Continuous playback stop

Similar Questions

• DVD playback stops on Satellite A100

  I have an A100 - model No. PSAAKKC - VA104C - which is loaded with Vista Home Basic and included Intervideo WinDVD for Toshiba B06.108 v8.0.

  When I play DVD they begin OK but after about a minute or two, playback stops and then starts, stops repeatedly. Program information page shows 1 GB of memory even though I've updated to 2 GB.

  Anyone got any ideas?

  Do you have this problem only with WinDVD or other applications like VLC or Media Player too?

  I think you should do an update of WinDVD. I searched on the site of Toshiba Canada but I didn t find updates for WinDVD.
  Search the site European Internet and the search for the Satellite A100. There is an update available and it should also work with your model.
  http://EU.computers.Toshiba-Europe.com

• Windows vista family premium sp2 print spooler continues to stop

  I can't keep feeling close spooler tried Mr. fix and still nothing.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that print spooler continues to stop in Windows Vista.

  Please follow the steps.

  (a) click Start, type "Services.msc" (without the quotes) in the search box and press ENTER.

  (b) double click on "Printer Spooler" in the Services list.

  (c) click on stop, and then click OK.

  (d) click Start, type "% WINDIR%\system32\spool\printers" in the search box and press ENTER, remove all files in this folder.

  (e) click Start, type "Services.msc" (without the quotes) in the search box and press ENTER.

  (f) double click on "Printer Spooler" in the Services list.

  (g) click Start. In the Startup Type list, make sure that "Auto" is selected, and then click Ok

• Under Security Essentials program and continues to stop at c:\winndows\system32\codeintegrity\driver.stl

  Original title: c:\winndows\system32\codeintegrity\driver.stl

  I've been running the Security Essentials program and continues to stop after the digitization of 80267 files to c:\winndows\system32\codeintegrity\driver.stl.

  Should I uninstall this driver?  Should I rename in a .dll file?
  Should I continue to allow the Security Essentials continue as is?
    
  I still have an IYogi dock listed on my main drive.  Most of the scanners don't analyze this player.  I have removed/uninstalled most of the IYogi.  They had files in different areas of my computer.
  Should I wipe my hard drive and reinstall all files originating from the Installation disc.  If so, Microsoft Security Essentials will install all security for Vista patches?
  My user accounts been hacked even in Safe Mode, it is erratic.  UAC gives me a variety of messages when I try to change passwords Administater.

  Hello

  It seems that the computer is infected with the virus.

  I suggest you to uninstall the drivers and check if the same problem persists.

  See also: http://windows.microsoft.com/en-US/windows-vista/how-do-I-remove-a-computer-virus

  Note: once a virus is removed, you will need to reinstall some software, or restore lost information.

• Continuous playback of a DVD on a loop.

  I have a DVD (not a commercial), I want to play on a continuous loop. I searched the Windows Media Center (which fortunately plays my DVD), but could not find a "continuous playback" or "repeat" option. Am I missing something? If WMC can do it, anyone know of a freeware that can?

  I have a DVD (not a commercial), I want to play on a continuous loop. I searched the Windows Media Center (which fortunately plays my DVD), but could not find a "continuous playback" or "repeat" option. Am I missing something? If WMC can do it, anyone know of a freeware that can?

  ================================================
  The free VLC Media Player can do it if you set the start and the end points.

  VLC Media Player
  http://www.videolan.org/

  Open your DVD in VLC Media Player and go... View / advanced controls...

  Bottom left of the main window, you will see 4 buttons in a row and if you
  Place your pointer over the 3rd button it says: "the loop from the point A to point B".
  continuous.

  On the left, click on this button at the beginning and the end of the video track and it will make a loop.
  (drag the slider to the left and click on... and then drag the slider to the right and click)

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Spooler continues to stop

  System: Windows Vista 64

  Printer: HP Laserjet 1020

  Problem: Spooler subsystem app continues to stop

  I tried to install the new drivers, restart and the steps listed on this site: http://hpanswers.blogspot.com/2008/04/spooler-subsystem-app-stopped-working.html several times. Still no luck.

  If I try to do anything related to printers it stops. Then it restarts and stops again a little later. For example: one of the suggestions I've read was to printers in the control panel and try to print directly to the printer instead of by the spooler. If the spooler is running, then the second I click on 'printers', it stops. So, I can't go to the properties of the printer and change it to 'print directly... '. »

  Help, please!

