Convert excel vba to the Coronet script
I have a working excel spreadsheet that allows to interpolate given z and x, y, using a matrix lookup table. I enclose the excel file. I would like to import this feature in Diadem. Basically, I collect the engine rpm and the pressure of the circuit, and I would like to know what is equivalent to the output of the compressor resulting (l/min).
These data are a vehicle for 100 Hz sampling frequency, and this would greatly help with data analysis.
The excel user-defined functions are www.tushar-mehta.com
Any help would be greatly appreciated.
Hi hamiltoncj,
It took me awhile, but I think I have a good solution for you. I reworked the script you already had to deal with all of the measured values of XY and interpolate the value of Z for each measure. I then created a REPORT layout that shows the surface of interpolation, the original research of values (Square markers) and the measured XY points (grey circles). I also created a surface 2D and 3D showing just the interpolated measured surface and its XYZ (of the gray circles) points. Finally, I added all the Z channel values interpolated and displays the result on the sheet of each STATE. To do the calculations and graphs to run faster, I had the script delete all the Governor = 1 lines from measured data so that all measured value XY lines which were outside the defined lookup range XY table.
I quoted "summed up compressor Output" in litres as you suggested, but I'm not convinced than the units I found in your Excel sheet spread (X = 1/min, Y = bar, Z = l/min) support this conclusion. It seems to me that if I have a bunch of values l/min in summary I get a value which still has its unit = l/min. Have we not need to multiply the sum by the number of minutes between the measured data points (frequency of sampling in units of minutes)? If so, then just do what change in 119 of the script line - this is where the "Sum_Output" property is calculated and added to the Z channel.
Ask you questions,
Brad Turpin
Tiara Product Support Engineer
National Instruments
Tags: NI Software
Similar Questions
-
Acrobat can automatically convert excel files to the opening?
I have a lot of PDFs and they keep coming so I'll try to automate the process of conversion Excel that then goes into MS Access. Is there something I can do so that when the file is placed in the folder, what a batch file it opens in Acrobat and then I code something in there to convert the file to Excel with me having to do something? Overall what I'm trying to do, is have a program that takes each PDF in a file and converts it into an excel spreadsheet. Manually, the conversion is good and in the format I need. I just want to know if this can be done before I start and learn that this is impossible.
Thsnks,
Eduard
Yes, you can certainly write a program using the Acrobat SDK kit to automate our conversion to Excel.
-
Conversion of excel in the calculation script formula
How to convert this excel formula in the calculation script in pdf format?
= IF (K10 = "PRF1120", 13, IF (K10 = "PRF1020", 10, IF (K10 = "PRO1020", 8, IF (K10 = "PRF1140", 5, IF (K10 = "ACC 1020", 3, IF(K10="PRO1080",4,""))))))
The custom calculation script should be something like:
Get the value of an input field
var sVal = getField("K10").valueAsString;
Set the value of this field depnding on the value of the input field
switch (sVal) {}
case 'PRF1120 ':
Event.Value = 13;
break;
case 'PRF1020 ':
Event.Value = 10;
break;
Repeat for the other possibilities
by default:
Event.Value = ""; This field blank
}
More information about the JavaScript statement switch are available in any decent JavaScript reference. Replace "K10" in the first line above with the actual name of the input field.
-
the month 1.99 version can convert Excel sheets in pdf format?
The month 1.99 version can convert Excel sheets to the CEO?
The product is Adobe export in PDF format. It is used to convert PDF to Word files or Excel online.
For more information please see export as PDF, Word or Excel online | Export of Adobe PDF
You can also consult PDF Converter online, convert to web or Acrobat Reader | Adobe PDF Pack for your needs mentioned in the request.
Kind regards
Hervé Khare
-
When I convert a PDF file to Excel is downloaded the PDF from Adobe to convert?
I bought an annual subscription so that I can convert PDFS to Excel, but if the PDF file must be downloaded to Adobe before it can be converted I'm not sure it will work for me because it's a PDF company and I do not think that security policy allows for the download of information about the company from third-party servers. I looked for a stand-alone Adobe converter for it but have not found one.
Adobe PDF, Adobe ExportPDF Pack - download Adobe.
Adobe Acrobat Pro, Adobe Acrobat Standard - run locally on the computer.
-
Using the event Script to load the Excel model data for users
Hello
Whoever did this in the FDM 11.1.2.1.
We want to exploit the event Script to load the data validated MDF for a standard template so that users can make some adjustments and then load the same data through the FDM? Is there a better alternative. Basically, trying to avoid making adjs data forms in HFM in view of the number of columns that we have and validations for each line required with adjustments.
Thank you
PM
Hello
google + Administrator's Guide.
