menu bar)
  • ALT + F + W

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.