That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

Similar Questions

• When I scanned a document today, he showed that another program or computer using the hp networking, imaging device

  Original title: printer-scanner

  My printer was scanning documents perfectly until yesterday, but when I scanned a document today, he showed that using another computer or program

  The Imaging Network hp device.can someone help me? My printer is HP deskjet f2418

  Hi Dan,.

  Were there any changes made on the computer before the show?

  To solve the problem with scanner, refer to the article and try to follow the steps:

  "Another program has control of the scanner" Message appears on the computer when scanning

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02544730&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=4021192#N78

  It will be useful.

• "Another device on the network use my ip address".

  I tried to check my mail and could not and got this message "another device on the network use the IP address of your computer." I have never seen it before. He also said that I could change the IP address, if I continued to have problems. I bought this iMac and used Migration to transfer all the stuff from my old iMac that is still used. That was months ago, but I never had this message up to now. So should I change one of the IP addresses? And if so, how is that done?

  http://osxdaily.com/2010/09/19/another-device-on-the-network-is-using-your-Compu ters-ip-address.

• HP Officejet scan cannot be run, error "Scan cannot be performed because another program or computer uses the network device.

  Hello everyone,

  After you have installed Windows 8 on my desk, I lost the ability to scan with HP (Officejet 8500 pro wireless) solutions Center. Wen I click on scan (rather photo or document) I get a message: "Scan cannot be performed because another program or computer uses the network device. There is a little information on the HP site. I've tried all the suggested solutions, including several install and reinstall the HP software. The printing part works very well, and I can scan with other programs directly using the WIA driver. Now I scan documents to pdf authorizing searches, who wants me that this question be set quite often. Currently, I use my laptop for that. Everything works very well with Windows 7.

  Any help would be appreciated.

  Thanks, Johann

  I contacted HP about this specific problem.  They informed me that it is an upgrade of Windows 8 that Twain issue and they do not support this problem.  Reinstall the current drivers of hp does not help.

• My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam. Skype device code 43 usb video.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  Hello, Aadi467,

  A device driver has notified the operating system that the device failed.

  Run the diagnostic tool of hardware devices do not work or are not detected in Windows on the Microsoft Fix it Center.

  You can also uninstall the software from Cyberlink.  There is a found here download link to reinstall the software after restarting the computer.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/lost-my-CyberLink-and-UCAM/TD-p/760367

• another computer on the network is using the same IP address that your computer uses. Each computer on a network must have a unique IP address. To resolve this problem, run Network Diagnostics

  another computer on the network is using the same IP address that your computer uses.

  Hi johnnyredd

  
  1. is connected to a domain or a server computer?
  2. what operating system is installed on the computer?

   

  You can refer to the link below and check if the information provided will help you-

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-there-is-an-IP-address-conflict-message

   

  Check out the link below to identify the operating system installed.
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

   

  I hope this helps.

• When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device. How can I work around this problem?

  When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device.  How can I work around this problem?

  Hi ejp70,

  1. did you of recent changes on the computer?

  2. to when was the last time the scanner was working fine?

  3. you have any other printer\scanner connected to the computer?

  If you have any other printer\scanner connected to the computer, disconnect them and check if it works.

  I suggest that you uninstall and reinstall the scanner to the computer, also make sure that you install the latest drivers for scanner on Canon website.

• 9.3.2 iOS that wake up my iPhone and iPad a cellular connection. They connect to my wifi until I use them. This means that the activity of the Baker all arrives on my data connection and not my wifi network at home. How can I fix it.

  iOS 9.3.2

  My iPhone and iPad wake connected to cellular data so that I have a home network and expect things to happen on my network home. It costs me in the case of the background activity while I'm SLEEPING on my cell the att network connection. How can I fix?

  Thank you

  Barb

  Maybe a WiFi Assist. On the devices go to settings > cellular > scroll all the way down > Wi - Fi help > Toggle Off. See if that helps.

• Can I have a home network that is a mix of wired and wireless, and be able to use devices connected to the pc without wire while working from a pc cable and the network map will show all?

