Control storage enable IO

Similar Questions

• Control storage IO - error

  Hello community,

  I shout a big hello to the community .

  She is my little mistake:

  I want to activate control of e/s of storage on my ESXi 5.1 (managed by vSphere 5.5 web client), data store is a CX4-120 (last flare).

  But there is an error message that I works ESXi 4.1?

  "" CX4-120' is connected at least a host prior to version 4.1, the data store does not support storage I / O Control. "

  Germany:

  "Der Datenspeicher" CX4-120' ist mit einem host vor Version 4.1 at least clear, control storage I/O would nicht der. "

  Someone has an idea?

  The two hosts 5.1 ESXi is a full installation (3 days ago), the VMs has been written off on ESX 3.5 hosts and registered in the new cluster (updated vmware + vmhardwar).

  Thanks for help.

  Hi Daniel,.

  Have you checked the license on your hosts? The correct licences are applied?

  Although SIOC require a business license, sometimes, the UI makes a mistake and makes the visible option. Once you enable it, the license is activated and you may receive this error.

  Hope this helps

  Frank Denneman

  https://Twitter.com/frankdenneman

• Find the storage - enabled i/o control?

  I know just enough to be dangerous in PowerCLI. Can someone tell me if there is a simple script, I can run to check all my stores of data to see if the IGCS is enabled or not? Just a simple enabled is everything I'm looking for. I suspect that some of our data warehouses have not been configured for IGCS. We have a ton of data warehouses and I don't want to check each manually.

  Thank you

  $formatenumerationlimit =-1

  $spec = get-view - viewtype datastore

  $spec | Select Name, @{N = "Enabled SIOC?"; E = {$spec. {{IORMConfiguration.Enabled [0]}}

  It reduced down to a one-liner:

  Notice-EEG - ViewType datastore. Select Name, @{N = "Active SIOC?"; E={$_. IORMConfiguration.Enabled}}

• NOTHING will work when parental controls are enabled for the childs user account

  Won't launch any program on any user account that has parental controls enabled (via admin = ME)! IE, itunes, has even had a few background apps prevented such as COM Surgate, SMBus and a framework any not load. ALL these loading without probs when parental control is not activated (off) and all these programs work in the State of admin as well.

  Scratchin my head here

  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Go to the tutorial above on this and see if you missed a step in putting in place.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot remove SAN inactive datastore (control enabled storage IO)

  Hello

  I had a few SAN Datastore mounted on Vsphere ESXi 4.1 and we moved all the VMDK to the local data store to recreate a single data store. I forgot to remove Datastore before washing on SAN volumes, so they appear as "inactive". Cannot delete volumes because it shows error below

  call 'HostDataStoreSystem.RemoveDatastore' of object "datastoreSystem-104"on vCenter Server "xxxx" failed."

  Cannot remove datastore "XX_Vol1" because store I / 0 control is enabled on this subject. " Correct it and try the operation again.

  I know the storage i/o control is activated. I looked at the VMware KB which runs e/s storage disabled control to remove the volume. "When I tried to uncheck control IO, I another error 'datastore' isn't accessible.

  So I kind of know how I can disable the storage i/o control in order to remove inactive datastore.

  Would appreciate any help.

  Mo.

  check this: http://communities.vmware.com/thread/300953

• Problem: Delete inactive datastore with storage i/o Control active - catch-22

  Hi all

  I'm trying, and failing, to get rid of a data store inactive.  Attempts to remove it fail with the message "Cannot delete datastore '[DatastoreName]' because of storage i/o control is enabled on this subject."  Attempts to disable SIOC on the data store fail with the message ' Datastore ' ' is not available. "  Any suggestions to help me kill this zombie data store would be greatly appreciated.  Thank you!

  restart did the trick.

  Stop, think, restart

• Why I can not connect on the accounts of Firefox to put in place the synchronization? FF30 + keeps telling me how please enable cookies; cookies ARE enabled, already tried Safe Mode.

  Exactly what it says on the Tin.

  Why can't I connect to Firefox accounts to set up sync to my laptop? FF30 + keeps telling me how please enable cookies; cookies ARE enabled, and I already tried Safe Mode. This has happened since the new Sync has been set up, so I think that nearly 30 FF. I'm now up to 34 FF version and it still does not work. I was not able to sync from the "update".

