Controll - Lenovo mottion Guesture

Similar Questions

• How to install Windows 7 on the new hard drive?

  I changed the old hard drive (500 GB) with a new hard dirve (1 Tera) and now I have two problems:-

  1. how to install Windows 7 on a new hard drive?

  2. my laptop came preinstalled Windows 7 Pro, but all the DVD kit (disk reclaimer Application & discs) + Revocer operating system, which has been provided (by Lenovo) for the laptop is in the Windows 8 Pro. So, how to install Windows 7 Pro, my laptop while all the DVD sets are in Windows 8 Pro?

  either way, this is my laptop spec (for reference); -

  

  * Note *.
  I intend to install Windows 7 Pro on my new hard drive using another DVD of Windows 7 (not DVD provided by Lenovo), but how do all Leveno program located in the disk 'Application & recuperator readers' (by example; - Lenovo system health and Diagnostics, Lenovo Power Control, Lenovo Fingerprint Reader) to install this hard drive? (as I told you before, all the DVD kit is at or only for Windows 8 Pro)

  I hope someone will help me answer my question,
  Thank you

  I found the solution.

  Response to question 1; using a recovery & backup software to clone my current operating system, and then transfer them to my new hard drive.

  Response to question 2; Download all drivers and software (all the application that located on the DVD of the kit I have) on the official website of Lenovo.

  or another solution, send to a computer service shop and let the experts (workers) install it for me (the most simple and sure way).

• Auto lock mode: how to disable?

  Great when you're on Walkabout with your laptop, when I'm at home, laptop plugged in, I don't want my laptop to keep coming back to a login screen every few minutes.

  I am on a Thinkpad E520 running Windows 64 bit professional.     Here's what I've tried so far without success:

  (1)--> control Panel--> Power Options I have everything "maximum performance" put and disabled the display standby timers.

  (2) control Panel--> Lenovo - camera-enhanced security--> I have disabled camera and timers recognition features.

  (3) Board of control--> Lenovo Power Manager--> I disabled all timers.

  Disabling the options in the control panel areas above doesn't seem to affect the automatic protection feature.    This automatic locking descent touch is driving me crazy at home, the only consolation is that the fingerprint reader makes it a little easier to get back in once the laptop goes down.    It's like a terrible screensaver you hate that cannot be disabled.

  How this auto-lock feature is turned off?   Ideally it should be a big button available in the toolbar you can push: walk - stop.   This way you can easily turn the timer on and off with a single action suites.

  But for the moment, I can't find anything in the control panel or from the taskbar which turns off this lock automatic descent touch.

  Where is he?

  I do not know... I uninstalled the function with all enterprise-level random stuff that was on the system that I don't use.

  This article may be useful:
  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/Lenovo-Autolock-for-Windows-7-32-bit-64-bit...

  You can recover the files of automatic locking all Lenovo drivers and other utilities of http://support.lenovo.com.
  For example, the automatic locking:
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS014982

  Computers laptops Lenovo are more equipped to restore disks; You can create your own recovery with Rescue and Recovery media. You can also find the original drivers supplied with the machine in C:\DRIVERS, C:\SWSHARE or C:\SWTOOLS.

• Lenovo U430 Touch Motion Control Software

  To the right (Lenovo)

  I had to uninstall my software of motion control for my U430 Touch software error.

  I see that's not anywhere online, if it is not too much trouble Lenovo put the software either

  here or on the Web page of drivers?

  Thank you very much

  DesertFox899

  Try this package:
  http://support.Lenovo.com/en/downloads/ds100323

• Lenovo B590 fan speed control

  Are there programs for my laptop to control the fan speed?

  Hi Synful,

  Welcome to the Forums

  Try to update the BIOS and check.

  Click here for the update of the BIOS.

  Best regards

  Ashwin. S

• Help... In Lenovo brightness control button all in a single C360-4061 does not

  Hello

  I bought all in a single C360-4061 and the birght full screen, it hurts my eyes... I tried to push the command button birghtness but not working.i tried the shortcut (fn + home and fn + end) but doesn't work no more.

  anyone can help to solve?

  thanx

  Best regards

  ... EUREKA!

  found the solution...

  Download the driver from this link... the brightness control works...

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProductFamily=graphics&ProductLine=deskt...

  I hope this will help others with the same question...

  Thank you

  Best regards

• Firefox crashing on startup - 40.0.2 on Lenovo T450s

  Crash ID: bp-eee4103b-b29d-45bc-958c-a6aa12150819

  Updated Firefox 39.0.3 to 40.0.2, and it crashes at startup (even in safe mode). Roll back to 39.0.3 works very well.

