Control valve, choose which module?

Similar Questions

• Re: Which module of memory is good for Satellite P30 145

  Hello.
  I need a little help to decide which module of memory I need to upgrade my P30-145. IV ' e two seen on the Toshiba web site which I think I can use. We're the PA3313U - 2M1G PC2700 DDR SODIMM (333 MHz) and I saw this one mentioned and recommended elsewhere on this forum. The other is PA3411S - 2M1G PC2 - 4300 DDR2 (533 MHz)
  The processor is an Intel Pentium 4 with a clock speed of 3.2 GHz and a 533 MHz front side bus speed.
  Anyboy can advise

  Thank you

  Hello

  for your CPU, you need the PA3313U - 2M1G PC2700 DDR SODIMM (333 MHz) since the PA3411S - 2M1G PC2 - 4300 DDR2 (533 MHz) is not compatible for your machine.

  PA3411S-2M1G PC2-4300 DDR2 (533 MHz) is for newer machines with Core2Duo and the more recent Pentium M, but not for the Pentium 4.

  If you buy some RAM just ensure that you purchase RAM DDR1 PC3200 or PC2700. That's all.

  If you want to learn something about frontsidebus and memory clocks, consult the following link:

  http://en.Wikipedia.org/wiki/Front_side_bus

  Welcome and good weekend

• How the repeating table inside a control valve?

  Hello

  Does anyone know how to make the repeating table inside a control valve in LabWindow CVI? I see that there is option for a Panel to scale content in resizing, but not available for a tab control. Any ideas?

  Thank you very much!

  Weiming

  I don't know, I understand what you're trying to do, but you can set ATTR_SCALE_CONTENTS_ON_RESIZE on each tab panel.

  GetPanelHandleFromTabPage (panelHandle, PANEL_TAB, 0, & tabPanel);
  SetPanelAttribute (tabPanel, ATTR_SCALE_CONTENTS_ON_RESIZE, 1);

• NEITHER USB-6008 connect to thermocuples and pressure sensors, control valve

  I am endevoring to build a gasification plant biomass for bench scale test process control plans. NEITHER USB-6008/6009 will be adapted for use as a data acquisition. I'll take RTDS, thermocouples and pressure sensors. I don't want to use industrial automation controllers.  It is also possible to use the channel of analog output for sending signals to a control valve position (using sufficient current/voltage between the two drivers).

  (1) OK.  I just wanted to be sure that you were aware of the potential dangers.

  (2) an RTD is a resistance that has small changes in resistance per degree of temperature change. To measure that you have need of a current source and a sufficient resolution in order to detect small changes.  At 25 degrees C a typical RTD is 109,73 ohms and resistance ohms 0.38 per degree changes.  If you had 1 my crossing this RTD voltage through it would be 109,7 mV and the voltage change of 0.38 mV by degree.

  The resolution of the 6008 on the most sensitive range is 0.49 mV > 1 degree.  The accuracy of the 6008 is 1.5 mV typical.

  For a Type K thermocouple, voltage at 25 degrees is 1.407 mV and change by degree is 39 µV.  Millivolt solving half of the 6008 translates into about 12 degrees.

  If you need a source of excitement for RTD and a kind of amplification for thermocouples and RTD before she would make any sense to try to use USB-6008.

  (3) I have not used anything except LabVIEW with DAQ devices and drivers.  I think DAQmx can be used with MATLAB and other languages.

  (4) the 6008 is the low range made by NOR. You will need to go to a more expensive camera or add signals conditioning circuits.  Talk to your representative OR assistance in the choice of a suitable device.

  Lynn

• How to choose which shared variables to read

  I am trying to clean up a code and I'm looking for style tips. The following code actually works as you wish, but I wonder if there is a more elegant way to do it.

  I have a number of variables shared playing of Modbus devices. The problem is that these can be disabled as needed. When the unit is off, all vi to try to read that variable sharing waits a time out, then gives an error.

  What I did is to put each read operation in a case structure and then have an array of Boolean to tell which ones is turned on (see screenshot). It works fine, but I wonder if there is a better way to do it?

  Thank you

  Mike

  Replace all the tables index and case with a single loop and use 'I' connected to a case to choose which variable to read.

  /Y

• A program to choose which audio device uses

  I saw the same question asked and asked and on many different forums with many different responses, most of which don't really know what was the real problem.
  
  Is there a way to get the Application use Audio Device 1 and get B asks to use Audio Device 2?

  Before people will tell me how to tell what Audio device to use Windows Media Player or VLC, I KNOW!  It does not help a bit.

  I want to be able to do if the two Application A AND B of the application don't have the ability to select which sound device they use.

