Lenovo B590 fan speed control

Are there programs for my laptop to control the fan speed?

Hi Synful,

Welcome to the Forums

Try to update the BIOS and check.

Click here for the update of the BIOS.

Best regards

Ashwin. S

Tags: Lenovo Notebooks

Similar Questions

  • Satellite A500-138 - how to change the fan speed?

    Hello

    I have a question how to I change the fan on my A500 speed?

    I mean with power of change in BIOS, I don't have the option advanced on my BIOS so I can't change that... Any ideas?

    Hello

    > I have a question how to I change the fan on my A500 speed?
    > I mean with power of change in BIOS, I don't have the option advanced on my BIOS so I can't change that... Any ideas?

    You cannot change fan speed yourself, because there is no option in the Bios. I also tried to change with utilities like a fan speed control utility. But I couldn't stand it. Perhaps, someday they will out of the Bios with support for fan speed control. :)

  • The Dell Precision T7600 CPU temperature and fan speed

    Hi all

    I recently got a Dell Precision T7600 workstation that has two processors Xeon E5-2620.  I checked the specifications of Intel and the maximum temperature for these processors apparently is 77.4 C.

    However, when you run fairly intensive applications that can last a few days or so to analyze, I noticed that the CPU temperatures get much hotter than this no difference in the speed of the fan.  I used speedfan and CPUID to check the temperature/fan speed.  The highest I've seen the temperature was 90 c and the fan speed has been only 900 RPM.  He regularly sits on 70 c and still no response from the fans.

    I find this a little hard to believe given that surely fans should be a little lower than 90 c action!  I checked the settings of the bios (version A05) and the fan speed control is on auto.  I have also run the diagnostics and it reported no problem.  The fans run, but I'm not convinced that is the speed controller!

    Is this normal?

    I managed to re - install the A10 bios (it appeared to include a few things my already installed version is not ).

    Anyway, tried to launch a number of things to keep the processor at 100% for a few hours.  It seems that the fan speed changes now and the maximum temperature of the processor, I was able to get (and briefly) was 72 C.  He had served mainly the mid to high 60s with fan speeds ranging between ~ 1000 - 1500 rpm, as required to keep it there.

    I would say that the new BIOS has solved my problem.

  • p6727c fan speed

    I just got a refurbished p6727c.  The CPU fan seems to be running at full speed (RPM 3040 according to SpeedFan) all the time, even under low loads CPU.  I checked the BIOS updates but don't see not listed.

    Is this normal?

    Well, I'm embarrassed to say that the response was simple and easy. I followed the suggestion of HP use F5 to restore the default settings of the bios, and fan speed control seems to work.

  • Satellite C660D - software to control the fan speed?

    Just brought a C660D. Someone knows the software to control the fan speed?

    My laptop CPU fan always turns to 74-80% of max speed. That's a lot of noise. I tried cpucool, but it did not work.

    If does not work, the fan speed will remain at the temperature of 0 with cpu at 38 oC. But with any operation tiny, like the click of the mouse, it will change again to 74%, CPU temperature does not change.

    Hi Polaralbatross,

    Have you ever tried the Eco mode that uses the cooling battery optimized method?

  • Satellite A100: looking for a software to control the fan speed

    Hello

    I am looking for software of control/read on my laptop fan speed, because energy does not seem to do anything. It seems not serious if I set the 'method of cooling' to 'Battery optimized' or 'Maximum Performance' or fixed CPU processing speed. I () has installed the Module & Power Saver town a couple of times without success.

    SpeedFan & NHC will not work.

    Hello

    Sorry but I do not share your view on Power saver utility. Do you really believe that Toshiba create tool like that for nothing? Just FYI: public service power saver is not available with Vista operating system and on this forum, you will find topics where people really miss this fun and useful utility.

    In any case, it is well known that many tools that you can find on the internet do not have much influence on laptop cooling fan speed. To be honest, something like that can be very dangerous because the majority of users want to have silent notebooks and overheating problems are totally underestimated.

    Can you please be a bit more specific about your problem? Your laptop is too strong for you or is the short battery life? Why you are not satisfied with this tool?

  • HP 15 ac110tx: which is the driver to control the fan speed?

    I'm a bit confused and don't know exactly the name of the driver that controls the speed of the if laptop fan... .Please let me know the same thing...
    Thank you...

    Hello

    No driver but there are few places that control laptop fan speed: BIOS, temperature sensor and software (a lot of portable HP have software called CoolSene)

    Kind regards.

  • How can I change or control the fan speeds up my computer?

    my processor and motherboard run hot. the fan for processor speed is 20%, the other two are 30%. How to increase the fan speed to lower the temperature?

    I would not try to change the speed of the CPU fan. Clean the case out if its full of dust (if it's a desktop computer). If you can put more fans in the case, put more fans in it

  • Smart Z580 Fan Noise Control - I found the button, but how does it work?

