control reversed (or log) scale, XY
I would like to represent the scale reversed in XY graph.
How can I read or write the property of inverted scale?
For example, as shown in the room attached, the range property has not shown the information of inverted scale.
But I can control these properties (record or reversed) in the property dialog box (by right mouse clicking on) for each scale.
labmaster
Hi labmaster,.
Sorry for the bad suspicion.
But: range adjacent to the property, you will find the property 'Reversed' who does what it takes...
Tags: NI Software
Similar Questions
-
Reverse the graphic scale without game Flipped or properties window
There is a way to reverse scale Plot without game property reversed by program or set the option reversed on Properties window?
I've created an executable program in labview and in any part of the code is a property that is reversed and the Properties window is not available. But a user program
make the chart from right to left, sliding fliped.
Are any combination of the actions with the mouse and keyboard to make the reversed scale? Is there any combination of the property values for this?
You mean that one of your users hit the scale, and you don't understand how? Fix?
You can change the scale of clickin on one of the two ends and by entering a number in this location. With this action, you can return your scale.
You can check this by registering for the event "change of scale.Tone
-
Hi, I have a switch to digital caliper with min = 0, max = 60; so at the bottom is the value 0 and the Summit is 60.
I want to return to the slide for the 60 is the basis and the value 0 to the box top I do that.. ?
I use cvi 8.5...
Thank youSalvation;
In fact, if you set the lower and upper limits for your control and use the text tool to change the labels in your control, it will be automatically changed to go in reverse, I enclose a picture to explain this more graphically.
Hope the information is useful.
Good luck
-
Hello
I'm putting it on oracle 11.2.0.1 to 11.2.0.3 DB level but during DBUA, I got error
"ORA-00205: error in the identification of control files, check the log of alerts for more information.
I have check the alerts log in E:\app\kmahalingam\diag\rdbms\orcl\orcl\trace\alert_orcl.txt
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SNA system picked latch-free 3
With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST
Autotune undo retention is enabled.
IMODE = BR
ILAT = 51
LICENSE_MAX_USERS = 0
SYS audit is disabled
Commissioning:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
With the options of partitioning, OLAP, Data Mining and Real Application Testing.
Windows NT Version V6.1 Service Pack 1
UC: 8 - type 8664, 8 physical cores
Process affinity: 0 x 0 x 0000000000000000
Memory (success/Total): Ph: 3241 M / 16383 M, Ph + FCP: 16565 M / 32765 M
Using parameters in spfile E:\APP\KMAHALINGAM\PRODUCT\11.2.0\DBHOME_2\DATABASE\SPFILEORCL server-side. ORA
Parameters of the system with default values:
process = 300
sessions = 472
memory_target = 3280M
control_files = 'E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL.
control_files = 'E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL.
DB_BLOCK_SIZE = 8192
compatible = "11.2.0.0.0."
db_recovery_file_dest = 'E:\app\kmahalingam\flash_recovery_area. '
db_recovery_file_dest_size = 3912M
undo_tablespace = 'UNDOTBS1.
Remote_login_passwordfile = "EXCLUSIVE."
db_domain = "cpg.com."
dispatchers = "(PROTOCOL=TCP) (SERVICE = orclXDB)" "
audit_file_dest = "E:\APP\KMAHALINGAM\ADMIN\ORCL\ADUMP".
AUDIT_TRAIL = 'NONE '.
db_name = "orcl".
open_cursors = 300
star_transformation_enabled = 'TRUE '.
diagnostic_dest = "E:\APP\KMAHALINGAM".