It's just a matter of thought in the solution:
-Runs a SQL query to export data from table (TDATASEG). You can filter the query by LOADID
-Write csv file records
-
Spreadsheet Excel add after the syntax
I have a large application that creates a report following a test. The report is about 250 pages, each page represented as a group in the data portal. When we deliver him customer report also wants an excel file with pairs of X - Y data for each of the graphs in the report. I know how to make the selection of the data and copy/paste it to Excel. Where I encountered problems, that's when I add worksheets in Excel, I can't figure out how to run the new worksheet to add at the end.
According to the news on Excel VBA, there are parameters before and after that should allow you to do. I can't quite understand the syntax to include these parameters. The line of code in question is red.
If you have nothing but the. Add the statement that the code works but the worksheets appear in reverse order. I tried a number of different ways, and the script just dies without even showing an error. I know one around which we work to scroll the list of the groups back, but that's not fair to sit well with me. I prefer to do things in a logical manner, being from the first to the last.
If there are questions please let me know.
Thanks in advance.
Wayne
FilePath = autoactpath & "\dataoutputtemplate.xls".
ExOpen = True
Nomclasseur = NameSplit (FilePath, "N") & ".". XLS '.
On Error Resume Next
Set Excel = GetObject (, "Excel.Application") ' get Excel via OLE if it is already open
If Err.Number <> 0 Then
Err.Clear
Set Excel = New ' start Excel via OLE
If Err.Number <> 0 Then
' Exit Sub
End If
ExOpen = False
End If
Excel.Visible = true
IsWorkbookOpen = Excel.Workbooks (WorkBookName) there's nothing = False
If ExOpen then
If not IsWorkbookOpen then
Set ExcelWkb = Excel.Workbooks.Open (FilePath) ' open the Excel file if it isn't already
End If
on the other
Set ExcelWkb = Excel.Workbooks.Open (FilePath) ' open an Excel file from excel is not already open
End If
Err.Clear
On Error Goto 0GrpStart = GroupIndexGet ("Globals")
NumGrp = GroupCount - GrpStart
ReDim PageList (NumGrp)
ReDim SectList (NumGrp)
b = 1
c = 1
for a = GrpStart to GroupCount
CurGrpName = GroupPropValGet (a, "name")
If InStr(CurGrpName,"List") then
SectList (b) = Mid(CurGrpName,5) ' remove 'List' in the name of the group to be used in the Table of contents
b = b + 1
End If
If InStr(CurGrpName,"_") then
PageList (c) = CurGrpName ' Gets a list of groups that should be exported
c = c + 1
End If
Next "(a cycle through groups can gather names)
' Add the Table of contents: sheet in workbook
Set ExTOC = Excel.Workbooks (WorkBookName). WorkSheets.Add
ExTOC.name = "Table of contents".
For d = 1 to c - 1 ' c is the number of valid sheets in the report which will be exported
Set ExcelSht = Excel.Workbooks (WorkBookName). WorkSheets.Add (after: = last sheet in the workbook)
ExcelSht.Name = PageList (d)
Next would then report to export pageHello Wayne!
What you need to know, is that you can leave empty parameters. The solution to your problem is:
Set ExcelSht = Excel.ActiveWorkbook.WorkSheets.Add (, Excel.ActiveWorkbook.WorkSheets (Excel.ActiveWorkbook.WorkSheets.Count))
Matthias
-
How can I convert Excel formula to Javascript?
I tried using online Excel formula Beautifier to convert an Excel formula in javascript for use in Adobe Acrobat Pro XI > forms > text field properties > custom calculation Script, but it didn't work. (I first changed the number of Excel cells for the correct names of the form (Acrobat) in the following calculation fields)
Formula Excel using domain names:
= IF (goals = 1, GA1, IF (goals = 2, (SUM(GA1,GB1)/2), IF (goals = 3 (SUM(GA1,GB1,GC1)/3), SO (Goals = 4, (SU-M(GA1,GB1,GC1,GD1)/4)))
Calculation Javascript converted using more Web site:
(Goals = 1, GA1, IF (objectives == 2, ((GA1,GB1)/2), IF (objectives == 3, ((GA1,GB1,GC1)/3), IF (objectives == 4, ((GA1,G B1,GC1,GD1)/4)))))
There is no error message, but no results on the ground. I'd like if someone could help me with this script. Thank you!!!
Windows 8.1, Acrobat Pro XI
Regardless of this JavaScript, it is not complete. Something a bit more readable would be:
Get the field values as numbers
var goals = + getField("Goals").value;
var GA1 = + getField("GA1").value;
var GB1 = + getField("GB1").value;
var = GC1 + getField("GC1").value;
var GD1 = + getField("GD1").value;
Set this field value
switch (goals) {}
case 1:
Event.Value = GA1;
break;
case 2:
Event.Value = (GA1 + GB1) / 2;
break;
case 3:
Event.Value = (GA1 + GB1, GC1) / 3;
break;
case 4:
Event.Value = (GA1, GB1, GC1 + GD1) / 4;
break;
by default:
Event.Value = "";
break;
}
This assumes you have fields with these names.
