convert and expand the empty drive

Similar Questions

• Dear all, can __How I increase and expand the volume of my hard 22nd of the available capacity at the (:)) d hard drive)

  Dear all,

  How can I increase and expand the volume of my hard capacity available to the (d) 22nd

  Hard drive

  You can't take a little D: and nail it on C:

  You delete D: > and then extend C: into the now unallocated space that will become D:.

  Save all data on D:, as it will be lost.

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  How to remove and extend a Partition with Vista disk management

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to detect and open the HARD drive

  Hello. I have a Seagate 1 TB external hard drive. And my mac is running on the latest OS, I was still able to connect and open my hard drive on my mac, but after reboot my macbook only once after an update, I can access is no longer my hard drive. Why is it so? Is that what I can do to re - open and use my hard drive as usual?

  Restart and hold down command + R, this will take you to the recovery, you can test and repair the hard drive.

• Windows Vista how do dynamic C drive and delete the D drive.

  I loaded Vista removed, loaded XP, removed XP and re-installed Vista, once I reinstalled Vista, drive D appeared and I can't figure out how C dynamic disk and remove the D drive.

  Hi winfieldmack,

  For instructions, see the following article:

  Change a disk from basic to dynamic disk

  Note: Steps are applicable to Windows Vista, too.

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Put the new upgrade of Windows 10 on my 500 gig SSD and make the main drive (C :)

  Original title: Windows 10

  You want to install (upgrade) new Windows 7 Pro 64) Windows 10.  No problem.

  Here's my question and need help.  I want to put the upgrade of Windows new 10 on my 500 gig SSD and make the main drive (C :)  Just got new PC and the SSD is not yet installed in the new machine.

  Is there a way to do this?  I can install the SSD drive in the pc without problems.  But the pc is set up with the C: drive in the primary.  As I understand it, the update will work, but it will not be for the SSD.

  Suggestions?  Is this possible?

  Windows 7 installation will have to be eliminated if its currently on a separate disk. Which means you have to start over.

  I would first disconnect the hard drive with your Windows 7 installation.

  Install the SSD drive, then install Windows Pro 10 on this subject.

  Download and create a bootable copy of Windows 10 Pro:

  How to download official Windows 10 ISO files

  Demarrer start from the installation media, and then select the SSD during installation:

  How to: perform a clean installation of Windows 10

  Reconnect the hard drive, then format the installation hard disk.

  Option to consider:

  Create an image of the installation of Windows 7 system restore it on SSD, and then upgrade to Windows 10.

  How to pass Windows 7 to a bigger hard drive - books...

  Disconnect the hard drive, connect the SSD drive, then restore image and then upgrade to Windows Pro 10

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Check out the YouTube video below:

  How to properly set up the SSD as boot drive and the HARD drive...

• How to find and install the audio driver for HP A5HOOEA

  Hi all, have a HP Pavilion g6-1210ea 15.6 "laptop. Can't find an audio driver to install

  Operating system Windows7, error message keeps coming up no audio device installed

  Thank you, Sue

  Hi Sue,

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Xps420 - how to install a 2nd HD and make the new drive the boot drive?

  I bought a new and more large hard drive for my system XPS420 almost nine.  I want to install the new disk, create two partitions as the original (C & D (reprise)) drive, copy all of the original drive to the new drive and make the new drive the boot drive, with the original drive becomes a secondary additional storage drive.  I understand how to use the Vista disk management feature to create the partitions and format the new drive. After that, what is the best way to proceed?

  
  

• expand the hard drive

  Dear all,

  I would like to extend the hard drive on my virtual machine. But unfortunately he is disabled, even when I stop the virtual machine.

  It is machine virtual version 7 and the hard disk, the thick type of provision.

  I need to extend the C: drive.

  Would be an option to add a second virtual hard drive on the virtual computer and extend the C drive?

  Thank you

  Edy

  The most common cause for this is that the virtual machine has Active snapshots. You must delete all snapshots in order to be able to resize/grow a virtual disk.

  André

• How can I contract and expand the area of content/mainbox according to the resolution of the screen?

  Hello

  I'm working on my photography website. Its already online. But I need to make some corrections. I exported a gallery lightroom to 1000px simpleview. Now how can I contract and expand the area of content/mainbox according to the resolution of the screen? If I set the height to 100% firefox does not have this value, then it works fine on safari and chrome. so I need assign value in px terms and it works very well. But then it is not contract when opened on a small resolution of 1024 x 768. Can anyone help please?

  Thanks in advance,

  Rohan.

  www.rohanjuierie.com

  You would have to change the Flash things in Flash, not HTML code.  And you don't know all the reasons why you might not want to engage their entire 'portfolio' to something that is not visible on iPlatforms, or with appliances and accessories functional screen, right?

  It is a beautiful campsite...

• Delete a partition in a virtual machine and expand the initial allocation of hard drive

  I have created a virtual machine running server 2012R2 with an allowance of 60 GB drive. I decided after doing hours of work on the virtual machine I had assigned too little disk space for the virtual machine. I decided that I just go in vSphere and change settings and add to the existing space. The problem is that it has created a new partition rather by increasing the size of the original, which doesn't help me. How can I remove this new partition and just expand the original that has been allocated when I created this virtual machine?

