6.1.2 NSX - v > controller issues > not enough space

Similar Questions

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• iPod cannot be synced because there is not enough space

  I just got a new computer and I tried and tried to sync my ipod touch, product type is: Ipod 3.1. and iOS 5.1.1. on the new computer. I have all the songs from the old computer and their transfer to the new computer, but I get the error message "Ipod cannot be synced because there is not enough space to hold all of the items in the itunes library (like 55.88 GB required). This computer now has a lot of hard drive to contain this music, and my ipod has a capacity of 57,92. Now, if I think right, it's almost an ipod everything! I'm so confused by the present. I have not added a lot more music. Please explain and help me understand what I need to do to get my ipod to sync. I tried to reduce the bit rate only to get the error saying that I need extra GB 38.65. What happens here? Help, please.

  Now, if I am not mistaken, the songs that you have in the itunes application, is what gets synchronized, I have additional music in other folders, but I don't have them uploaded to the app. Are they still in the library? Please help me not to be confused on this issue. I greatly appreciate it.

  Thanks for any help you can give me.

  Steve

  You try to synchronize too much media to iPod.

  Verify that synchronization of the settings

  iTunes: synchronization of multimedia content for iPod and iOS devices

  Try the synchronization using the manual method

  Managing content manually on iPhone, iPad and iPod

  You can synchronize only with a computer. To move computers

  Synchronization to a 'New' computer or replacing a hard drive "crashed": Apple Support communities

  If all the media synchronized music and apps are already in the iTunes library of the new just backup on iTunes computer and restore from this backup.

  iOS: backup and restore your device iOS with iCloud or iTunes

• on the backup, I saved D recovery and it stopped due to 'not enough space. / have I saved in the wrong place?

  I backed up my computer and it went to recovery D but it has stopped backup because of the "not enough space" How can I handle this?  I'm new on this.

  I backed up my computer and it went to recovery D but it has stopped backup because of the "not enough space" How can I handle this?  I'm new on this.

  dodieZONAKIS DDS,

  Your question [on backup, I saved the D collection and he stopped due to 'not enough space.] [/ have I saved in the wrong place?] (<-- that="" is="" a="" link="" you="" may="" click="" on="" to="" get="" back="" to="" your="" original="" question)="" has="" been="" marked="" as="" answered,="" only="" you="" did="" not="" mark="" it="" as="" such="">Rob.C a.]

  I feel compelled to ask whether and how you solved your problem?

  The marked answer * not * have one you used and for the benefit of those who might ask the same question in the future it is better the original poster mark their own answers, in my opinion.

  If you feel that your issue has been marked as answered by mistake (the answer does not match your need or your fix) then please, deselect as soon as POSSIBLE. I am including instructions on how:

  You can go to the answer and click on the following to stand out as a response.

  

  If you are able, please go back to your original question and that everyone knows how you solved your problem, if you have and mark the answers correctly. This initiative will help to close the question properly or help us to help you if you still need help.

  Thank you!

• The host has not enough space on the boot partition to store the image upgrade. It takes a minimum of size_in_MB. After the release of space or perform an installation from the CD-ROM.

  Hi everyone, the difficulties in trying to update the Update Manager. ESX4.1 to ESXi5.0

  Error I get is below to correct the scan before update:

  The host has not enough space on the boot partition to store the image upgrade. A minimum of 299MB is necessary. After the release of space or perform an installation from the CD-ROM.

  There is enough space in the local disk

  Size of filesystem used Avail use % mounted on
  / dev/sdd5 4.9 G 1.6 G 3.0 G 35%.
  / dev/sdd2 2.0 G 107 M 1.8 G 6% / var/log
  / dev/CCISS/c0d0p1 99 M 67 M 27 M 72% / Boot
  / dev/CCISS/c0d0p2 4.9 G 1.6 G 3.1 G 34% / esx3-installation
  / dev/CCISS/c0d0p1 99 M 67 M 27 M 72% / esx3-installation/boot
  / dev/CCISS/c0d0p7 2.0 G 101 M 1.8 G 6% / esx3-installation/var/log

  Cannot continue installation due to the lack of space and don't have the option upgrade CD directly (of complicated issues)

  Do you have any suggestions?