  I am running Win 7 64 bit. I have a 5.1 speakers connected to my onboard sound and I have my TV connected to the HDMI connector on my graphics card.

  What I want to achieve is to have the sound of the game I play to get out of my speakers, and the sound for the film I'm streaming come on my TV.
   
  I have not yet found an option in IE, Firefox, every night (64 bit Firefox) or Chrome that allows me to use what audio device they use. Not one that would be important they use other applications like Flash Player or Silverlight to stream the video, or which have an option to choose which audio device they use, although oddly enough I found an option to select what mic was used on a single program...

  The programmers of these two Star Wars: The Old Republic and The Secret World, (the two games I play right now) have neglected to include the ability to choose which Audio device they use in the games options.

  I came across a post suggesting IndieVolume, I thought "Great, the answer to my prayers!", I downloaded the trial version to see if it would work. Installed, open it, looked at GUI, set up... Nothing has changed, did not work.

  There must be a way to do it built-in to Windows or that you would not get the option to select which audio device WMP can use.

  I would have liked to be able to do this easily in Windows 7, because after all was not Windows 7 supposed to be all about doing things you want to do with your PC, so much easier to do? I wish more programmers to understand that it is really necessary for the choice of the audio playback device in their games.

  Until these times there at - it anyone out there that can suggest a program or something that will help reach my goal? Or a way to do within Windows?

  IE and Silverlight are the two Microsoft but they don't give you the option.

  There must be programming in Windows to do can you supposed to have a reading of default communication as a standard device. Surely, that works on the same principle, with various programs that will be run, get recognized by windows as a program of communication and see their directed audio output in an appropriate manner.

  Is there a way to access which programs windows recognizes as a communications program and adding to the list manually?

  Force windows to think that request is a communication program and get the result of requests, the value 1 of Audio device which is defined as the "default communication device".

  Leave the Application B crossing 2 Audio device which is defined as the "Default Device".

• To choose which pictures to import archive them or remove the check mark?

  To choose which pictures to import from a folder I mark to import ot uncheck?

  Remove the checkmarks of the ones you don't want.

• EBS R12.2: How to check which modules are license activated?

  Hi all

  I want to know which modules are licensed activated in on ebs.

  I got to:

  -Navigation:
  the responsibility of "system administrator" > License Manager

  
  

  By I don't see here License Manager

  

  
  

  Help, please...

  
  

  Thank you

  MK
  

  Hello

  Please see:

  

  Thnaks,

  A H E E R X

• Hello, I'm testing creative cloud, I really need help to know which module to install to create simple web pages

  Hello, I'm testing creative cloud, I really need help to know which module to install to create simple web pages

  Hi Cyril,.

  It depends on what you want to do. If you have experience with coding, you can download Dreamweaver to create Web sites by using the two code + design of knowledge.

  With Muse, you can design beautiful Web pages and Muse will generate the code for you.

  I hope this helps!

  -Emily

• DPS is their function where the user can choose which pages they want to keep, to build a custom (build yours) version for themselves.

  DPS is their function where the user can choose which pages they want to keep, to build a custom (build yours) version for themselves.

  N °

  Neil

• What is Manager required URI, download of CC before?  Choose which application? on W7

  What is Manager required URI, download of CC before?  Choose which application? on W7

  
  

  Please see:

  http://helpx.Adobe.com/creative-cloud/KB/AAM-updating-CC-desktop-app.html

  Follow the instructions for Solution-1.

  Kind regards

  Ashutosh

• Place a Word document by choosing which attributes to keep

  I have several book layouts to build everything with manuscipts provided in MS Word. In the past, I have deleted all the attributes of character of the Word doc (italic, line spacing, breaks, etc.) and then placed the doc in ID and rebuilt all of the attributes removed from scratch in ID. How can we choose which attributes to avoid that the Word document? For example, if it is desirable to keep all withdrawals, italics and font sizes, but not attack/spacing (which ignores lines 1,5 or 2 - too), how this is handled?

  http://help.Adobe.com/en_US/InDesign/6.0/WSBF901E71-51E8-415f-815D-D646AC9ABC2Ea.html

• Belongs to which Module

  Hi guys need for emergency assistance.
  
  I need to load some data from Oracle EBS (Source System) for the Data Warehouse.
  
  Need to load the data for sub modules through DAC.
  
  (1) capital
  (2) iexpense
  (3) cash management
  
  Can someone let me know which module they belong to (such as finance, Supply Chain etc.) in Oracle EBS
  
  Thank you
  Cédric

  They are modules in themselves. You want to know which sector to which they belong - that would be financials.

