How to check link flow control works on EqualLogic?

Similar Questions

• How far is the flow of work & GUI in 10 pre pre 8?

  In fact, I'm not sure that I ask in the right place - is equivalent to "Discussion" "Forum"? It's been a while since I've posted in the forum and things have changed a lot. I seem to be going round in circles. (You know you're in trouble when you know not even how to use the help forum :).

  My one question became two when I tried to use this forum.

  (1) how close is the flow of work & GUI in 10 pre pre 8? A PrE8 manual would be very helpful for PrE10? (Note: the latest version, I have worked with is pre 2 so I should know the basics.) I'm just learning where everything is now).

  (2) I would like to read all of the questions in the forum, but all I can see are securities under "a trend of issues." Is it the way it is now? I would like to extend the question list so I can read the first few sentences - is there a way to do? I used to learn a lot by reading the forums, but only titles are not very useful.

  First of all, you're in the right place - Discussions are the Forum. Now, if you do not see the wires themselves, you're probably in the preview mode. Just click on one of those and if playback, search the debates of the elements of the first and click on this hyperlink. You should then see all the threads of Discussion.

  Regarding countries 8 vs pre 10, they'll be close enough. Although there are a few changes with pre 10 (for most things like more project Presets, etc), the general course will be almost identical. Some operations may take their "button" in a slightly different place and with a little, the syntax might have changed. In general, things pretty much always works the same way. All the main concepts NLE (of Non-linear editing) will always be applied.

  Today, Steve Grisetti, our tireless MOD here, has a book of pre 10 updated through Muvipix.com, and it has been updated for the new program, pre 10, so what it will cover what changes little there.

  Good luck

  Hunt

• How to check if BI Scheduler works or not?

  How to check if BI Scheduler works or not?

  How to check if BI Scheduler works or not?

  Check the log file

  tail-f /OracleBI/server/Log/*NQScheduler.log*

• How to check if the indexer works?

  The problem I have is that it generates a lot of disk activity.  If I do works that are heavy on the use of the disc, it becomes almost impossible to work.

  Is it possible to control when the indexer runs in the background?  I can work in two ways.

  1. If a process of a given name is in CPU, run no indexer

  2 in some window of time, don't throw an indexer (indexer or limited only to run in a window of time)

  Thank you

  Hello

  Thank you for your response.

  You can always return to your default configuration by disabling the additional folder that you added to the indexed location (-> Panel-> option change indexing) and rebuild the index (Control Panel-> option-> Advanced Indexing - > rebuild). Indexing of the entire system can lead to search huge index of data which may result from eating up your hard drive space and slow down your system.

  If the issue still persists I would say you are referring to the link below:

  See Mike Hall responded on 15 March 2012
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/does-Windows-search-indexing-really-slow-down-PC/1bd40e28-a1ef-486b-9246-867200139b81

  Hope this information helps and if you have other questions related to Windows do not hesitate to post on Microsoft Community, we will be happy to help you.

• How to check if the printer works.

  They gave me printet 720C en with empty cartridges. I connected the printer. But when I try to print nothing happens. Not at least the paper to go so I can see if the printer works? I do not like to spend money for the ink and then discover the printer does not work.

  VDV

  OK, some are progressing.  The Red blinking light may indicate a number of things, but printing will not happen in this case.  I would start by clean cartrdige contacts, as shown here.

  If that does not solve the problem then see the page here.

  There is not low on ink or another indicator for the Deskjet 720 that could prevent printing (or at least going through the motions) with a cartridge empty.  The printer does an electric test of cartridges before printing to that there are no problems might damage the printer control electronics.  The printer will also check and make sure that the cartridges are installed, this model cannot work without both cartridges.

• How to check loadbalancer is currently working?

  Hi all
  
  We have implemented as a result of our environment R12 loadbalancer Note: 380489.1 web unique entry point to.
  
  How can we ensure that the load is charge of distrubited between two nodes of AppsTier?
  
  How can we control loadbalancer work?
  
  Kind regards
  Tareq

  Please see these documents.

  Simultaneous treatment - how to ensure the load balancing of the competitor Manager process in the Configuration of CFP - RAC [ID 762024.1
  How to set up and test the failover of the CFP on no RAC environments. [743716.1 ID]

  Thank you
  Hussein

• How to check if my fan works?

