Controller issues

Similar Questions

• 6.1.2 NSX - v > controller issues > not enough space

  After the judgment of any infrastructure for the maintenance of the equipment, it seems that the only thing that will not come online are the controllers of the NSX. The power, but after some CLI research and troubleshooting, all my controllers are "out of disk space. I tried the clear commands (less orders that wipe configurations) but output shows that delete commands are not able to remove non-essential files because there is not enough to place. I published 'show status' and I get a 0% for available disk space. Thoughts?

  

  

  Update:

  Fortunately, one of my controllers was still in a State of good "joined". Finally, I fixed my problem by deleting my other two controllers and their redeployment. I noticed that when the deployment of a controller to one or two hosts, he continued showing that I don't have a cluster to join to the. So I transferred two other controllers to a single ESXi Host which was not giving the error. My problem is now solved and my controllers are all watch 'connected '.

  Note, the original controllers that have been posted as disconnected, after diagnosis, I noticed that when the virtual appliance restart (controllers), an error message showed [host SMBus controller not activated] during the starting process of the virtual appliance of the controller. After issuing the command [view status], I could see that the system partitions (mount points) were not present. After redeploying the controllers a second time, everything seemed to work.

  to clarify, I transferred the cluster 3 times. My original problem was to power the NSX, the controllers for a reason infrastructure any ran out of disk space and could not start properly. After the reconstruction controllers, I ran into issues with the controllers SMBus host does not, leading virtual disks to not be charged (where mount does not point towards the top... Since the virtual machine couldn't connect to them). After a 2nd reploy, I came across the 'no cluster to join' error, which has been resolved with redeploy controllers on a good host. Now that my controllers are all deployed and synchronized between them, I am able to vMotion controllers on all hosts.

  Post edited by: James__M
  * the clarification dialogue added at the bottom of the post

• NVIDIA nForce Networking Controller issues

  I have a hand built system running Windows XP sp3. It does not recognize one of the pilots who strives to update and suggested I have uninstall and then try to re - install. In doing so, he made sure I can't access the internet. After having diagnosed the problem, I found that it was disabled and uninstalled my NVIDIA nForce network controller. When I tried to re - install, it says that I need an installation disc. I don't have a disc, so I contacted NVIDIA. They informed me that they offer no support for this controller when part of a card mother and suggested that I contact Microsoft. Can someone help me find an installation disc, or suggest that I could do to make this work?

  Hello

  You can probably download the drivers from the support page for your computer.

  Or maybe it will work for you, http://download.cnet.com/NVIDIA-nForce-Networking-Controller/3000-2112_4-143144.html

  If during the installation, it offers to install the nVidia firewall. JUMP.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Unable to connect to the internet, NVIDIA nForce Networking Controller issues

  The NIC 'NVIDIA nForce Networking Controller' experiences driver or hardware problems... the message that I get when trying to connect to the internet.

  In under 'Network adapters' Device Manager double-click your network adapter, in the, click the tab drivers, click on the button 'Disable', properties when disabled, click 'enable '.

  You can also try the "Uninstall" button to uninstall. Then on the Action menu click on "Scan for hardware cahnges ' of the reinstall.

• Portege R700 - slow DVD burning

  all of a sudden for some reason any CD/DVD burn on my new Portege R700 has almost ground to stop. It worked fine initially, but now won't have high peaks of 1 MB/sec... it is a REAL pain...

  The problem occurs with both the DVD player built-in and a USB connected drive that has worked well for years, so there must be a problem with o/s or H/S any. am about to update the BIOS but with no real hope

  I did some research on Google and things seem to point to the IDE controller issues. I took some advice and remove / reinstall the controller, but to no avail...

  someone else has the same problem - or, more importantly, a solution please?

  in some desparation

  Tim

  Hello

  not easy to say why it is burning so slow. have you tried burning with other discs and programs?