  I have a router Linksys Wireless-N-large band with 4 catches on and 1 ethernet to my internet modem cable. Wireless connections work well in my relatively small house. Rather than to buy several USB wireless receivers, I thought just to use the ethernet # 1 and plug it into my computer close to the router.

  Hello

  Any computer that can connect to the router (wire or wireless) can be part of the same network.

• That means the (3) in a network connection

  I noticed that sometimes I'll see a Mac connected on a network from parenthesis after its name, as in Bob's Mac (3).

  What does the (3)?

  This can be a cause or an index of network problems?

  If so, what would be the cause or the index.

  Thank you

  M.

  Typically, this means that there is the third incarnation of the "Bob Mac' your system has seen.

  The sidebar is filled with servers that are available on the local network. Over time the BONE songs which sound servers view, but if she sees a machine with the same name as another device but, for some reason, it don't think it's the same device, it adds an integer name of the server.

  Typically, this would indicate that there are three machines on the network called "Bob Mac", but it could also be a flaw in the heuristics that make the OS think that is not the same "by Bob Mac" has been seen previously (either because of a bug, perhaps a system upgrade, etc.).

• in the finder under devices, I see a remote disk. This means that someone has access to my computer and how to find and get rid of this or is it a disk bound one of my devices?

  In the finder under devices, I see a remote disk. It means someone has access to my computer?, and how find and get rid of it. Or is it a disk bound one of my devices? I have an iMac El Captan10.11.3

  # Remote disc is a feature that allows you to use the CD drive from another computer.

  It is always in the Finder, and when Setup a disc in another computer it will appear.

  It is perfectly normal.  No one has access to your computer.

  You can read more here:

  Use the CD or DVD drive from another computer with your Mac - Apple Support

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• Can I use the timestamp to a global variable that is published to network to reduce network traffic?

  I would use a couple of network-has published the global variables that will contain large groups of data.  I want to host them on a device, but read them in several - consider a distributed control system.  The data will be updated very rarely, but when that happens, I want that all my GUI to know quickly.  I have all the GUI, simply read data 4 x per second (which would be fast enough), but I was wondering if there is a more elegant solution (always using global variables).  If I read only the timestamp 4 x per second each of the HMI, compare to the last reading and then interrogate the integer variable if timestamps are different, which will require fewer resources that just enter the integer variable each time?  In other words, the read timestamp uses the same amount of resources as the reading of the entire variable?

  With really simple code, assuming that the cluster "Data" is big enough, made...

  .. .get me no benefit on...

  mark3545 wrote:

  Which means that they are already doing what I want anyway, no?  If the reader is updated when it changes the writer, I can survey as often I want without increased traffic, correct?

  That is right.

• Impossible to scan: "another program or computer using the HP imaging device.

  Original title: hp scanning problem

  I can't seem to find anything on the hp site regarding my being not scan with the center of Solution because that 'another program or computer use the HP imaging device ".  I have my Officejet 6500 connected via an ethernet cable in my Linksys routeras is my internet modem.  Someone has an idea?  I can print fine; I can't scanner to work other than the program with the paint.  Thank you for coming so someone can help out me.  -Steve M

  Hello

  I suggest you to visit the following links: http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Networked-C6280-and-Windows-7-64-bit/td-p/217282

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Windows-7-Professional-and-HP-printer-software/TD-p/224258

  I hope this information is useful.

• 2 two IP address are reported to use my home network and both are reported to be in the same IP addresses. I have computert that one and only one account with the provider.

  My computer is to launch my a note that I have another computer on my network using the IP, I do not understand.

  I have a stereo Kardon Karmon, a drive Sony DVD with WIFI and a printer with WIFI. 2 mobile phones and that's it. All meant to share my home network. The dvd player will not acquire the web well that directly connect to the modem. I did not any changes for several months.

  RA

  What is wifi has an IP address.  This situation occurs generally if the INVESTIGATION period have the value static or more likely in your case that the whole of the network (including the router) need to be restarted.  Usually if you restart all devices at the same time it will erase it