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The data execution program continues to stop working Internet Explorer

  Data execution program continues to stop working Internet Explorer

  Hello

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
  unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
  run as a scanner.

  http://www.Malwarebytes.org/

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
  Online - APPLY - OK attacks close and restart IE

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• My system hardware and audio changes playback stops suddenly. What can I do?

  My system hardware and audio changes playback stops suddenly.

  I ' v tried checking device in the Device Manager, it appears as properly installed and a sound test is attempted it says that it is used by another device.

  When the problem arises, I go to the Device Manager and do a right click on the device, then I click where it says 'Search the hardware changes' and then it starts working again, but for 5-10 minutes. Tops.

  Please help me...

  Hello

  1. What is the brand and model of the PC?

  2. are you aware of any hardware or software of the PC prior to this problem?

  3. is there another audio device connected to the system?

  This happens usually if the audio output settings are incorrect or if another audio device is attached to the system such as a complement for the audio card.

  Kindly, follow these methods and check if that helps.

  Method 1:
  Similar issues were corrected by restarting the Windows Audio service.

  Follow these steps:

  a. press the Windows key + R, type run and press Enter.

  b. type services.msc and press ENTER.

  c. scroll to find Windows Audio and Windows Audio Endpoint Builder services.

  d. do a right click and Properties, stop and start the services.

  e. click on apply and OK.

  Check the result.

  Method 2:
  You can turn on the speakerphone as default output device and check the result.
  Follow these steps:

  a. press the Windows key + X, choose CControl Panel.
  b. click on the its, a new window will open.
  (c) in the new window, click the read tab.
  d. right-click on the speakers and select set as default.

  f. click apply and OK.
  Check if it helps.

  Let us know the result. If you have any other questions, we will be happy to help you.

• CC bridge continues to stop, says "the operation could not be completed.

  CC bridge continues to stop, says "the operation could not be completed", when I try to select some images.  I click a different folder and locking the bridge

  Hi deankirkland,

  Please reset the Bridge preferences and then try it.

  Measures

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  ~ Mohit

• Playback stops with the mouse outside EP

  I want to playback of a clip in the PE-8. Well, this isn't the problem. I have to just press the play button.

  The problem is this: as soon as I click my mouse outside PE or my keyboard playback stops. It's really annoying because I like to write comments in a document while I'm looking at my own pace.

  Any suggestions?

  The two Adobe video editing programs will be reading, when they have developed. There are feature requests to change this behavior, but so far, Adobe did not change.

  Good luck

  Hunt

• AppleScript continues to stop for the interaction of the user

  I use this great applescript to transform my indesign layers in photoshop layers:

  http://www.zenodesign.com/scripts/PagestoPSLayers.zip

  He asks a folder put a temporary pdf file, then asks some preferences (indesing pdf export preset, color mode, pagenumber, resolution and anti-aliasing on or off). Then the script should work fine until what indesign all layers are beautifully transformed into pixelated photoshop layers.

  This used to work perfectly until today, I had to use the script again. For some reason any the script continues to stop for interaction with the user.

  Photoshop gives me the dialog box 'Open', then 'Import PDF' dialog box (don't use only not settings than the requested script), 'Open' and 'Import PDF' same dialog boxes for the next layer, then a dialog box to name a duplicate layer, the dialog box 'Close Document', 'Préférences' dialog box, "Canvas size" dialog box... you get the point.

  All the stuff the script should be done automatically.

  I'm not in myself, but it used to run fine without present me all these script dialogs. Any help is appreciated!

  Try to put this first statement

  Tell application "Adobe Photoshop"

  set the display of dialog boxes for ever

  tell the end

  and then even add at the end but say

  set the display of the dialog boxes for always

• Playback stops

  We use Connect Pro 7.0.1 and Presenter 7 with Powerpoint 2007. The problem is that reading each and one output continues to stop.
  
  Initially I thought it was a problem with streaming, then tried to publish on the desktop that has not helped. I also changed the settings such that it "will download completely blades before reading. Also, did not work-
  
  Overall, the zip size is 8 M, the sound quality is FM, image quality is average.
  
  Any thoughts?
  

  Can answer my own question here - it's because it was custom in 2007 animations based on clicks. If you have this same problem, it is fixed with presenter 7.0.2 released, quite conveniently, today (2008-11-03).

  Movin ' it.

• iOS 10 video playback stops working until you restart

  I have an iPad Mini retina, and since the upgrade to iOS 10.0.01, a short period of use causes videos to stop working.

  Videos in Safari, Chrome, YouTube etc. appear in the cache (saturated with progress on the top bar), but no response to play. The first image of a video appears, but only in the form of static image. I am able to change the static image displayed by rubbing them at any point in the video, but playback will not occur.