  Thank you

  It sounds like this host has already been improved 3.x! In this case you will not be able to upgrade to 5.x using the Manager to update because of the small partition/boot (99 MB).

  to remedy the hosts against a basic upgrade

  ... You cannot use Update Manager to upgrade to 5.0 ESXi host, if the host has upgraded ESX 3.x to ESX 4.x. These hosts have not enough free space in the partition/Boot to support the process of update Update Manager. Use either interactive or scripted upgrade.

  André

• IOException: error = 12, not enough space when the duplication of external process

  Hi all
  
  I've encountered the question as:
  
  java.io.IOException: cannot run program "/ usr/local/bin/sudo ': error = 12, not enough space
  at java.lang.ProcessBuilder.start(ProcessBuilder.java:460)
  at java.lang.Runtime.exec(Runtime.java:593)
  at java.lang.Runtime.exec(Runtime.java:466)
  ...
  Caused by: java.io.IOException: error = 12, not enough space
  at java.lang.UNIXProcess.forkAndExec (Native Method)
  to java.lang.UNIXProcess. < init > (UNIXProcess.java:53)
  at java.lang.ProcessImpl.start(ProcessImpl.java:65)
  at java.lang.ProcessBuilder.start(ProcessBuilder.java:453)
  
  When I tried to call an external script by Runtime.exec. I checked the physical memory and swap, two of them were more than 2 GB at the point where the exception was thrown. The same exception was thrown by the other processes external duplication of wire...
  
  Everyone please throw me some lights on this issue? I have seen no exception OutOfMemoryError either from my application.
  
  Thank you and best regards.

  You're out of swap space. Nothing to do with local memory, heap, OutOfMemoryErrors, etc.

• ORA-273xx OS OS system error message: not enough space in CAR 11.0.1.7

  Hello world
  
  We have Oracle RAC on HP - UX 11.32 with two knots after a while that one of the nodes had shot and you cannot issue an order until the server is restarted.
  
  
  Here is a log of messages in the queue alerts.
  
  ERRORS
  =======
  Process m00D died, see the trace file
  Boot process failed, error of the battery:
  Errors in the /u01/app/oracle/diag/rdbms/ecmprd/ECMPRD2/trace/ECMPRD2_psp0_9389.trc file:
  ORA-27300: OS dependent operating system: fork failed with status: 12
  ORA-27301: OS Error Message: not enough space
  ORA-27302: an error occurred at: skgpspawn3
  M007 died the process, see the trace file
  
  
  
  Trace file
  ============
  2011-01-18 15:03:19.980
  Boot process failed, error of the battery:
  ORA-27300: OS dependent operating system: fork failed with status: 12
  ORA-27301: OS Error Message: not enough space
  ORA-27302: an error occurred at: skgpspawn3
  
  2011-01-18 15:13:20.135
  Boot process failed, error of the battery:
  ORA-27300: OS dependent operating system: fork failed with status: 11
  ORA-27301: OS Error Message: Resource temporarily unavailable
  ORA-27302: an error occurred at: skgpspawn5
  
  
  
  I think it's the limitation or problem of operating system kernel. no luck that we stuck with bad engineer as we took a week, but no action until now I try now he climbs, we open bu SR.
  
  Anyway any idea that will really help
  
  DB v 11.1.0.7
  
  
  Thank you

  Hello

  See the TechNote MOS:

  * Troubleshooting error ORA-27300 ORA-27301 ORA-27302 [579365.1 ID] *.

  Thank you
  A H E E R X

• Time Machine-not enough space error

  Hi all

  I had to unplug my computer and move it to another room and now after all hang up, I get this message "not enough space for full backup". There are about 150 GB to 2 TB disk space as it is filled with iTunes and Time machine backups.

  I guess it's because ever since I hooked everything back up Time Machine think it is made the first backup of everything rather than pick up where he left off when he made the last backup?