-
Excel VBA for JS: How does a rectangle col coordinated to a JS function.
I have an Excel VBA sub that calls a function JS folder level and I'm going through a set of coordinates of rectangle.
This is the VBA code:
Void BarcodeDoc_PDF417 (String pdfFileName)
Dim AVDoc As Acrobat.CAcroAVDoc
Dim PDDoc As Acrobat.CAcroPDDoc
Dim myApp as Acrobat.CAcroApp
Jso As Object Dim
Dim bcTmpFile As String
bcTmpFile = "C:\Temp\bcTmpFile.pdf".
Set myApp = CreateObject ("AcroExch.App")
Set AVDoc = CreateObject ("AcroExch.AVDoc")
If AVDoc.Open(pdfFileName, "") then
Set PDDoc = AVDoc.GetPDDoc
Define the jso = PDDoc.GetJSObject
jso.myAdd417Barcode 'where is the coordinates transmitted.
PDFSave PDDoc, bcTmpFile
myApp.CloseAllDocs
myApp.Exit
Set AVDoc = Nothing
Define the jso = Nothing
Set PDDoc = Nothing
Set myApp = Nothing
On the other
MsgBox "Sub: BarcodeDoc_PDF417.» "Document not found:" & vbCrLf & vbCrLf & pdfFileName
End If
End Sub
This is the level of JS script file:
function myAdd417Barcode (myCoords)
{
The line below is just to test. Going once I get the coords in my sub VBA.
var myCoords = [324, 756, 540, 720];
InsertPDF417Barcode (this, myCoords);
}
I tried to move the coords as a string and a table, the two nothing helps. Any ideas?
Thank you.
He is quite right, myCoords is not defined. mycoords is however.
-
Adobe Javascript from Excel VBA
I have some have little experience with VBA Excel and Adobe Javascript separately, but I never tried to put it together. I'm quite baffled by the use of 'DoJavaScript' from in Excel VBA. I have a number of JavaScripts Illustrator that do various tasks (for the most part, measure and set properties on illustrator objects to determine geometric measures). I wanted to run these scripts from Excel VBA (they run smoothly when it is called directly in Illustrator). My hope was to spend some real numbers of VBA in the JavaScript code before we ran to set some performance parameters and get some real numbers back out the JavaScript in VBA. I can't get even the simple DoJavaScript given command in Adobe VBscript reference to run. Read other messages that seem somewhat related that it is unclear if I hurt something very simple, or if my understanding of the use of the DoJavaScript command is incorrect. Is anyone able to shed some light on this?
My last try was this simple test... almost directly from the reference from Adobe:
Private Sub SetScale_CommandButton1_Click()
Set appRef = CreateObject ("Illustrator.Application")
Set myNumberOfDocuments = appRef.DoJavaScript("documents.length;")
MsgBox myNumberOfDocuments
End Sub
I really hope to be able to run javascripts that are a few hundred lines long..but, even if I can't get something simple to go so I'm about to give up on this.
Thanks for your suggestions
I got type mismatch error, to make your sample work, simply remove the "second".
Private Sub SetScale_CommandButton1_Click()
Set appRef = CreateObject ("Illustrator.Application")
myNumberOfDocuments = appRef.DoJavaScript("documents.length;")
MsgBox myNumberOfDocuments
End Sub
-
Convert Excel to PDF using specific fonts that before shift ends with missing text
Hello, I hope someone can help out me. I have a problem with the conversion of an Excel specific document to PDF using Acrobat 6.0.6. Whenever this document is converted to PDF, on a specific computer, there are missing lines of text. The text font is avant-garde. I can change the font to something like Arial and it allows you to convert very well and all text will be shown in the PDF file.
I have already reinstalled Windows on this PC with its strict necessary and of course the problem persists.
The font of Vanguard is installed through Adobe Type Mangager Light 4.1. The fonts are Post Script. PFB. I have a second and third PC with the same configuration and these other two can convert Excel to PDF using Acrobat 6.0.6 with no problems (using the same Avant Garde font).
I can uninstall and reinstall Acrobat 6.0.6 and this will fix the problem temporarily, but eventually he'll come back in a day or two.
Is there anything that anyone can think that would cause this problem to occur?
It is possible that you have to install the MS Hotfix here:
-
Client server of executable activex LabVIEW project with excel vba
Hi all
I submitted a ticket to support nor on this problem, but my deadline for this project is very close, so I would like to ask the community to see if someone has encountered this problem before (I hope it's ok that I'm doing this!). I did a fair amount of forum-scouring, and I didn't know this even discussed problem.