  The latest Intel 5500 were provided by Lenovo with drivers of the video card installed (10.18.14.4206)

  The report of incidents reported these programs;

  sysfer.dll = Symantec CMC Firewall

  IPSEng32.dll = Symantec's Intrusion detection

  IPSLdr32.dll = Symantec's Intrusion detection
  +++++++++++++++++++++++++++++++++
  It's for the Sumo
  Related bugs

  1181091 NEW - 40 Firefox crashes at startup [@ @0 x 0 |] [ScopedXPCOMStartup: ~ ScopedXPCOMStartup ()] with the endpoint of Websense

  Type of topic: addons< enter > in the address bar to open your add-ons Manager.
  Access key; < Control >(Mac: < command >)< shift > has)

  In the Manager of Add-ons, on the left, select Extensions.
  Turn off the Norton, toolbar and then restart.

  Is always the problem?

• !! Lenovo M490s function keys and hibernate problem!

  Hello world!

  I bought the laptop Lenovo M490s week last without BONES. I installed Windows 7 Professional x 64 retail.

  First of all, I could not find the software that controls the function keys. After installing each driver and software support page (M490s) my function keys does not except Fn + F1 Fn + F2 sleep has turn off the screen, Fn + F6 disable touchpad and the buttons set. Also no information would display on the screen after pressing the buttons - no level volume and shine.

  After some research, I found and installed Hotkey features integration support Lenovo M490 (without S) page. Each function key is started working, information on the screen also start displaying (volume and brightness level).

  Now, I spotted a huge problem, after 3 or 4 hibernation volume and brightness keys (fn + up, down, left, right) stopping just at work! Fn + F1 to F12 key combinations work normal. Then after that restart brightness and volume keys work again!

  Please help me solve this problem, I can't live without hibernation!

  Thank you!!!

  THE PROBLEM IS SOLVED! Problem was in the BIOS!

  I loaded the default Installer and everything is great now.

  In addition, I have all excluded from the boot order except my SSD.

  Computer laptop brand new store had this bug.

• Lenovo - LSB - R2 Windows Server 2012 Service bridge

  I am trying to get it to install on my server.

  Here is my log file.

  The following properties have been defined:
  Property: [AdminUser] = true {boolean}
  Property: [InstallMode] = {string} HomeSite
  Property: [NTProductType] = 3 {int}
  Property: [ProcessorArchitecture] = {string} AMD64
  Property: [VersionNT] = 6.3.0 {version}
  Race reviews the ".NET Framework 3.5 SP1" package, the phase BuildList
  Reading value "SP" registry key "HKLM\Software\Microsoft\NET framework Setup\NDP\v3.5.
  Read the integer value 1
  "Definition of value ' 1 {int}" property "DotNet35SP".
  The following properties have been set for the package ".NET Framework 3.5 SP1:
  Property: [DotNet35SP] = 1 {int}
  Execution of the command controls 'DotNetFX35SP1\dotNetFx35setup.exe '.
  Result of operation operator "ValueGreaterThanEqualTo" property "DotNet35SP" and the value "1": true
  Therefore, controls for the command "DotNetFX35SP1\dotNetFx35setup.exe" "workaround."
  Result RunCheck ".NET Framework 3.5 SP1": no installation required
  Application launch.
  URLDownloadToCacheFile failed with HRESULT '-2146697208'.
  Error: An error occurred trying to download 'https://download.lenovo.com/lsb/LSB.application'.

  Thank you

  Brian

  Hello

  Thank you for choosing Lenovo server, however, Lenovo Service bridge (LSB) is currently not supported on System x server product line.

  REF. Getting Started with Lenovo Service bridge
  https://support.Lenovo.com/us/en/documents/ht104055

  If supplementary on LSB on the Lenovo Forums site, I suggest to go to the bottom of the list of full Board and post to:
  Software and operating system
  -ThinkVantage Technologies

  https://forums.Lenovo.com/T5/ThinkVantage-Technologies/BD-p/Special_Interest_Utilities

  Kind regards

• Lenovo Tablet 2 Yoga does not turn on

  It is good to hear that your Tablet works normally Sevast99! I hope that other people have the same results after perfomring my 'fix '.

  Also, perhaps a moderator could sticky my solution? Here it is again:

  Step by step solution:
  Disabled people Daydream - under display settings

  Switched on and enabled on-demand Power Off - software is complicated... maybe a toggle to clear the bug?

  Energy saving enabled Sceen and GPU - this is under power management settings

  Toggled on and toggled off "Turn off applications when the screen is off" - same as before thought process. Maybe it's buggy.

  Set the Smart Switch Lenovo on 'Manual' - I don't know what it is, but the automatic mode means that I can't control it... and I don't like it.

  After that I made these changes my Yoga 2 Android Tablet 10 "was normally achieve. I hope that someone can replicate this possible fix!

