Control the Append KM, Group by clause

Similar Questions

• ORA-00907: lack the right parenthesis when using Group by clause with xmlagg

  I have the following query and I am getting ORA-00907 error when I use the clause with the xmlagg function group.

  select xmlelement("Mitigation",
                  xmlelement("m_szMethodName",tm.DisplayName),
                  xmlelement("SubstanceInterferenceProtocolList",
                              (select xmlagg(xmlelement("MitigationProtocol",
                                      xmlelement("m_szMethodName",tm.DisplayName),
                                      xmlelement("m_szInterferenceProtocolName",tmp.protocol_name),
                                      xmlelement("m_szInterferenceSubstance",tmp.intf_mtrl_prod_code),
                                      xmlelement("m_ProtocolParameters",
                                          xmlelement("m_szProtocolName",tmp.protocol_name),
                                              xmlelement("m_Consumables",
                                                  xmlelement("Consumable",
                                                      xmlelement("m_szConsumId", xrl.rgnt_pack_name),
                                                      xmlelement("m_szProductCode",xrl.pack_prod_code),
                                                      xmlelement("m_nVolume",tmp.fluid_vol),
                                                      xmlelement("m_szProtocolStep",xps.protocol_step_name))),
                                                  xmlelement("m_ProtParamList",
                                                      xmlagg(
                                                      xmlelement("ParameterValues",
                                                          xmlelement("m_szProtocolName",tmp.protocol_name),
                                                          xmlelement("m_Time",xpsd.parameter_ntime_value))
                                                      group by tmp.ccd_test_id,tmp.intf_mtrl_prod_code)
                  )))
                  order by tmp.ccd_test_id, tmp.intf_mtrl_prod_code, xps.protocol_step_intprotocolstep )
                  from XPR_tdef_mitigation_protocol tmp, xp_reagentlist xrl,
                  xpr_protocol_settings xps, xpr_protocol_settings_default xpsd
                  where tmp.ccd_test_id = tm.ccd_test_id
                  and tmp.ccd_test_id = xrl.ccd_test_id
                  and tmp.pack_prod_code = xrl.pack_prod_code
                  and tmp.intf_type = 1
                  and xps.protocol_name = xpsd.protocol_name
                  and xps.protocol_step_name = xpsd.protocol_step_name
                  and xps.ps_action_parameterlist = xpsd.ps_action_parameterlist
                  and xps.protocol_name =  tmp.PROTOCOL_NAME
                  )))
  from XPtoXPRTdef_defn_mapping tm
  where tm.DisplayName = 'SYPH'

  If I remove the clause xmlagg and the group by clause, the query works well and not give me the result.
  But in this code XML, the output format is incorrect for my application.
  
  Could someone help out here?

  Now my problem is that this unique coating is more than 32767 characters and utl_file can write 32767 bytes per line.
  Someone deal with this?

  Serialize the output as CLOB and DBMS_XSLPROCESSOR.clob2file procedure used to write to a file:

  DECLARE
    xml_output CLOB;
  BEGIN
    SELECT XMLElement("Department",
             XMLAgg(
               XMLElement("Employee",e.job_id||' '||e.last_name)
               ORDER BY e.last_name
             )
           ).getClobVal() AS "Dept_list"
    INTO xml_output
    FROM hr.employees e
    WHERE e.department_id = 30 OR e.department_id = 40;
  
    DBMS_XSLPROCESSOR.clob2file(xml_output, 'XML_DIR', 'test.xml');
  END;
  /
  

• Select the columns not in the group by clause

  Hello
  
  My version of DB is 10.0.2
  
  I have query, where in I need to select two columns more but that should not be part of the group by Clause.
  
  Does perform a work around?
  

  SELECT  F.custnum, 
    V.Import_date,
   -- F.ErledigtMM,F.ErledigtGrundMM, (Columns to be selected additionally)
    nvl(sum(nvl(round(V.VerAuf16/1000,2), 0)  +nvl(round(V.VerAuf17/1000,2), 0)  + nvl(round(V.VerAuf18/1000,2), 0)  + nvl(round(V.VerAuf19/1000,2), 0)  + nvl(round(V.VerAuf20/1000,2), 0)  + nvl(round(V.VerAufKAPUn/1000,2), 0)  + nvl(round(V.VerAufKAPVz/1000,2), 0) ), 0)  Mandantenforderung,
    nvl(sum(nvl(round(V.VerAuf4/1000,2), 0) ), 0) Inkassokosten,
    nvl(sum(nvl(round(V.VerAuf5/1000,2), 0) ), 0) KontoFuehrungsgebuehren,
    nvl(sum(nvl(round(V.VerAuf1/1000,2), 0)  + nvl(round(V.VerAuf2/1000,2), 0) ), 0)  Verwertungskosten,
    nvl(sum(nvl(round(V.VerAuf10/1000,2), 0)  + nvl(round(V.VerAuf8/1000,2), 0) + nvl(round(V.VerAuf9/1000,2), 0) ), 0)  Barauslagen,
    nvl(sum(nvl(round(V.VerAuf13/1000,2), 0)  + nvl(round(V.VerAuf14/1000,2), 0) + nvl(round(V.VerAuf15/1000,2), 0)  + nvl(round(V.VerAuf6/1000,2), 0) ),0)  Gerichtskosten,
    nvl(sum(nvl(round(V.VerAuf11/1000,2), 0)  + nvl(round(V.VerAuf12/1000,2), 0)  + nvl(round(V.VerAuf7/1000,2), 0) ), 0) RAKosten,
    TO_CHAR(F.Created_Date,'MM.YYYY') Created_Date_MM ,
    TO_CHAR(F.Created_Date,'YYYY') Created_Date_MMRRRR
  FROM FACM F, VA V 
     WHERE  F.custnum =  DECODE(0,0,F.custnum,0) AND
    F.accnum = V.accnum 
    GROUP BY F.custnum, V.Import_date,TO_CHAR(F.Created_Date,'MM.YYYY') ,TO_CHAR(F.Created_Date,'YYYY'))