  Problem #1: Going to about: accounts and clicking the Get Started button Blue opens a blank screen. It's not even a prompt on the cookies. It's just empty. Screen attached.
  It comes from before the modules are disabled. If they are disabled in Mode safe, we go to the #2 problem.

  #2 problem: I've skimmed a thread (https://github.com/mozilla/fxa-content-server/issues/1017) and I tried connecting to sync through accounts.mozilla.com instead, but if the screen does not turn white while the modules are always enabled, "Enable cookies" warning are as far as I can get. Go to about: accounts in Mode safe mode gives the same result. I deleted all my cookies and my cache, FF restarted several times with and without active modules and still nothing. I browsed this forum of support for similar issues, and while other people have the same problem, no other threads have been solved yet. Several later versions of FF, it is far too long for this question still unresolved... Screen attached.

  I know where the Firefox Cookie Manager, and I have enabled all settings. I was even able to third party cookies (even though I shouldn't really because they are unnecessary). No difference. Screen attached.

  I looked into: config and looked up the word 'cookie' in names, but even this is useless to me since I am not a programmer and so ignorant of what mean really all of these parameters. Screen attached.

  I'm at the end of my rope here, guys. It has been for months. A year. Maybe more than a year. I don't even remember. I just got a new camera and I don't want to add all my Firefox information one by one. It doesn't seem to be a way to contact Mozilla directly, so... Someone help please...

  Ensure that you allow cookies for the domain of the accounts.firefox.com if you are not allowing cookies generally or use the cookie setting 'Ask Me '.

  You can check whether DOM Storage is enabled.

  • http://KB.mozillazine.org/DOM.storage.enabled

• Google said Ad cookies settings are disabled, but cookies are enabled

  Whenever I try to change the settings of ads on google, it tells that cookies are disabled, but cookies are enabled and google.com and google.co.uk are referenced in the cookie exceptions to allow.

  I tried to disable addons like adblock and ghostery, I tried to turn off the TSDS, the help page does not work because it only covers chrome/chromium and I tried google ask and they directed me here.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check whether DOM Storage is enabled.

  • http://KB.mozillazine.org/DOM.storage.enabled
  • http://KB.mozillazine.org/about:config

• Switch control Boolean to false automatically after a set time

  I'm trying to control when I register given by the presence of the user press a Boolean control on the front panel. I want the data to be saved for only 3 seconds and having the Boolean control automatically enabled to false so that the data will stop recording and control changes on the front but does not prevent the execution of the VI. The reason is that I want to have the user to create a settings file for a laser used outside of labview where entered the user through digital controls the current settings of laser and a wavelength of laser meter reading is found measured and saved in labview. So after that the data records for 3 seconds the user would input new parameters for the laser and then save the new configuration of the meter wavelength and repeat this operation several times.

  I tried a case hang as seen in the attached VI and you have also tried a state machine with control of ENUM. I can't get this thing to work. Any help would be appreciated.

  Thank you

  Hello

  Easier implementation is to have a state machine. You would have a State to collect data for a specific timer and another State to exit the VI.

• How can I activate the appearance of the information bar for the purpose of the installation of the ActiveX controls?

  Windows XP SP3 32-Bit Kaspersky Pure 2.0, IE8. I try to run Windows Update or Microsoft. The "check for Updates" returns very briefly and I get the message that I need to install the ActiveX control to run the update. I see clear instructions right click of the 'information bar' and follow the instructions.

  My problem is I do not have the information bar and have spent hours trying to allow him or have it Update ActiveX to recognize appear to be installed. Thank you.

  Internet Explorer 8 information bar: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-GB/help/a7a14db1-f0ce-40b0-a8ee-3c2df2ffd8121033.mspx

  Check your settings to make sure that it is not off.

  • Open Internet Explorer by clicking on the button start , and then click Internet Explorer.

  • Click Tools and then click Internet Options.

  • Click the Security tab and then click Custom level.

    • Do one or two of the following ways:

    • To disable the InfoBar for ActiveX controls, scroll to the section ActiveX controls and plug-ins from the list and then, under prompting for ActiveX controls, click Enable.

  • To disable the InfoBar for downloads, scroll to the section of downloads from the list and then, under prompting for file downloads, click Enable.

  • Click OK, click Yes to confirm that you want to change, and then click OK again.

