use the ip address in listener.ora does not

Similar Questions

• Windows 7 Installer error "Setup could not use the existing system partition because it does not contain the required free space.

  Repeatedly tried to install the upgrade to windows 7 and pure install and get the error message on all partitions available "Setup could not use the existing system partition because it does not contain the required free space.  All 3 partitions on a single disk have over 90 GB and separated from the disc more than 65 GB of free space according to the properties of the disk and initial screen during installation.  Tried to reformat a partition empty all reinstall Xp sp3 without result.  What can I do?

  Remove the data cable of all drives except the drive that you want to install Windows 7 on.

  Remove all external devices.

  Delete all partitions on the disk leave all of the disc as "unallocated".

  Boot from the Windows 7 DVD and then install, when you reach the point where it asks you to select a drive, click the "Advanced" option and create a new partition (at least 50 GB) to install Windows and continue with the installation process.

  Also: http://social.technet.microsoft.com/Forums/nb-NO/w7itproinstall/thread/1b1adc74-3d94-4897-a3c1-7aabde44fe4b

  JS
  http://www.PAGESTART.com

• During the installation of Windows 7 Ultimate, get error, "the installation program could not use the existing system partition because it does not contain the need free space."

  When installing win7 ultimate, {install} error message indicates "Setup could not use the existing system partition because it does not contain the free space required... I have 500 GB free, ram 4 GB 2.4 ghz quad... any help?"

  If you have any external storage devices such as external hard drive or thumb drive, unplug them, they might interfere with installation.

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• vSphere client using the name Netbios on ESXi host does not connect using the credentials of a Windows session

  I have 3 ESXi 5.5 hosts, all connected to a single server vCenter, where we try to authenticate directly to the host by using the windows logon credentials. I have installation of the Administrators group of ESX and filled with the admin accounts that I want to be able to authenticate to the host. The Netbios name of the domain is tstdomain (for example) where the domain name is tstdomain.com. If I connect directly to a host and check the checkbox 'Use Windows Session Credentials', the vSphere client will default by using the Netbios name of tstdomain\adminusername and the connection will fail indicating that the username and/or password is incorrect. If I enter the domain name of tstdomain.com\adminusername, I am able to connect to the host without error.

  Does anyone know how get past that this matter have the vSphere client uses the domain name or to use the Netbios name and connect with the credentials to active directory? I looked by editing the file/etc/hosts and checked that the SPN of the host is correct in active directory with the command hostname setspn - l, with no luck on one. I also tried to change the field of research for the Netbios name of tstdomain rather than the tstdomain.com domain name, also did not work.

  Thanks in advance for your suggestions on how to correct the problem.

  Seems that this issue was due to a slow network and the connection timeout when you try to talk to the domain controller. I am able to connect with windows creds now, but the connection is very slow. I increased the default period of 30 to 60 seconds to help work around the problem.

• Function of the file/etc/Upload of an open file of the application, using the file as a utility Explorer, does not work on my Win7 PC.

  If I run the file Explorer (open) by itself right clicking the my computer icon on the desktop, or work when I double click on the shortcut to My Documents on the desktop, all files are visible (except the system and hidden files, by default, of course). I don't think it's File Explorer itself, for reasons described. It must be an add-on, or ACCELERATOR, as it is called when this functionality is provided for other applications or the Internet Explorer browser. 10, IExplorer even the fact when I want to attach a file to an e-mail in the tab of the mail.live.com browser or dialog box that prompts for a download location and the source file. The only place where I can browse the file Explorer to display its content, is the office. I have automatic updates for all my Windows software installed on my PC, as well as for all my applications. This happened for months, and the only work around is to copy the files to the desktop, take them out there in my app/browser and then delete. It's a pain in the thigh not only because of the increased workload, but also because my OS is running on a very small SSD drive (128 GB), reserved for the windows and the user * he pours on the system drive. All this extra activity write/erase on my system drive is exhausting the ability of my SSD FLASH prematurely. All my software is installed (when installing allows) on my D: drive, but it has been so since I ran Windows 98, it is NOT the cause of the problem. Any help will be appreciated!

  Hello

  We will analyze and identify the cause of the problem.

