Convert the object to a string

Similar Questions

• convert the column to a string name

  pls help me.
  
  I need to know how can I convert the column to a string name because I can not insert the column name into my table.
  
  
  for matrix (SELECT nom_de_colonne
  OF all_col_comments@myDBLink
  WHERE UPPER (trim (table_name)) = "ROLEMATRIX")
  loop
  INSERT INTO myTABLE (myColumn)
  VALUES (matrix.column_name);
  end loop;
  
  
  my error:
  ORA-00984: column not allowed here

  which line you are confronted with error, because I've also tested this, his work on my side!

• DW cannot convert the < object > tag created with swfObject 2

  I have a Flash video on an "integrated" static html page using the swfObject method 2. When I open the page in DW CS3 I get this error message:

  "This page contains < object > tags that may not work properly in the most recent versions of Internet Explorer. DM cannot convert the < object > tag. »

  Page plays the video the two local system on the server.

  this test page is here: http://www.rjdutton.com/about_movSWF2.html

  Relevant source code is:

  --> < object classid =... etc and

  --> < object type =

  Since this is the only code on the test page that refers to an object tag.

  The on-board Flash I have on the website (home page and the who we are page) now are incorporated using < embed > via Flash CS3 (AC_Run active content), but this method does not validate. the swfObject method 2 valid.

  I'm working on a Mac. Could someone check the page on the victory of the IE and see if the video is running?

  Can I ignore the message 'error' of Dreamweaver?

  Thanks - Susan

  I think that you will have no problem ignoring the message.

  Ken Ford
  Adobe Community Expert - Dreamweaver/ColdFusion
  Adobe Certified Expert - Dreamweaver CS3
  Adobe Certified Expert - ColdFusion 8
  Fordwebs, LLC
  http://www.fordwebs.com
  http://www.cfnoob.com

• Convert the object to arraycollections

  I read in the forums when you return an XML element, Flex does not return the XML in a table but rather an object. I tried to put returnFormat = "array" in line with HTTPService but also to convert the object into a table according to 'getPhotoList' the use of this: event.result.gallery.photo = ArrayUtil.toArray (event.result.gallery.photo);
  
  I managed using both methods, suggestions?
  
  "< mx:HTTPService id ="photoListRequest"url =" ' list.php? type = customerImage "result =" getPhotoList (event) "method ="POST">
  < mx:request xmlns = "" >
  < user_id > {user_id} < / user_id >
  < / mx:request >
  < / mx:HTTPService >
  < mx:Script >
  <! [CDATA]
  [Bindable] private var fileXMLList:ArrayCollection;
  private void getPhotoList(event:ResultEvent):void {}
  photoXMLList = event.result.gallery.photo;
  }
  []] >
  < / mx:Script >

  Brad,

  Here is the solution that I found:

  private void getPhotoList(event:ResultEvent):void {}
  try {}
  photoXMLList = event.result.gallery.photo;
  }
  {catch(e:Error)})
  photoXMLList = new ArrayCollection();
  photoXMLList.addItem (event.result.gallery.photo);
  }
  }

• name of the object in a string

  I want to create an XML file I can change for different languages.  It contains the names of the fields that have the text and the text that they should be replaced by: for example. < name lang = "titleLabel" value = "This is the title of the app" / >.  I can read the XML rows in a table, but I can't understand how to use the name as object name:

  var labels: Array = new Array();
  var lblNumber:int = 0;
  for each (var lbl:XML of in langFile.children ())
  {
  Labels [lblNumber] = lbl.@name;

  How to use what is contained in the labels [1] under the name of the object? for example (labels[1].@name) .text = labels[1].@value

  }

  Use the scoreboard operator to force the flash to fix ropes to objects:

  This [[lblNumber] labels] .text =

• How to convert the object Bitmap to byteArray.

  Hi all

  I had a problem in the conversion of the bitmap object to. BMP file.

  (Real need: capture the screen shot and convert that turned to the screen.) BMP image and I have to keep this image in the SCARD

  I shouldn't use any PNGEncodedImage or JPEGEncodedImage )

  I capture the screen shot using the

  Bitmap BM = new Bitmap (width, height);

  Display.screenshot (WB);

  to get the data from [] bytes of this bitmap object that I use

  Byte [] _bytes = getBytesFromBitmap (bitmap);

  public byte [] getBytesFromBitmap (Bitmap bmp) {}
  try {}
  int height = bmp.getHeight ();
  int width = bmp.getWidth ();
  int [] rgbdata = new int [width * height];
  ByteArrayOutputStream Bos = new ByteArrayOutputStream();
  DataOutputStream back = new DataOutputStream (bos);
  Graphics g = new Graphics (bmp);
  bmp.getARGB(rgbdata,0,width,0,0,width,height);
  for (int i = 0; i)< rgbdata.length="" ;="" i++)="">
  If (rgbdata [i]! = - 1) {}
  dos.writeInt (i);
  back. Flush();
  //l++;
  }
  }
  Bos.Flush ();
  Return bos.toByteArray ();
  }
  catch (Exception ex) {}
  Dialog.Alert ("getBytesFromBitmap:" + ex.toString ());
  Returns a null value.
  }

  If I use this byte array in the Sub statement I get the "IllegalArgumentException".