  Hello

  Here's what I suggest:

  select
  a.custnum,
  a.import_date,
  b.ErledigtMM,
  b.ErledigtGrundMM,
  a.Mandantenforderung,
  a.Inkassokosten,
  a.KontoFuehrungsgebuehren,
  a.Verwertungskosten,
  a.Barauslagen,
  a.Gerichtskosten,
  a.RAKosten,
  a.Created_Date_MM ,
  a.Created_Date_MMRRRR
  from (
  SELECT  F.custnum,
    V.Import_date,
    nvl(sum(nvl(round(V.VerAuf16/1000,2), 0)  +nvl(round(V.VerAuf17/1000,2), 0)  + nvl(round(V.VerAuf18/1000,2), 0)  + nvl(round(V.VerAuf19/1000,2), 0)  + nvl(round(V.VerAuf20/1000,2), 0)  + nvl(round(V.VerAufKAPUn/1000,2), 0)  + nvl(round(V.VerAufKAPVz/1000,2), 0) ), 0)  Mandantenforderung,
    nvl(sum(nvl(round(V.VerAuf4/1000,2), 0) ), 0) Inkassokosten,
    nvl(sum(nvl(round(V.VerAuf5/1000,2), 0) ), 0) KontoFuehrungsgebuehren,
    nvl(sum(nvl(round(V.VerAuf1/1000,2), 0)  + nvl(round(V.VerAuf2/1000,2), 0) ), 0)  Verwertungskosten,
    nvl(sum(nvl(round(V.VerAuf10/1000,2), 0)  + nvl(round(V.VerAuf8/1000,2), 0) + nvl(round(V.VerAuf9/1000,2), 0) ), 0)  Barauslagen,
    nvl(sum(nvl(round(V.VerAuf13/1000,2), 0)  + nvl(round(V.VerAuf14/1000,2), 0) + nvl(round(V.VerAuf15/1000,2), 0)  + nvl(round(V.VerAuf6/1000,2), 0) ),0)  Gerichtskosten,
    nvl(sum(nvl(round(V.VerAuf11/1000,2), 0)  + nvl(round(V.VerAuf12/1000,2), 0)  + nvl(round(V.VerAuf7/1000,2), 0) ), 0) RAKosten,
    TO_CHAR(F.Created_Date,'MM.YYYY') Created_Date_MM ,
    TO_CHAR(F.Created_Date,'YYYY') Created_Date_MMRRRR
  FROM FACM F, VA V
     WHERE  F.custnum =  DECODE(0,0,F.custnum,0) AND
    F.accnum = V.accnum
    GROUP BY F.custnum, V.Import_date,TO_CHAR(F.Created_Date,'MM.YYYY') ,TO_CHAR(F.Created_Date,'YYYY'))
  ) a,
  FACM b
  where b.custnum = a.custnum 
  

  By the way

  WHERE  F.custnum =  DECODE(0,0,F.custnum,0) AND F.accnum = V.accnum
  

  can be translated into

  WHERE F.accnum = V.accnum
  

  because

  F.custnum =  DECODE(0,0,F.custnum,0)
  

  is always true
  because

  DECODE(0,0,F.custnum,0)
  

  means

  if 0=0 then F.custnum else 0
  

• Understanding of the multiple GROUP BY clause column

  Hi all
  Suppose I have the HR schema example, what is the difference between these two codes?

  select department_id, job_id, count(*) from employees GROUP BY department_id, job_id ORDER BY 1,2;

  and

  select department_id, job_id, count(*) from employees GROUP BY job_id,department_id ORDER BY 1,2;

  I do not see the difference when I run these queries.
  
  Best regards
  Valerie

  Well, semantically there is no difference: the two queries are equivalent, they return the same result as the value of lines.

  The order of columns in a GROUP BY clause is unrelated to the result set of a query. You group by this "group of columns.

  And since you order two games using the exact same ORDER BY clause, the order in which Oracle returns the bag of lines is the same too in your case.

• CFQUERYPARAM tag does not work in the GROUP BY clause

  I get an error whenever I put a CFQUERYPARAM tag in a GROUP BY clause. I saw on another forum, someone had a similar problem with the ORDER BY clause
  
  Here's a sample of what might look like my code
  Select x, y, z of ABC
  Group of < cfqueryparam value = 'x' cfsqltype = "cf_sql_float" >
  
  Here is the error I get.
  
  Run database query error.
  [Macromedia] [Oracle JDBC Driver] [Oracle] ORA-00979: not a GROUP BY expression
  
  Any idea?

  Cachedwithin and cachedafter functions store the query results in the RAM of the server. This means that, even if it is cached, when you run it, you get the cached result instead of going to the database to run again. This increases the speed of course, but if the data is changed during the period of cover, you have accuracy problems.

  It creates no memory problems. In the administrator you book a certain amount of memory for the query cache. If you exceed this amount, the last request to shoot the first query on, or something like that.

  In regards to what you're trying to do on the binding of variables to your group by clause, this isn't what cfqueryparam has been designed for. It has been designed to
  where clauses (where it =
  or insert queries (insert in my values in the table (field) ())
  and things like that.

  You try to use it for anything other than what it was designed for, which explains why it does not work for you.

• Concatenation of data with the GROUP BY clause

  Hi again!
  
  Following my previous thread...
  Re: Need help with RANK() on data ZERO
  
  I tried to apply the GROUP BY clause instead of preforming my query with RANK() to manage records NULL... I have a scenario where I also need to concatenate data from several lines.
  