  Method 1:

  You can run the Fixit described in the article:

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag

  Method 2:
  

  Safe mode

  
  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Response with status so that we can help you.

• vSphere 5.5 using the uplink of LBT group that does not have a good way

  We use LBT since our recent deployment, which is new for us.  Everything seemed fine and dandy, until recently the VMs began dropping their connectivity to what looked like at random times.  The first fix out the door had to disconnect and reconnect the vNIC for each virtual computer.  Sometimes, it took a few tries before it worked.  We discovered that LBT moved VMS to the other group of uplink, which was a physical affair.  Unfortunately, someone didn't configure the port correctly on the remote switch, so while link came, he could not access the VLAN correct.  My question is, why the LBT would move virtual machines to an uplink group which did not have a good way?  He seeks only a physical link?  Looks like this problem waiting to happen.  Or, more likely, we have something misconfigured.  Any help would be wonderful, I don't like the idea to return to etherchannel or LACP with IP hash with blades chassis.  Thank you!

  My question is, why the LBT would move virtual machines to an uplink group which did not have a good way?

  Is that a "good path" can mean many different things in different circumstances of different points of view, if it's out of reach for LBT. It will be only on the physics of the status of the link. There is beacon probing too which can detect switch upstream outages but it can be used only with at least 3 vmnic uplinks and it has a few disadvantages, see:

  http://virtechgeek.com/2013/05/06/beacon-probing-vSphere-network-policy/

  http://thomaslowblog.blogspot.de/2011/10/vswitch-network-failover-detection.html

  You can use the dvSwitch health check feature to make sure that all the natachasery of all the hosts connected to a dvSwitch can access the same VLAN. It will not prevent LBT to move virtual machines, but it will at least raise an alarm if a bear cannot access a VIRTUAL LAN. Take a look at this article:

  http://wahlnetwork.com/2012/08/27/new-5-1-distributed-switch-features-part-1-network-health-check/

• [TRE] I tried to use the system of TAR utility (compress does not)

  As above, I use system() to call the "TAR" command, it works with - cf, I tried to add compression using - z and the archive has not been created, I use test.tar as the example of name of archive and the file has been created, but it seems to be empty, use it without work - z if.

  zip is there but in/usr/bin, so you can compress in a separate step.

• The update of creative cloud worked for Photoshop.  However, it shows my LR 5.4 'up-to-date' and the CC version will not load.  Advice has been uninstall LR using the program uninstall Adobe, but it does not exist on my iMac with the Mavericks.  I am supp

  Sorry for the long title.  I thought that I was actually asking.  Why can't I update my LR LR CC 5.4?  I have an iMac 27-inch running the Mavericks.  I have a lot of space on my hard drive and have 16 GB of RAM.

  Long titles seem to happen a lot since the last forum updated software isn't just you!

  There is no CC Lightroom. You get the latest version (currently 5.4) with creative cloud, and the CC app so right to say that your LR is up-to-date. Unlike most other Cloud creative applications and Photoshop, Lightroom is not labelled as 'CC' because it is also available separately as a product standalone perpetual license. When 5.5 (or 6.0 - or even a CC version only) is available in the future, the CC app should invite you to update, and then in the meantime, you good to go.

  M

• someone is using my email address to send emais. I tried to reset my password but I am not able to. He says that the answer to my secret question does not.

  someone is using my email address to send emais. I tried to reset my password but I am not able to. He says that the answer to my secret question does not. I know I'm getting the correct ansewer. Help, please.

  Hi, Catherine.

  You'd better post in the Windows Live Solution Center-Hotmail like that is dedicated to Windows Live Hotmail.

  If you have not implemented alternative methods to check your Hotmail credentials, I suggest do it after your account is returned.  For more information, see Security Hotmail to protect and recover your account .

  Good luck!