  BMPEncodedImage.createEncodedImage (_bytes, 0, _bytes .length);

  all can help me how I can get the byte [] data from the bitmap object?

  import java.io.ByteArrayOutputStream;import java.io.DataOutputStream;import java.io.IOException;
  
  import javax.microedition.lcdui.Image;
  
  /** * @author Samuel Halliday */public final class BMPGenerator {
  
      /**     * @param image     * @return     * @throws IOException     * @see {@link #encodeBMP(int[], int, int)}     */    public static byte[] encodeBMP(Image image) throws IOException {        int width = image.getWidth();        int height = image.getHeight();        int[] rgb = new int[height * width];        image.getRGB(rgb, 0, width, 0, 0, width, height);        return encodeBMP(rgb, width, height);    }
  
      /**     * A self-contained BMP generator, which takes a byte array (without any unusual     * offsets) extracted from an {@link Image}. The target platform is J2ME. You may     * wish to use the convenience method {@link #encodeBMP(Image)} instead of this.     * 
       * A BMP file consists of 4 parts:-     * 
       * 
  header
       * 
  information header
       * 
  optional palette
       * 
  image data
       * 
       * At this time only 24 bit uncompressed BMPs with Windows V3 headers can be created.     * Future releases may become much more space-efficient, but will most likely be     * ditched in favour of a PNG generator.     *      * @param rgb     * @param width     * @param height     * @return     * @throws IOException     * @see http://en.wikipedia.org/wiki/Windows_bitmap     */    public static byte[] encodeBMP(int[] rgb, int width, int height)            throws IOException {        int pad = (4 - (width % 4)) % 4;        // the size of the BMP file in bytes        int size = 14 + 40 + height * (pad + width * 3);        ByteArrayOutputStream bytes = new ByteArrayOutputStream(size);        DataOutputStream stream = new DataOutputStream(bytes);        // HEADER        // the magic number used to identify the BMP file: 0x42 0x4D        stream.writeByte(0x42);        stream.writeByte(0x4D);        stream.writeInt(swapEndian(size));        // reserved        stream.writeInt(0);        // the offset, i.e. starting address of the bitmap data        stream.writeInt(swapEndian(14 + 40));        // INFORMATION HEADER (Windows V3 header)        // the size of this header (40 bytes)        stream.writeInt(swapEndian(40));        // the bitmap width in pixels (signed integer).        stream.writeInt(swapEndian(width));        // the bitmap height in pixels (signed integer).        stream.writeInt(swapEndian(height));        // the number of colour planes being used. Must be set to 1.        stream.writeShort(swapEndian((short) 1));        // the number of bits per pixel, which is the colour depth of the image.        stream.writeShort(swapEndian((short) 24));        // the compression method being used.        stream.writeInt(0);        // image size. The size of the raw bitmap data. 0 is valid for uncompressed.        stream.writeInt(0);        // the horizontal resolution of the image. (pixel per meter, signed integer)        stream.writeInt(0);        // the vertical resolution of the image. (pixel per meter, signed integer)        stream.writeInt(0);        // the number of colours in the colour palette, or 0 to default to 2n.        stream.writeInt(0);        // the number of important colours used, or 0 when every colour is important;        // generally ignored.        stream.writeInt(0);        // PALETTE        // none for 24 bit depth        // IMAGE DATA        // starting in the bottom left, working right and then up        // a series of 3 bytes per pixel in the order B G R.        for (int j = height - 1; j >= 0; j--) {            for (int i = 0; i < width; i++) {                int val = rgb[i + width * j];                stream.writeByte(val & 0x000000FF);                stream.writeByte((val >>> 8 ) & 0x000000FF);                stream.writeByte((val >>> 16) & 0x000000FF);            }            // number of bytes in each row must be padded to multiple of 4            for (int i = 0; i < pad; i++) {                stream.writeByte(0);            }        }        byte[] out = bytes.toByteArray();        bytes.close();        // quick consistency check        if (out.length != size)            throw new RuntimeException("bad math");        return out;    }
  
