control paginated for Department 11.1.1.5.0 and others.

Similar Questions

• Executable for freecell has stopped working... and other games too.

  Executable for freecell has stopped working... and other games too.  I tried to uninstall and re-install of the windows features option, but it did not help.  Anyone got any ideas how to fix?  Have no idea what caused the problem that I play them often.  Windows Vista Edition Home Premium.

  Thank you all.

  Your profile problem would be assigned to a corrupted profile - if you look in the file C:\Users\, you should always have on your documents.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Between that and the problem with the games, it would be a good idea to perform a scan of the hard disk, just in case where it fails.
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note that even though the disk check said it corrects a problem, I recommend to backup your data.

  You can also try a system restore to before the problem began:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  It can solve the problem of profile as well, assuming that the hard drive is fine but if not follow the steps above.

• The printer control page does not appear, page with scanning, printing and other options need

  Original title: Page printer control

  When I opened my window printer the normal screen to control the printer does not appear.  How can I get this to come form? I need to the page with the scan options, printing and others.

  Hello

  1. are you referring to the preview before print screen or is it a screen of the printer software?

  2. what program you are trying to print from?

  3. This occurs when you use another user account?

  Method 1:

  You can check if you are facing the same question in the user account new or different administrator account.  You can create a new user account on your computer, and then check.

  Create a new user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If you are not faced with the same question in a new user account, you can check the link below and use the steps provided to screw a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 2

  You can check the question in the clean boot state. Check out the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

• Solution for capturing videos from VHS, Mini-DV and other ribbons

  Hi friends

  We have a lot of tapes, VHS and Super VHS (old memories of family). In the last decade (wow hehehe) we had a Pinnacle DC - 30 and after a DV - 500 (acquisition card) to capture these videos.

  Now, our camera is based on the memory card, it s so easy to download movies. We do not have a computer equipped with a capture card anylonger (the maximum is a firewire and USB card).

  My question is: Y at - it equipment or a solution to capture these videos from VHS, Mini-DV and other bands. For example, the video CD has an RCA output... If having a way to turn the signal by Firewire or USB, that would solve.

  For mini DVs, we have an old Sony HD1000 camera, but this device firewire output is damaged :/ So, we can also not to capture videos of these bands any longer.

  Do you know a solution or material? (I know a capture card as a Matrox would be a good solution, but now it s a little expensive for capturing videos )

  Thanks much for the tips

  Gustavo.

  http://www.grassvalley.com/products/converters

• What happened to the menus file, edit and view for mac 0s10.8.3? F10 and other solutions do not work? ESN can't work

  I just got a new mac OS 10.8.3 and newest firefox. I can't find the menu bar, I can't close without force quiting, can't even tell what version I have. Whenever I try to use the arrows to change as suggested display full screen makes it worse. I have studied the subject and tried the fixes recommended as F10, optionF, etc., and nothing works. Help, please?

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  Try to remove the plist of Firefox (org.mozilla.firefox.plist).

  • http://www.MacFixIt.com/article.php?story=20060606082246983 how the .plist files become corrupted and results troubleshooting

  Go to "~/Library/Preferences" and delete the plist for Firefox (org.mozilla.firefox.plist)

• Allowing the AMD Radeon R9 M370X (MacBook Pro mid-2015) for accelerating GPU on Adobe Premiere Pro and other

  Hi all

  I just "upgraded" my MacBook Pro to a model of end of 2013 with a NVIDIA GeForce GT 750 M to a whole new model mid-2015 with an AMD Radeon R9 M370X.

  To compare performance, configure queues of same rendering with Premiere Pro Media Encoder in four sequences. These sequences contained native 4 K XAVC I, but four sequences have been "cropped" on a chronology of 25 1080 p, which means that I actually not export 4 K images. All four were slightly different, but while a 50 minutes.

  As I wanted to get an example of 'real world', I left on the old machine as CUDA rendering engine, as it's the best performance I can get the machine and the rendering engine on the new machine that OpenCL.

