HELP: Phone won't turn on, completely insensitive

My Moto X (XT1058) has been fully charged and plugged.

When you use the Chrome browser, the screen went all black (as if I hit the power button), but the phone became completely unresponsive. No button or combinations of Chargers/cables anything.

I tried:

-Different Chargers and cables for the minutes and hours (but the phone was fully charged), no loading screens

-Plug on laptop, no recognition

-All FLIGHT and PWR key combinations for up to 3 minutes

Any other suggestions? or I am the GROUND?

Thank you

Chris

Well, after a few days of using my old Nexus S, I decided that the only chance to fix my phone would be to bite the bullet and get a new one. So yesterday, I picked up a used Moto X off kijiji for $100.

Before that I got the money, I tried to turn on the old phone one last time... Nothing.

Reloaded the new phone from the day to the next, and while he was starting this morning, I decided to try the phone again for s & g's, JUST held the power button for about 5 seconds and... LIFE! Starts perfectly, not 'optimization applications' or whatever it is, battery fully charged and no sign of what anyone ever be wrong.

So now I have two 2013 x bike!

In case someone has similar problems in the future, after the first day of load with different Chargers and based on each unique combination of button, he had sat the charger for two whole days before finally deciding to start normally.

Tags: Motorola Phones

Similar Questions

  • My phone fell and the phone won't turn on or charge

    My phone fell and the phone won't turn on or charge. What is the possible solution?

    Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the return of the Apple logo again?

    If this does not work, take it to an Apple store or a Service Provider licensed Apple to have it checked.

    If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

    Find an Apple authorized service provider

    Apple iPhone - contact Support - support

  • Bridge of Sony for Mac. wanted an update, and phone won't turn on now!

    Hello

    Today, I tried to transfer files from my phone to my Mac. When I plugged my phone the Sony Bridge for Mac asked me if I'd like to update so I clicked Yes and it started to be updated with my phone connected. Then out of it, my phone off and it won't turn on. It will only vibrate and display the Sony logo but won't go any futher. I tried the combination of flight + and start/stop button and many others, but nothing works! I need my phone very quickly at work, and I really don't want to lose all the files!

    Help, please!

    It sounds more like you had an update to the system firmware and you can have disconnected your phone that this process was going on - anything you can do I'm afraid to say is a repair of the system, but this will erase all data on your phone

  • Phone won't turn on or charge

    Hi all

    Less than a week ago, I bought a Xperia Z5.

    And today while you use (Internet I think), it stop with > 50% remaining battery. I couldn't activate it.

    I tried to recharge via USB and PC, did not work. Once back home, I loaded for like 40 minutes then tried to turn it on. He showed no signs of the load (the led blinks or stays red for a few seconds sometimes). I tried restarting of 120 seconds. I've never seen the loading icon. I tried the volume top + power button, took out my SD. Nothing. Should I try factory reset (CCP does not seem to recognize atm, even if I used it yesterday to copy my old phone, process that stopped in the middle and never finished), or should I bring it to the seller?

    Any help appreciated,

    Kind regards.

    Thanks for your help

    But my local dealer exchanged this morning...

    I have published this message yesterday before going to sleep, is there a way to close the topic because the issue slipped by the presence of a new phone?

  • Stop "Find my iPhone" what phone won't turn on!

    My daughter dropped her iPhone in the toilet yesterday. I have through Verizon/Asurion protection. They are sending me a new phone (for a $150 deductible) and they said I have to pay $500 if the "find my iPhone" feature doesn't is not turned off. I know full well that "AGFI" feature is on the phone 'on '. If I remove the phone in her iCloud account which will take care of it? Or, is there another way to stop the "AGFI? Thank you!

    dawnmschweitzer wrote:

    If I remove the phone in her iCloud account which will take care of it?

    It is correct.

  • iPhone 4 won't turn on completely. He goes from an Apple logo on a black screen with a loading wheel.

    Does this mean that the battery is completely dead? Is there a way I can fix it? I have pictures, texts, etc. that I really want to get back. Any help is appreciated, thanks.

    replacing the battery is $ 79 plus tax. Possible other hardware issues. I advise to take local apple retail store.

  • Computer won't turn on completely (black screen with blinking cursor) after installing windows updates

    8/7, the following updates have been installed correctly:

    Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

    Update definition for Windows Defender - KB915597 (definition 1.63.1021.0)

    Following this installation, the display resolution has been reset to be very low.  When you try to reset the resolution, I was alerted to a driver problem, so tried installing this in vain (below error code)

    Intel Corporation - display - Intel (r) G33/G31 Express Chipset Family

    Error details: Code 800703E3

    After that, he went to sleep the computer, but was unable to select 'sleep' (it is grayed out) but the stop keys option indicates that the updates were ready to install so I stop thinking which may help.  It was last night.  This morning, the computer was on, seen the screen DELL, then a black screen with flashing white cursor in the upper left corner.  I tried ctrl-alt-del, got the dell screen appears again, then black screen.  I tried ctrl-alt-del, thinking I could try one of the options key F at this time, but he won't even go to this point, the dell blank screen just screen.

    Any ideas would be very appreciated!  It is the second major problem that I had recently after updates vista install (the last time I temporarily lost access to all my files, because they were placed under a temporary user account that had been created!)

    Thank you!

    Hello

    You try to borrow the Vista DVD to any of your friends and do a repair (inplace upgrade) it might help you solve the problem.

    All the best,

    Geek

  • BlackBerry Blackberry Q10 Q10 does not back up and won't turn on completely.