  Please tell me that I shouldn't let it save it for the first time again. It took an eternity to accomplish this last time as the computer kept going to sleep.

  Thanks for any help,

  Al

  Start with 18 in the 1st article linked.

  Troubleshooting of Time Machine

  Solving the problems of Time Machine

• Bad burn on Blu - Ray; not enough space?

  Hi all

  I bought a blu ray burner =:

  http://www.bhphotovideo.com/c/product/1051647-reg/samsung_se_506cb_rswd_sam_slim _exterior_blue_ray.html

  Create the disk opens its doors to about 66% asks me to insert a disc. The project is only about 3 minutes. long.

  Then, at some point, I get the error message; "Not enough space on the startup disk.

  Once the error was; not enough space on the disk, but it's a Virgin blu - ray disc. (BD - R)

  There is plenty of space on the hard drive of my iMac.

  The burner did not come with software to Mac but I chose the burner in the FCX share window.

  Other: When I right click on a movie on the desktop file I see an option for burning, but where can I say it blu - ray?

  Thank you

  Al

  Is the library of the PCF on your startup disk and where the media is stored?

  If you burn a movie from a file in the Finder, it is a data disk and will not readable on a Blu Ray player.

  Russ

• Backup Restore Time Machine: not enough space

  Hi all, I am a neophyte tech so forgive me if I'm not clear. I will try to explain the problem as best I can:

  I have an old MacBook 2009 running Mountain Lion. A few months ago, my brother gave me his old Pro and so my MacBook 2009 fell by the wayside. I used an external hard drive with that old computer as my backup time machine, but as I tried to transfer a lot of documents and photos and update of dropbox and download photos of google and to understand each of these things as I went along, I totally messed up the MacBook. Just... things are weird... nothing was, where it used to be and my photos were gone and Yes, much of this is probably down to me trying to understand a bunch of new programs at once, BUT what I want to do is to restore it to the way it was using a time machine backup.

  So, I googled around and I know when I start it up until I'm supposed to press Ctrl + R and choose the backup that I want, but when it gets to the part where I select a destination and click the only option (the Mac HD), an error message appears with a yellow flag saying "this disc is not enough space to restore your system.

  Now, I don't really know what that means, but what I want to do is to get rid of the current way, this computer is completely and attach it to the way it was when I did the last Time Machine backup.

  Someone help me please... this stuff is so frustrating when I can't figure it out for me and I am sure that there is an easy solution. I read a lot about partitions etc. but I don't know what all of this means that even.

  Thank you in advance!

  Alexandria

  Boot into Recovery now command + R to start. Choose disk utility and erase the boot volume, it should be named Macintosh HD, unless you renamed it. When the erase is quit disk utility and choose to restore from your Time Machine backup. OS X: on OS X Recovery - Apple Support

• Not enough space in Runtime area. Data not available SMBios. Inaccessible BIOS

  Hello, I was trying a restore or Windows 7 install on a p6510y for a friend. Tried going into the bios to select which device to boot from.

  I hit F10, it says enter the bios or enter the configuration..., then it goes to a black screen with a blue bar at the top. The blue bar is bright blue in the middle and it fades to the edge of the screen. It is not animated. I see no text or the cursor blinking either.

  If I do not go into the BIOS, I get the message "not enough space in Runtime area. SMBios data will be unavailable"and if I hit F2 to continue, windows starts normally.

  I stripped the system down to a single stick of RAM, tried a different PSU, graphics card, vga cable, etc.. I removed the cmos battery and flies over the rider for a solid 30 mins. I can not even access the bios.

  It's a machine extremely strongly virused, I was able to install Windows 7 via disk external drive bootable. The recovery partition is still intact, although it seems empty, still too much space.

  I ran sp49851.exe in windows 7 on the machine, the installation has been apparently successfully, but the BIOS always behaves in the same way.

  I am at a loss, have spent many hours in checking these forums of discussion, does not. Is it possible for me to prepare a bootable USB key and manually install the bios? I extracted the contents of the exe to a folder but I don't know what to do next. The computer has a floppy drive port. For any help or suggestion would be greatly appreciated. Thank you in advance!