  I have to fill out a similar task at least once a week, so I know by experience, a queue of rendering as it takes about 2 hours by sequence to return.

  The results were very interesting and a little tell-satisfactory. Essentially, render on the CUDA compatible machine times were about 30% faster through all sequences of four compared to the AMD powered machine.

  Perhaps, somewhat lengthy explanation, but basically, I would like to know how to activate the acceleration in Adobe CC GPU - but especially with Premiere Pro, After Effects and Media Encoder.

  Apple seem to think that they support OpenCL (https://support.apple.com/en-us/HT202823), AMD announce their compatibility with Adobe CC (http://www.amd.com/en-us/solutions/software-partners/adobe) - then why my GPU does not appear as a recommended here model? - https://helpx.adobe.com/premiere-pro/system-requirements.html

  Any advice or suggestions are appreciated.

  Hey Connor,

  This R9 card comes out MAY 2015 and 2015 CC was released on June. So, any card (s) that is listed in Premiere Pro specifications list must pass appropriate tests. In addition, credit cards that has a 1 GB of VRAM is likely to allow "mercury Playback Engine" for use CUDA or open CL features.

  According to the rendering time is considered as MVidia GT 750 M has a priority on AMD R9 M370X. You can check and compare the two cards, and also check the link below.

  Radeon R7 M370 vs GeForce GT 750 M Mac

  Vinay

• Script for measures relating to the document change and other details of size in all open documents

  Hi all

  Once again, in my work, I have to change in several files to the size and type of specific measures:

  -in the preferences "units and increments:

  thumbs to milimiters

  and the increment of cursor keys

  -J' I also need to change the document format

  width and height

  and size of bleed.

  Would be a great help if I would be able to change this once to a set of open files... in my work I need to do this all the time... and of course, I miss the "apply to all open documents.

  Thank you

  Rui

  Hello Rui,

  Try something like this:

  app.documents.length && app.documents.everyItem().properties = {
      viewPreferences:{
          horizontalMeasurementUnits: +MeasurementUnits.MILLIMETERS,
          verticalMeasurementUnits: +MeasurementUnits.MILLIMETERS,
          cursorKeyIncrement: '1mm',
          },
      documentPreferences:
          {
          pageWidth: '200mm',
          pageHeight: '250mm',
          documentSlugUniformSize: true,
          slugTopOffset: '10mm',
          },
      };
  

  @+

  Marc

• By opting for the local account affects the current files and other documents are store in the pc.

  I have windows 8 is installed in my desktop pc

  I want to move my account to GO to THE LOCAL because of user setting I m tried to synchronize my app Mail for new emails and other stuff his watch still unavailable then, opting for the account local affect current files and other documents are stored in the pc at this moment before I spend.

  Hello

  Passage of the account Microsoft local account will not affect your personal documents saved on the computer.

  Reference: http://support.microsoft.com/kb/2782145

  It would be useful that you could provide more information on the problem faced with synchronization.

  -What is the exact error you get when synchronization Mail app and other apps?

  -Do you use all parameters of proxy to access the internet?

  -Remember to make changes before the show?

  -What anti-virus software is installed on the computer?

  If you encounter the problem of synchronization with all applications, then I ran the http://download.microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab Apps store

  Navigate through the steps mentioned in http://windows.microsoft.com/en-us/windows-8/what-troubleshoot-problems-app

  Check if you have any proxy enabled. If so, then delete it.

  a. open Internet Explorer.

  b. click on tools and select Internet Options.

  c. click on connections.

  d. click on LAN settings.

  e. remove the check mark next to proxy server.

  f. click OK and check if you are able to synchronize emails.

  If none of the steps work, try to remove the account from the messaging application and add it again and check.

  Go through http://windows.microsoft.com/en-IN/windows-8/mail-app-faq

  Hope this information is useful. Let us know if you have any questions.

• I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for comparability and opening the homepage whenever I starts the browser.

