Continuous loop - playback

Similar Questions

• Try to connect to my yahoo on Safari takes me in a continuous loop to the login page. It works very well with Firefix.

  Try to connect to my Yahoo on Safari brings back me in a continuous loop to the login page. My registration using Firefox works fine.

  IM using ios10 on an iPhone 6 s

• VI, stuck in a continuous loop

  Hi guys,.

  I am at my end on this and need your help.

  I have a Chatillon I can communicate successfully with the gauge. I checked that my settings for Baud, data Bits, Stop Bits, partially and flow control are correct. I also checked that I can connect with Hyperterminal.

  I'm changing the type of the gauge mode is on, but my bytes to the Serial Port node always declares zero, so my EXE is always in a continuous loop. When I change the settings in the VI and manaully, I can communicate successfully with it.

  I have attached the VI and the manual.

  BadAzzS10 wrote:

  How can I request the wait? It's basically just the VI wait or is there special VISA function that does this?

  You use the VI just wait.  But you need to put it in a frame flat sequence so that you ensure that the waiting occurs before you try to watch the bytes to the port.

  

• Continuous loop of 'Sign' and ' click on continue enjoy software '?

  Very frustrating! ... I tried the upgrade to 'El Capitan'. I tried to uninstall and install progs. I have downloaded I require not the same programs.

  All I get after all is 'Sign up' and ' click on continue enjoy software "on a continuous loop.

  Tell me please someone has had the same problem and managed to sort it out. Ive lost almost my whole day on it.

  Thanks in advance

  Hello

  Please follow Re: loop "Sign in required"

  Kind regards

  Sheena

• How I continuously loop frames with pause for 20 seconds in each image of the scene even without going to the next scene?

  How I continuously loop frames with pause for 20 seconds in each image of the scene even without going to the next scene? There are buttons for other scenes in these images. The below works well until I got to the last frame of the scene, then he goes to the next scene and plays. How can I make one loop continuously.

  Stop();

  var: timer = new Timer (20000,0); / / <--

  timer.addEventListener (TimerEvent.TIMER, timerHandler);

  Timer.Start ();

  function timerHandler(event:TimerEvent):void {}

  this.nextFrame ();

  or if you want to jump for example 5 executives

  this.gotoAndStop(this.currentFrame+5);

  }

  Thanks for any help.

  If you want to stop your timer, use the stop() method:

  Timer.Stop ();

  PS when you use the adobe forums, please check the useful/correct, if there is.

• the continuous LOOP until recording recovered

  In my stored procedure, I have a loop where to look for the file arrives on a directory. So what I need is THAT LOOP must continually search for the file and once sound generated then come out and return the results. Also, I want to have 5 minute delay, if the file creates no less than 5 minutes, then he should give the message and LOOP should end. How can I do? I tried with the next LOOP, but it did not work.
  
  I am using oracle 11g R2 - Enterprise Edition 11.2.0.1.
  
  LOOP
  Select * in table search_unique_Sequence (sys.get_dir_list('D:\temp\'|| uniqueSequence |) (("* .xml '));
  If search_unique_Sequence NULL <>
  Then
  dbms_output.put_line (uniqueSequence);
  EXIT;
  END IF;
  
  When I ran the SQL from the command prompt, it runs and returns the folder.
  SELECT * from table(sys.get_dir_list('D:\temp\441*.xml');
  
  But I need above LOOP
  1. to constantly search for file, for example 550_todaysdate.xml, and one time that the file is generated, found in a LOOP can break out of the LOOP and provide the file name
  2. in addition, if the LOOP could not find the file within 5 minutes, then end the LOOP
  
  Gurus: Your help is appreciated.
  Thank you

  I'd probably also put an event trigger in the process that moves the file, or a have an OS level file listener, but if you were determined to do in PLSQL, he structurally could look something like this.

     exit_loop                BOOLEAN DEFAULT FALSE;
     process_iterations       NUMBER DEFAULT 0;
  BEGIN
     WHILE exit_loop = FALSE
     LOOP
        process_iterations := process_iterations + 1;
  
        BEGIN
            SELECT * INTO search_unique_Sequence FROM TABLE (sys.get_dir_list ('D:\temp\' || uniqueSequence || '*.xml'));
  
            exit_loop := TRUE;
  
           --
  
        EXCEPTION
           WHEN NO_DATA_FOUND
           THEN
              DBMS_LOCK.sleep (30);
        END;
  
        IF process_iterations >= 10 and exit_loop = FALSE
        THEN
           exit_loop := TRUE;
           DBMS_OUTPUT.put_line ('The file never arrived.');
        END IF;
     END LOOP;
  END;
  /
  

