Control overview

Similar Questions

• Overview in AFX - shortcuts for the missing Preview on my laptop

  Hey people,

  I have a question about the new behaviors Overview - focusing particularly on the shortcuts for preview.

  First of all, I was very irritated that my spacear is not working as a preview button. Instead, he was and still is to switch to the hand tool. I have not found that two shortcuts for preview on my MBP modes: numeric keypad point (.) and Option + Numpad dot (.)

  But then I had the chance to work on an iMac and wow, the space bar was available as a shortcut overview - including all other modes, not just two as on my laptop.
  

  
  

  Then... on my German keyboard on my MBP, I cannot use a shortcut. Only this one works: Option + Numpad dot (.)

  The other is not accessible, because I do not have a NUMPAD on my laptop. Only with the use of a keyboard with a numeric keypad, the second works.

  But other options like trigger play / stop with the space bar, are not available. What the *?

  

  After a little research, I found this statement: " " These shortcuts are not configurable or affected by the new Panel controls overview. »

  And I have not found a tutorial topic or questions covering something similar.

  
  

  Dear Adobe, I want my SPACEBAR for playback on my laptop!
  

  Am I missing something (very simple)?
  

  Why don't we see only two modes to preview on my laptop? Where are the others?

  And why I can't change the shortcuts? (that would be a great for the next release supplement - why do we still use the old KeyEd script?)

  
  

  Thanks in advance

  Jakub
  

  Yo dear community, if anyone has the same problem - the solution is to remove the preference folder user found in the Library/preferences/Adobe/After Effects / 13.x

  Turn it back on.

  Works.

  THX adobe support

• cannot disable UAC

  I tried several times with normal disabled protocol on the UAC area without success... must have in other ways to disable UAC. Help.

  +

  Hello

  1. What is the error you get when you try to turn off UAC?

  2. what security software is installed?

  3. have you logged as administrator?

  4. don't you make changes to the computer before this problem?

  You can read these articles and check if that helps.

  Preview of the control user account: http://windows.microsoft.com/en-us/windows-vista/user-account-control-overview

  How can I change the behavior of the message user account control? : http://windows.microsoft.com/en-us/windows-vista/how-do-i-change-the-behavior-of-the-user-account-control-message

  Enable or disable User them Account Control: http://windows.microsoft.com/en-us/windows-vista/turn-user-account-control-on-or-off

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• You try to run any .exe gets the pop-up message "Please select the program to run rundll32.exe.

  Check on a friends computer; It can run internet explore unless she added as an administrator. you try to run any .exe gets this pop asking what program to run this title?  It could be an association of .exe that is messed up, or is it probably some strange virus?  I tried to install IE9, I was able to download but are unable to run.

  Start here (especially if you are not familiar with the UAC in Vista & Win7)-online http://windows.microsoft.com/en-US/windows-vista/User-Account-Control-Overview

• Why am I not the admin of my CPU? I have looked at other positions, has not found the answer.

  Hello

  I know this has been asked by others, but the answer given solves not my problem, I know that I can with the button right and do "Run as Administrator" but then every time I want to make changes to this file/program what he will say: access denied, it's particularly frustrating when I am trying to run a program updates When the program tries to go online to update the software, it cannot because the file was installed by the "Administrator".  Why I'm not just the default admin, it's my own laptop, I'm not on any network and I am the only user and it says I am the admin, but I am constantly having this prob, can anyone help?  Thank you.  Oh, I have a Dell laptop running Windows Vista, it is only a year.

  CPU = CPU ;) This has nothing to do with the permissions of the users in Vista.

  With UAC you have standard user rights. This is done to improve safety.

  What isuser account control ?

  Your permission, please: introduction touser account control in...

  User account control Overview

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How manage/copy/track db in Oracle

  Hello
  I'm working on ORacle db dev, so we have a few changes on a daily basis, and then we're going to change the location of the most recent source of the journal for each object control: sp, package, DOF, etc...
  