  Windows 7 64 bit
  I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for compatibility and opening the homepage whenever I starts the browser. I keep having to go back to version 9 to solve this problem.

  Sorry to be a while back! It tried unsuccessfully so this AM, gritted my teeth and deleted the FF programs folder and downloaded and installed FF 10.01. He was still struggling with the same problem. Went in the appdata folder and two files sessionstore.js there. Delete both, restarted the browser and no verification of the compatibility of the modules was done at first upward and the additional tab for welcome to FF was the opening is no longer all seems to work as it should and I did not lose any of my settings... Thanks for trying to help, and I hope that my solution helps someone else who could this experience in the future. Hoping that the next update will smoother!

• Help for tone control utility for Windows Vista x 64

  Hi, I have a HDX X 16-1375DX .

  I change windows and I can not find: Tone Control Utility for Windows Vista x 64 Driver (this package provides the utility of the tone (Bass/Treble) HP control.

  Please help me find that.

  Thank you

  When Vista, the software is in the Media Smart Smart Menu. This version has a fix for the bass and treble

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-82360-1 & LC = on & DLC = in & CC = US & os = 2100 & Product = 3979260 & sw_lang =

  If you upgraded to W7 so see this thread.

  http://h30434.www3.HP.com/T5/operating-systems-and-software/HDX16-buttons-in-Windows-7/m-p/154571#M22986

• How to: using the same control panel for several vi and reproducing change to the control panel.

  I created a labview project that contains about 40 vi.  Each vi has a joint control panel which is a group of ip address, or address of the port and the parameters that are passed high-level vi at low level vi for the purpose of control and access our daq cards.  As this control panel exists in all the vi and must not be the same there is a problem when the need to make a change or update the controls during development.  The problem is how long it takes to go and change the control panel of each single vi.  I wish I had a way of reproducing a change in the Panel of control through all six simultaneously.

  All controls in the control panel are in a bundle, so all values are passed to 1 thread.

  I tried to turn the Panel in a sub vi and this way I can just "create control" and have output parameters maniuplate vi, but if I update the vi, I still have to go back and create a new control for each vi under the control has changed.

  I tried using secondary and the creation of the control panel in a sub vi which is displayed in the secondary, but gives the undesirable consequence of not being able to view or change the settings of the control panel if the program does not work, as pristine as when sub-panels program does not work.

  Is there a another way to display the front panel of a Subvi next using a panel of void?  Is there a better way to propagate changes in a bundle in a series of vi?

  Yes a def type might help you and I would take the next step to make a strict type def if you want the look to be the same on all its bodies. You can also view this nugget on Type definitions for more idea about it.

  Have fun

  Ben

• Parental control Microsoft for Android?

  Is there or is there soon a version of Microsoft's parental control for the Android platform?

  Can't speak to the future, but I doubt it very much.  Windows Phone well mature, however, have Kids Corner and other functions, and the ecosystem of the app is finally catching up too. Might look like what it offers.

• Option missing Scan from the control panel for my Officeject HP 8600 pro. How can I get that back?

  I have this printer for a few months now - it works well until today.  Option missing Scan from the control panel for my Officeject HP 8600 pro.

  I have Windows 7

  Access has been-

  Beginning

  Devices & Printers

  HP Officejet 8600

  He opens a box that had a detection option (later), which I clicked to bring up the scan dialog box.

  The option disappeared. I have no idea how it happened.

  How can I get that back?

  1. first of all uninstall the software

  • Click on start button, then go to programs > HP > Officejet 8600 and click on Uninstall.

  2. then go to Control Panel > programs and features

  • Officejet 8600-click and then click on uninstall a program
  • 

  3. then download the software on the HP web:

  •  HP Officejet 8600 - drivers and full software features - Windows 7 64 bit

  4 and install with the downloaded software.

  Hope these steps help you,

  * Click the stars KUDOS to say thanks

  * Click the accepted Solution if the answer to the question.