  09/03/15 EDIT: moved the post forward discussion for the purpose of climbing. Amy_Lenovo

  
  

• Lenovo X 201 laptop computer black screen and LCD does not detect after windows startup

  Suddenly, my Lenovo Thinkpad x 201 shows only a black screen. I checked the LCD screen with a light and I could see a dark image of the Thinkpad logo and then it go completely black. But when he is on safe mode, I saw my desk in black screen (when I use a light).

  I've updated the BIOS also using an external monitor. But still the same. I'm completely at a loss. Please someone help me to slove this problem...

  It is due to the inverter of the screen which has stopped working, it controls the backlight of the LCD/LED screen part when it breaks it causes the backlight to turn off and wont go on then you would need to have ups re-place with a new one.

  Here's an example of how it looks like:

  

  It may seem different on each model, but that's just one example of a lenovo T41.

• How to disable Lenovo energy management

  I have Vista Home Premium on my Y430. Once I disabled Lenovo Energy Management and used the Vista build-in power management. My impression was that the battery lasted longer when you use the build-in one than Lenovo Energy Management (4 hours from 3 hours in symmetric mode).

  I activated there is Lenovo energy management. But now I don't remember how to turn it off. Does anyone know how to disable? Thank you very much.

  I found a way to disable management of the energy of Lenovo using Windows Defender. Click 'Start'--> 'All programs', right click on "Windows Defender", select "run as Administrator". Click the 'tools' at the top of the window, and then click "Software Explorer". Click on 'Show for all users' in the lower left corner. In the "Category" list, select "startup programs". Select "Lenovo Battery Management Software VerX.X" on the left panel. At the bottom of the Panel, click the button 'Disable' (or 'Remove'). Lenovo Energy Management this will prevent to run the next time that you start your laptop.

  To activate it, just follow the steps above and click 'Activate' to the last step. Or you can go to 'Control panel'--> 'Power Options'--> 'change plan settings'--> "Change power settings advanced"--> "Lenovo Energy Management" to enable it.

• My lenovo A328 back home does not function

  I was watching videos on youtube when suddenly the app youtube closed by itself. then when I tried to open the Task Manager (where I must press the home button twice and closed the recent applications I opened before) it will not appear until that time (same situation when I press the previous button). I searched on lenovo and I read that my case may occur due to watching videos, phoneTV and so on. Right now I live with an Assistive Touch application that desperately, I installed. Is there anyone know how to fix this?

  Hi Redweasley,

  Welcome to the community of Lenovo!

  According to your message, we understand that your phone Lenovo A328 because of function keys programmable.

  Please check with the below control points for solving problem of phone:

  * Restart the phone 2-3 times.

  * Check with power chip.

  (Remove the battery if it is removable and long press on the power button.)

  * Check with the flight mode.

  * Refresh the RAM usage.

  * Erase browsing history.

  * Uninstall unwanted applications and the games and check.

  * Reconfigure the Gmail account and check.

  * Remove the screen protector and check.

  * Check if available (OTA) system update.

  Please let us know if the control points above helped you.

  Thanks and greetings

• Media on screen Volume control problem

  I'm unable to reduce or increase the volume on my screen when it comes to a media volume... Volume ring tones and notifications I can.

  Steps to reproduce:

  * Play a song or any games
  * Try to click the volume button that is on the side of the phone
  * volume media appears on the screen try reduce or increase the volume on the screen that does not happen.
  * but able to control via the side button

  Could you let me know phone is designed is such a manner or it should work. Can someone confirm please.

  Thank you!

  Andy,

  I am using lenovo vibe P1 update the latest patch... It seems that the fix was pushed back to the last update was done. Although I have some

  Android version: 5.1.1
  Build last updated: S137_ROW
  Model: Vibe P1

  There is a glitch while using the wide button to lock with an option screen click. Let's see if you can find it. But the media volume control issue is corrected.

  See you soon,.
  Just4onlineuse

• RAM Lenovo G40-45 AMD A6 problem

  Yesterday, I bought a new TEAM DDR3L pc-12800 4 GB laptop memory ram for my g40-45. I have a lack of ram 2 gb pc-12800 ddr3l location 1. I have install new ram in slot 2, but after that I installed the RAM, my 45 g40 lights. No logo, only black screen of lenovo. Please help me!

  Problem solved. I went back the RAM and received a new one and it works! So the problem isn't on the laptop but on the memory it me that first I received is probably failing.

  It seems team 12800 ddr3l memory was little quality control before the factory he has put on the market. I have also found in the other forum user has had this problem, they had the defect of memory.

  So my suggestion is if you're of course had this same problem, just return the memory to the Distributor and ask new memory Exchange same type same brand. I got this new memory which released the week 25/2016 (July) and it just works on my lenovo g40 - 45 amd a6 6310.

  BTW if you are installing memory make sure of course u plug in the large memory capacity on the first slot first is something essential to do!