Fri Mar 07 00:33:15 2014
PMON started with pid = 2, OS id = 25072
Fri Mar 07 00:33:15 2014
PSP0 started with pid = 3, OS id = 25688
Fri Mar 07 00:33:16 2014
VKTM started with pid = 4, OS id = 27608 high priority
VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms
Fri Mar 07 00:33:16 2014
GEN0 started with pid = 5, OS id = 11484
Fri Mar 07 00:33:16 2014
DIAG started with pid = 6, OS id = 16980
Fri Mar 07 00:33:16 2014
DBRM started with pid = 7, OS id = 2200
Fri Mar 07 00:33:16 2014
DIA0 started with pid = 8, OS id = 8024
Fri Mar 07 00:33:16 2014
MA started with pid = 9, OS id = 15688
Fri Mar 07 00:33:16 2014
DBW0 started with pid = 10, OS id = 19908
Fri Mar 07 00:33:16 2014
LGWR started with pid = 11, OS id = 22616
Fri Mar 07 00:33:16 2014
CKPT started with pid = 12, OS id = 12828
Fri Mar 07 00:33:16 2014
SMON started with pid = 13, OS id = 10184
Fri Mar 07 00:33:16 2014
RECCE has started with pid = 14, OS id = 28984
Fri Mar 07 00:33:16 2014
MMON started with pid = 15, OS id = 22288
Fri Mar 07 00:33:16 2014
MMNL started with pid = 16, OS id = 12072
commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
commissioning or shared server 1...
Environment ORACLE_BASE = E:\app\kmahalingam
Fri Mar 07 00:33:16 2014
ALTER DATABASE MOUNT
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 marked during: ALTER DATABASE MOUNT...
Fri Mar 07 00:34:46 2014
ALTER DATABASE MOUNT
Fri Mar 07 00:34:46 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 marked during: ALTER DATABASE MOUNT...
Fri Mar 07 00:45:51 2014
change the database editing
Fri Mar 07 00:45:51 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 scored at the course: change the editing of the database...
Fri Mar 07 00:48:13 2014
change the database editing
Fri Mar 07 00:48:13 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 scored at the course: change the editing of the database...
Fri Mar 07 00:52:34 2014
Derives from detected time. Check the file path VKTM for more details.
Fri Mar 07 00:53:46 2014
Closure of proceedings (immediate)
Closure of proceedings: in addition to logons disabled
Stop background MMNL process
MMON background process stop
The high waters = 1 license
All dispatchers/dispatchers and shared servers stop
ALTER DATABASE CLOSE NORMAL
ORA-1507 marked during: ALTER DATABASE CLOSE NORMAL...
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
Fri Mar 07 00:53:49 2014
Stop background VKTM process
Fri Mar 07 00:53:51 2014
Instance shutdown complete
Fri Mar 07 00:54:01, 2014
Setting the default value of the parameter parallel_max_servers
320 to 285 because of the value of the process parameters (300)
Help, please
Thank you
According to spfile.
control_files = 'E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL.
control_files = 'E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL.
You mentioned
Davinapochon wrote:
E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL02. CTL file is there but there is no CONTROL01. CTL file.
So little confused here.
E:\APP\KMAHALINGAM\ORADATA\ORCL\--> must contain CONTROL01. CTL
E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\--> must contain CONTROL02. CTL
What is it now?
Anand
-
hot flashes control point transaction log
Hello
Is there a way of hunting/purge the transaction logs, other than to drop the schema for replication?
Published by: 899967 on November 27, 2012 12:52 AMIf the logs are kept even after the two control points, so it is because they are required for replication. This means either that replication is not working or is it falling far behind. Newspapers to be served in a number of ways that you can do, but it will lose all pending transactions and replicas will be out of sync. You can then choose a replica as the "golden master" and re-instantiate copies which form using ttRepAdmin - duplicate.
The two ways to "purge" the newspapers are:
1. stop the repagent and then slide the replication scheme. Recreate the schema, restart the repagent, drop each Subscriber and reinstantiate the use ttRepAdmin - double.
2. use ttRepAdmin to define the "State" of the flow of replication from the node with logs accumulated at each Subscriber to 'stop '. Drop each Subscriber, then re-instantiate then using ttRepAdmin - duplicate.
(2) If a single subscriber results in the accumulation of journal you can apply it selectively to just this Subscriber.