• Satellite L300D-135 - some keys stop working after a few minutes

  Satellite L300D-135 (PSLC8E-02P013EN) portable model, boot cold keyboard is fine. As things warm up the keys R and there stop responding as do 7890 keys. May be heat related.

  The keyboard has been replaced, old and new are doing the same thing, so it's more like a controller issue. Have flashed the latest BIOS as saw talk of the keyboard problems in one of the versions of the BIOS. The end user has been tolerated for a few months, but now, Dyslexic child needs to use the laptop and cannot deal with dead keys.

  Any ideas? Laptop is 2 weeks out of warranty and user end just asked me to take a peek, problem has been around for the warranty period.

  Phil

  Hi Phil

  Can you notice the question even if you connect an external keyboard or this only happens with an intern?

  I can t imagine it has something to do with the heat, but if you want you can clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.

  If this isn't the case, you must replace the entire keyboard. Normally it of not so expensive so Don t you worry not about it. You can also ask your ASP if they can repair as a gesture of goodwill.

• Satellite C50-A-15 q - arrow, question mark key and key z do not work

  I have a Satellite Pro, C50-A-15 q. All the keys worked fine yesterday, today I turn on the laptop, and arrow keys, point of interrogation and the z key are all unresponsive. No idea how can I fix?

  I tried to turn the laptop on, in hopes (naively) that this difficulty, but in vain.

  > No idea how can I fix?
  First of all it of needed to know if his problem keyboard or motherboard (keyboard controller) issue.

  In this case an external keyboard must be connected to perform these checks.
  In case the external keyboard would work properly, the internal keyboard of fault and needs to be replaced.

• T420s black screen and no boot

  Hello everyone,
  I hope someone could help me with this problem
  I have a T420s that I bought a few weeks earlier, it's a used, so there is no guarantee with it, I used it several days without any problem, I do not use very often I use my business an alone most of the time.
  One day when I tried to turn it on, it stacks on a black screen and it beeps a beep then two other, nothing show on the same screen not the logo of thinkpad at the start, I thought it was a RAM issue about so I put my PC business, but without a bit of luck, so I wanted to see if his graphics controller issue I plug the VGA on laptop and my TV cable, and here I see boot thinkpad logo but after that I see a message on the screen saying: "real time clock error - control of Date and time settings." Press ESC to continue or F1 to enter setup"and when I press either nothing happen at all, always there batteries.
  I'm lost here, can anyone help please.
  Sorry for my bad English.

  It is used, it does not mean that there are no guarantees. If it is sold, the warranty stays with the machine. Check here first:
  http://support.Lenovo.com/en_US/product-service/warranty-status/default.page?

• CFS3, FS2004 engine controls is no longer function

  I have three Microsoft Flight Simulator games: FS2004, CFS3 and offspring, on the field of honour. Suddenly, no reason that I can find, for all of the foregoing, the default engine controls, as well as the stick, stopped working after several years of operation perfectly. I play as the Flight Simulator for the HE-2 from Ubisoft, and works still as good as ever. The problem does not lie with the joystick. I have three and all the function for IL-2.

  Hello

  Have you been able to play the games on Windows 7 with the joystick even earlier?

  You can view these items in the KB for help:

  Combat Flight Simulator 3: how to troubleshoot joystick:

  http://support.Microsoft.com/kb/811463

  Flight Simulator 2004: Known game controller issues

  http://support.Microsoft.com/kb/823631

  Description of the troubleshooting tools that are installed in Flight Simulator 2004 - A Century of Flight:

  http://support.Microsoft.com/kb/894733

  Flight Simulator: How to stop or start Jet engines:

  http://support.Microsoft.com/kb/179122/en-us

  For more assistance, you can contact support centers:

  Combat Flight Simulator 3 support:

  http://www.Microsoft.com/games/combatfs3/support.aspx

  Support of Microsoft Flight Simulator 2004:

  http://www.Microsoft.com/games/PC/FlightSimulator.aspx#support

   

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Errors of diagnosis Vostro 400 problems screen has black 1100:012

  Afternoon, I'll have a nightmere of problems with one of our Vostro 400 workstations. Running Vista Business SP1 and after 4-5 hours, it crashes - goes to a black screen, sometimes with the power light flashes. When I managed to restart the turn table has checking (RAID 1 of Dell). I am running diagnostics extended utility partn. He has so far thrown upward the following errors on the disk SATA test 1100:012 A 1100:022 A 1100:032 A and 1100:042 A.

