Contact Search using the IP address

Similar Questions

• Suddenly, when I search using the address field, I am is more directed directly on the site I look for ex-BBC, as I was before. To place a web page

  When I search using the address field, I am is more directed directly on the site I look for ex-BBC, as I was before.

  Instead Google web page appears with a list of proposals, and I have to click on the link to the BBC it to get on the site.

  Ways you can give me the code to insert in the "topic: config" keyword. URL

  r

  Take a look at this module.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/keywordurl-hack/

• How can I use the excpeption address in widows debugging to identify the cause?

  Hello

  I have a windows xp machine crashes randomly.

  I did a debug and wonder how I can identify the driver that is the cause using the exception address.

  Dump below:

  Microsoft (R) debugging Version of Windows 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [E:\Mini072911-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\debug-symboles * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows XP Kernel Version 2600 (Service Pack 3) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 2600.xpsp_sp3_gdr.101209 - 1647
  Computer name:
  Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
  The debugging session: 21:08:37.390 Thu Jul 28 2011 (UTC + 01:00)
  System Uptime: 1 day 11:05:14.187
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .................................................
  Loading user symbols
  Loading unloaded module list
  ..................................................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 1000007E, {c0000005, 874551ad, ba557b04, ba557800}

  Probably caused by: ntkrpamp.exe (nt! KiSwapContext + 2f)

  Follow-up: MachineOwner
  ---------

  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
  It is a very common bugcheck.  Usually the PIN address of exception
  the driver/function that caused the problem.  Always note this address
  and the date of the picture link / driver that contains this address.
  Some common problems are the exception code 0 x 80000003.  This means a hard
  coded breakpoint or assertion was hit, but this system has been started
  / /NODEBUG.  It is not supposed to happen as developers should never have
  breakpoints coded hard in retail code, but...
  In this case, make sure a debugger must be connected and the
  system startup/DEBUG.  This will we will see why this breakpoint is
  happening.
  Arguments:
  Arg1: c0000005, the unhandled exception code
  Arg2: 874551ad, the address that the exception occurred at
  Arg3: ba557b04, address of Exception report
  Arg4: ba557800, address of the context record

  Debugging information:
  ------------------

  EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The memory could not be '%s '.

  FAULTING_IP:
  + 2f
  874551ad f3a4 MOV byte ptr rep are: [edi], byte ptr [esi]

  EXCEPTION_RECORD: ba557b04-(.exr 0xffffffffba557b04)
  ExceptionAddress: 874551ad
  ExceptionCode: c0000005 (access violation)
  ExceptionFlags: 00000000
  NumberParameters: 2
  Parameter [0]: 00000001
  Parameter [1]: 01000000
  Try to write at the address 01000000

  CONTEXT: ba557800-(.cxr 0xffffffffba557800)
  EAX = 00000000 ebx = 875677d ecx 8 = 00000200 edx = 00000000 esi = 8745bb80 edi = 01000000
  EIP = 874551ad esp = ba557bcc ebp = ba557bd4 iopl = 0 nv up ei pl nz na po nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010202
  874551ad f3a4 MOV byte ptr rep are: [edi], byte ptr [esi]
  Reset the default scope

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: DRIVER_FAULT

  Nom_processus: System

  Error_code: (NTSTATUS) 0xc0000005 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The memory could not be '%s '.

  EXCEPTION_PARAMETER1: 00000001

  EXCEPTION_PARAMETER2: 01000000

  WRITE_ADDRESS: 01000000

  FOLLOWUP_IP:
  NT! KiSwapContext + 2f
  80545a1b 8b2c24 mov ebp, dword ptr [esp]

  FAILED_INSTRUCTION_ADDRESS:
  + 2de2faf01dadfc0
  874551ad f3a4 MOV byte ptr rep are: [edi], byte ptr [esi]

  BUGCHECK_STR: 0X7E

  EXCEPTION_DOESNOT_MATCH_CODE: This indicates a hardware error.
  Instruction to 874551ad does not read/write in 01000000

  LAST_CONTROL_TRANSFER: from 87456682 to 874551ad

  STACK_TEXT:
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  ba557bd4 87456682 01000000 00000000 00000010 0x874551ad
  ba557c00 804ef19f 8ad2dd98 87567768 8ad2dd98 0 x 87456682
  ba557c30 80545a1b ba557c88 00000000 00000000 nt! IopfCallDriver + 0 x 31
  ba557c34 ba557c88 00000000 00000000 00000000 nt! KiSwapContext + 0x2f
  00000000 00000000 00000000 00000000 00000000 0xba557c88

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nt! KiSwapContext + 2f

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrpamp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d00d46f

  STACK_COMMAND: .cxr 0xffffffffba557800; Ko

  FAILURE_BUCKET_ID: 0x7E_CODE_ADDRESS_MISMATCH_BAD_IP_nt! KiSwapContext + 2f

  BUCKET_ID: 0x7E_CODE_ADDRESS_MISMATCH_BAD_IP_nt! KiSwapContext + 2f

  Follow-up: MachineOwner

  See you soon

  KeV

  Hi Kev,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• When I do a search using the Firefox browser or Google engine, I want only a page of research. I scroll, FF will now automatically load the 2nd page?

