Controller of active/active storage and ESX 3.5 U4

Similar Questions

• Active Directory and domain controller on old customer Windows 2003 and Windows 7.

  Hi all

  I have Active Directory and the domain on old Windows 2003 and Windows 7 client controller. I enabled "User must change password at the next logon" for the customer user on AD account.

  When the user tried to connect to Windows 7, after that they have got the change password screen and type new password, then they received message "the user password must be changed before logging on the first time," user get password screen change again, then they get the same massage. Looks like he's going to loop and user cannot change password and connect to the computer.

  Hello

  To help you with your concerns, you can see the article below:

  Error message: the password must be changed before logging on the first time

  Let us know how it goes.

• How many active paths by a LUN on the controller use Active/Active array.

  Hi all

  I have a symmetrical controller active/active table and two HBAs on the host ESXi (also two SAN switch).

  In this case, I have 4 paths per LUN, right!

  I wonder how active paths by a logic unit number exist at the same time, when I put the round robin PSP.

  and also how much marketshares of controller active/active table against active-passive array controller in production about.

  Thank you all.

  VAAI provides a provisioning also with many other functions.

  Discount in State of TP is disabled ESXi5 U1 and more, due to the performance bugs (bad enough). See the following KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2007427

  It is rehabilitation possible storage when I delete some files on the virtual machine (not delete any VM storage vMotion)?

  No - TP reclaramtion only works on removing a VMDK set.

  In other words, VAAI with Thin Provisioning supports retrieval based on storage when vDisk VM has been diminished?

  N °

  If so, how VAAI note thereon made vDisk was decreased?

  This isn't.
  

• Keithley 6485 error 800, "not consistent with active storage."

  Hello

  I use a Keithley 6485 to acquire a buffer of 40 measures, triggered via triggerlink.

  The VI works well, but of course, what happens if no trigger is to send to the device?

  So, after a timeout, the unit is configured again (reset and configuration commands).

  This is then the error produced responses from the instrument: '800, 'noncompliant with active storage' '.

   

  The source is that there is always an active storage (visible on the screen) and I try to reconfigure the buffer.

  Here: http://torque.oncloud8.com/archives/cat_keithley_6430.html

  I found a way to leave the mode of storage of the façade:

  When debugging of labview for the 6430 programs, you could get stuck with a "noncompliant with active storage" error This occurs when the aircraft is expected store data, but you try to give orders that change, for example, the size of the buffer. I have to admit, when I first stumbled across this, I am frustrated and rebooted the machine. The "Asterix" in the upper right corner indicates use it is in storage mode, where the error. Out of this, you must not turn off the machine. Simply tap LOCAL (to get out of the remote control) and then the STORE and then LEAVE. Phew.

  Can someone help me on how to do that through SCPI commands?

  I've tried Keithley support of the Netherlands, but they don't have an idea.

  THX,

  Ben Engelen

  Support of the keithley guys gave me a work around the problem: use the controls of the SCPI to push buttons.

  so before you send the reset command is send to the following:

  YST:KEY 28;     -store the button
  YST:KEY 32;     -exit button

  : * RST;                  -reset

• Can I buy an activation key and use the Windows 7 Upgrade disk to upgrade to Windows 7?

  CAN I BUY AN ACTIVATION KEY AND USE MY OLD DRIVE TO UPGRADE TO WINDOWS 7 UPGRADE FROM WINDOWS XP?

  Yes, you can:

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information help please 91026128

  I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information and I called apple, they said that its nothing they can do without evidence of perchise im broke I spent all my money on the phone, does anyone know any software free or something me please txt to 9102612856

  @Santonio99

  You probably bought an iPhone stolen 6. Mine was stolen in Barcelona in Spain on June 10 by a pick-pocket. Fortunately, there is absolutely nothing you can do to make an iPhone locked to the activation of the work.  You have a paper weight.

• I have a new idea called (active safety) and would be happy if I can have apple as my sponsor because the idea is new and I have a great expectations most apple applications will be part of my idea. So who can help? who should I contact at apple?

  I have a new idea called (active safety) and would be happy if I can have apple as my sponsor because the idea is new and I have a great expectations most apple applications will be part of my idea. So who can help? who should I contact at apple?

  Apple does not project sponsor, but you can contact Apple directly here > http://www.apple.com/contact/

• You can use the activity tracker and an application running at the same time?

  I've been running just with my watch and the Apple activity tracker.

  But I wanted to calibrate so tonight I ran with my iPhone, too.

  I tried to use the Nike + and the PPP of activity both starting on my watch. I ran with the application of the activity on the screen.

  When I did I stopped the activity app and went to the Nike + app, but it was stopped.

  Then can you run the application of activity and a different running application at the same time. Or do you need to start another app on your phone and activity on your watch?

  Thank you all

  Hello

  To save your route at the same time apps, save the workout using the application of the workout on your Apple Watch (early check it there first) and also through the application of Nike + running on your iPhone.

  Monitoring of your training via the integrated application of the watch workout will cause your heart rate to be monitored at all times for the duration of your workout.

  The app Nike + running cannot currently access heart rate monitor watch directly, but if I read the heart rate data of the health on the iPhone app, it will always be able to access - indirectly - the same heart rate for your exercise data:

  -On your iPhone, in the application of health, press Sources (tab) > Running > turn on Allow 'Running' to read heart rate data.

• The application of health on my new 6s shows "no data" power, active energy and stand hours of rest.

