ContactService returns the empty list of contacts

Similar Questions

• BlackBerry Z30 during the transmission of the complete list of contacts emails does not appear

  Have just updated to release 10.3.2.2474

  When you try to send an email to one of my contacts this new version shows only a limited number of contacts.

  When we look in the contact application, all contacts are present and have not been filtered.  When sending an e-mail, a limited number of contacts are displayed.   Within the email application it is not possible to access the complete list contacts are displayed in the contacts application.

  This was never a problem until I updated.

  Any suggestions gratefully received.

  First of all, thanks a lot for taking the time and trouble to help out me.  It's really appreciated.

  After reflecting on your comments, I realized that I had not specified the problem.  It occurred to me that contacts being shown are only those for which I had an associated email.   He was actually from that where the "recent management of contacts" feature had stopped working.

  After some nosing around on the forum, it seems that there is a solution to this.  Using the power on top of the phone perform a reboot twice.  Then do a reset ONCE (i.e. press the two volume buttons down until it restarts).  Although it did not work the first time for me, I tried it again this morning, and he returned the feature.

  So problem solved.

  Nevertheless, many thanks for your useful suggestion because he made me push in this direction.

• Transfer (import/export) the entire list of Contacts, to another Mac Air - is - it an easy way to do this?

  I would send my wife my entire contact list, whole (with separate groups listed and all) and have it roll in his application of Contact, everything as it appears in mine - is there a way between two MacBook Airs the two 10.10.5, both with the application Contacts 9.0 (1579), export or import all contacts and several distinct groups within contacts, and easily make?

  There are two ways. If both of you want to have the exact same contact list you can create an iCloud account (if you have not already one) and configure iCloud in system preferences to put your contacts into the cloud. Then have your wife open Contacts, select Contacts > accounts menu. You can enter your account name and password and your contacts list will become his contact list. Changes/additions or the other of you is synchronized to the other computer.

  If you just want to give your list of current contacts but change not maintain hers than yours, you can export your list of contacts in the form of a archive of contacts. Send it to her, and then she can import it. I'm not entirely certain that it will be kept for groups, but I think that it doesn't. (My wife and I use the first option)

• Is it possible to share the same list of contacts with someone

  My wife and I want to share the same contact list. Is this possible?

  Try to go to Contacts > file > export > export vcard.

• chassis app returns an empty list

  When I ran the chassisRackVSphere plug-ins, it worked fine. After a few attempts (to reboot the server, virgo, etc), the list of the chassis is always empty. I commented the invalidQuerySpec exception as suggested in another thread. I checked the java service code that the chassisCount has the value 4 and she performs an iteration through a loop to create objects of chassis.

  I added debugging (level @info) logs in ChassisRAckVSphereDataAdapter.java to trace calls. Where are the papers? I have not found in the directory feature of serenity-customer.

  Thanks in advance!

  The vsphere_client_virgo.log server log is/server/serviceability/logs on a development configuration.

  The location is different if you deployed a VCVA vm or used the Windows Installer:

  • / var/log/vmware/vsphere-client/logs/for VCVA.
  • C:\ProgramData\vmware\vSphere Web Client\serviceability\logs on Windows 7
  • or C:\Program Files\VMware\vSphere Web Client\server\serviceability\logs on Windows NT
  • Alternatively, if you do not vsphere_client_virgo.log, open the configuration file [VWC]/server/configuration/serviceability.xml and search for the attribute file appender LOG_FILE.]

• Simple? How do you want 'INSERT' function to return the empty space after a field?

  All,
  
  I just have a PET of brain? I have a situation where I have a field that must return a single space, with a value that has a space before and after it.
  
  Example:
  
  In the text == > I'm < field > go to the office. <-notice no space between the two am, < field > and will
  
  I mean if set to FALSE, then "I am * not * going to the office."
  If true, then "I go to the office."
  
  If it is true, I am just RETURN(""); <-this returns a blank space
  
  
  If FALSE, I tried:
  
  RET = 'no '.
  RETURN ("" & ret & "");
  
  This property returns "I am notgoing to UNRWA. <-don't notice any empty space after the 'no '?
  