  Is there any good auto tool to make the snapshot for the whole db and have all the definition for dbo in one place practical, we fundamentally new to ORacle and our mangmt approach is very careful, but probably not to count. I feel that Oracle should have some tools for this fancy.
  
  Enjoy opinions or pointers to the right place.
  
  TX
  T

  In my view, a solution that would be appropriate in your case is the change OEM Management Pack

  http://www.Oracle.com/technetwork/OEM/grid-control/overview/change-management-pack-11gr2-datash-131286.PDF

  You will need license OEM and CM Pack separately

  HTH
  Srini

• More great overview of two weeks in the parental control

  I installed on my Win7 parental control computer. When I want to see how the computer was used, I can choose any date for the past two weeks, but I need to see overviews since I first installed the program. How to choose freely the dates?

  Related to: Family Safety: frequently asked Questions

  Hi John,.

  Unfortunately, one look at more than 2 weeks is not available in the parental control.

  You can provide us your comments by filling in the feedback forum.
  https://feedback.live.com.

  Hope this information helps.

• Overview of the clamp for the transition in effect control panel not displaying

  First Pro CC using - I don't see a display of the Preview "clip" showing a transition in effect when the panel controls. What I see is a "preview of transition", showed a small thumbnail. What is strange, it's that I saw it displays fine in another project, and now the clip appears at all.

  What it should look like:

  

  What is coming to me: (lack of "D" in the picture above)

  

  Have the impression that it is a simple solution, I forget? Thanks for any help!

  * EDIT: Seems to work for another transition, but not to dissolve them.

  Cross of dissolution is a bit the intruder.

  Hit the triangle just under the words put A Mood.

• pirate took control of the account of hotmail overview

  Hi, I have a hotmail account was hacked months ago.  I disabled the transmission of e-mail to hacker but find now it changed all my account information.  I can't get your hands on a real person in hotmail.  Problem is I want to add security questions and he changed it to only offer the option 'delete '.  If I'm going to remove his e-mail address to which he is for password reset information, it asks me to send an email to the address that I don't want and have her e-mail instructions to move forward.  What can I do here?  In my view, that I lost this account.  I can not add any information to check me if he has hacked into it and carried away all the options "Add."  Please, I want to find my hotmail account and won't change it because it is on my business cards etc.

  Hello

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Airport Extreme control app won't load on EL Capitan

  Two questions really.  I was looking for a complete manual for the AIrport Extreme, so I could find our wha that the capacity is before, I bought.  All I could find were manual installation.  Same story when I rang Applecare. It appeared that the only way to access the settings needed to run the application.  I downloaded the app and try to start it upward, hoping that it would require not just to know where was the Alex.  It was worse that the one - the app doesn't load, complaining that it was incompatible with my system.

  (I'll point out here that the only reason why I'm running that el Capitan is because of a run-in earlier with support Applecare who assured that the problem should disappear if I installed 10.11.)  It does not and it took four or five calls before I finally made to someone who knoew what he spoke.)

  So my first question remains: how will I know what the range of parameters for an Airport Extreme?

  Airport utility is built into Mac OS... you don't need to download or install any.

  Look under applications and directory of public services.

  But that won't really help you... the airport must be in the network to show you the real details.

  What exactly did you know?

  Let me assure you that the airport has a minimum of controls... really simplified.

  I have a Time Capsule, which is the same as the Airport Extreme, but adds the hard drive internal... to the extreme, you can add a USB drive.

  So here's a few screenshots.

  Short summary page.

  

  Summary page. Monitoring of each tab...

  

  

  

  

  

  

  

  Some menu options change if you select DHCP and NAT, for example.

  

  

  So miss a lot of what you might consider options...

  Read the review of the extreme on Smallnetbuilder for an overview of typical testers of routers.

  http://www.SmallNetBuilder.com/wireless/wireless-reviews/32158-Apple-Airport-ext magazine 80211ac-reme

• What are the icons of power control Widget?