Chris
-
What are the 'additional Control Point', 'current log tail' and RBA
I myself messgae in the alert log file
In reading articles on Oracle and the Oracle documents, I have also come across these three terms muchIncremental checkpoint up to RBA [0xe.58bfe.0], current log tail at RBA [
I really want to know what they are in a short and clean definition. Lengthy discussions are devoted to "Incremental Checkpoint" in the urlIncremental checkpoint current log tail RBA
But I got confused.Incremental Checkpoint http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:19311485023372
There are many different types of control point - the thing they have in common is that they require the database writer to write disk blocks (see the last part of this post: http://jonathanlewis.wordpress.com/2007/04/12/log-file-switch/).
The "additional control point" is simply the name given to the event of control point which is scheduled to occur every three seconds and allows dbwr to write of disk blocks that have first changed more than a certain distance in the past.
In this context, RBA means 'redo the address bytes' (address of block redo only sometimes) identify a location to a redo log file.
The 'end of the newspaper' is the latest ARI redo entry written in the restore log file growth.In a control post additional dbwr derives a value for a Resource that represents a previous point in time and written on the disk of the data blocks that have been changed by generated redo before RBA and have not been written to disk since this change.
Depending on the configuration of your settings file the previous RBA may be derived in a time lag, a volume of roll forward or the number of blocks of data that have to be modified for the IRA at the end of the paper (actually).
Concerning
Jonathan Lewis
http://jonathanlewis.WordPress.com
http://www.jlcomp.demon.co.UKPublished by: Jonathan Lewis on June 27, 2011 23:15
Improved the writing and editing of a fault. -
3D graph log scale "characteristic".
Another annoying feature has just discovered in the 3D graphic object: scale logarithmic, you can set the limits of an axis, but it will be ignored by the chart itself.
For example. Here are the settings that I set for the axis Y. Note the minimum value of 5?
Well, fat chance... Here's what LV is willing to do:
Now, in edit mode, I can change the balance itself and force the smallest value of the y-axis to 5, but here is how it goes:
Not cool!
Hi X-).
This was reported to R & D (# 292956) for further investigations.
The best solution is to make sure that you set the minimum and maximum values for a logarithmic axis of a power of 10.
Thanks for the comments!
Chris
-
questions of small scale log values
I have a strange problems with tracing values in graphs for NI Measurement studio WPF. This problem occurs when the axis is log based on and the value on the axis spans less than 1 to 1 (i.e. 0.001 to 1000). The chart automatically change the lower x-axis to limit to 1. The behavior is similar to the one reported here (http://forums.ni.com/t5/Measurement-Studio-for-NET/log-scale-won-t-scale-to-show-small-values/m-p/27...) but in my case, none of the mapped value is 0 or less than the lower limit of 0 and the axis is set to greater than 0.
The code below will reproduce the problem:
Focus() pt = new Point [100];
for (int i = 1; i)<=>=>
{
PT [i-1] = new Point (0,1 * I, me)
}Field pl = new Plot ("test");
PL. data = pt;
Graph Plots.Add (pl);
Where the x-axis of the graph are log10 scale (and the boundaries are defined on {0,1, 10} in the code .xaml) and the y axis is linear (no matter the scale really). The chart automatically x-axis it 1 and this can be changed to 0.1 but it comes back again to 1 if the visible property of the chart changed.
This behavious doesn't happen if all the x-axis values are less than 1 or greater than 1 that is the code below to draw correctly and the axis is not reset to 1, etc.:
Focus() pt = new Point [100];
for (int i = 1; i)<=>=>
{
PT [i-1] = new Point (0.001 * I, me)
}Field pl = new Plot ("test");
PL. data = pt;
Graph Plots.Add (pl);
Someone knows it why it behaves like that and what can we do to fix this?
Which seems to be the case, it's that the default
FitLoosely
range adjustment see values ranging from 10-1 to 10-1, and then choose a range of0,10
for data. Since no one can be represented on a logarithmic scale, forced the scale to an arbitrary value, less than ten years, thus giving a final range of1,10
and truncating low values. I created a task to solve this problem.To work around the problem, you can change the
Adjuster
on the scale to another value, such asFitExactly
. -
Digital control over several orders of magnitude
Hi all,
I'm trying to get a digital control with a suitable addition to the order of magnitude.