      /**     * Swap the Endian-ness of a 32 bit integer.     *      * @param value     * @return     */    private static int swapEndian(int value) {        int b1 = value & 0xff;        int b2 = (value >> 8 ) & 0xff;        int b3 = (value >> 16) & 0xff;        int b4 = (value >> 24) & 0xff;
  
          return b1 << 24 | b2 << 16 | b3 << 8 | b4 << 0;    }
  
      /**     * Swap the Endian-ness of a 16 bit integer.     *      * @param value     * @return     */    private static short swapEndian(short value) {        int b1 = value & 0xff;        int b2 = (value >> 8 ) & 0xff;
  
          return (short) (b1 << 8 | b2 << 0);    }
  
  }
  
  Found form the Link mentioned below:
  
  http://javablog.co.uk/2007/12/26/j2me-bitmap-encoder/
  

• convert the date to a string format

  date in Word format
  
  example:
  
  30 may-2013' as thirtieth may twenty thirteen.
  
  Thank you.

  Select to_char (to_date (30-may-2013 ',' Mon-DD-YYYY'), ' DDspth month year ") as double sample;

• How to convert the column of ROW using DBMS_REDIFINITION object type column

  Hi all
  Suppose I have the following table to convert:

  create table customer as select customer_id cid, cust_first_name name, cust_address street from customers;
  alter table customer modify cid primary key;

  I created the table based on the customers of the OE schema table, while the street column has cust_address_typ with the following attribute object type

  SQL> describe cust_address_typ
   Name                                     Null?     Type
   ----------------------------------------------------- -------- ------------------------------------
   STREET_ADDRESS                               VARCHAR2(40)
   POSTAL_CODE                                   VARCHAR2(10)
   CITY                                        VARCHAR2(30)
   STATE_PROVINCE                               VARCHAR2(10)
   COUNTRY_ID                                   CHAR(2)

  I want to convert the object attribute adresse_rue in a column of RDM. Consider the following temporary table:

  CREATE TABLE INT_CUSTOMER(
  CID NUMBER,
  NAME VARCHAR2(30),
  street varchar2(100)
  );

  First of all, I checked if the table can be redefined:

  --Verify if the table can be redefined
  BEGIN
  DBMS_REDEFINITION.CAN_REDEF_TABLE('OE','CUSTOMER',DBMS_REDEFINITION.CONS_USE_PK);
  END;
   4  /
  
  PL/SQL procedure successfully completed.

  But when I started the redefinition, I got an error:

  BEGIN
  DBMS_REDEFINITION.START_REDEF_TABLE(
  uname => 'OE',
  orig_table => 'CUSTOMER',
  int_table => 'INT_CUSTOMER',
  col_mapping => 'CID CID, NAME NAME, STREET CUST_ADDRESS_TYP(STREET_ADDRESS)'
  );
  END;
    9  /
  BEGIN
  *
  ERROR at line 1:
  ORA-00923: FROM keyword not found where expected
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 52
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 1646
  ORA-06512: at line 2

  What seemed to be the problem?
  
  Best regards
  Val
  
  Published by: Valerie good-natured October 9, 2011 21:43

  Have you tried this one:

  BEGIN
  DBMS_REDEFINITION.START_REDEF_TABLE(
  uname => 'OE',
  orig_table => 'CUSTOMER',
  int_table => 'INT_CUSTOMER',
  col_mapping => 'CID CID, NAME NAME,"CUSTOMER".STREET.STREET_ADDRESS STREET'
  );
  END;
  

  Looking at your trace file, I claim that when you use the call above to START_REDEF_TABLE, the inner workings of this procedure will create this SQL statement:

  select CID CID, NAME NAME,"CUSTOMER".STREET.STREET_ADDRESS STREET from "OE"."CUSTOMER" "CUSTOMER"
  

  (You can prove or disprove my claim by tracing it ;-)))

  And this statement has had an alias - even if the alias is the same as the name of the table...

• convert the format of output in text buffer

  I received an ASCII output a signal source Analyzer I would like to convert in a readable text format. In the vi attached (LV2009) chain of read buffer control contains the data that I get and I put a free label on the Panel before which contains the expected results. When I have catalogued in a single table, I had the right values, but every 3 values that I have received a number that probably is a conversion of a carriage return character. I could sort the table to convert the number to a string and each third \r\n value but it seems a silly way to solve this problem. There must be an easy way to do it. Any idea?