  I've had my Motorola Atrix HD LTE for about a week now.

  I have the power control Widget on my main screen so I can quickly turn on/off wifi, bluetooth, etc. There is an icon on the widget, I don't know what it controls. It is two half circle arrows (see image). What is - this and it controls?

  Thank you!

  Adjustment power widget The Power control Widget gives you a brief overview of some of the tools that can drain your battery. The widget can enable / disable several features: Wi - Fi, Bluetooth, location (GPS) synchronization and also to adjust the brightness of the screen.

  Synchronization means sycing contacts, facebook widgets and other background data.

• X 7500: customization of mouse HP X 7500 (mouse control center)

  Hello

  I just bought the HP X 7500 Bluetooth Mouse.

  While the search for the best shape, I stumbled on the YouTube page of the HP which had an overview of the mouse X 7500 and said at the end of the video, for the other custimization, mouse HP control center can be downloaded from the HP Web site.

  It is close as well as in the choice of this mouse, because I need to customize the buttons of my mouse.

  To my surprise, the software is not available on the Web site, and after further research, I found a tutorial page saying that it must be installed on the CD that came with the mouse. Of course, there was no CD provided with the purchase (even if there was, I have no CD-ROM drive).

  This pretty much of making the mouse useless for me, and no google search returns all results for mouse control center.

  All other mouse I had previously came with its own software (other brands, it's my first HP) allowing the user to customize his buttons and resolution/sensitivity etc.

  Anyone know where I could get the software, or maybe someone has a CD laying around? The mouse seems to fit comfortably in my hand, and it would be shame to return simply because HP is once more rather incompetent at his service.

  Any help would be appreciated!

  Hello @Kastytis,

  Welcome to the Forums of HP Support!

  I stumbled upon your post on the issue of the mouse and wanted to help!

  The Control Center software is available for the mouse on the HP site, but not for Windows 10.  You can try to use the software for Windows 8.  You can find the mouse drivers here:

  Drivers - X 7500 HP Bluetooth wireless mouse

  Let me know how it goes.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Control and Simulation in a loop / while loop with TCP/IP reading / writing of synchronization

  Hello, I have a problem with reading TCP/IP and written in two loops. The problem is NOT to get the two loops to read and write to and from the other. This has been accomplished. My problem is when I run control and the loop simulation on my laptop and the while on a RTOS remote on the controller on-Board of LabVIEW in a remote PXI chassis, the while loop the remote system running on four 4 times faster than the loop control and simulation on my laptop. In other words, for each iteration of the loop control and simulation on my laptop, there are 4 four iterations of the while loop on the remote system. I need to know how to get a degree of kinship (1:1) with these iterations of the loop. When I run a longer simulation in real time, say 10 seconds, the control and Simulation loop begins to slow, i.e. the simulation time slows down until it is no longer in real time and the "Late Finish"? Parameter is set to true and the LED lights and continues to stay lit. At this point, the system destabilizes due to what I believe is being well sampling rate too discreet and I have to end the simulation. How can I get a ratio of one to one between the loops and also to avoid slowing the loops causing destabilization?

  To give an overview of my application, I implement a control system in a network, seen in "image2.png". This is achieved using my laptop as a subsystem 1. Reference signals are generated from the laptop and the error signal is produced. Control measures taken and the control signals are sent via TCP/IP to the remote system. Position feedback is returned, and the process repeats. My system has Core I7 Procs w / 3 GB of RAM, up to 1 GB/s speed via ethernet and LabVIEW 2011 installed with all necessary modules and networking tools. The attached VI Custom_Wireless_Controller works on my laptop. The remote system I'm working on that has the 7830 NI R Series with FPGA card. OTN runs on the PXI chassis with an enbedded controller that has networking capabilities of up to 100 MB/s via ethernet. I use the FPGA for the acquisition of data and apply control signals to my plant. The plant is the PCE twist connected to the FPGA through the cable of the ECP - RIO of NOR. Subsystem 2 is this side of the CNE. The FPGA collects position, he sends to the controller via the network, receives signals from the network drive and writes signals to the plant power amplifier that operates the plant. This process is repeated and the VI and is titled Custom_Wireless_Plant.