  I tried
  
  RET = 'no ';
  RET2 = ("" & ret);
  RETURN (Insert (ret2, 3, ""));
  
  Always the same result. What is strange, that is, if I do a RETURN (Insert (ret2, * 2 *, "")); then he comes back "I'm not tgoing to office" <-note the space between the "o" and the "t"?
  
  Ideas?

  I forgot about it. Depending on which version you use, DAL actually supported a function that will make the hard space for you, like this:

  Val = FLOAT (160) & 'not' & CHAR (160)
  Return (Val)

• APEX listener returns the empty login page

  APEX 4.2.2

  APEX 2.0.2 listener

  GlassFish 3.1.2.2

  The platform is 32-bit, Linux, Amazon EC2

  I am reasonably sure I have properly deployed the apex.war and i.war to Glassfish and set a virtual path and database connection correctly.

  When you run Firefox on the EC2 machine, access to the

  http://localhost: 8080/apex/dad1.

  does not return a login page, no problem. But navigation externally visible publicly address (I have to hide the real address, I'll use a.b.c.d) of the hosting machine or across the net returns a blank page:

  http://a.b.c.d:8080/apex/dad1.

  The success of this operation:

  http://a.b.c.d:8080

  I get the standard Glassfish page so I know Glassfish is listening on that address.

  I also tried from the stand-alone earphone, and I get the same effect: it refers to a login screen when browsing the localhost, but go to the external address, I get a blank page.

  The pages are really blank, there is no indication in the source of the page and it's all Firebug returns:

  <html>

  <> Chief

  "" <link title= "wrap long lines" " href="resource://gre-resources/plaintext.css" type="text/css"" rel= "alternative style"> "

  < /head>

  <> body

  <>of thepre< /pre>

  < /body>

  < /html>

  
  

  I tried to enable the query server side, but I have yet to find the way to produce the equivalent of an access.log. Searching the forum produced a few references to "routing rules" but I couldn't find what and where he could be.

  As the listener works perfectly when you go to localhost, I can't believe that rthis is the common problem of not finding the vivid, or url mapping problem. But I am of course open to suggestions!

  Any idea will be welcome.

  Thank you for your time.

  Fixed. Finally tracked it, a redirection problem fixed with the patch 16760897.

  Thank you to everyone who watched this, I'm sorry to have lost your time, hope to post the solution will help someone else.

• return the empty record only when no results not returned by the main query

  It is a question of SQL (not PL/SQL)...
  
  Let's say I have the following text:
  
  Full_name SELECT NULL, NULL, NULL last_update_date address
  OF the double
  UNION ALL
  SELECT full_name, address, last_update_date
  Employees
  WHEN TRUNC (sysdate) = TRUNC (last_update_date)
  
  If the second part of the query retrieves no rows, it works beautifully and I get a blank line; However, if the second part of the query returns records, I get a blank line over my dataset I want.
  
  How can I create a SQL statement that executes only the first query (before the union all) when no result is returned from the second. Also, I don't want to exceute the query twice only if I can get a count of the records because my actual query is much more complex than the example I've provided here.
  
  Thanks in advance!
  Emily

  Hello

  You can try to use a subquery factoring (WITH clause)
  The query is executed only once, the query results are cached in memory or in a temporary table.
  and you can view these results several times in the main query:

  WITH second_query AS (
    -- your second query here
    SELECT full_name, address, last_update_date
    FROM employees
    WHERE TRUNC(sysdate)=TRUNC(last_update_date)
  )
  SELECT full_name, address, last_update_date
  FROM second_query
  UNION ALL
  SELECT NULL full_name, NULL address, NULL last_update_date
  FROM dual
  WHERE NOT EXISTS ( SELECT 1 FROM second_query)
  

  Published by: kordirko on 2010-07-08 02:02

• Back on an empty list causes / converts the paragraph to become not an event from the list

  Hello

  I noticed that if I press the return key, while I'm on the last item in a list which is be empty, this last element of the empty list to become a regular paragraph (is no longer part of the list), rather than leave this element of list under vacuum and adding another new item in list empty. It's a little surprising, because I expected to do another element of the empty list if I hit the return key.

  So, is this intentional / designed? If so, how is a user made a lot of empty list items? Also, how I detect the event to go to an empty list in a regular paragraph item? We implement different styles for items in list versus non-listes, so when a paragraph converted a paragraph of the list in a paragraph of not on the list, we will need to make a few updates.