I built a labView project which is essentially in the material data and
preforms various visualizations and transformations on the data. A bit of the
Screws in this project are available by VBA Excel as a Server ActiveX with LabView and
Excel as the customer - and it works! I recently discovered I would need to do a
executable version of my project, so I'm now trying to figure out how to do the same thing
with my executable file as the server instead of LabView. Here's a simplified version are
My VBA code:Void Button1_Click()
Dim lvapp As MyServer.Application
Dim vi MyServer.VirtualInstrumentSet lvapp = CreateObject ("MyServer.Application")
VI the value is lvapp. GetVIReference ("Main.vi", "", True)
Sheet1.cells (1, 1) = vi. GetControlValue ("Path")
lvapp. Quit smoking
End SubI replaced LabView here with the name of my server. The code
failure of the CreateObject method with the following error:Run-time error '13':
Type mismatchThings, I'm pretty sure I'm doing it correctly:
-L'application is configured as an ActiveX server in the build options
-J' ran the VI once and close/re-open it just after each build before trying the
worksheet
-In excel, VBA method is configured to reference the type library of the server.
-J' have LabView itself closed when I run the .exeThank you
Alex
My versions and such:
Software of NEITHER: LabVIEW version 2012
OS: Windows 7It's interesting - I'll have to look into the issue. In the meantime, I found a solution.
It's quite mysterious, but it seems that all I had to do was make sure you only the type library of the server executable has been referenced in VBA (no LabView or OLE type library) and declare the variable app as object, rather than MyServerName.Application. Honestly, I have no idea why this works, but it does. Also, I learned that you need to use the executable file paths, which are a little different than the paths of project files.
Thank you
Alex
-
I have custom dialog box based on the java script code that prompts the user to enter data for a room tag. This label is then annotated on the pdf document. At the present time, the captured annotation can be deleted. I want to be show as permanent on the pdf page.
Thank you.
You must flatten the page that this annotation is one to convert static content into PDF. To do this, use the Doc.flattenPages () method:
-
I use this to convert date to Excel datevalue, is there a simple way to do this?
select to_date('31/12/2013', 'dd/mm/yyyy') normal_date, (trunc(to_date('31/12/2013', 'dd/mm/yyyy')) + CASE WHEN trunc(sysdate) >= to_date('01/01/1900', 'dd/mm/yyyy') then 1 else 0 end) - (to_date('01-01-1900', 'DD-MM-YYYY') - 1) excel_date from dual;
Source: https://community.oracle.com/thread/1127089?tstart=0
Hello
SeshuGiri wrote:
... But I'm going with this data type conversion error. because of 'A ' | '|' ||
Basically; This is because you are mixing. and - operations.
Once more, if dt is a DATE, not earlier than March 1, 1900, then Oracle
DT - DATE '' 1899-12-30
is the number that Excel uses for the same date.
If you want to concatenate ' was: ' for this, you can do something like this:
SELECT ' A |' | TO_CHAR (TO_DATE (31 DECEMBER 2013 ', "DD/MM/YYYY"))
-TO_DATE (12/30/1899 ', "DD/MM/YYYY")
) AS excel_dt
DOUBLE;
-
Convert excel to PDF printable
How to convert excel to pdf printable template?
Hey Tmarie,
You can convert excel to PDF using Acrobat.
You can download a trial using the following link: Download Adobe Acrobat products. Standard, Pro | DC, XI, X
Kind regards
Rahul
Maybe you are looking for
-
Welcome!Please activate your account by confirming the email address. Otherwise:https://accounts.firefox.com/v1/verify_email?uid=bffd94f5a8be4c7bb6b9f5b11fc94ac0 & code = 188d15706def4780cdcefbb7daa29361 & service = syncIt is an e-mail automated; If
-
HP 15-r002se: USB port does not
I have a problem with my laptop [HP 15-r002se] all three 3 usb ports do not work, or even detect that something is plugged, I tried techniques to conquer the problem by the system of formatting and reinstalling windows 8 32-bit where I found myself w
-
Toshiba 40L6353DG - format not supported, trying to play from the NAS
Hello I have a problem with the Smart TV and ZyXEL NSA320S - I find the movie on the NAS without problem, but when I try to read the file, then it goes to/unsupported FILE FORMAT. When I copy the file on USB, it goes without problem. NAS is JBOD (no
-
Yahoo "search engine" and "Toolbar settings" does not.
I have Firefox 17.0 and I installed a device of 'Lights' Out. Since then, things have not worked. When I click on my Yahoo Search bar I get this "error window that directsearchframe.createtbo_ie:Access is denied Also my "Toolbar settings" function al
-
How can I move a compressed file (zipped) on my memory stick?
I can download a "e-book" from loc.gov. It is sent compressed (zipped). How "decompress this file? How can I move the "file unzipped on my memory stick? Any help will be greatly appreciated!