  After 30 minutes, listening to a dvd, my satellite A100-768 becomes slow and the temperature of the processor (fan speed) is about 86 degrees... the fan does not start. If I blow in the extract system, DVD again. How can I check my fan?

  Hello

  Could you explain what you want to check the fan?
  If there is something wrong, the laptop must be open to check the hardware!
  But if you do yourself, you will lose the warranty.

  That's why I put t recommend opening the laptop or the removal of the covers!
  Contact the ASP and explain to him the situation with the cooling modules

• How to check if the deduplication works correctly

  Hi all
  I understand that deduplication securefile is for the same column. Suppose if I have 2 identical data in a column, say one, with the size of 4000 bytes, the deduplication makes stores only 4000 bytes instead of 8 000 bytes table. From sqlplus, how can I check if this particular column takes only space to 4000 bytes instead of 8000?
  
  Kind regards
  Val

  Valerie Debonair wrote:

  How can I check if this particular column takes only space to 4000 bytes instead of 8000?

  You can't exactly check without looking at the discharge of the LOB segment. It is easier to just check LOG segment does not increase when you insert the same LOB values:

  SQL> DROP TABLE T1
    2  /
  
  Table dropped.
  
  SQL> CREATE TABLE t1(
    2                  C CLOB
    3                 )
    4    LOB(C) STORE AS SECUREFILE
    5  /
  
  Table created.
  
  SQL> SELECT  SEGMENT_NAME
    2    FROM  USER_LOBS
    3    WHERE TABLE_NAME = 'T1'
    4      AND COLUMN_NAME = 'C'
    5  /
  
  SEGMENT_NAME
  ------------------------------
  SYS_LOB0000077372C00001$$
  
  SQL> INSERT
    2    INTO T1
    3    SELECT  LPAD('A',10000,'A')
    4      FROM  DUAL
    5  /
  
  1 row created.
  
  SQL> COMMIT
    2  /
  
  Commit complete.
  
  SQL> SELECT  BYTES
    2    FROM  USER_SEGMENTS
    3    WHERE SEGMENT_NAME = 'SYS_LOB0000077372C00001$$'
    4  /
  
       BYTES
  ----------
     1245184
  
  SQL> INSERT
    2    INTO T1
    3    SELECT  LPAD('A',10000,'A')
    4      FROM  DUAL
    5      CONNECT BY LEVEL <= 100
    6  /
  
  100 rows created.
  
  SQL> COMMIT
    2  /
  
  Commit complete.
  
  SQL> SELECT  BYTES
    2    FROM  USER_SEGMENTS
    3    WHERE SEGMENT_NAME = 'SYS_LOB0000077372C00001$$'
    4  /
  
       BYTES
  ----------
     2293760
  
  SQL> DROP TABLE T1
    2  /
  
  Table dropped.
  
  SQL> CREATE TABLE t1(
    2                  C CLOB
    3                 )
    4    LOB(C) STORE AS SECUREFILE(
    5                               DEDUPLICATE
    6                              )
    7  /
  
  Table created.
  
  SQL> SELECT  SEGMENT_NAME
    2    FROM  USER_LOBS
    3    WHERE TABLE_NAME = 'T1'
    4      AND COLUMN_NAME = 'C'
    5  /
  
  SEGMENT_NAME
  ------------------------------
  SYS_LOB0000077375C00001$$
  
  SQL> INSERT
    2    INTO T1
    3    SELECT  LPAD('A',10000,'A')
    4      FROM  DUAL
    5  /
  
  1 row created.
  
  SQL> COMMIT
    2  /
  
  Commit complete.
  
  SQL> SELECT  BYTES
    2    FROM  USER_SEGMENTS
    3    WHERE SEGMENT_NAME = 'SYS_LOB0000077375C00001$$'
    4  /
  
       BYTES
  ----------
     1179648
  
  SQL> INSERT
    2    INTO T1
    3    SELECT  LPAD('A',10000,'A')
    4      FROM  DUAL
    5      CONNECT BY LEVEL <= 100
    6  /
  
  100 rows created.
  
  SQL> COMMIT
    2  /
  
  Commit complete.
  
  SQL> SELECT  BYTES
    2    FROM  USER_SEGMENTS
    3    WHERE SEGMENT_NAME = 'SYS_LOB0000077375C00001$$'
    4  /
  
       BYTES
  ----------
     1179648
  
  SQL> 
  

  SY.