• When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle

  CARS: 2 nodes with Oracle single Client Access name (SCAN)

  OS: OEL 5.4 64-bit

  Version: 11.2.0.3

  When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle. I noticed that the service is in place and properly configured (client tnsnames).

  servicioBD = (DESCRIPTION = (LOAD_BALANCE = yes) (ADDRESS = (PROTOCOL = TCP)(HOST = scanvip.domain1.local) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = serviceBD) (FAILOVER_MODE = (TYPE = SΘLECTIONNER) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))

  serviceBD service

  SQL > select name, failover_method, failover_type, failover_retries, goal, clb_goal, aq_ha_notifications from dba_services where service_id = 3;

  METHOD NAME TYPE PURPOSE CLB_GOAL AQNOT ATTEMPTS

  ---------------------------------------------------------------- ----------- ---------- -------- ---------- -------- -----

  serviceBD BASIC SELECT 180 NO LONG YES

  But when I do not use the service created for the tnsnames file SCAN, it's that if I directly put tnsnames to connect to any work of two nodes very well.

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.10)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  Or

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.11)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  I have also observed the following (cluvfy).

  1 all LISTENER_SCAN running node 1

  2 there is no TCP connectivity

  3 the error message is obtained PRVF-5713

  [grid@rac1 ~] comp cluvfy $ scan - verbose

  Check scan

  Checking the single Client access name (SCAN)...

  ANALYZE the running node name?      ListenerName Port running?

  ----------------  ------------ ------------  ------------  ------------ ------------

  scanvip.Domain1.local 1521 LISTENER_SCAN1 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN2 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN3 true true rac1

  Checking TCP connectivity to ANALYZE listeners...

  Node of ListenerName TCP connectivity?

  ------------ ------------------------  ------------------------

  RAC1 LISTENER_SCAN1 no

  RAC1 LISTENER_SCAN2 no

  RAC1 LISTENER_SCAN3 no

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.17) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.19) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.18) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  Check the resolution settings of name to 'scanvip.domain1.local '...

  SCAN the IP address status comment name

  ------------ ------------------------ ------------------------ ----------

  scanvip.Domain1.local 10.210.2.18 spent

  scanvip.Domain1.local 10.210.2.19 spent

  scanvip.Domain1.local 10.210.2.17 spent

  Verification of the installation program ANALYZES VIP and the listener has failed

  The analysis check failed on all specified nodes.

  Could someone help me please.

  The solution was to restart scan_listener.

  srvctl stop scan_listener

  srvctl start scan_listener

• How can I use the excpeption address in widows debugging to identify the cause?

  Hello

  I have a windows xp machine crashes randomly.

  I did a debug and wonder how I can identify the driver that is the cause using the exception address.

  Dump below:

  Microsoft (R) debugging Version of Windows 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [E:\Mini072911-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\debug-symboles * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows XP Kernel Version 2600 (Service Pack 3) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 2600.xpsp_sp3_gdr.101209 - 1647
  Computer name:
  Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
  The debugging session: 21:08:37.390 Thu Jul 28 2011 (UTC + 01:00)
  System Uptime: 1 day 11:05:14.187
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .................................................
  Loading user symbols
  Loading unloaded module list
  ..................................................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 1000007E, {c0000005, 874551ad, ba557b04, ba557800}

  Probably caused by: ntkrpamp.exe (nt! KiSwapContext + 2f)

  Follow-up: MachineOwner
  ---------

  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
  It is a very common bugcheck.  Usually the PIN address of exception
  the driver/function that caused the problem.  Always note this address
  and the date of the picture link / driver that contains this address.
  Some common problems are the exception code 0 x 80000003.  This means a hard
  coded breakpoint or assertion was hit, but this system has been started
  / /NODEBUG.  It is not supposed to happen as developers should never have
  breakpoints coded hard in retail code, but...
  In this case, make sure a debugger must be connected and the
  system startup/DEBUG.  This will we will see why this breakpoint is
  happening.
  Arguments:
  Arg1: c0000005, the unhandled exception code
  Arg2: 874551ad, the address that the exception occurred at
  Arg3: ba557b04, address of Exception report
  Arg4: ba557800, address of the context record

  Debugging information:
  ------------------

  EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The memory could not be '%s '.