  I appreciate the help really and look forward for her and for any question!

  Well, the first step is to understand what you have set up right now. Your control and Simulation loop on the side of the controller is configured as 'Runga Kutta 4' and you have a loop timed on the other side. In addition, you have the primitives of TCP/IP on the control and the Simulation diagram and means he will perform (a message) on the size of each minor step, which in your case is 4.

  So, you have two options:

  1. replace the Solver side controller Runga Kutta 1 (this must synchronize loops)

  2. hold RK 4, but create a Subvi around two primitives of TCP/IP and configure from the VI to run than the major (continuous) step-size. If you do it right, you should see a 'C' on the upper right part of the VI you have created.

  Please let me know if what I said is not clear...

• Custom control with couple or the input voltage system

  Hello

  I'm relatively new to LabVIEW and this is the first time that I'll use for an application of movement. I have a controller/chassis cRIO-9074 with a few modules NI 9514 IO, servo motors and drives, and I'm trying to do is to use a custom control in my system (a sliding mode control law) to generate the signal for the movement of the engines. I was able to produce a movement OR softmotion but so far I've been able to produce with position, speed and acceleration as inputs and to optimize PID gains. What I want to do is to send commands to torque or tension from the entrance of my right to command control is torque for motors. What I was wondering is if it's possible with the components that I use now and if someone could direct me to useful articles or books that can help me.

  Sorry if is a noobie question but I only worked theoretically with systems of control far and I didn't simulate the results with matlab before that. It is the first time that I had to get the experimental results to validate my proposed control right. Thanks in advance.

  Hi,.

  This may be possible, but since sending the commands of torque or tension directly don't are not supported in scan mode, you can use your 9514 FPGA mode.

  This link describes the components needed to run the FPGA device.

  You should be able to find examples in the Finder for example NEITHER, but here is an overview of the use of FPGA that can be useful as well.

• Impossible to implement the ratio control

  I've already posted a question about how to store the values of the previous variables in labview, but do not have all the answers.

  I hope this time I will get some advice or rather the solution.

  I have three parameters A, B and C (they denote percentage values) and their corresponding inidicators. For the first time, the user will give two entries. So the third will be automatically calculated from the sum of the two inputs and subtracting hundreds. Next time, when the user modifies an entry, the other two can get a change. I am facing problem in this part of auto-tuning. In the attached code, I designed the initialization stage in 0th step of the sequence of the battery and the auto tuning part in the 1st stage.

  Now that the three commands are reliable inter, I want to take three reports IE a B/C and c/a. As the total unit is 100, so we'll have a modifed has for various B = 100 - B - C is to say 100-B(1+C/B). Simililarly for a variable, we get updated, C = 100-A(1+B/A) and for the variable C, we get a modifed B = 100 - C (1 + A/C). In the auto part, I am firstly adding all parameters and is assimilating it to the 100. The Boolean result active loop true or false. If the case is true then everything that comes in the control gets displayed in the indicator. If the case is wrong, everything that comes in the control is displayed in the indicator as well as changing the value of the other a variable. Here I am alone to face the problem. I am not able to connect the input with the indicator control.

  It will be a great help if you give me some solutions or advice regarding this problem. I enclose the code that is not yet complete, an approximate overview.

  Thanks in advance.

  I have more LabVIEW 6.1, but here is a simple implementation in LabVIEW 8.2 and a corresponding image.

  Note that there is no case of a single event and the code is scalable. It can easily be adapted to more than 3 orders by developing the entire table and some minor code changes (for example instead of division by 2, divide by "table size - 1").

  Perhaps you can adapt to LabVIEW 6.1...