  Ben64

  Like a little more fun, I initially wanted to do this:

  

  A bit embarrassing that the function to build matrix does not deal with SGL, but for some reason any LV9 it throws at you:

  

  Consider this my report to Technical Support OR.

  Adding a constraint to DBL before building matrix kind of defeated the purpose, but solves the problem.

• How to convert ObjectProxy object [no one can answer this question?  :(]

  Hello

  Calling a web service with the resultFormat value e4x. When I get the result, it is in XML format. What I need is to convert it to a custom type, object of value (which is actually a class generated from WSDL). I couldn't find a way to do this. So I used a SimpleXMLDecoder to decode for a generic object. Now my problem is that all objects nested inside this generic object are of type 'ObjectProxy '. So I can't convert them my nested valuables.

  So now I finally need is one of the 2 following things:

  1. a way to convert the ObjectProxy to my custom type value object.

  Or

  2. a way to directly analyze the XML result to my type of Custom value object.

  Please let me know if I need to provide some details.

  Help, please... This one is really kill me now...

  Thanks in advance!

  I know the poster original for that matter will probably not get it, but it is not the intention of this post... I just spent the last 6 hours trying to find the answer to the question: How do I convert an ObjectProxy to my object?

  Well here is the answer for any other googlers who find this post (as it is on the first page of results for "objectproxy object cast")

  Let's say you have a service call which returns a generic object type.  "In the SOAP, you might see the xml tag resulting as.  In flex, it almost always will convert this to an ObjectProxy class.  You will find that out the object isn't exactly simple and cast to the desired type is also is no more.

  Here's how you do it, and it's actually VERY simple once you know what you need to do:

  First of all, you must convert the ObjectProxy in an object type.  To do this, you must use the namespace "object_proxy" itself.  Here's the code to do

  Import mx.utils.ObjectProxy;

  Import mx.utils.object_proxy;

  var myObjectProxy:ObjectProxy = new ObjectProxy (myStronglyTypedObject);

  var obj:Object = myObjectProxy.object_proxy::object;

  This code there will be 'myObjectProxy' and pull on the original object in a general object variable (NOTE: the reference to object is read only according to the docs.)  It is only half the battle though, as at the time, you still need to throw your object to return.  I've read in several sources that you can use a method "as MyType" to convert the object from there, but I couldn't get this to work.  Traditional molding (i.e. MyType (obj)) leads to a runtime error as well.  They can work for you if call proxy your object from an existing flex object, but will NOT work if you tire of an ObjectProxy response service.  Either way, however, the solution is just shorter to type in the case that you he shot of an intervention of service call:

  import com.adobe.serializers.utility.TypeUtility;

  obj = com.adobe.serializers.utility.TypeUtility.convertToStrongType (obj, MyType);

  (if you are unable to access this method, you should probably add the serializers.swc of the framework to your build path:)

  Adobe Flash Builder 4.5 root Directory\eclipse\plugins\com.adobe.flexbuilder.project_4.5.1.313231\dcradSwcs\4.5\libs\s erializers.swc

  This will convert your object to the type you want it to be.

  AND YOUR DONE.  No more looking for people to answer full and not more to convert your service calls to e4x instead.

  Now, if you want to know why it works but casting is not sticking around... If you don't like it, don't waste your time to read the rest of the present:

  Why that your other service calls can analyze data from a response xml SOAP at any predefined by the SOAP service, but casting this type proxy version does not work?

  Your service calls are generated dynamically from the SOAP data, then of course flex "just don't know" how to do... and your SOAP objects do not extend the object class... so what gives?

  If you look at the web service generated dynamically in flex code, you will see that each service call says what should be the result type.  Then the whole AbstractOperation (your client-side web service class) is given a convertResultHandler function that retrieves the data from the result and converts the type defined by the service.  You will not get very far just look at the code if it's away from the abstract.  But if you look at the code of serializers.swc update (you'll have to decompile it) will give you an idea of what it is that makes handler function.  Basically, this handler function takes and checks whether it is an ArrayCollection/table collection or an object and then differs from conversion of the object/table to separate the functions called 'convertToStrongType' and 'convertListToStrongType '.  These functions take a class in your object, convert it and return the past of conversion class.  Bingo.

  Now, you'll see that you can take this object and use the functions convertToStrongType and convertListToStrongType with the EFA serializers to run the conversions you need.  The advantage of this is that these functions are the SAME FUNCTIONS ACCURATE who manage the conversion of your objects in the webservice result, so you can pretty much bet that you will lose all the data like you would with reflection level unique and such utilities.

  As a side of the usefulness of this note.  If you have a c# return of web service which returns a type of list object, which means you can run in all kinds of different items in the same list, then you can use this in conjunction with a mark of the object function to determine the object type to perform conversions.