  Health app shows "no data" power, active energy and stand hours of rest

  Hello, Mjalderman.

  Thank you for visiting the communities of Apple support.

  I understand that some application of health data is not followed.  Looks like you don't have a device such as an Apple Watch or similar tracker connected to your iPhone 6s.  You would need a type of source or fitness tracker to collect these data before it would show in these categories.

  Collect health and fitness

  Manage the health data from multiple sources on your iPod touch, iPhone, or Apple Watch

  I have included a few options of our Apple store to give you an idea of what is needed to keep these categories.  You are not limited to these options.

  Fitness Tracker

  See you soon

• Why do I get a message "software you are installing has not passed Windows Logo test, such as Legacy Driver, Activity Monitor and driver plug-and-play

  WY the message about not to test the Windows Logo on these drivers as follows: Legacy Driver, Activity Monitor and no plug-and-play drivers

  Hi John,.

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved. Please provide us with some answers before proceeding.

  1. when exactly you get the error message?

  2. are you aware of any changes made to the computer before the show?

  This type of error message arises usually when the driver that you are trying to install has not passed the Windows logo test or is not approved by Microsoft.

  Here is a link with a few steps of good to help solve problems like yours. Go through the steps from 1 to 10 and check if that helps.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated.

  Windows XP Activation loop.

  When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated. All I can do is, click 'OK' and he takes me into a log on screen with my name on it and goes through the same process, as described at the beginning of this statement. I'm in a loop. The only way out is to wipe my hard drive and reload windows new who, within 30 days, it will do no doubt once again. How to do this?
  For 3 years I rebooted my computer. That's why I reloaded it in the first place. I sent this version of Windows XP by Microsoft and have recharged the system at least 4 times in the past 10 or 11 years.

  Ken

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer:

  http://support.Microsoft.com/kb/312295

  Hope this information is useful.

• Windows Vista active again and again

  * original title - Windows Vista active more and more and more and (you get the idea) *.

  for 3-4 months, at least once or twice a week (currently twice now with 3 days now) VIsta started in a black screen, stating that "this copy of Windows is not genuine" with a dialog box indicating the Activation succeeded.

  Why Vista has suddenly decided to activate so often? OS is fully legitimate, fully serviced, all the installed updates blah blah.

  As such, I have no problem with the activation screen popping up, my main concern is if the activation of MS servers decide my product key was activated too many times and decided to tell me to go away (to say politely!), which would be pretty annoying because nothing on my hardware spec has changed over the last 4 months , and the only significant change was a year ago when I upgraded my HD because of an impending failure alert (SMART State). RAM, processor and motherboard were the same items from the first installation.

  Should he help diagnose etc. machine spec is:

  "Northwood" Pentium 4 3 GHz FSB 533 Mhz processor

  ASUS P4P800 Deluxe

  2GB DDR1 Geil

  NVidia 7600GS AGP 512 MB iirc GPU

  1x500GB (OS) & 1x1TB (data) in a box Seagate HD with a 330 GB Seagate external LaCie firewire.

  Thanks in advance

  Dave

  "Dave400" wrote in message News: fa7b96bc-8316-409b-81b6-21fc3aecb521...

  Not quite the answer to what I'm asking, system started, decided to reactivate and confirms thus reactivated, I want to know is why he had to reactivate again and again and again...

  This can be caused by a number of things - usually an anti-virus scan of the system at the same time that the licensing service is trying to verify the activation status.
  Nothing to fear (usually) - but if it persists, or the notification remains standing, you should run a report of MGADiag (when the notification is displayed) and post it here.
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• I can't find my activation key and I think it's on an old email that I can't access, what can I do? (apart from pay again anywhere for windows 7)

  I can't find my activation key and I think it's on an old email that I can't access, what can I do? (apart from pay again anywhere for windows 7)

  I had to re - install Windows 7 due to an error that did not allowed me to start vista only windows 7, since I still had the download file win7 I re-installed, I wasn't expecting to ask for the key once more, but I can't.

  If your purchase of Microsoft Store contact Customer Support:
  http://store.Microsoft.com/Help/FAQ?Err=T2#AT2

  Digital River Oders: www.findmyorder.com
  (pick up your order or login to your account)

  Patricia J W: http://www.pagestart.com

• relationship between the active layer and enable layer

  I use AE CC 12.2.1. I think that is not specific to the AE version but something general.

  When I read my layer by extendscript property, it shows layer.enabled = true and layer.active = false. If I change layer.enabled from false to true, the active property seems to follow the enabled property also.  I don't know the meaning of 'active', because even layer.active = false, there is no problem to manage the layer in AE.

  I would like to know something.

  1. How do the status layer.active to AE UI even I check it in the source of the script?

  2. What is the difference between layer.active = false and true?

  3. What is the relationship between the layer active and active layer?

  Thanks in advance.

  [Moved to After Effects - moderator script forum]

  In general, a layer is activated if the eyeball is on in the timeline panel. It is active if the layer is activated and that the model currently is between the points layer and output. You can control the active state. The active state is determined by the active state, in and out of the points and the current time.

  There are some exceptions (audio layers, other layers prone, etc.), but that's about all.

  Dan

• Acrobat Pro DC will not be installed. Goes to 64% and close unexpectedly. Left Safari in the activity monitor and download yet.

  Acrobat Pro DC not download and install. Get to 64% and close unexpectedly. Left Safari in the activity monitor and still only goes to 64%.

  Robert, please try: Quick SafariNotificati nearby Installation

  Atul_Saini