    I just bought a Z580 with Windows 8. It has a Smart Fan Noise Control sticker. My understanding is that it can be used to control the fan speed. How? I don't find it in the manual. The button is the right most of five white labels under the badge of lenovo under the screen. Then, the fan (not really a button) button is one that looks like a sign with a quarter moon on the right. If I press on it, it does the cleaning thing fan but how do I speed?

    I would try to change the speed of the fan because my fan made a very slight sound pulse. Otherwise I love this computer. It has so many interesting features and works well.

    I think that you must install the version of Win7 power management software, as I think the Win8 version has only the option "dusting", when the Win7 version has 'standard', 'silent' and 'effective heat dissipation", also the"dusting"option by pressing the sensitive, stars and moon symbol.

    Make a system restore point before changing anything.

    John.

  • E535 fan speed fluctuates constantly

    I have what I think, this is a common problem with edges: My E535, I got a little more than a week, starts quietly. Then after about 3 minutes the fan will increase to high speed, even under light load (e.g. only Firefox running and limited scrolling or other activity). After a few minutes at high speed stabilized, it starts cycling up and down, upward and down, up and down... This is being moderately annoying. It does this if the unit is plugged in or on battery power. It also happens when I'm doing other things... OpenOffice spreadsheets or word documents or even just letting the system sit idle.

    I tried to change the settings with Power Manager, but for some reason, PM ends up crashing when I try to select a lower fan speed setting and a setting of normal brightness (level 10). The two issues could be related? I assume that similar positions for E530 and other seams it comes associated BIOS. Here's my info:

    MS Windows 7 Home Edition Premium, Version 6.1.7601 SP 1, Build 7601

    Edge E535 model 3260CTO

    AMD A4-4300 M, Radeon HD

    BIOS LENOVO HHET75WW (2.08), 24/10/12

    SM BIOS 2.7

    Thanks in advance for any help. I love the machine, except for this inconvenience!

    No, I simply ran the update http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029728 utility

    But now the problem is that the CPU fan is too passive. The laptop is very silent but overheating and choking the CPU if you do not limit the frequency of maximum processor which is annoying, but at least less annoying than the fluctuating fan.

    Edit: I should say that it strangles 900 Mhz CPU for demanding applications, when the temperature reaches about 75 ° C until the temperature drops to 50 ° C. Being able to control the fan speed could solve this problem, but apparently you can not on the E535.

  • How can Qosmio G30-126 - I check the fan speed?

    MODEL: G30 - 126
    OS: VISTA 32-BIT SP2

    How to know the speed of the fan? I have try several programs like "sensor hw monitor" & "fan speed" but it's not watch everything think about the temperature of the CPU just fan speed.

    Where is the problem and what I need to do?

    Hmm... Why you want to know the speed of the fan?

    The fan speed will be automatically controlled and you can t change this or manually control. You can change the method of cooling between performance and battery optimized in Vista power management. Did you check that?

    In addition, you can clean the laptop using a jet of compressed air as Akuma written. This could blow out the dust from the cooling fans.

  • Satellite A500-1GL: 2 questions: the fan speed & graphic card driver failures

    Hello

    I have 2 questions, hopefully someone can help me with that.

    * The first question - quick fan *.

    I'm on online gamer second life and world of the craft of war) recently my fan speed crank up to 90 percent for about 5/10 minutes before leaving quiet. Then speed up again after a period of time. I'm confused as to why he did this because when I check my cpu temp is only make 40%, and I use a cool buffer table.

    I'm looking for some advise here because all said Toshiba was making sure I had the latest bios update. But I would have thought it is not the processor overheating the fan must not be crank that quickly. My laptop is only 2 months old.

    Can anyone help, should I be worried?

    * Second question - graphics driver *.

    Also on a couple of times I got my screen briefly go black and then recover. A pop up appears saying something along the lines of the core of the graphics card.... Driver recovered. It flashes if fast, that I never see the entire message. Don't you think that something is wrong with the graphics card? (card nividia geforce gt300m)

    I really hope that someone can offer more help that Toshiba has done, as I am a bit unhappy to be problems on a 2 month old laptop.

    Thank you for reading and I look forward to any Advisor.

    (> I'm on online gamer second life and world of the craft of war) recently my fan speed crank up to 90 percent for about 5/10 minutes before leaving quiet. Then speed up again after a period of time. I'm confused as to why he did this because when I check my cpu temp is only make 40%, and I use a cool buffer table.
    > I'm looking for some advice here because all said Toshiba was making sure I had the latest bios update. But I would have thought it is not the processor overheating the fan must not be crank that quickly. My laptop is only 2 months old.