• NO_DATA_FOUND-continue loop

  DECLARE
  data_found EXCEPTION;
  CURSOR tab_list_cur IS
  select table_name from dba_tables@DB_LINK 
   where owner='EMC' and table_name like 'T%' order by table_name;
  tab_list tab_list_cur%ROWTYPE;
  col_name VARCHAR2(30);
  data_type VARCHAR2(106);
  null_allow VARCHAR2(1);
  BEGIN
  FOR tab_list IN tab_list_cur LOOP
  select COLUMN_NAME, DATA_TYPE, NULLABLE into col_name, data_type, null_allow from dba_tab_columns 
  where owner='EMC' and TABLE_NAME=tab_list.table_name
  minus
  select COLUMN_NAME, DATA_TYPE, NULLABLE from dba_tab_columns@DB_LINK
  where owner='EMC' and TABLE_NAME=tab_list.table_name;     
  raise data_found;
  exception
      when no_data_found then null;
       when data_found then 
       dbms_output.put_line('Tab Name: '||tab_list.table_name||'  Column_Name: '||col_name||'  Nullable: '||null_allow);   
  end;
  END LOOP;
  END;
  /

  I'm trying to continue the loop evethough if there is no result to select... in... Statement
  but his does not work, can anyone help with this? I looked into other bids but little still a mistake
  
  Published by: rcc50886 on July 3, 2012 09:30

  His work, but now I see the following error:
  ORA-01422: exact fetch returns more than number of lines

  Ago said. :)

  Try this method instead, to avoid the error:

  BEGIN
    FOR c in (
        select TABLE_NAME, COLUMN_NAME, DATA_TYPE, NULLABLE
          from dba_tab_columns
         where owner = 'EMC'
           and TABLE_NAME in (select table_name
                              from dba_tables@DB_LINK
                              where owner = 'EMC'
                              and table_name like 'T%')
        minus
        select TABLE_NAME, COLUMN_NAME, DATA_TYPE, NULLABLE
          from dba_tab_columns@DB_LINK
         where owner = 'EMC'
           and table_name like 'T%'
        order by table_name) loop
          dbms_output.put_line('Tab Name: ' || c.table_name || '  Column_Name: ' || c.column_name || '  Nullable: ' || c.nullable);
        end loop;
  END;
  

• I have problems of continuous loop trying to start after installing SP3

  I tried to boot into safe mode and other options, but it does not start and it won't start either my drive (says there is a damaged my disk file).

  Any ideas on how to get started so that I can remove SP3?

  PS - very disappointing that there is a lack of support from Microsoft on this subject - unless you pay £46 - it was caused by their update and I think they should fix it for free!

  Hello

  Please follow the steps below: good luck

  Thank you

  Thomas

  http://support.Microsoft.com/kb/950249

  Method 4: Use the Recovery Console

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  If you cannot remove Windows XP SP3 by using one of the previous methods, follow these steps:

  1. Insert the Windows XP CD in the CD drive or in the DVD drive and restart your computer. When you receive the following message appears, press a key to start your computer from the Windows XP CD:
     Press any key to boot from CD

     Note The computer must be configured to boot from the CD or the DVD player drive. For more information on how to configure your computer to start from the CD or the DVD player drive, refer to the documentation that came with your computer or contact the computer manufacturer. Alternatively, you can use a Windows XP boot disk. For more information, see the following article in the Microsoft Knowledge Base:

  305595 (http://support.microsoft.com/kb/305595/) how to create a boot disk for an NTFS or FAT partition in Windows XP
• When you receive the Welcome to Setup message, press R to start the Recovery Console.

  Note Several options will be displayed on the screen.

• Select the correct installation of Windows XP.

  Note You must select a number before you press ENTER, or the computer will restart. Generally speaking, only the 1: C:\Windows is available.

• If you are prompted to type a password to admin, do. If you do not know the administrator password, press ENTER. (As a general rule, the password is empty.)

  Note Do not continue if you do not have the administrator password.

• At the command prompt, type cd $ntservicepackuninstall$ \spuninst, and then press ENTER.
• At the command prompt, type batch spuninst.txt, and then press ENTER.

  Note The Spuninstal.txt file appears. As the file scrolls down, you will see errors and files that are copied. It is a normal behavior.

• After Windows XP SP3 is removed, type exit and press ENTER.
• Restart the computer in safe mode. To do this, press F8 when the computer restarts.

  Note After you restart the computer, the computer may stop responding, and you will see a black screen. The mouse works. In this case, restart the computer by turning off the computer, and then turn it back on. The second reboot allows you to open a session.

• When the computer restarts, Windows Explorer (Explorer.exe) does not run and the icons of Windows and the Start button are unavailable. To resolve this issue, follow these steps:
  1. Press CTRL + ALT + DELETE and then click Task Manager in the Windows security screen.
  2. Click file, and then click new task (run).
  3. In the Open box, type regedit, and then click OK.
  4. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RpcSs
  5. In the Details pane, right-click ObjectName, click modify, type LocalSystem in the data value box and then click OK.
  6. Restart the computer
• Use one of the previous methods to remove Windows XP SP3 from your computer.