  When I do a search using the Firefox browser or Google engine, I want only a page of research. That I have scroll, Firefox is now automatically load page second, third, etc., as a scrolling down. How can I stop this?

  Could you give the address of the search results page where you get "loading without end? It is not normal that the standard Google search engine plugin that comes with Firefox, but you might have a different plugin.

  Some add-ons have this feature, including those with similar names to the 'autopager"and probably many others. You could review your active extensions on page modules. Either:

  • CTRL + SHIFT + a (Mac: command + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, take a critical look on the list on the right side. I suggest turning off one you forgot to install. Those who have Options buttons may be worth exploring to see if it is a feature, you can disable.

• can connect by using the ip address, but not by using web address settings?

  Try to connect to the internet using access point mobile Windows 7 Firefox browser.
  I can access a Web site by using the ip address using however nothing www.msn.com or whatever it is.
  In the connection to the internet in Network Options window that I have no idea of what to put in there, I have tried auto that nothing works

  (hit the uppercase text - c)

  There servers DNS Setup correctly?

  • http://KB.mozillazine.org/Error_loading_websites#DNS

• That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  A

  Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please

  ▹ System Preferences network ▹ 

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option

  Configure IPv4

  If the selection in this menu is

  Using DHCP

  Click on the button

  Renew the DHCP lease

  Test.

  Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.

  B

  Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:

  1. Change the selection in menu using DHCP.
  2. Change the address assigned manually to one that is not used by another device.
  3. Change the address of the other device.

  Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.

  If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.

  C

  According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.

• iPhone 6s - while trying to search using the result of Safari a padlock before and nothing will be open

  using the iPhone 6 s last updated - when trying to search using the result of Safari a padlock in front of him and nothing does not open in the list below!

  Please wait until a fix is available at Apple.

  Best.

• Impossible to connect to the internet using dial-up modem cricket or network cable using the ip address

  tried cricket a600 but dormant, says it is connected but does not work, I tried modem on another computer and it market, tried by cable network using the ip address, same thing, connected but doesn't work, I tried install sp2, don't work, software reinstalled cricket but samething happens, please help

  Hi Aerostargt

  Your modem is compatible with Windows Vista?

  First of all check the compatibility:

  http://www.Microsoft.com/Windows/compatibility/

  Refer to this Article and follow the steps for your Windows Vista system for the issue of the Modem:

  http://support.Microsoft.com/kb/326681

  You can check these links for more information on troubleshooting network problems:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can you use the IPV6 addressing in Codecs of the CTS?

  Can you use the IPV6 addressing in Codecs of the CTS? Otherwise, any plans for it?

  Thank you

  DR

  Hi David,

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  At present, there is no support for IPv6 in the points of termination CTS or infrastructure but Cisco TelePresence Business Unit can look at it in the future, but are currently not seen or heard anything.

  THT

  Arun

• How to make a call using the ip address

  Hello! I'm very new to telepresence system and wanted to know about calls of one endpoint (Te MX300) to another (Fe SX20) using their IP addresses (public or private). I saw in the configuration guide they make calls through IDs or URIS, and they need to guard/SIP proxy for that, but how can we establish the connection through their ip addresses without additional devices, of the right endpoints?

  Thank you

  Hi Zhomart,

  I assume you want to directly (without using the gatekeeper) call the other end points using the IP addresses.

  It's very simple.

  Use the remote control and punch in the IP address that you want to dial, make sure you only select as a H323 Protocol.

  The composed IP address should also be accessible.

  Kind regards
  Sagar

• Delete and re-create a Service profile using the same address (HBA WWNP) WWNP pool

  Hi guys,.

  I have 8 services created profiles used by esxi boot via SAN. The cause is via SAN boot is very important for me the address of WWNP HBA.

  Now, I need to change the model vNIC used in these services profiles to include the option of the VM in the target.

  But for this I have to delete and recreate the model vNIC.