  CREATE TABLE T_EMP (NUMBER OF EMP_NO, NAME VARCHAR2 (20));
  INSERT INTO T_EMP VALUES (1001, 'MARK');
  INSERT INTO T_EMP VALUES (1002, 'DAVID');
  INSERT INTO T_EMP VALUES (1003, "SHAUN");
  INSERT INTO T_EMP VALUES (1004, "JILL");
  
  CREATE TABLE T_EMP_DEPT (NUMBER OF EMP_NO, DEPT_NO NUMBER);
  INSERT INTO T_EMP_DEPT VALUES (1001, 10);
  INSERT INTO T_EMP_DEPT VALUES (1001, 20);
  INSERT INTO T_EMP_DEPT VALUES (1002, 10);
  INSERT INTO T_EMP_DEPT VALUES (1002, 20);
  INSERT INTO T_EMP_DEPT VALUES (1002, 30);
  INSERT INTO T_EMP_DEPT VALUES (1003, 20);
  INSERT INTO T_EMP_DEPT VALUES (1003, 30);
  INSERT INTO T_EMP_DEPT VALUES (1004, 10);
  
  CREATE TABLE T_EMP_VISITS (NUMBER OF EMP_NO, DEPT_NO NUMBER, VISITED DATE);
  INSERT INTO T_EMP_VISITS VALUES (1001, 10, 1 JAN 2009');
  INSERT INTO T_EMP_VISITS VALUES (1002, 10, 1 JAN 2009');
  INSERT INTO T_EMP_VISITS VALUES (1002, 30, 11 APR 2009');
  INSERT INTO T_EMP_VISITS VALUES (1003, 20, 3 MAY 2009');
  INSERT INTO T_EMP_VISITS VALUES (1003, 30: 14 FEB 2009');
  COMMIT;
  
  I have a T_EMP master table that stores the name and number of the emp. Each emp is required to visit some departments. This mapping is stored in the T_EMP_DEPT table. An employee can visit one or more departments. T_EMP_VISITS table stores the dates where the employee visited the services required. I need to view the report which should show when an employee all completed visits, which is the maximum date when it finished to visit all departments. If he did not visit any of the report should display date max, otherwise NULL. I was able to do using GROUP BY such proposed by Salim, but how do I show a list separated by commas of the services required for an employee in the same query.
  
  SELECT
  EMP_NO,
  NAME,
  MAX (DEPT_NO) KEEP (DENSE_RANK LAST ORDER BY VISITED) MAX_DEPT_NO,.
  MAX (VISITED) KEEP (DENSE_RANK LAST ORDER PER VISIT) VISITS_COMP
  DE)
  SELECT
  T_EMP. EMP_NO,
  NAME,
  T_EMP_DEPT. DEPT_NO,
  VISITED
  OF T_EMP
  LEFT OUTER JOIN T_EMP_DEPT
  ON T_EMP. EMP_NO = T_EMP_DEPT. EMP_NO
  LEFT OUTER JOIN T_EMP_VISITS
  ON T_EMP_DEPT. EMP_NO = T_EMP_VISITS. EMP_NO
  AND T_EMP_DEPT. DEPT_NO = T_EMP_VISITS. DEPT_NO)
  GROUP EMP_NO, NAME;
  
  Output
  EMP_NO NAME MAX_DEPT_NO VISITS_COMP
  1001 MARK 20
  1002 DAVID 20
  1003 SHAUN 20 3 MAY 09
  JILL 1004
  
  Power required
  EMP_NO NAME REQ_DEPTS MAX_DEPT_NO VISITS_COMP
  1001 MARC 20 10.20
  1002 DAVID 10,20,30 20
  1003 SHAUN 20,30 20 3 MAY 09
  JILL 10 1004
  
  Can we do this in a single query?

  Hello

  user512647 wrote:
  ... Sanjay
  The query you provided that stragg() use seems to work but my requirement is not in the result set. I don't know how to use stragg with
  MAX (DEPT_NO) KEEP (DENSE_RANK LAST ORDER BY VISITED) MAX_DEPT_NO,.
  MAX (VISITED) KEEP (DENSE_RANK LAST ORDER PER VISIT) VISITS_COMP
  I need more, these two columns these gives me the date when they have completed all visits. If they missed any Department then the result must be NULL in the VISITS_COMP field.

  Just add them to the SELECT clause:

  SELECT    t_emp.emp_no,
         name,
         STRAGG (t_emp_dept.dept_no)     AS deptno,
         MAX (t_emp_dept.dept_no) KEEP (DENSE_RANK LAST ORDER BY visited)
                                    AS max_dept_no,
         MAX (visited)                      AS visits_comp
  FROM             t_emp
  LEFT OUTER JOIN      t_emp_dept     ON   t_emp.emp_no     = t_emp_dept.emp_no
  LEFT OUTER JOIN      t_emp_visits     ON   t_emp_dept.emp_no     = t_emp_visits.emp_no
                               AND  t_emp_dept.dept_no = t_emp_visits.dept_no
  GROUP BY  t_emp.emp_no
  ,            name
  ;
  

  The column called visit_comp is simply the last visited, regardless of how the employee visited departments.
  If you want to have the NULL value if the employee has not yet visited all 3 departments:

  ...       CASE
            WHEN  COUNT (DISTINCT t_emp_dept.dept_no) = 3
            THEN  MAX (visited)
         END                    AS visits_comp
  

  The 'magic number' 3 is the total number of departments.
  If you want to understand the correct value of that at the time of the execution of the query, replace the code literal 3 hard with a scalar subquery.

  Note that 'KEEP MAX (x) (DENSE_RANK OVER LAST SERVICE BY x)' (where the exact same column is used as an argument and that the ORDER BY column) is just "MAX (x)".