  I was able successfully to Flash the BIOS manually, and it behaves as it should. Here's what I did:

  I extracted the contents of my bios file (sp49851.exe), using a program called Universal Extractor.

  I renamed the file alo6.09 to bios.rom (this was the only file required)

  I followed this guide:

  http://www.BIOS-mods.com/BIOS-update/

  Make SURE you get the HP USB Disk Format Tool, they provide a link.

  Make SURE you get the BACK image they provide a link for.

  I used AFUDOS for my AMI BIOS, from which the above ROM file extension. (they provide a link to AFUDOS)

  I used the command line afudos bios.rom/p/b/n/c/e/k/q/reboot (EXACTLY) how they said.

  Went straight into the BIOS, was able to make changes. System seems to work fine. It is very important that you read all of this guide and be absolutely sure that you have the good BIOS before updating. Thanks for the help Dave!

• not enough space in my photo library

  Im getting this message "not enough space in the library". How can I safely back up my photos on external hard drive to the top. Thank you.

  Also applies to Photos.

  iPhoto: move your iPhoto library to a new location

• Re: Satellite U500 begins with the "not enough space in runtime area» message

  I have this message at the start of my laptop U500-17: not enough space in runtime area. And after that ask me to press F1 to continue, but nothing happen, and start the windows does not work. I'm trying to get into the Bios, but I have some error and nothing happen. What should I do?

  In my opinion, you need to contact the nearest Toshiba service provider and ask for help. I'm afraid that your BIOS is troublemaker and they should Flash the BIOS of Mr. Unfortunately, you can not do this alone.
  For owners of Toshiba laptop offer updates of BIOS Win only. With other words, it can be started as a small application for Windows operating system running.

• Not enough space

  We have an iMac and MacBook 2 backup on a capsule 3 TB. It now says not enough space. Should it not be automatically delete older backups to free up space. I have to start over and do a back up of all three computers?

  About alert TM "Backup Drive is full"

  TM only deletes older files if they have been removed from the source and when TM needs space on the backup to a new incremental backup drive. Time Machine "Jules Destrooper" its backups. over 24 hours, old backups, except the first of the day; These "dailies", old more 30-day backups, except the first day of the week. The weeklies are kept as long as there is room.

  So, how long a backup rest file depends on how long it was on your Mac before being deleted, assuming that you do at least one backup per day. If she was there for less than 24 hours, it will be maintained for at least a month. If she was there at least a week, it will be maintained as long as there is room.

  Note that, on a Time Capsule, the sparsebundle grows in size as needed, but not descended. View of the user of the TC so it seems that no space was released, although there may be space in the sparsebundle.

  Once TM has found that it cannot free enough space for new backup it reports the disk is full. You can erase the backup disk and start your backup or replace the disc with a larger drive.

• HP Jet x 360: not enough space for the full Windows 10 upgrade

  Just got a HP x 360 for my granddaughter stream.  Indicates its eligible for the upgrade of Windows 10.  When I try to install it through the process, but before it ends and the error comes up saying not enough space. I have to add memory and if so, how.

  Monkey,

  The computer may be running out of physical space required for migration instead of memory needed to actually to crunch the numbers and run the migration program.

  The migration process uses more than 10 GB of space on your computer.

  Please take a look on the following document, including the important notes section.

  Specifications for Windows 10

  Excerpt:

  • Latest OS:

    Make sure you run the latest version of Windows 7 SP1 or Windows Update 8.1.

    Don't know what version you use? Click here to find out. Need to download the latest version? Click here for Windows 7 SP1 or Windows Update 8.1.

  • Processor:

    1 gigahertz (GHz) processor or more fast or SoC

  • RAM:

    1 gigabyte (GB) for 32-bit or 2 GB for 64-bit

  • Hard disk space:

    16 GB for 32-bit OS 20 GB for 64-bit operating system

  • Graphics card:

    DirectX 9 or later version with WDDM 1.0 driver

  • Display:

    800 x 600