  The only thing that allows video playback is again restart the device (apps force closing, locking and unlocking etc. doesn't help).

  Hello, Sunkai!

  Thank you for using communities Support from Apple. I understand from your post that you're having trouble playing videos on your iPad mini; the video will start but will be stuck as a single image, as if the buffering and never take back (at least until you restart). I mainly use my iPad for watching videos, so I know it's important that they play in fact; I'm happy to help you!

  I have some troubleshooting I can offer to you. Before you begin, create a backup of your iPad using iCloud or iTunes, following the instructions here: How to back up your iPad, iPhone or iPod touch

  Once you have your backup, try the following steps, in order. A video test after each step and will stop when the problem is resolved.

  1. Make sure your iOS software is up-to-date. In the last week, iOS 10.0.2 came out. Use the following article to get help update: update the iOS on iPhone, iPad, or iPod touch software
  2. If this happens on a Wi - Fi connection, try restarting the network you are using from the router or the modem (if possible). If it is a private (for example, your home network) WiFi network, try to remove all the devices on the network, then by simply adding your iPad in return.
  3. Try a different network.
  4. Reset the network settings on your iPad under settings > general > reset > reset network settings. This will affect all personal data (like your photos, contacts, calendar of events, etc.) but it will remove saved passwords, and Wi - Fi networks one previously used settings APN or VPN and all paired Bluetooth device.
  5. Restore your iPad settings, following the steps described here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure the iPad as a new device (i.e. without using the backup that you created earlier, at least temporarily). You can sign in iCloud, iTunes and App Store, iMessage and FaceTime with your Apple ID test then a video.

     If the problem is resolved, you can restore your backup by the information here: restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• Video playback stopped working in Firefox until I DISABLED the plugin of primetime content decryption module

  From one day to the next video (youtube, Vimeo, etc) stopped not working in Firefox. I checked my plugins/addons and discovered the plugin Adobe "primetime content decryption module" which I had not noticed previously had been installed. I've disabled the plugin and found that the video playback was still functional.

  I realize the Primetime plugin is intended to facilitate playback of certain content (DRM), which would not otherwise play with Silverlight/Flash plugins, but unless that I turn it off it's actually prevents me from normal video content playback.

  As this is a Firefox/Adobe plugin suggested I prefer it to work as expected rather than disable/remove it.

  colmacc said

  From one day to the next video (youtube, Vimeo, etc) stopped not working in Firefox. I checked my plugins/addons and discovered the plugin Adobe "primetime content decryption module" which I had not noticed previously had been installed. I've disabled the plugin and found that the video playback was still functional.

  I realize the Primetime plugin is intended to facilitate playback of certain content (DRM), which would not otherwise play with Silverlight/Flash plugins, but unless that I turn it off it's actually prevents me from normal video content playback.

  As this is a Firefox/Adobe plugin suggested I prefer it to work as expected rather than disable/remove it.

  A quick update to my problem noted above (maybe I should try this first)

  I ACTIVATED the plugin once more see if it would cause video playback yet, but everything seems to be ok now (IE, Primetime plugin is activated and all videos play normally)

  Will report if the problem arises again

• Satellite A200 - continuous unexpected stops

  Hi members,

  All help is appreciated in simple explanation please.

  My laptop is still connected to a power source, so I never use battery.

  Last week, each morning after having been inactive during the night; When I touch the mouse it shutsdown unexpectedly then starts again with the message "a stop of enexpected was detected. During the restart process a notification that "one or more drives should be checked for consistency. Also... the system seeing drive flashes continuously.

  Yesterday morning, I got another message after stop saying "your computer was unable to start. Startup Repair is checking your system for problems. Then another window saying "Startup Repair can try to restore your computer to an earlier point in time when it worked correctly. The repair won't change personal data, but it can remove some programs that have been installed recently. You can't undo this restoration. I clicked on "restore" to continue with the repair, thinking that everything would be good this morning.

  A judgment that happened this morning.

  I have a lot of disk space, so your contribution is appreciated.

  See you soon,.
  Jane

  Hey Buddy,

  As the error message already said, it could be a HARD drive malfunction. Maybe he has a bad sector or something else

  But it is difficult to say so in the first place I recommend to reinstall Windows using the Toshiba recovery disc. The disc can restore factory in a few minutes, and if it was a software problem or pilot, the recovery disc can solve the problem.

  But first backup your data. Toshiba Recovery disk will wipe the entire HARD disk.