3G does not work in Portege Z830

Similar Questions

• Toshiba Digitizer Pen does not work on Portege Z10T-A

  I have a Portege Z10T.-a.

  I bought new Toshiba Digitizer Pen PA5133U-1EUC.

  The link below, this pen is compatiable on my laptop. But it does not work. Y at - it no adjustment or the driver of this pen?

  http://www.Toshiba.com/us/accessorie...s/PA5133U-1EUC

  I think you should check if the device supports the digitizer and if so, you will need to calibrate the pen and touch settings.

  For this I recommend that you review the Microsoft FAQ on pen and touch settings:
  http://Windows.Microsoft.com/en-pH/w...Sked-questions

• Touchpad does not work on Portege R100

  Hello

  I have recently boght a Toshiba Portege R100 without any installation CD Windows XP Home Edition worked fine but the touchpad is not.

  I installed additional drivers of Toshiba. Now, I'm able to adapt to all kinds of things about the Touchpad, but still it does not work. I was also running Knoppix 5.2 since July 2007. Same problem with Linux.

  Have I not a faulty laptop? How will I know, please?

  Have you tested the touchpad with Windows XP?
  You connected an external USB mouse and you have the same problem?

  Normally the touchpad should work without a driver, they are part of the operating system.
  You can disable/enable it with FN + F9.
  I'm not sure, but you can also enable/disable the touchpad in the BIOS.

  It could be that the touchpad is defective, but ask an ASP for help. They can check the necessary parts for laptop and Exchange.

• Re: Button on the upper right does not work on Portege R500

  Hello

  At the top right of my keyboard (Portege R500) theres a button that shows a place in the foreground with a Sun in the background.

  I guess it is a kind of glare/brightness button to be used outdoors.
  However pressing this does nothing.

  Can anyone suggest what's this button and how do I make it work?

  See you soon,.
  H

  I think you're talking about the outdoor switch.

  This backlight button on / off turns on and off the display backlight s.

  Are you sure that you do not notice any difference this button?

  If you turn off the back light outside in good weather, you can use the computer for an extended period.

  Maybe I m wrong, but usually he should be able to configure this button in the power OS Options.

  Greetigns

• FN + F5 to change device display does not work on Portege R600

  Portege R600-11 b Win 7 ultimate
  I wanted to show my photos on the TV using the vga output. Connected everyting, pressed FN + F5 and watch LCD dialog box. Support again, still lcd. tried the keys of direction, no joy, still lcd.

  plugged my trusty R100 instead of the R600 and bingo, works very well

  I'm sure this used to work on the R600 90%. (Actually, what I remember is that it just worked first time with no keyboard at all operations).

  Someone suggest anything happy?

  Steve

  It seems that your TV is not recognized correctly.
  Did you use FN + F5 option in the past?
  Are you using the original pre-installed OS that you got with your laptop Portege?

• Put Hibernate & standby does not work on Portege 2000

  I recently bought a refurbished Portege 2000. It did come with any documentation or Toshiba software installed. I grabbed what I thought good to the download section of the support page and that you have installed.

  I have the Toshiba console works, the utility of accessibility and performance of the Intel thingy. Energy saving works now and so do all the functions of the shortcut out of standby and standby key extended (FN + F3/F4).

  Have I missed something in the download section or y at - it a particular order, to which I should install?

  Thanks in anticipation,
  Coastal

  Hello

  As a first step, we should clear the issue of operating system, I assume you are using Win XP.
  Am I wrong? Have you installed the electricity saving for Win XP right?
  Two different Power saver utilities are available on the page. 5.04.00 and 5.01.00.
  I advise to use the last being!

  The other FN keys work correctly and therefore, it seems that the important applications, such as the common modules and Hotkey utility have been installed correctly.

  I think that it s just a matter of adjustment. Hibernation is disabled by default.
  If you want to use the FN + F4 you must first enable it in settings of standby power.
  The same should be done with standby mode which can be used with FN + F3

• Sound does not work on Portege R100

  Hi, I already downloaded all the drivers of the home page, but it can stil no sound from my Portege R100.

  Everything was perfectly installed.

