Controlling agency group

Similar Questions

• How controls are grouped in the front pannel "write basic series and Read.vi.

  I wonder how the controls are grouped on the front. An example is the "basic series write and Read.vi. The rocker of Scripture and the 'rope to wirte' are grouped in a raised area. I couldn't move individual out of this box control when I tried to arrange the controls. How they are grouped and how do I move them individually?

  Thank you.

  

  Select the Group of controls you want to Group/Ungroup and select the option group/ungroup as shown above.no wonder in this

• For your security, some settings are controlled by group policy

  I want to install Security Essentials.
  I am running XP HOME Edition Service Pack 3 on 2 computers on a network at home for almost a year. I have One Care. When I start the computer their direct initialization on the desktop.
  I know that I don't have the Group Editor and there is no way to get installed it on XP HOME.
  For the last 2 weeks, when I click on Windows Firewall in Control Panel, on two computers, the settings window appears but there a warning on top "for your security, some settings are controlled by group policy" and the selections are grayed out, and the firewall is disabled.
  I have no firewall problem turn on or turn it off in One Care on computers. I've deleted and reinstalled One Care, and even when One Care is removed on both computers I get the same results with Windows Firewall.
  I even replaced the firewall router had to this router.
  Nothing not done, I ran Rgeg priest and anti-Malware.
  I got a response saying to run "mmc", but nothing happens.
  I even spent 5 hours on 2 days with a care that told Finally I must contact support XP and I have had no reports of them support.
  I tried http://windowsxp.mvps.org/resetfwpol.htmon both computers, the Windows Firewall Branch returns to regedit after a reboot and Windows Firewall is still gray.
  I would like to delete One Care and install Security Essentials, but I fear that I can find with no firewall.
  Help, please!

  Mike,
  Me again!
  I removed One Care on both computers, rebooted, installed MSE, rebooted, did a quick auto scan, showed no problems. The Windows Firewall still has the statement "For your security, some settings are controlled by group policy", but the good news is the firewall is on and I can't turn it works!

  Now I can run chkdsk on both computers.

  The Linksys router has SPI Firewall. Should I so on only the SPI Firewall Windows Firewall?

  Furthermore, I run RegClean once a week. Do I need to continue to operate that?

  Don

• digital controls, by group of input values

  Hi, I want to reduce the input values that a user can define a digital control, I know I can set it up to only accept a concrete range but in my case I want to only accept a group of values such as [1,8,22], for example.

  Thank you!

  Use an enumeration or a ring.

  Cameron

• What editions of windows 7 in charge of controls of group policy?

  This question is about my assessment of session has + and the answer is no where in the course of training.

  The options are

  Starter
  Ultimate
  Professional
  Home Premium

  Please help me.

  http://Windows.Microsoft.com/en-us/Windows7/group-policy-management-for-it-pros

• HPPhoenixctrl: WANT to series PHOENIX - LED lighting control Solution

  I'm new to the forum and just got my new PHOENIX envy 860 - 180st, personalized with the following text:

  Windows Pro 64-bit 10

  Intel core i7-6700 4.0 GHz

  16 GB OF RAM

  512 GB SSD

  GeForce GTX 960 2GB

  No secondary drive (I store all the data on a NAS)

  Several Web pages featuring LED façade lighting, I understood that the 860 series provided a method to customize these lights.  I also believe I read that the 850 series could only turn.  However, I can not locate ANY documentation regarding the LED lights.  After hours of searching online, I only now have an interest to stop and reduce my electricity bill.  HP not me was not impressed by this "feature" negotiable.

  There is an application called HP Phoenix lighting (or LED) control which is used to control the LEDS.

  I found it in an old net while browsing through the subject.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/missing-software-HP-envy-Phoenix-850se/m-p/5146673/highlight/true#M111153

  Check in the Control Panel, or type it in the search box on the systray next to the symbol for Windows. There could even be an icon that represents the control of lighting in the systray. My last HP 15 Omen product loan had an app called HP Omen Control, which allowed for control of groups of the backlight on the keyboard. She allowed the owner to make changes to custom groups of key color.

  If she needs relocation, then it must be done in the HP Recovery Manager. See reinstalling software and applications to the HP Recovery Manager.

  @NewEnvyOwner

  Try the following softpaq. It's called the HP utility control of Phoenix.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71672.exe

  BTW, the HP representative, that you talked to was wrong. The softpaq were found in the download of the 850 self-service portal want to Phoenix by HP Expert @Dragon-fur.

• Save and read control values

  I have a program which is highly intensive GUI.

  It has almost 100 boxes of orders/combo of chain on the front panel.

  Once the user fills all the fields, I need to save all the values to a file.

  I don't care if the user can open/view/play the file, I just need LabVIEW to read.

  Later, it the user will need to load this file and all controls have to be filled from the file.

  From what I have seen when looking for boards of Directors.
  I heard a lot of suggestions like this that say I should

  all controls to group together, and then use the XML functions to read/write.

  I have attached a version very very simplified from what looks like the Panel front of the program.

  Do you agree with the above method? Or do you have another way you prefer?

  I would always try to automate it. Rather than treating each control manually, you can do something in this direction or change my previous example:

  

  The big advantage is that you do not have to write manually to the code for each single control and when you add controls he just continues to work. If the controls are not all channels, you can use the OpenG screws to convert a string of variant human readable.

• Notice: do not use a tab control in an fpga vi

  When you use a tab control in the top of the FPGA vi page, then all the controls and indicators on this subject are not selectable in the "i/o property node fpga" on the RT vi.