  Published by: user11986881 on January 12, 2011 08:24

• Control valve tank with plots and twists of the water

  Hello everyone!

  This is my frist real project. And I am in love with this program so far!
  I have a little problem. Here it goes:

  The project of the University which has been given to us is to simulate a (entrance OPEN/CLOSED valve) water tank filling and emptying (output range of 0 to 100% valve), but with a few twists. It is done by the command to the movement by the following formula: flow rate [%] = position of the valve [%] * current water height [%]. (The output valve takes values in percentage from 0 to 100% giving the voltage digital output of 0 volt to closed(0%) or 5 volumes for open(100%), the strange part, is that the digital output can have a value of 0 or 1, so the position of the valve is "simulated".) And the supply valve (valve entrance) water can be open or closed (if 0 or 5 volts)

  -Sequences cannot be used (only one for initialization and cleanup can be used)

  -When the water level reaches 10% of the max height, LED lights, the output valve closes and the input valve opens. The LED is on until the button is pressed. The output valve cannot be opened until the water height is greater than 50%.

  -When the water level reaches 90% of the max height, LED lights, the entrance valve opens. The LED is on until the button is pressed. The output valve cannot be opened until water height is less than 50%.

  -There are two mode selectios:

  Control by hand: the person sets the position of the valve in percent and the flow is calculated by the formula and displays on the screen.

  Automated: Every 2 seconds the program assigns the place valve so that the current is constant, it is the value by the person.

  -(N'ont pas gottern ici encore) ESD (Emergency shutdown switch) the when is pressed both the entry and exit valves are closed. The entrance valve cannot be oppened up to the RESET_IN key. If the program is 'Control in manual mode' output valve cannot be opened until the RESET_OUT touches. In which case the output valve is in "Auto" mode, it does not start work until the RESET_OUT touches.

  My main problem here is the fact, I cannot use sequences and nested, then the loops do not work. The aqusition of data stops until the inner circle loop ends and I need both work. Especially for the 50% rule.

  I've been hitting my head for a few days and still couldn't come up with a solution.

  I have attached the VI.

  Tips are welcome!

  For the time being the outputs inputs/digital analogue are a simulation (when the time comes the USB-6008 material is used).

  There is some things that confuse me (as if the valves are percentage, from 0 to 100%, or digital, 0 or 1), but regardless, it's a detail.

  Review the task and consider what you want to do and that the "States" the system may be in.  [This with a pencil and paper, do not open LabVIEW yet...].  The description of your problem learn you something about the transition from one State to another.  Here is a thought exercise:

  Suppose you are in a "State".  Let the system to "do its thing" for a second, which could involve the water flow.  At the end of the second re - evaluate your state - it changed?  Continue to do this...

  This model of 'something' is called a State Machine and LabVIEW has some very good examples and tutorials on the creation and use.  The important things to do before you make your coding is (with the pencil and paper) decide on your statements, decide on the transition rules, and then you are ready to code.

  There are different ways to build a State Machine in LabVIEW, but the basic idea is quite awhile (to keep things moving along, a shift register which includes the current state, usually represented as an enumerated, Type whose values are simply the names of your States (made for a very mnemonic routine) and a Case statement whose power is the State of the shift register that contains the code to achieve this) particular State of loop, including the implementation of transitional rules (which can cause a new State on the registry to lag when it comes out of the investigation of the case).

  A great exercise.  Strive to keep your block diagram on a single computer screen by making use of the screw subgroup chore (as the management of changes in the water level based on the current water level and "States" (which here means 'values') two valves).  Once you understand the 'Idea' State Machine, you should be able to write the code for this problem quite easily.

  Bob Schor

• How to choose which site a new tab go to?

  When I open a new tab by clicking on the sign more, need me to an empty search bar that uses bing. I wish that the new tabs to take me to google.

  Here's how you can change your new tab page:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered

  (3) double-click the preference browser.newtab.url and enter your favorite page:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Press Ctrl + t to open a new tab and check that it worked. Fixed?

  If the problems persist, some potential diagnoses and remedies:

  If Firefox will not let you change this setting: you can have what is called SearchProtect on your system. This must be removed the control panel.

  Firefox if allows you to save your changes, but he doesn't know: one of your extensions may be the substitution of her. You can consult, disable and/or remove extensions on page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, take a critical look on the list on the right and turn off (or remove) something unknown.

  If the modification works during your session, but during the next startup is return to the unwanted page: you could have a user.js file in your personal settings Firefox (your Firefox profile folder). This article describes how to track down and delete the file: How to fix preferences that will not save.

  A little luck?