For example, I have a front panel for an osziloscope, sometimes that samples on some ns, sometimes a few seconds, sometimes a few milivolts, sometimes a few volts, who knows, right
I was playing around with the digital control units, but it doesn't quite fit my needs. I can't change the prefix of a unit on the duration, for example of microseconds to seconds, but then I change the issue as well, because on change the prefix, the previous number is only multiplied by the factor according to, for example, 1000, so 5 became US 5th-6s. So change the record length of the default value of 500 ms to 100 ns would require two klicks type, and I can instead just type "100th-9', which is good too."However, I would like to have a digital control from 0 to 1000 combined with for example a button for prefix i.e. nano, micro, mili etc. and combine this values internally, i.e. of mulitplying accordingly. But I couldn't set the increment to "3 orders of magnitude" even with the option to log scale.
I know, I could use an enum with the names and values according to, but this is not very satisfactory.
So perhaps the question would be: is it possible to combine two digital controls or the value for the prefix, in a suitable and easy way? Or how do you manage the digital values over several orders of magnitude in a case like mine?
Thanks for your replies in advance.
Best,
bastlwastl
Display format is SI units
It helps in these situations
-
Control Panel opens but reports: CreateKey failed 5
By opening the Control Panel, I get the error message box gift: System\current control Set\Services\Log guide\: CreateKey has no 5.
The Control Panel icons are displayed but are frozen and the only action available is to close Control Panel by using the Task Manager.
Can anyone help?
Hello
You have recently installed something or updates of drivers? Looks like that some application/update / driver messed up something really wrong in your system.
Would appreciate any comments...
Welcome them
-
Graph XY - linear scale data overlay / Journal
Hi people,
I'm in LabVIEW 2012 and I have a (x, y) dataset I want to draw on a set of dimensions. I also want to superimpose a second horizontal axis with the same data, but using a set of units on the scale (xStar). You can watch the enclosed screws to see how x transforms xStar, but it's basically the quadratic formula with an exponential lift. The x values are plotted on a linear scale, but because of this exponential transformation xStar-values are reported on a logarithmic scale (see image).
I want these two studs--(x,y) and (xStar, y)-to overlap exactly what they are actually a single parcel. That, in view of all (x, y) point, I can quickly raise the value of xStar glancing at the scale of the secondary axis. x and xStar are two useful physical parameters, then it is useful to be able to read one or the other on the chart depending on the situation.
Any suggestions on how to get these two plots overlap? Currently, I use the min/max-x values to generate appropriate min/max values xStar, which makes the plots suitable for endpoints (but not between the two). I also need to specify somehow scale increments? If so, what is a good method to achieve this?
Thank you!
The non-linear relationship (no log) is between x and xStar, you chose a logarithmic scale grid, so I guess that 'linear' scale must be adjusted.
Since the x-> xStar relatiion is given and fixed to a scale, you can create an image on the chart with the tools of photography.
read the newspaper scale min and max, read the pixel length x in the plot area and when the scale is changed (event) recalculate and pull scale "lin".
-draw minor ticks, draw the main graduations and numbers.
I would just use a scale, add a cursor block him to the plot and use changing the same cursor (read pointindex, get x, y data) to view xStar, x and y
I posted a vi accidentally in this old thread
-
My daughter is unable to launch the iTunes store in iTunes when parental control is on. If I turn off parental control it works. See this post- http://social.answers.microsoft.com/Forums/en-US/vistamedia/thread/64a593eb-8ae4-4605-86f6-8a941244f2d1/ - the answer it does NOT solve the problem, and you can see at least 3 others have the same problem as I am.
To reproduce:
-Download and install iTunes.
-Create a user of Vista with Parental controls active.
-Log in as user, and launch iTunes. This method works.
-Try to access the iTunes Store. It hangs and never ends.
-Add web sites to the list of 'Green' in the Parental control as suggested in the post mentioned above. This has no effect.
-Select "allow all websites and content. There is still no effect.
-Disable Parental controls for the user. link iTunes Store arrives without problem.I find that my daughter is unable to access the iTunes store unless I have turn off the parental control. I would use Parental controls. Help, please. Thank you.
