Use the system Exec IrfanView to open the JPEG file

Similar Questions

• Cannot read the CD after you have used the active file system

  I use the active file system in Vista to save my work on CD - R. I have often refer to these discs, and occasionally add other files. Once the disk is full, I start a new.

  After referencing files on a disc, I pushed the button as usual. The disc was not immediately ejected. A window on the toolbar open and told me to wait and finally ejected the disc.  When I tried to use the disc again, I could not access the data. I know that the data is still on the disk. In 'Computer' I see '327 MB 702 MB free space'.

  If I click on the drive or try to open it, I get a message "no answer." Finally, I get a window that says to "drag files to the disc to add data. Vista think it as a blank disc.

  Is it possible to access data on the disk, so I can save up to a new drive? Also, what hurts which has caused this problem? I don't want to do it again.

  Thank you!
  Bob

  Hello

  Check the drive in another computer, better check in several. CD and DVD door, especially
  RW. If the question with a single disc? There are companies that may be able to recover the
  data if it is quite expensive.

  Very good idea to have redundant backups.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why can not open a JPEG file in an e-mail message on my computer but I can't do on my smartphone? I'm used to be able to do this before the upgrade to the CD player.

  Adobe Acrobat Reader DC using newly updated since Adobe Acrobat, I am not able to open a JPEG file in an e-mail message in Microsoft Outlook on my computer but I am able to open the attachment on my smartphone.  I think I used to be able to open a JPEG file before the upgrade.  I don't know what to do.

  mredjoe49 wrote:

  Adobe Acrobat Reader DC using newly updated since Adobe Acrobat.

  It's more than likely the problem. The Adobe Acrobat Reader software is not an 'upgrade' to Adobe Acrobat. Acrobat will open and convert .jpg files in PDF, free player open that pdf file.

  If you want to 'upgrade' and need this capability, you must update to Acrobat, not reader.

  The good news is that you should always have Acrobat on your system. Open it and use it to open the .jpg file.

• Using Autodesk Architecture 3.3 and opening a working file, I get the error message error "there was a problem sending the command to the program".

  When using Autodesk Architecture 3.3 and opening a working file, I get the error error message "there was a problem sending the command to the program". What does that mean? At the same time (or nearly the same time) trying to create a pdf from a drawing file is suspended the program autodesk. These two worked before.

  Hello

  The question you posted would be better suited to the Forums from Autodesk. I suggest you post here for better support.

  Here is a link:

  http://forums.Autodesk.com/

• Is there anyway that I can use the MP3 files for the computer system sounds in windows 7

  Is there anyway that I can use the MP3 files for the computer system sounds in windows 7. Any help would be appreciated, thanks - Joe

  I don't think so. If you convert the .wav files, you could. Google for an MP3 to WAV converter.
   
   

• Using a desktop PC I'm opening a PDF file and trying to save as a WORD document.  The application continues to send me subscribe to convert the document that I already did before.  Is there another way I should try to convert?

  Using a desktop PC I'm opening a PDF file and trying to save as a WORD document.  The application continues to send me subscribe to convert the document that I already did before.  Is there another way I should try to convert?

  The see often when someone pays for a product buy us tries to use another. Less often if the subscription fails.

  So, what exactly did you pay?

• Change this program opens the jpeg files

  When I try to open a jpeg file, it sends me to nero to open, I don't have it and would like to know how to change the program that will open these for me and what program to use

  If the file is already on your HARD drive, skip #1.

  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: What image viewer you have on your machine.
  6. check: always use the selected program to open this type of file.
  7. click on OK.

• Do not open the JPEG files recovered...

  I have quick formatted my E drive. Then I restored data with software. But do not open the JPEG files recovered.

  The size of the file is the same. But when I try to open the error "invalid image". I tried almost all viewers but the problem is the same.

  How can I open these JPEG files...?

  Help, please...