  FAULTING_IP:
  + 2f
  874551ad f3a4 MOV byte ptr rep are: [edi], byte ptr [esi]

  EXCEPTION_RECORD: ba557b04-(.exr 0xffffffffba557b04)
  ExceptionAddress: 874551ad
  ExceptionCode: c0000005 (access violation)
  ExceptionFlags: 00000000
  NumberParameters: 2
  Parameter [0]: 00000001
  Parameter [1]: 01000000
  Try to write at the address 01000000

  CONTEXT: ba557800-(.cxr 0xffffffffba557800)
  EAX = 00000000 ebx = 875677d ecx 8 = 00000200 edx = 00000000 esi = 8745bb80 edi = 01000000
  EIP = 874551ad esp = ba557bcc ebp = ba557bd4 iopl = 0 nv up ei pl nz na po nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010202
  874551ad f3a4 MOV byte ptr rep are: [edi], byte ptr [esi]
  Reset the default scope

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: DRIVER_FAULT

  Nom_processus: System

  Error_code: (NTSTATUS) 0xc0000005 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The memory could not be '%s '.

  EXCEPTION_PARAMETER1: 00000001

  EXCEPTION_PARAMETER2: 01000000

  WRITE_ADDRESS: 01000000

  FOLLOWUP_IP:
  NT! KiSwapContext + 2f
  80545a1b 8b2c24 mov ebp, dword ptr [esp]

  FAILED_INSTRUCTION_ADDRESS:
  + 2de2faf01dadfc0
  874551ad f3a4 MOV byte ptr rep are: [edi], byte ptr [esi]

  BUGCHECK_STR: 0X7E

  EXCEPTION_DOESNOT_MATCH_CODE: This indicates a hardware error.
  Instruction to 874551ad does not read/write in 01000000

  LAST_CONTROL_TRANSFER: from 87456682 to 874551ad

  STACK_TEXT:
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  ba557bd4 87456682 01000000 00000000 00000010 0x874551ad
  ba557c00 804ef19f 8ad2dd98 87567768 8ad2dd98 0 x 87456682
  ba557c30 80545a1b ba557c88 00000000 00000000 nt! IopfCallDriver + 0 x 31
  ba557c34 ba557c88 00000000 00000000 00000000 nt! KiSwapContext + 0x2f
  00000000 00000000 00000000 00000000 00000000 0xba557c88

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nt! KiSwapContext + 2f

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrpamp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d00d46f

  STACK_COMMAND: .cxr 0xffffffffba557800; Ko

  FAILURE_BUCKET_ID: 0x7E_CODE_ADDRESS_MISMATCH_BAD_IP_nt! KiSwapContext + 2f

  BUCKET_ID: 0x7E_CODE_ADDRESS_MISMATCH_BAD_IP_nt! KiSwapContext + 2f

  Follow-up: MachineOwner

  See you soon

  KeV

  Hi Kev,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Impossible to connect to the internet using dial-up modem cricket or network cable using the ip address

  tried cricket a600 but dormant, says it is connected but does not work, I tried modem on another computer and it market, tried by cable network using the ip address, same thing, connected but doesn't work, I tried install sp2, don't work, software reinstalled cricket but samething happens, please help

  Hi Aerostargt

  Your modem is compatible with Windows Vista?

  First of all check the compatibility:

  http://www.Microsoft.com/Windows/compatibility/

  Refer to this Article and follow the steps for your Windows Vista system for the issue of the Modem:

  http://support.Microsoft.com/kb/326681

  You can check these links for more information on troubleshooting network problems:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• can connect by using the ip address, but not by using web address settings?

  Try to connect to the internet using access point mobile Windows 7 Firefox browser.
  I can access a Web site by using the ip address using however nothing www.msn.com or whatever it is.
  In the connection to the internet in Network Options window that I have no idea of what to put in there, I have tried auto that nothing works

  (hit the uppercase text - c)

  There servers DNS Setup correctly?

  • http://KB.mozillazine.org/Error_loading_websites#DNS

• That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  A

  Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please

  ▹ System Preferences network ▹ 

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option

  Configure IPv4

  If the selection in this menu is

  Using DHCP

  Click on the button

  Renew the DHCP lease

  Test.

  Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.

  B

  Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:

  1. Change the selection in menu using DHCP.
  2. Change the address assigned manually to one that is not used by another device.
  3. Change the address of the other device.

  Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.

  If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.

  C

  According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.