  Thank you

  Hi Paul,.

  Could you clarify what you mean by;

  The problem is that it has created a new partition rather by increasing the size of the original

  (A) do you mean you modified the virtual machine and added a second disc, rather than increase the size of the original? or;

  (B) you increase the size of the original disk and create a new partition in this free space?

  Be that as it may, the question should be simple to solve;

  (A) remove the second disk you don't need, increase the size of the original. Then from the OS Disk Manager, rescan the disks and extend C:\ in free space.

  (B) delete the partition that you don't need. From the OS Disk Manager, expand C:\ in free space.

  See you soon,.

  Jon

• Increase the C: drive and reduce the E: drive decrease?

  Hi all

  My c: drive------fills constantly which is causing the overall performance of my laptop to be very bad. It is very slow! I don't have a lot of files etc on my C: drive, but it still keeps filling in shortly after a cleanup and defragmentation. My E: drive is constantly empty and I want to be able to use this space on my C: drive.

  I don't want to move the files to the E: drive 'free' space on C: because I don't have a lot of files on C: to move.

  Can I change the volumes of each drive to increase the capacity of C: and diminish the ability of e: or can I remove E: and give all the space on C:

  Any help would be appreciated?

  Thank you
  Colin

  Hello Colin

  In General, you can do what you want and all this can be done in computer management > disk management.
  I don't know what model of laptop you have, but for laptops with HARD drive recovery image, it is not recommended to change the partition structure because it can have a negative influence on the HDD recovery procedure. If you have ever portable model and you created the recovery DVDs then you can do this. For the installation of the OS, you can use recovery disk installation only.

  Back to your question.
  In my opinion there is no great sense to change this structure of score because you can use the free space on the second partition for your daily activities. I don't know what you're doing exactly, but all your data like mp3s, pictures, movies, office stuff, and anything else can be saved on the second partition.
  You can also set the second partition as the target of download and all files you download will be saved there.

  Your sentence is a little strange to me.
  > You wrote
  > I do not want to move the files to the E: drive 'free' space on C: because I don't have a lot of files on C: to move.
  So I wonder what you do to fill the C partition, but there is nothing to move. Can you please explain it to me?

• Expand the C drive in Windows 2003 Sp2

  Hello

  I need to expand a VM windows Server 2003 R2 C: drive using VMware vcenter convertor, fight, it doesn't did me not the possibility of increasing the C: drive. What is the alternative? or I've missed using the V2V? Thank you.

  kamran7446 wrote:

  Thanks for your reply. Yes, it's showing as unallocated, but because it's a system (C:\) drive I can't extend it by using Diskpart utility I can do for other readers.

  There are different ways to do this for Win 2003 (easy in 2008, has expanded in the GUI). For Windows 2003 you could close the virtual machine, get the VMDK on another Windows Server, use Diskpart or another tool to extend partition here - since it is not the system partition / boot. Then mount it in the original virtual machine.

  Official VMware training, they recommend a free tool from Dell, called extpart.exe. Simple tool command-line which allows to extend the system partition / boot when the virtual machine is running. Check it out and try if you wish.

  It is on the FTP of Dells site at ftp.dell.com/app, any logon not required.

  Tool: http://ftp.dell.com/app/ExtPart.exe

• Cannot expand the hard drive of a Server Windows 2003 VM

  Unable to increase the hard of a Win 2 k 3 server VM 15 concerts in 30 concerts

  Increased the size of the 30Gigs VMDK file, checked on the ESX server console file vmdk-dish shows 30 concerts

  seal the vmdk on another virtual computer file and he started, partition of concerts of two shows 15 disk management is active another is not allocated, extend part of disk does not work for this disc error "selected Volume cannot be extended.

  Tried to remove and attach the file on another virtual computer same error

  Please need help to get VM hard drive has increased for an installation of the patch app

  I wouldn't recommend VMware Converter. It is not supposed to copy all your data only to resize a disk so that you can use extpart or gparted for do it for you.

  http://blog.Baeke.info/blog/technologies/VirtualMachines/_archives/2006/11/4/2472141.html

  It is pretty easy, as you can see.

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• Divide drive merger and disable the failed drive

  So I have an iMac end 2012 27 "with a 1 TB fusion drive. Naturally the disk rotation has not now and the mac won't boot off the fusion drive. Running on my external drive USB 3.0 for now.

  I think ultimately for reliability I won't replace the drive spins and I'll go with an external thunderbolt SSD raid. But, how can I do to do a few things...

  1 - divide the merger in 2 discs disc so that I can format it and actually use the SSD which is always very good.

  2 - completely disable the spinning player who doesn't have to leave BONE trying to rotate upward and detects it and always tells me that he has not etc.

  Naturally, I try not to open the computer and disconnect the player. Yes, I have the skills to do that, I don't just want. So why I'll spend more of $ and get the raid external thunderbolt.