• A question about the analytical function used with the GROUP BY clause in SHORT

  Hi all
  
  I created the following table named myenterprise
  

  CITY       STOREID    MONTH_NAME TOTAL_SALES            
  ---------- ---------- ---------- ---------------------- 
  paris      id1        January    1000                   
  paris      id1        March      7000                   
  paris      id1        April      2000                   
  paris      id2        November   2000                   
  paris      id3        January    5000                   
  london     id4        Janaury    3000                   
  london     id4        August     6000                   
  london     id5        September  500                    
  london     id5        November   1000

  If I want to find which is the total sales by city? I'll run the following query

  SELECT city, SUM(total_sales) AS TOTAL_SALES_PER_CITY
  FROM myenterprise
  GROUP BY city
  ORDER BY city, TOTAL_SALES_PER_CITY;

  that works very well and produces the expected result, i.e.

  CITY       TOTAL_SALES_PER_CITY   
  ---------- ---------------------- 
  london     10500                  
  paris      17000            

  Now in one of my books SQL (Mastering Oracle SQL) I found another method by using the SUM, but this time as an analytic function. Here's what the method of the book suggests as an alternative to the problem:

  SELECT city, 
         SUM(SUM(total_sales)) OVER (PARTITION BY city) AS TOTAL_SALES_PER_CITY
  FROM myenterprise
  GROUP BY city
  ORDER BY city, TOTAL_SALES_PER_CITY;

  I know that the analytic functions are executed after the GROUP BY clause has been transformed completely and Unlike regular aggregate functions, they return their result for each line belonging to the partitions specified in the partition clause (if there is a defined partition clause).
  
  Now my problem is that I do not understand what we have to use two functions SUM? If we only use one only, i.e.

  SELECT city, 
         SUM(total_sales) OVER (PARTITION BY city) AS TOTAL_SALES_PER_CITY
  FROM myenterprise
  GROUP BY city
  ORDER BY city, TOTAL_SALES_PER_CITY;

  This generates the following error:

  Error starting at line 2 in command:
  SELECT city, 
         SUM(total_sales) OVER (PARTITION BY city) AS TOTAL_SALES_PER_CITY
  FROM myenterprise
  GROUP BY city
  ORDER BY city, TOTAL_SALES_PER_CITY
  Error at Command Line:2 Column:11
  Error report:
  SQL Error: ORA-00979: not a GROUP BY expression
  00979. 00000 -  "not a GROUP BY expression"
  *Cause:    
  *Action:

  The error is generated for the line 2 column 11 which is, for the expression SUM (total_sales), well it's true that total_sales does not appear in the GROUP BY clause, but this should not be a problem, it has been used in an analytical function, so it is evaluated after the GROUP BY clause.
  
  So here's my question:
  
  Why use SUM (SUM (total_sales)) instead of SUM (total_sales)?
  
  
  Thanks in advance!
  :)
  
  
  
  
  
  In case you are interested, that's my definition of the table:

  DROP TABLE myenterprise;
  CREATE TABLE myenterprise(
  city VARCHAR2(10), 
  storeid VARCHAR2(10),
  month_name VARCHAR2(10),
  total_sales NUMBER);
  
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('paris', 'id1', 'January', 1000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('paris', 'id1', 'March', 7000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('paris', 'id1', 'April', 2000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('paris', 'id2', 'November', 2000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('paris', 'id3', 'January', 5000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('london', 'id4', 'Janaury', 3000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('london', 'id4', 'August', 6000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('london', 'id5', 'September', 500);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('london', 'id5', 'November', 1000);

  Edited by: dariyoosh on April 9, 2009 04:51

  It is clear that thet Analytics is reduntant here...
  You can even use AVG or any analytic function...

  SQL> SELECT city,
    2         avg(SUM(total_sales)) OVER (PARTITION BY city) AS TOTAL_SALES_PER_CITY
    3  FROM myenterprise
    4  GROUP BY city
    5  ORDER BY city, TOTAL_SALES_PER_CITY;
  
  CITY       TOTAL_SALES_PER_CITY
  ---------- --------------------
  london                    10500
  paris                     17000
  

• By the way where and group by clause Cursor

  I'm working on a procedure that generates a where clause clause and needs of a group by clause to return the correct results. I'm moving the two where and group variables in the cursor.
  
  The variables are is filled correctly, but when the cursor is created, variables are not in the cursor.
  
  Here's the code I'm working with. It is part of a package, but does no appeal to other parts of the package.
  
  PROCEDURE createFollowUpTask_Exposure (psUppgkedjetyp IN tis.tial.uppgkedjetyp%TYPE NULL by default,
  psAlarmtyp IN tis.tial.alarmtyp%TYPE by default NULL,
  psSubtyp IN tis.tial.subtyp%TYPE by default NULL,
  pnDays in NUMBER NULL by default,
  psKampkod IN tis.tiin.kampkod%TYPE by default NULL,
  psKatnr IN tis.tiin.katnr%TYPE by default NULL,
  psUtgava IN tis.tiin.utgava%TYPE by default NULL,
  psKatslag IN tis.tikg.katslag%TYPE by default NULL,
  psProdsyst IN tis.tikg.prodsyst%TYPE by default NULL,
  psUppgtyp IN tis.tiin.uppgtyp%TYPE by default NULL,
  psProdkod IN tis.tiin.prodkod%TYPE by default NULL,
  psStatus IN tis.tiin.status%TYPE by default NULL
  ) AS
  --
  cTIAL tis.tial%ROWTYPE;
  vLopnr tis.tial.lopnr%TYPE;
  vSqlWhere VARCHAR2 (4000);
  vGroupBy VARCHAR2 (1000): = "tiin.kampkod, tiin.abnr, tiko.fordsalj;
  cSelectCursor SYS_REFCURSOR;
  vSqlSelect VARCHAR2 (4000);
  psDays VARCHAR2 (50);
  cRec T_TIAL_REC;
  nCount number: = 0;
  