• How to check if standby db works

  Hi all

  EBS R12.2.4

  11 GR 2

  OL6.5

  My primary DB, I run:

  SQL > archive logs list;

  Database log mode Archive Mode

  Active AutoArchive

  Archive destination/home/ARCH

  Sequence of journal online oldest 7629

  Log sequence archive 7630

  Current log sequence 7630

  Then my db backup, I run:

  SQL > archive logs list;

  Database log mode Archive Mode

  Active AutoArchive

  Archive destination/home/ARCH

  Sequence of journal online oldest 7629

  Log sequence to archive 0

  Current log sequence 7630

  Is this enough the cheque?

  Does this mean that my watch doesn't work well?

  Kind regards

  JC

  What is your archivelog location and what is political deletion log archives?

  visit the archivelog deletion policy...

  https://docs.Oracle.com/CD/E18283_01/server.112/e17022/RMAN.htm

  You can define archive political deletion log and remove them based on that...

• How to check is that DG works well?

  Hi all

  31%

  AIX

  We have dataguard configured on our prod primary and physical standby database.

  My boss ask me to create a script for the tech email group every day at 08:00 the status of replication (apply logs).

  Since I am on dataguard broker. I'll do the script as follows:

  ===========================

  Oracle@prodsvr:/Home/Oracle > dgmgrl

  DGMGRL for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - 64 bit Production

  Copyright (c) 2000, 2009, Oracle. All rights reserved.

  Welcome to DGMGRL, type 'help' for more information.

  
  

  DGMGRL > Connect sys/Manager

  Connected.

  DGMGRL > see the configuration;

  Configuration - DGConfig1

  Protection mode: MaxPerformance

  Databases:

  PROD - primary

  PRODDR - physical of the standby database

  Fast-Start Failover: DISABLED

  The configuration status:

  SUCCESS

  DGMGRL > output

  =========================

  How to save the logs above or by e-mail? (I know how to send an email already) I just need the log file.

  Thank you

  MK

  Don't mean our expectation has no latency period?

  If apply lag is 0 seconds, then Yes!

  as in the update in real time?

  What is your definition as updated in real-time?

  Applies what real-time means it's that roll forward is applied as it is received.  The offset to be applied will not necessarily always be zero... depends on your mode of about.

  Protection of data protection modes

• iPod Classic stopped display work.  Work displayed in iTunes.  Updated iTunes to 12.4 but did not help.  I can see how to check

  iPod Classic stopped display work.  Work displayed in iTunes.  Updated iTunes to 12.4 but did not help.  I can see how to check and uncheck "Display work" in iTunes but not how on the iPod as others have suggested.  Need to perhaps restore and recharge.

  Long ago with including works on devices was optional, and you can sometimes fix cache work on a device by not including and then add it again. This choice has long since disappeared. A complete restoration and reloading is now the only method to recreate the cache.

  TT2

• How can I check if the hardware works correctly?

  How can I check if the hardware works correctly?... including fans, hard drive, cd players, etc...

  Hello

  I suggest you to generate system health report to check if the system is working properly. To run the system health report, follow the steps below.

  1. click on start

  2. go in Control Panel

  3 go to the Tools and performance information

  4 search for Advanced Tools in the left panel of the window.

  5 go to generate a system health report

  You can also check the material status of the devices in the Device Manager. Follow the link for more information on the Manager of devices below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

• My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly

  My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly

  You can try this download.   Etrecheck.   https://etrecheck.com/#about

  Then publish the report as a reply in this thread.

  It will allow us to review your system without disclosing a private matter.

• I found an old vista home basic dvd with a key, how can check whether key works but not install it?

  I found an old vista home basic dvd with a key, how can check whether key works, but not install it? some dvd install can be live boot from themselves too [password required for a direct start?]?

  Hello

  You must install it to see if it is legal to do so.

  There is no public database of product keys.

  See you soon.

• How to check the windows firewall has the stealth mode on and how he check actaully work

  I have windows 8.1 with all updated.

  Can someone tell me how to check the firewall windows has stealth mode?

  Also, can someone tell me how I could actually check that, if it is then how can I check that it actually works against someone trying to find open ports to exploit?

  Rich

  Go to GRC.com here https://www.grc.com/lt/leaktest.htm

  Read how to use it here https://www.grc.com/lt/howtouse.htm

  Run the LeakTest