  Thank you

  You can try the JPEG recovery tool, it might be useful. This is normally due to the change in the location of the file once you retrieve the data.

  http://www.hketech.com/JPEG-recovery

  CheersJ

• How to use the xmp file

  I'm retouching of images of a customer and he suggested that I use the xmp file.  Can someone help me understand how to use it in Photoshop or Lightroom (or bridge).  I understand that the xmp files can contain metadata.  They also contain edit changes customers want as brightenes value, white temp, color etc.?

  Thank you very much

  Lisa

  This is the menu that appears when you open a raw file in Photoshop?

  Yes, this is the Camera Raw plugin.

  The XMP file contains the changes that have been made so far in the file, but cannot contain suggestions for future changes.

  You don't have to do anything to associate the XMP file to the image, except by checking that the two files are in the same folder.

  Camera Raw will automatically read the changes.

• Use for a PS file browser now? I'm used to use the browser file on CS1

  Use for a PS file browser now? I'm used to use the browser file on CS1

  New versions of Photoshop comes with Adobe Bridge to organize image files.  However you are not required to use it.  You can also use LightRoom or system utility such as Windows File Explorer and the Mac Finder.  Photoshop itself uses system dialog boxes to access your files from file systems.   When Photoshop displays a beautiful or save dialog for you in all likelihood, it is a Windows or Mac system dialog box.  Versions of Photoshop can also have some internal dialogues of programmed by Adobe Photoshop to access your systems file systems.

• To use the raw files of fujifilm xt-1 with cs5

  I want to improve my for CS5 raw converter, so I can use the raw files of Fujifilm XT-1. When I try to download camera raw 6_4_1 it will not install. I use OS 10.8.5.

  Can someone tell me what I am doing wrong.

  Given that this device requires at least camera raw 8.4 and photoshop cs5 can only use raw 6.7 camera upward for the plugin, you can use the

  Adobe 8.6 dng converter to convert you X - T1 files Fuji camera raw dng best, should open so that photoshop cs5.

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  8.6 Adobe dng Converter:

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 8.6

  How to use the dng Converter:

  Camera Raw: How to use Adobe DNG Converter - YouTube

  In photoshop cs5, you can check what version of camera raw, you have by going to Photoshop > about plug-in and clicking on the words of Camera Raw.

  If you need the raw update 6.7 camera:

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Camera Raw 6.7 update

• recover the database unitl cancel using the control file

  I refreshed with db1 db2, copied all the newspapers dbfile and archive to the db2 server and setup/adjusted spfile, controlfile etc on the new db2 server and has
  recover the database unitl cancel using the control file.
  ALTER database open resetlogs.
  
  Now the customer want to refresh it after 2 days, I wonder of I need only archive newspapers or both? to do the same again?
  
  Published by: DBA2008 on November 11, 2009 09:49

  Yes, you can 'restore to cancel' several times.

• How to upgrade a driver automatically in Windows NT by using the batch file

  I use the devcon tool to update a Windows XP driver, but unfortunately it does not support Windows NT. So I'm looking for a similar tool for Windows NT. Does anyone know any tool / or script that would update a driver via file/command line in Windows NT?

  Thank you for taking the time to read the question.

  Hello supportalcon,

  Thank you for the question!

  It is disheartening to know that have problems you with the Windows Driver. As I understand it, you need to update a driver automatically in Windows NT by using the batch file.

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  Meet us if you face any problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Why not be able to run MRT.exe using the batch file?

  When I run the following script using the batch file, MRT cannot be run.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  off @echo
  C:\WINDOWS\system32\Mrt.exe/q/f

  Hello

  ·         The computer is connected to a domain network?

  ·         What is the error you get when trying to execute the batch file?

  If the computer is connected to a domain network, I suggest you to report this issue in Windows XP IT Pro Forums: http://social.technet.microsoft.com/Forums/en-US/category/windowsxpitpro

  Thank you.

• How to adjust the volume to specific levels by using the batch file?

  I use Windows Media player and want to adjust the volume level automatically using planning.

  Anyone have any suggestions on how to set the volume level by using the batch file?

  such that 0 is mute and 10 max, I want to set the volume 4

  Thanks in advance for your suggestions

  Eric

  Hi Eric,.

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope the helps of information.