  --
  CURSOR cSqlSelect (SqlWhere IN VARCHAR2, GroupBy IN VARCHAR2) IS
  SELECT tiin.kampkod, tiin.abnr, tiko.fordsalj, MAX (tici.regdat) ALARMDATE
  OF tis.tiin
  JOIN tis.tiko ON tiin.kampkod = tiko.kampkod AND tiin.abnr = tiko.abnr
  JOIN core.tici ON tiin.kampkod = tici.kampkod AND tiin.abnr = tici.abnr AND tici.inplnr = tiin.inplnr
  WHERE 1 = 1 | SqlWhere
  GroupBy GROUP;
  --
  BEGIN
  -If these parameters are null, trigger the error
  IF psUppgkedjetyp IS NULL and psSubtyp IS NULL THEN
  raise_application_error (-20001,
  "String from the event or events must be assigned");
  END IF;
  -Fill the TIAL values
  IF psUppgkedjetyp IS NOT NULL THEN
  cTIAL.Uppgkedjetyp: = psUppgkedjetyp;
  END IF;
  --
  IF psAlarmtyp IS NOT NULL THEN
  cTIAL.Alarmtyp: = psAlarmtyp;
  END IF;
  --
  cTIAL.Handklass: = 't';
  cTIAL.Blobid: = 0;
  --
  IF pnDays IS NOT NULL THEN
  psDays: = '+' | pnDays;
  END IF;
  IF psSubtyp IS NOT NULL THEN
  cTIAL.Subtyp: = psSubtyp;
  END IF;
  -Create Where clause for cursor
  vSqlWhere: = ";
  IF psKampkod IS NOT NULL THEN
  vSqlWhere: = vSqlWhere | "AND tiin.kampkod ="' | psKampkod | " ' ;
  END IF;
  --
  IF psKatnr IS NOT NULL THEN
  vSqlWhere: = vSqlWhere | "AND tiin.katnr ="' | psKatnr | " ' ;
  END IF;
  --
  IF psUtgava IS NOT NULL THEN
  vSqlWhere: = vSqlWhere | "AND tiin.utgava ="' | psUtgava | " ' ;
  END IF;
  --
  IF psKatslag IS NOT NULL THEN
  vSqlWhere: = vSqlWhere | "AND tikg.katslag ="' | psKatslag | " ' ;
  END IF;
  --
  IF psProdsyst IS NOT NULL THEN
  vSqlWhere: = vSqlWhere | "AND tikg.prodsyst ="' | psProdsyst | " ' ;
  END IF;
  --
  IF psUppgtyp IS NOT NULL THEN
  vSqlWhere: = vSqlWhere | "AND tiin.uppgtyp ="' | psUppgtyp | " ' ;
  END IF;
  --
  IF psProdkod IS NOT NULL THEN
  vSqlWhere: = vSqlWhere | "AND tiin.prodkod ="' | psProdkod | " ' ;
  END IF;
  --
  IF psStatus IS NOT NULL THEN
  vSqlWhere: = vSqlWhere | "AND tiin.status ="' | psStatus | " ' ;
  END IF;
  -Browse all records in input parameters of the meeting and set values required TIAL.
  I'm IN cSqlSelect (vSqlWhere, vGroupBy)
  --
  LOOP
  -EXTRACT cSelectCursor INTO cRec;
  cTIAL.Kampkod: = ";
  cTIAL.Abnr: = ";
  cTIAL.Sign: = ";
  cTIAL.Alarmdate: = ";
  cTIAL.Kampkod: = i.Kampkod;
  cTIAL.Abnr: = i.Abnr;
  cTIAL.Sign: = i.fordsalj;
  cTIAL.Alarmdate: = i.alarmdate;
  --
  nCount: = nCount + 1;
  --
  IF vLopnr = - 1 THEN
  raise_application_error (-20002,
  "Error creating task for: ' | '. cTIAL.Kampkod |' '|| cTIAL.Abnr |' Sales representative: ' | cTIAL.Alarmdate);
  END IF;
  END LOOP;
  DBMS_OUTPUT. Put_line (' I created ' | nCount |) "documents.");
  
  
  
  END createFollowUpTask_Exposure;
  
  Thanks in advance for any help.

  Hello

  Welcome to the forum!

  Try this (untested) example:

  PROCEDURE createFollowUpTask_Exposure(psUppgkedjetyp IN tis.tial.uppgkedjetyp%TYPE DEFAULT NULL,
                                        psAlarmtyp     IN tis.tial.alarmtyp%TYPE DEFAULT NULL,
                                        psSubtyp       IN tis.tial.subtyp%TYPE DEFAULT NULL,
                                        pnDays         IN NUMBER DEFAULT NULL,
                                        psKampkod      IN tis.tiin.kampkod%TYPE DEFAULT NULL,
                                        psKatnr        IN tis.tiin.katnr%TYPE DEFAULT NULL,
                                        psUtgava       IN tis.tiin.utgava%TYPE DEFAULT NULL,
                                        psKatslag      IN tis.tikg.katslag%TYPE DEFAULT NULL,
                                        psProdsyst     IN tis.tikg.prodsyst%TYPE DEFAULT NULL,
                                        psUppgtyp      IN tis.tiin.uppgtyp%TYPE DEFAULT NULL,
                                        psProdkod      IN tis.tiin.prodkod%TYPE DEFAULT NULL,
                                        psStatus       IN tis.tiin.status%TYPE DEFAULT NULL) AS
     --
     cTIAL         tis.tial%ROWTYPE;
     vLopnr        tis.tial.lopnr%TYPE;
     vSqlWhere     VARCHAR2(4000);
     vGroupBy      VARCHAR2(1000) := ' tiin.kampkod, tiin.abnr, tiko.fordsalj';
     cSelectCursor SYS_REFCURSOR;
     vSqlSelect    VARCHAR2(4000);
     psDays        VARCHAR2(50);
     cRec          T_TIAL_REC;
     nCount        NUMBER := 0;
  