Rock you. Yes, it seems that this problem could be solved by adding iTunes in the HTTPExemptions list. In particular, adding a String key under:
HKLM\Software\Microsoft\Windows\Current Version\Parental Controls\HTTPExemptions
The key name and the value must be the path to the executable to iTunes (c:\program files\iTunes\iTunes.exe on my machine).
I guess the drawback here is that now that my kids could, theoretically, use iTunes to access any URL on the internet, but to my knowledge, there is nowhere in iTunes where they could just type a URL and go. In addition, there are Parental control built into iTunes as well.
Thank you!
-
Original title: user account with an effort of parental control
After logging in to my admin account, I created two user accounts for my children, set up parental controls for both that I created, when I tried to set up the third account that he would allow me to activate parental control. It seems that he is trying to load the screen to give me the parental control options then the window disappers and another small window appears saying "cannot make changes to parental controls settings. If the problem persists, see your system administrator. I close the window, and then open the parental controls for other accounts, and they work very well, allows me the chance to change. I deleted the third account several times, making sure to create on behalf of others, just like I did the first two. Still no luck. Can I have only 3 total accounts? My administrator account and standard users 2.
How can I get a standard user account third with parental controls?
Hello
Create a new user account and check if the problem persists, the problem does not persist in the new user account, then fix the damaged user account.
Create a user account (Windows Vista)
Screw a damaged profile (Windows Vista)
Check out the link below to check if the parental control is correctly defined
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls-activity-reports
Hope this information helps.
-
Which program to choose "Ask administrator for permission" on the Parental control
I am the administrator and I have parental controls installed on user accounts for my children. When they fall on a blocked Web site, one of the options is "Ask an administrator for permission." When they click on this link, a dialogue, a box pops up saying "this link must be opened with an application" and asked them to browse and choose an application. What application they should choose? Now they must remember Web site, sign out of their account, have log in as administrator, add it to the approved list on parental controls, while I log out and they can log on and access the Web site. It's crazy, especially doing reports of schools who may need to use things like sites of weapons that would be otherwise blocked.
http://www.bleepingcomputer.com/tutorials/tutorial139.html
Read the tutorial above on the Parental control.
It's the best Info for it on the Net.
It describes all the different functions.
See you soon.
Mick Murphy - Microsoft partner
-
Export logs events to another host
Hello
I'm looking to export-> Firesight events connection to another host.
What would be the best way to do this? I can't find any clear option in the GUI to export information.
This information is in mysql or it is in a text file in the clear on the Sourcefirehost which can be copied to another host?
Or if we can configure the Sourcefire to send syslog for each event of connection to another host to syslog?
We want to save the information for 3months + but unfortunately atm journal is about 24 hours.
Kind regards
Jacob
Hi Jacob, access control strategy has logging option, so if a traffic hit a particular rule in which logging is enabled and it is also set to send logs to Syslog.
You will be able to see all kinds of traffic from users on the Syslog, exploit the or normal traffic,
Mark it as correct if she helped to resolve your query.
Thank you
Ankita
Maybe you are looking for
-
Crasches Firefox and Thunderbird after reinstall
Today first Thunderbird crasched and after that, it was impossible to start Firefox or Thunderbird.I removed all the programs from the PC (W7 64 bit) Mozilla and reinstalled a fresh installation. Both programs still crasches at startup.
-
Qosmio F60: No keyboard and joystick game Super Street Fighter 4
When I install a Super Street Fighter 4 Arcade Edition want my keyboard works not at all and I really need some help with that... and it did not work with joystick too Help, pleaseThanks in advance
-
How to change the CSV in dat file
Hello I want you ask about the data I've had. In fact, data from csv file. So, can I change directly file dat? Just put c:\Trace.dat? may or may not? Need your help. Thank you.
-
When I download an of say 10 MB mp4 file, download file watch only say 6 Mo sometimes, why the full file is not registered?This problem occurs only in a few cases 5 percent if I d/l new and get the complete file
-
my computer told me several times this update for windows xp that kb248119 could not be updated
My computer tells me that this update of security for windows xp that kb248119 has failed. What should I do?