  Tank you for the info.

  Will be

  You are right. It is a synchronous process. Only after the end of the COMPOSITION_COMPLETE event handler, the composition process may end. And a single composition is done at the same time.

  So I think that FlowOperationEvent.FLOW_OPERATION_COMPLETE can help you in such a scenario. FLOW_OPERATION_COMPLETE cannot cover all the changes of structure and the formats of textflow, but it can be triggered when you press on the key. I think it can meet your requirement.

• I get all the programs listed under my program menu on the start menu, but they all show empty and all my programs are in c/programs as it should.

  My computer was infested with viruses, Trojans and so had all digitized and clean, but all my programs listed in the start menu there are the EMPTY list.

  I have downloaded and run the Microsoft Fixer ( http://support.microsoft.com/kb/886549 ) and everything is the same.

  Any help will be much appreciated.

  Thank you!

  Jorge.

  Hi DandyBaron,

  ·         You are not able to access these programs at all, or simply not start menu?

  Follow these methods in the order and see if the problem is resolved.

  Method 1: Follow the steps and check out them.

  a. open an Admin command prompt window. To open an administrator (high) prompt, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator.

  b. in the command prompt window, type the following command and press ENTER:

  regsvr32 msxml3.dll

  c. closing session and you connect again to your user account and see if the menu items are displaying correctly.

  Method 2:

  Step 1:

  I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Step 2: try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps.

• How to access the list of contacts in BlackBerry

  I want to make a native application that needs to access the contacts list.how I can do

  contactList = () .openPIMList () PIM.getInstance (BlackBerryContactList)
  PIM. CONTACT_LIST, PIM. READ_WRITE);

  Above code will give you the entire list of contacts.

• BlackBerry Smartphones DELEATING ALL CONTACTS ON THE PHONE LIST

  Is it possible to remove the entire list of contacts in my address on my bb8110 box?

  Use BlackBerry Desktop Manager. Open backup and restore and select the advanced option. Select the address book database, then select Delete.  There is no recovery if you delete the wrong database. You can create a first backup just to be sure.

• Smartphone blackBerry, merging the lists of contacts

  I have two BlackBerry; a tour and an 8700.  I want to merge the two lists of contacts (both are personal and not professional), while I have a common list of contacts on each Blackberry.  I can't find the solution (or I did not recognize if I saw him).  Please can someone tell me if this is possible and if so, how to proceed.

  Thank you

  Jerry

  Use Desktop Manager to synchronize a BB with your computer, then sync the other BB with computer, choose to merge the lists of contacts. You leave on your list. Then write the list of contacts of each BB DM when you synchronize each again, and then the two BB will have all your contacts.

• How to recover the table list all empty in a schema

  How we get all the empty list of table in a schema. That is, the tables were that no line is present

  Check this query

  select table_name from user_tables where num_rows=0
  /
  

• Exactly where on the computer are my 'Contacts' stored for Windows Live Mail?

  I use Carbonite backup. Unfortunately, when I tried to restore my contact list, I could not find such a file, the list of backup Carbonite or in Windows Explorer. I know where the e-mails are kept, but there is no sign of a Contacts folder (except a bunch of those empty.) I have a lot of existing contacts, but I was hoping to find an earlier version on Carbonite.

  All I really want is access to an email address who have somehow got wiped out.

  Log on to Windows as a user with administrator permissions and launch Windows Live Mail. Don't bother to sign or adding accounts unless you have to. This will establish a database of empty contacts for that user.

  In Solution Explorer, change the \Default\15.5\DBStore folder in the new user profile by one that contains the address that you need. Start Windows Live Mail and check if the old list of contacts has loaded. If so, drag the contacts you need out on the desktop to create a vCard (.vcf) files containing all their data. Copy these files to a folder (for example, the desktop) for the former user in need.

  Log off Windows and log in as the former user. Start Windows Live Mail, then find a .vcf file, right-click on it and select Open with > Windows Live Mail. In order to integrate the contact to your contact list, click Add contact .

  Please let us know if it worked and did what you want.

  For later use, Windows Live Mail includes a free online backup, regular automatic for contacts; all you have to do is to connect with a Microsoft Account. The contact list will be saved regularly and be available from any computer with an Internet connection. This will avoid having to jump through hoops was anything on your computer.