     FUNCTION fnc_cSqlSelect(SqlWhere IN VARCHAR2,
                             GroupBy  IN VARCHAR2) RETURN VARCHAR2 IS
     BEGIN
        RETURN 'SELECT tiin.kampkod,
               tiin.abnr,
               tiko.fordsalj,
               MAX(tici.regdat) ALARMDATE
          FROM tis.tiin
          JOIN tis.tiko ON tiin.kampkod = tiko.kampkod
                       AND tiin.abnr = tiko.abnr
          JOIN core.tici ON tiin.kampkod = tici.kampkod
                        AND tiin.abnr = tici.abnr
                        AND tici.inplnr = tiin.inplnr
         WHERE 1 = 1 ' || SqlWhere || ' GROUP BY ' || GroupBy;
     END fnc_cSqlSelect;
  
  BEGIN
     -- If these parameters are null, raise error
     IF psUppgkedjetyp IS NULL AND psSubtyp IS NULL THEN
        raise_application_error(-20001,
                                'Either Event Chain or Starting Event must be assigned');
     END IF;
     -- Populate TIAL values
     IF psUppgkedjetyp IS NOT NULL THEN
        cTIAL.Uppgkedjetyp := psUppgkedjetyp;
     END IF;
     --
     IF psAlarmtyp IS NOT NULL THEN
        cTIAL.Alarmtyp := psAlarmtyp;
     END IF;
     --
     cTIAL.Handklass := 'T';
     cTIAL.Blobid    := 0;
     --
     IF pnDays IS NOT NULL THEN
        psDays := '+ ' || pnDays;
     END IF;
     IF psSubtyp IS NOT NULL THEN
        cTIAL.Subtyp := psSubtyp;
     END IF;
     -- Create Where clause for cursor
     vSqlWhere := '';
     IF psKampkod IS NOT NULL THEN
        vSqlWhere := vSqlWhere || ' AND tiin.kampkod = ''' || psKampkod || '''';
     END IF;
     --
     IF psKatnr IS NOT NULL THEN
        vSqlWhere := vSqlWhere || ' AND tiin.katnr = ''' || psKatnr || '''';
     END IF;
     --
     IF psUtgava IS NOT NULL THEN
        vSqlWhere := vSqlWhere || ' AND tiin.utgava = ''' || psUtgava || '''';
     END IF;
     --
     IF psKatslag IS NOT NULL THEN
        vSqlWhere := vSqlWhere || ' AND tikg.katslag = ''' || psKatslag || '''';
     END IF;
     --
     IF psProdsyst IS NOT NULL THEN
        vSqlWhere := vSqlWhere || ' AND tikg.prodsyst = ''' || psProdsyst || '''';
     END IF;
     --
     IF psUppgtyp IS NOT NULL THEN
        vSqlWhere := vSqlWhere || ' AND tiin.uppgtyp = ''' || psUppgtyp || '''';
     END IF;
     --
     IF psProdkod IS NOT NULL THEN
        vSqlWhere := vSqlWhere || ' AND tiin.prodkod = ''' || psProdkod || '''';
     END IF;
     --
     IF psStatus IS NOT NULL THEN
        vSqlWhere := vSqlWhere || ' AND tiin.status = ''' || psStatus || '''';
     END IF;ç
     -- Loop through all records meeting input parameters and set required TIAL values.
     OPEN cSelectCursor FOR fnc_cSqlSelect(vSqlWhere,
                                           vGroupBy);
  
     LOOP
        FETCH cSelectCursor
           INTO v; -- You must define a variable 'v' to hold the data of cursor
        EXIT WHEN cSelectCursor%NOTFOUND;
  
        --FETCH cSelectCursor INTO cRec;
        cTIAL.Kampkod   := '';
        cTIAL.Abnr      := '';
        cTIAL.Sign      := '';
        cTIAL.Alarmdate := '';
        cTIAL.Kampkod   := i.Kampkod;
        cTIAL.Abnr      := i.Abnr;
        cTIAL.Sign      := i.fordsalj;
        cTIAL.Alarmdate := i.alarmdate;
        --
        nCount := nCount + 1;
        --
        IF vLopnr = -1 THEN
           raise_application_error(-20002,
                                   'Error Creating task for: ' || cTIAL.Kampkod || ' ' ||
                                   cTIAL.Abnr || ' Sales Rep: ' || cTIAL.Alarmdate);
        END IF;
     END LOOP;
  
     CLOSE cSelectCursor;
  
     DBMS_OUTPUT.PUT_LINE('I created ' || nCount || ' records.');
  
  END createFollowUpTask_Exposure;
  /
  

  Kind regards

• NEED HELP IN THE GROUP BY CLAUSE CASES PLEASE

  User1983440 thanks for the help with the script below grouped by product category, can you or someone else help me group by another Case statement as well.
  