  If your settings are set as above, then the information bar stops.

• Access to the path 'C:\Users\User-2\AppData\Roaming\Hewlett-Packard\HPAdvisor\HPAdvisor.MainFrame.Controls.DockPopup.Main.xml' is denied.

  Someone at - it an idea of this error message: [access to the path 'C:\Users\User-2\AppData\Roaming\Hewlett-Packard\HPAdvisor\HPAdvisor.MainFrame.Controls.DockPopup.Main.xml' is denied.]

  This happens only if I "User Account Control" is enabled in the administrator account.

  Hi GA,.

  Is the default Administrator account or an account that you created?

  Method 1:

  You can try creating another account with admin rights and see if that solves it.

  Create a user account

  If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  Method 2:

  Also, if this problem just started, then try to perform a system restore, and check.

  You can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

• How to check link flow control works on EqualLogic?

  I recently had to disable DCB on different switches did not fully support DCB.  Now I want to ensure that EqualLogic Arrays use correctly the link flow control.  I remember a message in the event log earlier who said that flow control is enabled on all interfaces, but I wonder if there is an easier way and makes it more definitive to me to check if flow control is enabled and working on the EqualLogic arrays.  The firmware version is 7.0.9.  I have enabled in the EqualLogic group DCB (as recommended by Dell) and disabled on Ethernet switches.  Thank you.

  Hello

  You need to check the switches, they should show it is activated or not.   EQL paintings will never SEND a pause frame to the switch, it will however, respond to the flowcontrol if make him recover from the switch.

  Note: Not all switches support send flowcontrol.

  Kind regards

• How can I restrict permissions to users selected features like control panel, run, format and other administrative functions?

  Windows 7 Pro, how can I restrict permissions to users selected to features such as Control Panel, run, format and other administrative functions?

  Hello

  You should be able to control it for all users, users or groups or all users
  except the administrator.

  Settings for group policy to control panel
  http://TechNet.Microsoft.com/en-us/library/ee617167 (WS.10) .aspx

  Policy settings for display in the Panel group
  http://TechNet.Microsoft.com/en-us/library/ee617168 (WS.10) .aspx

  How to enable or disable the control panel in Vista and Windows 7 - see two Option
  http://www.Vistax64.com/tutorials/121043-Control-Panel-enable-disable.html

  How to hide or display a Control Panel icon in Vista and Windows 7 - see an Option
  http://www.Vistax64.com/tutorials/120937-Control-Panel-hide-icon.html

  How to disable the control panel in Windows 7
  http://www.howtogeek.com/HOWTO/16189/configure-what-items-are-available-in-Control-Panel-or-completely-disable-it-in-Windows-7/

  Enable/disable the Windows 7 control panel access
  http://www.AddictiveTips.com/Windows-tips/disable-enable-access-to-Windows-7-Control-Panel/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that no such interface supported.

  I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that: {26EE0668-A00A-44D7-9371-BEB064C98683} not this interface supported...

  Hi MAMARDA,

  Welcome to the Microsoft Vista answers Forum!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Windows 7 use you?

  (b) what is the exact error message you are getting?

  Method 1: You can also try to perform a file system (scan SFC) verification tool. This tool will fix the system files are corrupted.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  Method 2: If this is a recent problem that has developed you can try to perform a system restore and check if it works very well.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Method 3: you can try to start safe mode and restore the system, if you are unable to do it in normal mode.

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  When you are in safe mode, follow the steps mentioned above to complete the restore of the system.

  Hope the helps of information.
  Please post back and we do know.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• VB 6 application on Windows 7 64 bit turns black instead of white when active control

  Our VB 6 application shows a simple form with a few text controls and radio buttons.  Text controls is by default disabled (gray), but when the user changes an option button, the control is enabled if the user can enter some data into it.  On a Windows 7 64-bit workstation, the control becomes black instead of white when turned on, then the user is unable to see what they type into it.  Y at - it any resolution to this problem?  The form works very well with Windows XP and also works very well on a Windows 2008 R2 64-bit server.

  Hi Mark,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Microsoft Developer Network. Please post your question in this Forum. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  For reference:

  http://msdn.Microsoft.com/en-us/library/kehz1dz1 (v = vs. 80) .aspx

  Hope the above information is helpful.