  I REALLY hope this helps some other people to save themselves from pulling their hair or lose whole days trying to figure the answer before moving on to some power of the wall facility that will make your code more complex!

• convert the string to type vCAC:vCACHost

  Hi all

  
  I have a client that wants to start a flood of vCO from an external source using the REST API of vCO. One of the arguments sent to the vCO workflow that will trigger, is the vCAC hostname.

  My question is - since the arguments acts as a channel of appeal REST, how to convert into a vCAC:vCACHost object in order to be used in a script in my stream.

  
  Thank you.

  Your customer can either pass a string representing the object to the REST API as described in this tutorial.

  Otherwise they can pass a string containing the host id and get the object vCACHost in the workflow like this:

  var vCACHosts = Server.findAllForType("vCACHost");
  
  for each (var vCACHost in vCACHosts) {
    if (vCACHosts.id==histId) {
     var matchingHost = vCACHosts;
    break;
    }
  }
  

  If there were many guests then I recommend using the entityManager to filter by ID and then by converting the entities back to object with the getInventoryObject() method as described in this article.

  1 problem, 3 solutions

• String to the object?

  I would like to achieve something underneath, in order to have a string value that I can convert to object. His reason is that I get the string from an external source values, I'm looking at an easy way to convert them into an object. It's probably pretty simple, but I can't figure out how to do this.
  
  var s:String = "V1:30, V2:72, V3:86, V4:55;
  var obj:Object = {s}; of course, this does not work, but you get the idea...

  woutek wrote:
  > I would like to achieve something underneath, in order to have a string value that I can
  > convert to object. His reason is that I get the string values
  > since an external source, so I'm looking for an easy way to convert them in a
  > object. It's probably pretty simple, but I can't figure out how to do this.
  >
  > var s:String = "V1:30, V2:72, V3:86, V4:55;
  > var obj:Object = {s}; of course, this does not work, but you get the idea...
  >

  If you mean you want obj to look like at {V1: 30, V2: 72, V3: 86, V4: 55},.
  and you know the format of your channels, it would probably work:

  function stringToObject(s:String):Object
  {
  var o: Object = {};
  for each (var pair: String in s.split (","))
  {
  var a: Array = pair.split(':');
  o [a [0]] = parseInt (a [1]);
  }
  Return to o;
  }

  Not necessarily efficient, but unless your strings are ridiculously long or
  you do this in a tight loop, it should be OK.

  -Adam

• Convert the string with number of floats a number

  How to convert the string as "- 8.9E - 03" to a number of TestStand?

  Thanks in advance

  Hello

  Try to use the Val() function

  In the expression, it looks like this

  People of the country

  .nValue = val (Locals.strValue)

  Locals.nValue = Val("-8.9E-03")

  Hope this helps

  Jürgen

• Convert the number to a HEXADECIMAL 4-digit string

  Hello

  I would like to know if it is possible to convert a number to a HEXADECIMAL string 4 digit.

  Now I convert the number to a table with ' generation array "and this table that I convert it with an"array of bytes to a string.

  While when I type in the number 30, the channel will show 1E (HEX, 2 digits).

  But when I type a number greater than 255, it continues to show FF (255)

  If I do the 'picture to build' bigger and add an element, the string indicates a 4 digit Hex number.

  Now, I would like to know how I can show one number, greater than 255 in the chain with 4 digits.

  So I actually need to divide the number in 2 tables before building the table, isn't it?

  I hope that you understand my purpose?

  So when I type in "1235", I want a string indicating "04E5" and not "FF".

  The function that you want to use is number to a hexadecimal string. Set the width of 4

  

  http://zone.NI.com/reference/en-XX/help/371361H-01/Glang/number_to_hex_string/

  Moreover, 0x04E5 is decimal 1 253

• How do to convert the string (with the Hex data) in number?

  Hello

  I use TestStand 3.5 to automate a few test cases associated with boot loader.

  The requirement is that I need to read the value in some places for specific address. The values of these addresses are stored in a hexadecimal format.

  We have a step customized in TestStand through which we can read these values by address, but she returns as the type "String".

  For example, the value to 0 x 0000008 is 000001 B 2, and he returned in Locals.Value_Read as "000001 B 2" in the string.

  Is it possible, I can convert the string "000001 B 2" to a number?

  I tried to use the function-> val (locals. Value_Read), but it is return 0 as TestStand figures that the input string is not representing the valid number.

  Please help me with this.

  Thank you and best regards,

  Niraj.

  Try: Val ("0 x" + Locals.Value_Read)