  
  WITH p AS)
  Select distinct
  partner, region, od. ORDER_AFFILIATE_NAME,
  Oh.external_order_number,
  Ain.get_g1 (queue_type) offers,
  Case
  When disp.category = 100 Then 'ORDER'
  When disp.category = 200 Then 'ACCESS'
  When disp.category = 300 Then 'DSL'
  When disp.category = 600 Then 'IPTV'
  "When disp.category = 700 Then'INTERNET"
  When disp.category = 800 Then 'VOIP'
  End up like product_category,
  To_char(OH.created_ts, 'yyyy-mm-dd HH24:mi:ss') CREATE_DATE
  -Case when ip.offer_type = "IPDSLAM" or instr (ip.display_name, "-d") > 0
  THEN 'IP - LAN'
  ELSE 'FTTN.
  end as product_type
  Case
  When disp.state = 4 and disp.state = 9 or disp.state = 21 or 22 = disp.state then 'cancelled '.
  When disp.state = 17 then "NRFC cancelled.
  When disp.state = 7 Then 'incomplete '.
  When disp.state = 3 or disp.state = 8, then "Finish".
  When disp.state = 6 or disp.state = 10 and disp.state = 13 or disp.state = 14 then 'pending - other ".
  When disp.state = 19 disp.state = 20 then "sent".
  When disp.state = 21 or disp.state = 22 then "Cancelled - CSUS.
  When disp.state = 23 or 24 = disp.state then 'Order Confirmation '.
  When disp.state = 1 or disp.state = 2 or disp.state = 15 then "receipt".
  Another 'other '.
  End as STATE_desc
  of AIN.impl_oh_order_header oh,.
  Ain.impl_order_data od,
  DISP AIN.sncr_order_curr_disp,
  AIN.impl_package ip
  where oh.created_ts between to_date ('2013-02-04', ' yyyy-mm-dd "")
  and to_date ('2013-02-11', ' yyyy-mm-dd "")
  and oh.order_type = 'COMMAND '.
  and disp.category to (200, 300, 600, 700, 800)
  and disp.state! = '5'
  and uscs = 0
  and disp.transaction_id = oh.transaction_id
  and od. transaction_id = oh.transaction_id
  and ip.transaction_id = oh.transaction_id
  and ip.package_type = 'PACKAGE '.
  and ip.parent_package_id is null
  and ip.product_type = 'COMMAND '.
  )
  SELECT product_category,
  COUNT (*)
  P
  GROUP BY product_category

  To summarize, by category of product, and then by state_desc:

  WITH p AS (
  Select distinct
  partner, region, od.ORDER_AFFILIATE_NAME,
  oh.external_order_number,
  ain.get_g1(queue_type) offer,
  Case
  When disp.category = 100 Then'ORDER'
  When disp.category = 200 Then'ACCESS'
  When disp.category = 300 Then'DSL'
  When disp.category = 600 Then'IPTV'
  When disp.category = 700 Then'INTERNET'
  When disp.category = 800 Then'VOIP'
  End as product_category,
  TO_CHAR(oh.created_ts, 'yyyy-mm-dd hh24:mi:ss') CREATE_DATE,
  Case when ip.offer_type = 'IPDSLAM' or instr(ip.display_name, '- D')> 0
  THEN 'IP-DSL'
  ELSE 'FTTN'
  end as product_type,
  Case
  When disp.state = 4 or disp.state = 9 or disp.state= 21 or disp.state= 22 Then 'Canceled'
  When disp.state = 17 Then 'Canceled NRFC'
  When disp.state = 7 Then 'Incomplete'
  When disp.state = 3 or disp.state = 8 Then 'Complete'
  When disp.state = 6 or disp.state = 10 or disp.state = 13 or disp.state =14 Then 'Pending - Other'
  When disp.state = 19 or disp.state = 20 Then 'Submitted'
  when disp.state = 21 or disp.state = 22 then 'Cancelled- CSUS'
  when disp.state =23 or disp.state = 24 then 'Order Confirmation'
  when disp.state =1 or disp.state = 2 or disp.state = 15 then 'Received'
  Else 'Other'
  End as STATE_desc
  from AIN.impl_oh_order_header oh,
  ain.impl_order_data od,
  AIN.sncr_order_curr_disp disp ,
  AIN.impl_package ip
  where oh.created_ts between to_date('2013-02-04', 'yyyy-mm-dd')
  and to_date('2013-02-11', 'yyyy-mm-dd')
  and oh.order_type = 'ORDER'
  and disp.category in (200, 300, 600, 700, 800)
  and disp.state !='5'
  and uscs= 0
  and disp.transaction_id = oh.transaction_id
  and od. transaction_id = oh.transaction_id
  and ip.transaction_id = oh.transaction_id
  and ip.package_type = 'PACKAGE'
  and ip.parent_package_id is null
  and ip.product_type = 'ORDER'
  )
  SELECT product_category, STATE_desc,
  COUNT(*)
  FROM p
  GROUP BY product_category, STATE_desc
  

  To summarize by state_desc, just remove "product category", the query above.

• Control the Boolean commands and generate a corresponding digital output

  Hi all

  I'm working on a project of activation of the electrode, here, I thought that how could I order an electrode in a time and generate a digital output of it accordingly. I want to replace it with each electrode with a LED on the front panel and generate a numerical value to each LED on the block diagram.

  If it can be divided into two parts

  1 control the Boolean outputs

  Here, my goal is that if I have 5 leds that are used as a Boolean control, must be ordered so that only one of them lights up at the same time and the rest goes off.

  I mean for example if #3 was turned on and that the user pressed the #3 #2 should be turned off and only #2 lights.

  2. generate the corresponding numerical value

  
  Depending on the position of the LEDs I want to generate a corresponding numerical value, as previously released 3 coming and exit 2 then comes when the second LED illuminates.

  I ask all participants to this group to help me with this.

  Concerning

  Why don't you use the radio button control? You can replace the boxes if you want the buttons.

• Script to add a domain user to the local Administrators group raises the error "the network path is not found."