  I think that the UCS will not allow me to that I have unlink and delete the profiles of 8 services (I may be wrong)

  My question is.

  After I deleted a service profile, what is the best way to ensure that new services profile will be used the same address (HBA)

  used by the deleted profile service. ?

  Thanks in advance,

  My best regards,

  Hey,.

  I don't know why you need to remove the 8 SPs when changes (deletion) are on the vnic/HBA model.

  Address WWNP is being derived from a pool? right?

  What is the order of assignment? Default or sequential

  is this specific to only those 8 servers WWPN pool?

  I did a quick test when I remove model HBA he doesn't remove the vHBAs configured in MS.

  Thank you

  -Slim

• Using the loopback address to identify the IPsec peer

  I have two IOS routers and you want to use the loopback address on the remote router as address such peer recommended in documents such as "Configuration with EIGRP and IPX using GRE Tunneling IPSec."

  On the local router, I identify the remote router via its address and loopback on the remote router, I configure crypto MYMAP map interface S0/0 and BRI1/0 (with nothing configured on the other than the IP address loopback interface)

  When I establish an IPsec tunnel from the remote router, it uses the interface S0/0 as its source address.

  I tried to configure card crypto MYMAP on loopback0 instead of BRI1/0 and S0/0, but it did not work.

  How can I get the remote router to use as source address loopback address?

  Thanks in advance for any help offered.

  Try to use the "crypto-loopback address 0.

  -Dembélé

• When you try to connect to my router using the IP address, he continues to ask for a password of windows security.

  When you try to connect to my router using the IP address, he continues to ask for a password of windows security.  I don't know what it is, I tried recording with every combination I can think.  Can anyone help?

  If you do not know the password of the router, then chances are good that you will need to reset it to the factory settings. Google your model and you should be able to find the instructions.

  I hope this helps.

• I signed up to send Adobe & track today and I used the wrong address for billing. How can I change the email address, or Adobe ID?

  I signed up to send Adobe & track today and I used the wrong address for billing. How can I change the email address, or Adobe ID?

  Welcome to Adobe Send & Track!  Here is a link to update your Adobe ID information: your Adobe ID account management

• use the ip address in listener.ora does not

  Hello
  
  A strange problem in listener.ora, if I use 'localhost', or the name of the computer, then everything is ok, but when I try to use the ip address, then I got an error ORA-12541: listener TNS:no
  
  the listener.ora file that works well
  
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (GLOBAL_DBNAME = HMIHD)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (SID_NAME = HMIHD)
  )
  
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  )
  
  the listener.ora does not
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (GLOBAL_DBNAME = HMIHD)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (SID_NAME = HMIHD)
  )
  
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.183.7.89)(PORT = 1521))
  )
  )
  
  the only change is to use the IP address of the server 10.183.7.89 instead of localhost and if I change the ip address of the computer name, then its also works well.
  
  The server runs on vistual box, I don't know if the machine vistual causes this problem,
  I just want to confirm: I use the IP directly right?
  
  Thank you inadvance!

  Reacted little after you have validated, but authentication Jives agie and my answer has been lost. Not the first time that I lost OTN due issues Jives or descending OTN responses. Well...

  My response was as follows.

  Your listener begins listening using the host name of the server. This binds the 1521 port to all the IP addresses on the server. A new IP address must be created, which will be also automatically supported and connections port 1521 he will be accepted by the listener.

  The AMT ORCL aliases connect to port 1521 on localhost (127.0.0.1 IP address). As the listener listen to all this server IP addresses, the client connection is successful.

  The listener is then replaced listening on a specific IP address. Now the listener only listening on port 1521 on this IP - and no other IP address of this server.

  The alias of tns ORCL now tries to connect using 127.0.0.1 - and this IP address is now supported by the listener. As a result, the connection of the client fails.

  If the tns ORL connection uses the same IP address as the listener, the connection will succeed. The ORCL alias can either use IP address directly, or a host name that will solve in that intellectual property.

  The basic rules are:
  -If the server name is used, the listener use INADDR_ANY indicator socket and tie the port to all the this server IP addresses
  -If the IP 0.0.0.0 is used, the listener also links the Harbour to all the this server IP addresses
  -If "localhost" or a specific IP address is used, the listener will tie the port to only this specific address and no other server IP addresses

  The client to connect, use one of the IP addresses that the listener is listening. The customer can use:
  -the host name so that the intellectual property (the host name must resolve to the IP address via the file DNS or hosts )
  -l the address real IP itself

  Use the following command in Windows to see what IP addresses and ports, the listening process is listening:
  Netstat-b - n tcp Pei