  So please help me! I don't know what to do now.

  Greetings

  Johannes

  Add: Please help. I downloaded just now, but it seems as if none would have the right driver for soundcontroller. What can I do?

• Portege Z830 - X 11 - enter key does not work on the logon screen

  suddenly, the Enter key does not work in the scrreen of connection (win 7 64 bit, toshiba portege Z830 - X 11), which some do not login with password.

  The on-screen keyboard sends the "enter" or the other.
  When in safe mode, everything works as it should.

  I solved this problem by disabling the password for the account, but I don't feel well in this situation.

  Help, please...

  Have you tried an external USB keyboard?
  Do this!

  Not very well why the ENTER key does not work on the login page, but I guess its problem of keyboard.

• Portege Z830 - Bluetooth does not work

  My Portege is about a month. I have not modified it somehow; It is on windows 7 pro. The Bluetooth worked first; now he doesn't. I have the 'red' in the bottom icon on the right; questioned on this matter, it is said that Bluetooth is not ready.
  To the help of Bluetooth settings and the wizard, it is said the module is disabled and cannot communicate with him.

  I used Fn + F8; It's on. I used the button "Enable" in the bluetooth settings. It is also on.

  In the RFCOMM and Radios Bluetooth devices Manager, suffice to say that it works properly and the software is the most recent. The same for Bluetooth ACPI.

  I also uninstalled and then reinstalled, all the devices mentioned above; and it still does not work (and it is still on). The next step for anyone?

  Can you please check settings in the preinstalled ConfigFree tool?
  Click with the left button of the mouse on ConfigFree symbol in the taskbar. At the bottom of the window, you should see list BT module. BT is listed as enabled too?

• Portege Z30-C-12Z cam does not work with Win 10

  Hello!
  I have a problem with my Portege Z30-C-12Z. Camera in win10 does not work.
  Error code: 0xA00F4273. Have tried all the following steps: http://answers.microsoft.com/en-us/w...0-71c220c123a9 and like many more check the BIOS etc.

  According to me, I tried and everything, checked it please help!

  Try this:
  Type of storage in the search window and go to the storage system settings page. Make sure that the economy sites point to existing folders.
  I moved the files on a SD card and the camera could not find the folder of photos. Also, I've seen the suggestion to check that the folder of photos contains the security settings to allow access.

  If still no good, remove the driver of the webcam from the Control Panel, then let Windows Update to install a driver for the webcam update.

  Reinstall the camera application can also help.

• Portege Z30-A-189: microphone does not work with the connected headphones

  Hello
  I have a Portege z30-a-189 ultrabook.
  Today, I wanted to use Skype with a headset for the first time and I noticed that when the headphones are connected, the internal microphone does not work.
  When I connect headphones that have the microphone, it works, but I want to use headphones that do not have microphone.
  I chcecked all in windows 10 sound settings.

  If you come on a site back, you will find the solution. (see my last post - realtek settings)
  https://Forum.Toshiba.EU/showthread...-in-headphones

• Portege R500 - keyboard USB Legacy support does not work

  I have a Portege R500-124

  I use it to dock in the office and the lid is closed, so I need to enter a password for DriveCrypt and generally control the boot/BIOS from a USB keyboard. But no matter what I set the setting that is inherited from the USB in the BIOS, the USB keyboard does not work. I tried the keyboard connected directly to the R500 when undocked and it's all the same. I also tried BIOS 1.6 and that's all the same.

  USB keys are working and I can boot from them, but no work of measures (for example, F12 to choose the BOOT device) keyboard - the R500 doesn't seem to have the functional USB keyboard support until an operating system (Windows or Linux) has started.

  Any ideas?

  Ian

  > .the R500 does not appear to be the functional USB keyboard support until an operating system (Windows or Linux) has started.

  I can't confirm this, but I'm afraid you're right about that.