  

  FPGA 1 use a tab control to group controls and indicators

  FPGA 2 uses no tab control

  Hi Topp,

  the question is: why don't users using elements of the pallet of comics which are available in screw FPGA?

  I am currently working on a notebook and the screen is very low. It's nice to use a tab control to rearrange the controls and indicators on the fpga high vi, but it does not work.

  What do with fpga controls and indicator during debugging sessions (communication interactive façade)?

  What do you do with large screw fpga with several independent parts and many controls and indicators?

  Best regards, Stefan

• How to remove permanently free game players out of my control panel Windows XP computer?

  I would like to know how do I permanently remove/add free game players out of my control panel (Windows XP).  I tried to get this game but it remove it from my control panel.  Your help is appreciated.  Thank you.

  I'm not familiar with the subject, what you write about, but I have a few
  thoughts anyway:

  Control Panel items are special files with the .cpl suffix, in
  \Windows\System32.

  I don't know how to identify the name of the file of the control icon
  Group of experts, but you can try glancing all objects in \windows\system32,
  Sort by type, and then look at the dates - most of them will be the same
  -those that are unchanged in relation to the date of the operating system has been issued. See if you
  spot which could be crime may file and consider renaming - if she
  is currently game.cpl, try game.cpl.bad for example.

  See if you have found the right method. If this isn't the case, rename it back and try another.

  Once you have the correct file, you can just leave it alone, or remove
  it.

  "redrunningintothewaterclan" wrote in message
  News: a8a016fc-9e33-4782-b302-e95417ae618b...
  I would like to know how do I permanently remove/add free off game players
  My Control Panel (Windows XP). I tried to get this game off, but
  He remove it from my control panel. Your help is appreciated.
  Thank you.

  Bill Sanderson

• Office Live Update failed

  System x 86, O14 ø12 & W7

  When I try to install the Office Live Update 1.5 fails and I get an error Code 80070643.

  I continue to offer the update.

  Any suggestions?

  Thank you

  Donalmc salvation,

  ·         Is this the only update that is a failure or other updates as well?

  To resolve this problem, you may need to restart the Office Source Engine (OSE) service and try again to install the latest updates for Office products.

  To restart the Office Source Engine (OSE) service

  You must be logged on as administrator to perform these steps.

  1 open administrative tools by clicking theStart button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click onServices.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. If theOffice Source Engine service is disabled, double-click it to open the service properties.

  4. click on the listStartup type , click Automatic (delayed start), and then clickapply.

  5. underService status, click Start

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  If the problem persists, you can post your questions in the discussion of the agency group.
  http://answers.Microsoft.com/en-us/Office/default.aspx#tab=6

  http://support.Microsoft.com/kb/903772

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change the privileges of sharing and permission for certain applications and software?

  I need to change the permissions and settings for sharing applications. I find the custom preferences not defined by myself as well as many of those who are don't give me "read and write" access for them. When I go to "get info" to change these settings, it says I don't have permission to make changes. How can I solve this problem and make sure that it doesn't happen?

  Nothing should write an application, so I don't know why there is a problem.

  Protection of the integrity of system (SIP) in El Capitan prevents you from changing all the apps.

  For preinstalled applications, the system must have a reading and writing and group / everyone should be read-only.

  They will also have an access control entry, "group: everyone denies delete" which will appear as usual in the window read the information.

  Install apps via drag and drop, you will probably have as owner with Read and Write, but the other group is going to be read-only.

• Effectively save the front panel settings

  Hello.  Just a quick question: is there a way to effectively interrogate all the settings on the front panel and save them in a file to be loaded later?  I know that this is possible by making the keys for each, but my front panel has a huge 38 parameters that need to be saved.  Using the methods I found online and elsewhere in this forum, save a large number of parameters is possible, but would be very tedious.  I was wondering if there was a more efficient way, as a command to mark all present controls and group them into an easy to manipulate the cluster.

  LV 9 versions

• property Boolean Boolean table text

  I have cumulative in the creation of a simple program that creates an array of groups of Boolean controls where each boolean has its own custom text.  I try auto create the Boolean text in a loop, and then after writing change each individual control, I group and pick it up in a table.  What I'm doing wrong here?

  Here's a way using a cluster of string, color box and Boolean to give you something that can be as you want.  Note that the Boolean value is transparent so that it does not hide channel indicators and color box.  If you want to do something like this, the cluster a typedef.

  Lynn

• cluster labview

  How can I set the value of individual control in Group of 4 element(like 4 LED)

  Hi Daniel,.

  one way:

  

  Others are possible...

• I am unable to turn on the firewall on the computer.

  I am informed that my safety is controlled by .policy windows group, which has never they are.they stop turn on the firewall, as it is a private machine, .and I am the administrater. No outside person must have control of my safety. I understand there is a way to regain control. Please

  Help. Roy Barton

  Original title: my firewall is blocked by group policy, how can we turn it on please don't declare the obvious ive tried that.

  Hi Roy,

  Please contact the Microsoft Community.

  You can not turn on the Windows Firewall on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what exactly happens when you enable the Windows Firewall?

  (2) what is the antivirus installed on the computer?

  (3) where are informed that security is controlled by group policy? What is the full error message in this respect?

  (4) what is the version of Windows installed on the computer?

  (5) did you do changes on the computer before the show?

  I would like more information about the issue.

   

  Assuming that you are running Windows 7 on the computer, I could suggest some common troubleshooting steps.

  Method 1-

  I wish that you are running the fixit-

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

   

   

  Method 2-

   

   

  I recommend you to perform a clean boot.

  Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: You must follow the step 3 of the article to return the computer to a Normal startup after you perform all the troubleshooting steps.

   

  Now try to turn on the firewall.

   

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.