  Disk with a hot fault or controller issue?

  Covered by the 3 year warranty so I sound Dell once the tests have completed.

  I was just wondering what I'm against here, bit cheesed off because I expect the system to continue, because the RAID 1 configuration is sold.

  TIA.

  Paul

  
  

• Issues of recovery site: domain/Vcenter controller

  Guys,

  I'm new to SRM.  I have a few questions about the installation of the infrastructure of the Dr site.

  1. my vcenter protected site is broken out in distinct roles, VC/SQL.  On the site of recovery for the sake of simplicity, that I would just have a single VC with SQL Server express.  Guys do you see any issues with that?

  2. what should always live on the site of recovery from the point of view of the infrastructure?  Do I need a domain controller or can I just add my server to vcenter Site Recovery at existing on the protected site domain controller?

  Thanks in advance,

  Ian

  Hello

  You should have AD / DNS server to the recovery of the site as well. If your vCenter / SRM are joined to the domain, it will be difficult for them to communicate / authenticate.

  Michael.

• Issues with the controller of Siri

  I got the last Apple TV since Christmas, and lately, it seems that I might have a problem with the controller of Siri. When you place your finger to use the contact surface, for that one click-much like the glass mini is not defined in law if that makes sense.

  Does not really affect the operation but is off-putting. If you want to just to click and press down, basically click twice on it records only one. He did not have it to begin with and has not been abandoned or anything - is always in perfect condition. Don't know if anyone has similar problems or if I have an error with mine?

  Sounds like it is damaged or defective for me

• HP Pro 3400 MT, network controller driver issues.

  Hello

  I recently got a HP 3400 Pro mt (ProductNumber: LH121EA)

  I installed a fresh Windows7 on the computer. When you start installing drivers, I got stuck on the network controller.

  It seems that the driver is downloaded from the HP Web site, is not compatible with the real network controller?

  I've been tryin to find more info on the web, but couldn't find anything special about it.

  I hope someone here can help me out.

  Kind regards

  Sébastien

  You; Re welcome, Sebastian.

  The device ID you posted shows network controller to controller Realtek PCIe Gigabit Ethernet family.

  Here is the link to the driver for him page direct from Realtek. Download and install the driver that is 5th on the list

  (Win7 and WinServer 2008 R2 Auto Installation Program (SID: 1483418))

• Network HP655 for laptop controller - Wifi issues.

  Hello

  Just reinstalled windows 7 on my laptop HP 655. But I can't get wifi running, LAN works fine. Should which driver I for the Wireless (network controller) card?

  See the attached images.

  

  

  Thanks for the quick responses.

  The driver that works for my hp655 is.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=NL & LC = NL & DLC = NL & softwareitem = ob-113567-1

  Thank you!

• issue of video controller on my t43

  I have an IBM Thinkpad T43. He had WIN XP on it. I've migrated the OS for WIN 7. Now my video controller requires a driver for it. I searched the web for a driver without success. Can someone help me find a video controller WIN 7 32 bit 64 bit for my thinkpad driver please? My email is [email protected]. Thank you for your support.

  Yes, that's what I was looking for.

  There is no driver support for Vista/W7 for integrated graphics Intel on T43. You will need to search the Web for a modded driver.

  This thread may be useful:

  http://Forum.ThinkPads.com/viewtopic.php?f=2&t=114712

  Good luck.