    A few days ago my Blackberry touchscreen has stopped working so I got fixed. After that it would just turn. It would be stuck at the screen of boot/load of 100% and is not always driven despite hours of load. I tried to save but my blackberry link begins first 'prepare the backup' longer than usual and then stops giving me the message "backup did not try to see if the unit is unplugged. I tried everything and I am at my wits end. Need help. I want to just back up my data now and reset of my blackberry. Any help would be greatly appreciated.

    Tried many times, but failed. Managed to manually transfer all my media to my computer but lost the majority of my contacts and did a reset. Put me back up a bit in terms of data, but at least I can reuse my Q10.

  • Computer laptop Windows 7 won't turn off completely

    6 months ago, I bought a new laptop with windows 7 64 bit installed. has worked well until 2 weeks ago. whenever I stopped, she stays on the screen of closing until the battery is flat. When I turn the back says windows has recovered from an unexpected shutdown. any ideas coz im all that?

    Hello

    Try following the s method provided below and see if it helps:

    Method 1:

    It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135     

    Note: Once you have finished installing, follow step 7 article to start on normal startup.

    Method 2:

    You can't do a computer that runs Windows 7 stops or sleep

    http://support.Microsoft.com/kb/977307

    Also, try to run the troubleshooter of performance and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

    Method 3:

    Also check the event viewer

    Event Viewer is a tool that displays detailed information about important events on your computer.

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

    Hope this helps,

  • BlackBerry Smartphones please help, 9700 won't turn on

    As I was talking on my relatively new Bold 9700, she is just completely dead! The battery is charged but the screen and everything happened to be just black. It will not turn on. I removed the battery and put it back in and the only response that she led red coming for a few minutes then detach.

    Any suggestions please?

    Hi and welcome to the Forums!

    See this KB to see if any of the symptoms match yours:

    • KB18223 Behavior of the charge BlackBerry smartphone

    If the battery discharged spontaneously, that would actually cause for alarm. If your symptoms match something, then likely recommendation is to reload for a while (at least 2 hours, IMO) and then see if your BB is back to normal. If the behavior persists, consult a warranty evaluation.

    Good luck and let us know!

  • My phone won't turn on

    Hi all, I have a motorcycle E, my phone was at a table and spilled water after it dries up the phone and put it in the rice and still does not start, anyone know if will have a solution or never comes on, when I connect the charger only LED notification lights, thank you.

    Double wire closure. Post here.

    Mark

    Forums Manager

  • Backup to phone that won't turn on?

    I dropped my phone in water, this was not saved on iTunes or iCloud. The phone won't turn on or do anything when plugged into a computer. My main concern is to get my photos. It's an iPhone 6 and I have tried everything I know so he can turn it on (hold down the buttons, plug it into the wall, plug into computer, etc.).

    If I took the phone out, where I could find the map / is there a card that stores all the data of the photo?

    Is there a way to backup without turning on the phone? I've tried a few programs, but they do recognize that nothing was plugged.

    Or is there something that can be done to recover the photos, the phone is off?

    If you have not used 5 ways that Apple provides to save the pictures or the 3 ways to back up the phone, then there is no way to recover them. They are stored encrypted, so even if you can remove the chip memory (which is unlikely) you can not retrieve its content.

  • my 6 phone fell in water for about one second, tried to dry all day still won't turn. What can I do? Help, please

    my iphone 6 fell into the water. won't turn on after that I dried it all day. What should do? Help, please

    As you tried to turn it on it was still wet, the damage is done now.

    Now, your only alternative is to call Apple and make an appointment to examine.

    They will probably suggest that you buy one out of warranty replacement for her.

  • HP G62:. Hp G62, laptop won't turn on even after trying hard. Help

    My laptop won't turn. Home from work two days ago and I tried turning on but nothing works. I read through messages to hard test but failed. I don't hear any sounds on my laptop either. Can someone please help me understand what I need to do to get my laptop running. Thank you

    Thank you. . No light even after plug in the laptop. I've never seen a light on the power adapter even when he was working. Where is the light on the adapter? Please help I feel empty without my cell phone

  • just downloaded windows 7 ultimate throught (the anytime upgrade feature) and now it won't turn on... Please help

    just downloaded windows 7 ultimate throught (the anytime upgrade feature) and now it won't turn on... Please help

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

Maybe you are looking for

  • Journ.e Touch - where's the support?

    Hello. I'm very disgusting by Toshiba. There is no such thing as a Journ.E Touch support!It's impossible to reinitialize the object... If it stops to work, or crash Windows CE, you can throw! More than a week I'm looking for a solution, I am writing

  • HP Pavilion e020us 17: 10 Windows will not start

    I worked on a portable computer that no longer starts.   If I boot from the hard disk in the recovery partition I can't start there on the Windows partition.  I have a choice of Windows 10 of Volume 4, Windows 10 of Volume 4 (Yes it is listed twice)

  • I can't attach files in Windows live

    I can't attach files in Windows live. When I try, the following message-"this program is currently in use. Shut up and try again"However, there is nothing else open on my PC. Interestingly, I only face this problem when I'm on iMac, otherwise it work

  • 9cell x 220 mini dock compatibility more series 3

    Hi all I have a x 220 9 cells and what to buy the mini dock more series 3. However, I'm not sure if 9elements x 220 is compatible with the dock. Anyone know or have experience? Thank you!

  • problem discussion field?

    Hello I implement a BB mobile app. the application is almost complete bt has a problem each time I move the focus or the cursur of any domain, domain background is the change in the color white. What should I do pls help...