For more information about how to install and use the Recovery Console, click the number below to view the article in the Microsoft Knowledge Base:

307654 (http://support.microsoft.com/kb/307654/) how to install and use the Recovery Console in Windows XP

If you need assistance on how to install, reinstall, or uninstall Windows, visit the Microsoft Web site at the following address:

http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall (http://windows.microsoft.com/en-us/windows/help/install-reinstall-uninstall)

• Continuous loop stage 3 of 4

  My computer is permanently stuck in step 3 of 3 loop of update, I have tried pressing F8 and safe mode, repair your computer, and start windows normally, but keep going back to the loop. Hard drive through an occasional clicking sound what she usually never does. Any help gratefully received, but please keep things simple!

  Thank you

  Hello

  Rattling are a bad sign in a hard disk and normally indicate that they fail.

  Go to the website of the manufacturer of your computer/laptop > find specifications of hardware of your computer/notebook (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic on the computer software lets you get here > make a Bootable disc > test your hard drive.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the hard drive is OK, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Problem during loop playback of MP3

  Hello

  I'm trying to play an mp3 file in a loop on Blackberry pearl 8100, here's the code:

  Try
  {
             
  Player=javax.microedition.media.Manager.createPlayer(getClass().getResourceAsStream("/sound.MP3"),"audio/MPEG");
             
  Player.Realize ();
  Player.prefetch ();
  player.setLoopCount(-1);
  Player.Start ();
  }
  catch (System.Exception e)
  {
  System.out.println ("error in the establishment of the media:" + e);
             
  }

  The problem is the sound simple and after that I get under the exception:

  MEDIA_NATIVES: unload0() mediaHandle = 0
  MN: unload 1
  MEDIA_NATIVES: init0() mediaHandle = 0 State = 0
  MN: charge 0
  MEDIA_NATIVES: seekComplete0() mediaHandle = 0
  MEDIA_NATIVES: unload0() mediaHandle = 0
  MN: unload 1
  Streaming is reason = 1 prev - state = 300
  AUDIOMANAGER: IOException
  Streaming is reason = 1000 prev - state = 300

  This exception is automatically without coming and println statement...

  Is there anything that I'm missing, please give me the solution...

  Kind regards

  LOULOU

  If you have everything installed recent versions, give a try.

• LOOP PLAYBACK

  Is there a play loop, or anyway a button loop segment (image) when editing in the timeline in first elements?

  N °

• Import of Business Catalyst site is stuck in a continuous loop of sign-in?

  Hi all

  I'm trying to import my Business Catalyst site in Dreamweaver. I select "import business catalyst site" on the tab "manage sites".

  Suite of Dreamweaver that invites its "connecting to Server" and then opens the window Adobe ID asking me to connect. Now, it's where I have questions.

  I get my email and password, it takes a few seconds to process to verify the password and email, closed the window and then re-opens it invites me to retype the password and email.

  It's the endless loop in that I'm stuck.

  Now I know this isn't a fake email or password issue as Adobe 'ticks' the email if its correct when she entered. In addition to this, I put in the wrong password once and he instantly said "password incorrect... ».

  Anyone know how I can fix this problem? Or least even download my business catalyst site without using Dreamweaver?

  I use Adobe Dreamweaver CS6.

  Best regards, Luc

  ;

  BC has undergone a lot of recent changes. Please consult the manual of the BC.

  Connect to your site using Dreamweaver

• background but uncontrolled looped video box continues looping

  nice feature, but can not stop the video loop

  Hello ImagineJames,

  You use any specific widget for this background video?

  Please create a new site and check if the same thing happens with the widget?

  If it is then this means that there is something on the site that is in conflict with the codes or the widget is corrupt removing and replacing it in the page can solve the problem.

  If this happens on the new site so I suggest you to contact support for widget developers.

  Kind regards

  Vivek

• Is it possible to loop playback in Premiere Pro 2014?

  That's all.

  Thank you!

  Click the key at the bottom right of the window the program monitor, select LOOP in the drop-down list

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Problem with a continuous loop

  This file was supposedly changed from As2 As3. It seems as if she used to stop when I got it. But the links do not work. When I followed the troubleshooting protocols, he began an uninterrupted loop.

  Help, please. I can't attach the flv file and action script files. What I get from the window output is "fonts must be included for any text that can be changed during execution, other than text with the parameter"Use Device Fonts". Use the text > order embedding fonts to embed fonts. »

  Help, please. I paid a coder for the as2 to as3 file, and that's what he gave me...

  contact this encoder and let them know the problem.  If it's a problem with their code, they should repair free of charge.