  I have a Windows Server 2008 R2 domain and a Windows XP Pro workstation that has been attached to the domain and then disconnected. I am trying to create a VBS script to add a domain user to the local Administrators group.

  I log on my computer as a local administrator and run the following script:

  Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
  StrPC Dim: strPC = oNetwork.ComputerName
  Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
  Dim OUser: Set oUser = GetObject ("WinNT://domainname/username")
  oGroup.Add (oUser.ADsPath)

  This script returns the error "the network path is not found."

  However, I am able to go into control panel > user accounts > enter the user name and the domain name > click Next... > choose the administrators of the 'other' group and the user name will be added to the local Admin group.

  The same script runs without error if it is launched after logon on the workstation with a domain administrator account.

  How can I get my script runs without error, when you are logged into the workstation as a local administrator?

  Best regards, Andy

  The code that I used came from here. If the syntax of the Add method is passed to oUser.ADsPAth to "WinNT: / /" & domainname & "/" & username, the script works correctly.

  Therefore, the modified script:

  Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
  StrPC Dim: strPC = oNetwork.ComputerName
  Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
  Dim strUser: strUser = "WinNT://domainname/username."
  oGroup.Add strUser

  Thanks to Qasim Zaidi to show the code of work here.

  Best regards, Andy

• Where to find the local Administrators group?

  I wonder had to find what he's talking about if I change the number of Directors.

  Group members check Description

  This check identifies and lists the individual user accounts that belong to the local Administrators group. If more than two individual administrator accounts are detected, Microsoft Baseline Security Analyzer® will list the names of account and flag the check as a potential vulnerability. In general, we recommend that you keep the number of Directors to a minimum because administrators essentially have complete control over the computer.

  © 2002-2007 Microsoft Corporation. All rights reserved.

  NT TrustedInstaller service is necessary as an administrator?

  Yes.

• Domain users do not have local administrator rights, although I already added them in the local Administrators group

  I gave my domain users with local administrator rights. But they do not get the Control Panel, rights to open the network and sharing Center, and they could not change the registry... etc what is the solution for this? domain administrator I could be able to make any changes in this PC. We are facing this problem in all of our VMWare PC 7 on windows. I tried to add everyone in the local system Local Administrator and add the domain users group to the local administrator groups, but no luck...

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• The concept of Group of tunnels WebVPN

  I'm WebVPN configuration in ASA (7.1.2) and I have a question about the tunnels WebVPN group attributes. I would if I can get a link useful to understand or explain quickly.

  Group Q1 alias). It is the name of group policy, and then choose when connecting? If so, can I configure group such as URL-list policy and choose when connecting to choose different group policy?

  Group - url of Q2). According to the doc, not necessary to choose the name of the group if the user types the URL (or IP) configured here. If I have two groups WebVPN and a single public IP address of ASA, how can I differenticate between groups of WebVPN.

  Q3) when connecting WebVPN, how can I control a user to choose a specific group policy name when you use the AAA authentication? I can associate local users on behalf of the group, but I don't know is it possible in the case of the AAA authentication.

  Thanks in advance,

  (2) group-url is another way to give users the right tunnel-group and political party. It is also configured under the params webvpn of the tunnel group. You must specify a url for each group of tunnel.

  (3) in order to put the user in the right group with aaa you go back 25 Radius attribute to the ASA. The user will send user/pass to the ASA. The ASA will transmit to the user/pass to the aaa server.

  The aaa server will search the user and return a past or a failure response AND assign 25 = something. All ASA receives for attribute 25, it will try to match a group - policy.group - lock in group policy must be enabled to place the user in the correct tunnel group.

• Doubts formidable wrt "select", "join" and "group by" clause to calm a while...

  Dear all,

  Kindly advise on below 2 doubts which have been daunting for quiet some time. The bottom has forced our requests to take alternative routes to receive solutions.

  Doubt 1) is it possible for us to use 'select (*)' with a group and a join clause, if we have at least 2/3 tables with minimum 15-20 columns... given the constraint of having to add all the names column in the group by clause.

  Question 2) is it possible to use "select" (*) with the exception of a single column of the table?
  That is to say, I hate the output of a statement select (*) to have the entire field except a field in a table

  Ask your advisor for the same thing. Excuse me because I have no examples to illustrate this point in time. A successful idea will do.

  Thank you and best regards,

  Séverine Suresh

  Hey, Sebastian,

  Séverine Suresh - 3035408 wrote:

  Dear all,

  Kindly advise on below 2 doubts which have been daunting for quiet some time. The bottom has forced our requests to take alternative routes to receive solutions.

  Doubt 1) is it possible for us to use 'select (*)' with a group and a join clause, if we have at least 2/3 tables with minimum 15-20 columns... given the constraint of having to add all the names column in the group by clause.

  Sure.  If you had problems, you did it wrong.  Your postal code, examples of data (CREATE TABLE and INSERT statements) and the results desired from these data.

  Check out the Forum FAQ: Re: 2. How can I ask a question on the forums?

  Normally, you don't want to ' SELECT *...» "in a join.  Are most joins are equijoins, ' SELECT *...» "produced 2 copies of / columns used for Assembly.  In addition, many tables have columns (for example, modified_date) that are not necessary in most applications.

  All columns must be included explicitly in a GROUP BY clause. You cannot use * it.

  You can not have parentheses around the * in ' SELECT *...» ».  You might think 'SELECT COUNT (*) '

  Question 2) is it possible to use "select" (*) with the exception of a single column of the table?
  That is to say, I hate the output of a statement select (*) to have the entire field except a field in a table

  ...
  

  No.; If you don't want a particular column in the result set, you cannot use "SELECT *...» ».

  Your front end can have so as not to display a column in the result set.  For example, in SQL * more:

  COLUMN modified_date NOPRINT

  means that you won't see any column called modified_date.