• HP Deskjet 2050 'control panel' (for lack of better term) missing

  This morning, I clicked on the link that was created when I installed my HP Deskjet 2050 and the 'normal' Panel controls color black and blue with buttons to click on for printing, scanning, check the ink levels and all kinds of other things appeared.  I used this dozens of times link since I had this printer, and whenever I was sent to the good 'control panel' buttons to make things.

  I clicked on the "scan" button and went about my business-

  I scanned the 4 pages of homework in a single PDF.

  I went to my office and opened the .pdf to check the quality.  (I did not close the window of program analysis.  The Control Panel has been closed when open scanning window.)

  The scanner has been created to analyze the incorrect page size (results of a project from the beginning fo this semester) and I re-scanned 4 pages to the appropriate size.  Saved.  Check again once, it was fine this time.  I closed the digitization program.

  Later today, I clicked on the same link mentioned above, and for some unknown reason, I get a completely different screen.

  

  To the best of my knowledge, there have not been change file (last was 16/11/12, which was certainly not in the time I found the control panel that I use usually missing) or driver updates or something of the sort that caused my "printing, scanning, etc." link to no longer open the correct control panel.

  There is a "Control Panel" completely different available not an hour before that I started to see the Junk above.  (And the "Wizard of the printer" button above does - nothing - at all either!)  There are 6 or 8 buttons which included objects such as a scan of pages option and make copies.  The previous control panel was also much more black than white.

  How to bring back the old control panel with other options?

  Hello

  HP has released a new version of the software and the question that's happened as the software you are using is obsolete.

  Please remove the software by clicking Start > programs > HP > HP Deskjet 2050 > Uninstall.

  Download and install the new software below, which should solve the problem and bring back any option:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109407-2&cc=us&DLC=en&LC=en&OS=4062&product=4027469&sw_lang=

  Shlomi

• How can I separate pagination for a world region?

  I had a delightful time using a common region, set to a page global when I found that the paging parameter has been start transported from one page to another.  Arghhhh!  Thus, for example, if I've paged to the second series lines (11-20) on 1 Page (page) and then I go to Page 2, the second series (page) of lines (11-20) appears here.   If I go on a page that only has a first set of lines (1-10), I get the pagination error "Invalid rowset requested, the data source of the report have been changed. Reset the Pagination.  And when I click on reset, it takes just the error.  [I guess he's trying to show again the second series or rows (11-20) - that does not exist.  What about crazy?]

  How can I separate pagination for a world region? I want what he operarate as he would if she did not share a common region.  So if I'm looking to lines (11-20) on page 1, I can go to any other page with lines 1-10 Start, it.  Then back to page 1 where I left with 11-20 displayed lines.  One solution is NOT to paginate, but this isn't my favorite solution.

  Howard

  Howard(...inTraining) wrote:

  My task, as assigned, is to replace the output in an EXCEL worksheet.  If I followed closely the L & F of the spreadsheet, I would have all the displayed lines, and this problem should disappear.  But alas, I'm giving him the 'Nice' air of pagination.  No, it's not an APEX 'report '.

  Columns... lines... paging... sure sounds like a report of duck.

  [I turn the original question to the question you raised.] Is the Page Global of formatting that I want to keep reusable.   There are 8 eight identically formatted pages.

  Is a generic page not possible? Which requires that there be eight?

  Columns of perhaps 10 to display and data 4 to 175 lines.  The data display is dense and I worked, for literally months, to get a similar format.  (This is the reason for all the questions of formatting, I asked).   Some link columns to edit pages.   I went to a global Page so that changes could be made in one place and will appear in all 8 pages.   If I need to change the width of a column, I don't want to make that 8 times.  Or having to check 8 different pages to make sure that I have all the same.

  All reusable formatting techniques?

  Templates, CSS, chains of substitution and the reusable SQL above.

  Suggest to offer a concrete example on apex.oracle.com and see what we can achieve.