• Portege M800 - Exposed sensitive Touchkeys does not work

  I am owner of the Toshiba Portege M800-105. Everything done his work. After 2 months working on it, my sensitive touchkeys exposed next to the POWER button does not work. After that I uninstalled 'Vista-value-added-package' everything works correctly. Why? Now my FN keys do not work or are disabled. Why?
  Before uninstalling the package, the first button next to the power button had to function to turn off the backlight of the Logo, the touchkeys senitive one of my touchpad. NOW he cut the sound! Weired fairy if you aks me. How do I challenge my buttons up to factory settings and make function keys FN?

  I reinstalled the value added package again, and have the backup problem as before: the first two buttons next to the power button does not work!
  Unter the Application: Thoshiba Button supports, for the first two buttons there are no keys depositd/marked so that I can change the configuration here.
  FN keys work after installation of the package, but not the sensitive keys! Please who can help me?

  Value added package has small programs. One of them is the Toshiba button Support. Walker I have uninstall it everything works. When I install it, nothing works.

  Thank you for the help on [email protected]

  Post edited by: Togan_1

  Hello guys

  This is really strange. I put t really know what happen on your laptops. The fact is that these buttons are controlled by the software. If I remember well he called support Button or a button control and she is part of the package of added value.

  VAP contains several different tools and utilities. When you remove the VAP, it will be removed the responsible application of the functionality of FN (Flashcards), and this is the reason why the FN doesn't work anymore.

  So, theoretically everything should be OK when you install PPV again. Again theoretically. Why you still have this problem I put t know and I don t believe that no one can say for sure. Maybe some registry entries are corrupted now? Who knows?

  I presume that you don t want to use a more radical solution and do clean install of the new OS, but it can certainly help. With own OS pre-installed (factory settings) everything works well again.

  In the end, I must say that I use Satellite U400 (similar to your Portege) almost 6 months now and all the buttons work correctly. I always use the Vista version and I n t made no changes. It works well.

• Portege Z930 - display driver does not work properly

  Hello

  We have a Portege Z930 with Windows 7 64 bit in use where the Intel display driver seem to work fine.

  First problem is the slow presentation on screen - if we open a (simple JPG) photo and move the window, the frame window break during the move and showed very weird.

  Then, we have installed a U3.0 dynadock docking for the use of two external displays more. This method works even worse. To the docking station, we used the driver from the CD supplied in the delivery and connect to a USB 3.0 connector.

  On starting switching on 2 screens instead of internally for computer laptop screen does not work - and we use workaround of using an extended desktop on all 3 displays (2 external and internal display for laptop as the third).

  In Internet Explorer, it should turn off GPU Rendering and use Software Rendering rather because otherwise, we observed critical irregularities on the external screens (with 2 Windows Open the screen froze or could not display Windows Mobile). However the display isn't satisfactioning.

  We have tried 3 different versions of the recommended Driver Intel which is also offered by Toshiba to download; We loaded it is there and also 2 versions more (a more recent, one older) Intel directly.

  So, how can we get this working properly?

  Thanks in advance and best regards,
  N. Cochems

  More importantly. Make sure you have Service Pack 1 installed Win7. New laptops have problems running in win7 RTM (without service pack).

  It seems that Windows uses the standard VGA driver instead of the Intel driver. Uninstall all display drivers from Control Panel-> programs and features and then go to the Toshiba website and install the utility Intel Chipset then the Intel display driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new software v7.xx DisplayLink driver fixes several issues found in v6.xx drivers.

  Verify that the Intel drivers are installed properly in Device Manager.

• Portege 7220CTe he's - USB dock does not work properly

  I have a portege 7220, with Dock he's using windows 98se.
  I have 2 usb ports on the dock, one that I use for mouse, 2nd I use for hard disk USB, cards memory sticks etc. When I start with 2 installed, often they will not work. Installing after startup does not work either. MILADI repairman told me to bring pc + dock in because they think it's a hardware problem. But sometimes, the usb works with 2 installed users. Who can help me? BIOS (ACPI version 1.70, 29/09/00).

  Hi Buk

  Trust me on this path is not easy what's happening with your USB ports.
  Do you have similar problems if you use the USB ports on Portege itself?

  As you know the signal USB is just loop through and there may be a problem with the circuit of the port replicator.

  I really put t think you will be able to solve alone.

  Good luck!