    The cooling fan is controlled by the fan table in the BIOS. Fan table contains information about the temperature and the fan speed that means the depands on some level temperature fan speed.
    Over all the possible game features as the CPU, GPU, produce heat and the heat dissipation is high
    Cooling modules would begin to turn faster if the temperature level would be exceeded
    This is nothing exceptional everything at stake

    > Also on a couple of times I got my screen briefly go black and then recover. A pop up appears saying something along the lines of the core of the graphics card.... Driver recovered. It flashes if fast, that I never see the entire message. Don't you think that something is wrong with the graphics card? (card nividia geforce gt300m)

    I read on a similar question, and apparently, the graphics card DRIVER crashed during games
    Maybe it's a compatibility problem between game and pilot
    In most cases the graphics card driver update should fix this and I read on some forums that it has helped in many cases

  • Satellite U500 - 11G - noise of the fan speed after BIOS update

    Hello

    I have the Toshiba Satellite U500 - 11G.
    I've recently updated the BIOS because my CPU fan did not work under Ubuntu,
    But after the update, my CPU fan speed is faster then normal and make a lot of noise (even if the CPU is cool) when I use Windows 7 is still stay on fast speed making a lot of noise.

    Do we sort of degrading the BIOS or thw way to earn the slow CPU fan speed?

    Concerning
    Sagar

    Update BIOS because of Linux? You know that Linux is not possible on this laptop model?

    In any case, to reduce the fan sped Please reduce the cooling in saving settings method.
    Control Panel > Power Options > go to your preferred power plan settings and choose advanced power options > Toshiba saving settings > cooling method > set to optimized battery.

  • The Y560 fan speed

    Hello

    is there a way to control the speed of the fan in y560

    due to y560 has no thermal management button (as I remember) it is not possible to control the fan speed.

  • Fan speed issue

    Hey I have a question and a problem on my computer laptop speed fan, first of all my features:

    Acer V3 571G

    Intel core i5-3210 m 2.5 Ghz

    GeForce GT630M 2 GB

    10GB Ram DDR3

    HARD DRIVE 500 GB

    Windows 8.1

    My windows and graphics card are both fully implemented to update later.

    So the problem is that my Fan will not rotate at the speed of ROTATION more fast can when my PC is turned on high temperatures.

    I use speedfan to monitor temperatures (even if you can't control the speed of the fan with it for laptops), the idle temp for my CPU is about 40-50 ° C and can can go up to 90 c during the game or after the games. what I do not understand why my CPU fan is not running at its RPM max, I thought he wasn't spinning on its RPM max when I rebooted my pc (to get into the BIOS) and heard the fan is running hard and fast when I stay in the BIOS, but when I get to the bios, he returned to his usual steady speed the laptop also cools extremely fast 90 c when I enter the BIOS after I restarted my laptop. My question is why the fan turning at this speed when my pc starts to heat everything at stake, or doing cpu intensive tasks?

    I understand that when you start the laptop the fan speed are not controlled but then they turn to the max until what the bios is used to control its speed or something like that, I tried to look in the BIOS for the fan controls, but I couldn't find anything, the Bios itself had so few things that can be changed essentially only security, time and boot order. My laptop can be old (2 years) but I'm sure its not clogged with dust or he wouldn't be spinning on max when I turn it on and go into the bios and Yes adding thermal paste and others could help, but I would like to bring the question about why it is not spinning on max when possible. I will soon get a new pc, but for now I'm just curious to know is this problem is controllable or not.

    any advice on how to control the speed or anything would be helpful, if you would like more information I will glady give more.

    Thank you

    Nevermind, I found a program that allows me to control
    in this forum: http://community.acer.com/t5/Legacy-Laptops-and-Netbooks/Fan-Control-Problems-With-5750G-And-similar...

Maybe you are looking for

  • I left my macbook pro on accidentally and now he's dead.  I have hurt the battery?

    I left my macbook pro on accidentally and now he's dead.  I have hurt the battery?

  • The update of the BIOS on Satellite L40 - 13G

    Hello everyone!I want to update my BIOS, but don't know how to do it. I looked at the instructions on a site: Option 2: update with CD-ROM 1 extract the zip file containing the BIOS upgrade to a temporary folder.2. in the folder temporary three subfo

  • No access to Motoprint after ICS Droid Razr Maxx

    After update to ICS, I can't access Motoprint. It is in my list of applications, and it is the only place where it appears. I hard rebooted phone without success and also updates installed and reinstalled them, rebooted again, hard things without suc

  • PersistentObject and signerId

    If you look at the documentation of the API for net.rim.device.api.system.PersistentObject, you will see an example like this: long MY_DATA_ID = 0x33abf322367f9018L; Hashtable myHashtable = new Hashtable(); PersistentObject persistentObject = Persist

  • Customizing Acrobat and activex Dll Wizard

    Hi, I want to deploy Acrobat Reader DC with SCCM, it works, but I need to modify a dll named AcroPDF.dll wich is in C:\Program Files (x 86) \Common Files\Adobe\Acrobat\ActiveX because our soft use the other oldest.So, with the wizard change AcroPDF.d