Converter 5.0 fails at the first stage the conversion

Hello, I am trying to convert physical ENT W2K8 64bits in virtual server, but I got an error occurred during the coversion: 'unknown Exceptions. I use VMware vCenter Converter Standalone server 5.0.0 installed on the same server as VMware vCenter Server 5.0.0. I have two hosts in cluster, one is ESXi 5.0.0 another ESX 4.1.0 but I think that the problem exists not in hosts. Maybe someone has an idea how to solve my problem?

Hello

Ask you to check 4 points

(1) cross weather check NetBIOS over TCP/IP is enabled in your physical server.

(2) Windows Installer, Windows module installer and WMI Performance fit and the virtual disk services are running.

(3) service of Windows Firewall is stop

(4) any of the below mention of the ports are open in the firewall.

Source
Destination
TCP ports
UDP ports
Notes
Server Converter
Source computer
445, 139, 9089 or 9090
137, 138
If the source computer uses NetBIOS, port 445 is not necessary. If NetBIOS is not used, ports 137, 138, and 139 are not required. When in doubt, make sure that none of the ports are blocked.
9089 port is used for the Converter Standalone versions and 9090 is used for the converter plugin.
Note: unless you have installed the Converter to the source computer server, the account used for the authentication of the source computer must have a password, the source computer must be network enabled file sharing, and it can't use Simple file sharing.
Server Converter
VirtualCenter
443
Required only if the target of conversion is VirtualCenter.
Client converter
Server Converter
443
Only necessary if a custom installation has been completed and the portions of server and client of the converter are on different computers.
Source computer
ESX
443, 902
If the target of conversion is VirtualCenter, single port 902 is required.

Tags: VMware

Similar Questions

  • VMware converter 5.5 failed with the error failed to partition the disk of destination

    I tried to convert the centos linux server physical to virtual. However, I received an error message at 1% as below,

    Error: Impossible to partition the disk of destination.

    FAILED: an error occurred during conversion: "CalculateGPTPartitionLocations failed!"


    Conversion of GPT partition is available vcenter converter 5.1 and higher, so the GPT partition on the source server will not be a problem.

    Tried several ways as the storage of data changing but still receive the same error message.

    Anyone encounter this before?

    Hello

    Unfortunately there is a bug with Linux P2V Converter when the destination drive is greater than 2 TB (is not whether TPG, it's size). Sorry for the inconvenience.

    The solution would be to reduce the volumes instead of destination and/or their distributed on multiple disks. Another solution would be to leave unchecked high-volume and clone them manually after the conversion.

    Another misfortune is that these workaround solutions are not possible in your case - the root volume occupies approximately 4.3 TB, and the two 'start-up' and '-' are needed to perform a conversion with the reconfiguration.

    The options I can think of are:

    -make a manual P2V, i.e. to create the destination (with partitions, logical volumes and base) computer created and formatted, clone the data (for example the converter uses tar via ssh) and manually configure the virtual machine. The final step is, fixing/etc/fstab, installation of GRUB and rebuild the initrd image

    -install new and copy data

    -Optionally divides the volume of root on the source machine if possible and then convert it. For example, to add a new drive temporarily and move some data so that all volumes become smaller than 2 TB.

    Kind regards

    Plamen

  • Cannot convert win2k server - fails with the boot.ini on the version 3 and 4 error!

    Hello

    I am trying to convert an old win 2000 Server on an esx server, and I'm having a little trouble.  I am trying to run the converter and version 3 already tried with no luck.  On version 3, it manages at the end, think 97% I think and fails.  When I look in the logs of the converter, it seems to resemble a mistake with the boot.ini file.  I left the server for some time and today I have just spotted that the new version of the converter is out and although I'd give it a try.

    Unfortunately, I will have a chance to convert the server again.  It is not the last step.  Ive joined the output of the converter v4 logs.

    Here are the contents of the boot.ini file:

    boot loader

    Timeout = 0

    default = multi (0) disk (0) rdisk (0) partition (2) \WINNT

    "multi (0) disk (0) rdisk (0) partition (2) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

    I would appreciate any advice or tips that I've been struggling with this and I have to get the server took off the old hardware that crack, on which it is running.

    Thanks, much appreciated

    "multi (0) disk (0) rdisk (0) partition (1) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

    Error 1450 (hive loading error: insufficient system resources exist to complete the requested service (1450)) temporary loading hive
    .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE under the name of the mntApi181664643429986496 key.

    Unable to load the registry hive
    .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE, error 0x5aa.

    23202 error when you open the software hive

    Cannot read the news of the OS on the system disk: 23202

    You must increase the size limit of the registry on the source. For more details, see: Conversion failed with 1450 PlatformError under Windows 2000 or NT (1005979).

    Please award points if that's the right answer.

  • can not get the pass first stage of conversation! in Red Faction: Guerrilla

    He walks for a short period, he points to the sky (no airship appears) then there begin to walk around, while im stuck, only able to look around.

    Does anyone have a solution to this?

    Check your Games for Windows Live in the control panel and uninstall who said not "Redistributable". It has passed me this point and I can pass the level, however can not get any further.  This seems to be a game very buggy Windows.

    http://forums.steampowered.com/forums/showthread.php?t=1324709

  • Lost in the conversion?

    I made a virtual machine in Fusion who works. (To the point of configuring basic system)

    I converted to a Fiction with the conversion tool

    Deployed to the FVO with vSphere Client on Windows

    Commissioning under my ESXI server, it only gives Apple Boot and a spinning wheel.

    Where to find what's wrong?

    In collaboration with the export of eggs on the Fusion 8 Pro.

  • OLIVIER 11.1.1.7.1 - load Plan "From field only and charge (SDE and SIL)" fails at the first stage

    Hello

    I'm BIAPPS 11.1.1.7.1 configuration and her charge leading "extract domain only and charge (SDE and SIL)" (started in Confugration Manager) fails with the following error.

    ODI-1519: series step 'Load start Plan (InternalID:683500)' failed because step 'Refresh Global Variable (InternalID:684500)' child is in error. ODI-1529: updating of the variable 'BIAPPS.13P_CALENDAR_ID' failed: to select WHEN "Refresh of the Global Variable" in (select distinct group_code from C_PARAMETER_VALUE_FORMATTER_V where PARAM_CODE = '13P_CALENDAR_ID') THEN (select param_value in the C_PARAMETER_VALUE_FORMATTER_V where PARAM_CODE = '13P_CALENDAR_ID' and group_code = 'Global Variable Refresh' and datasource_num_id = ' #BIAPPS.) WH_DATASOURCE_NUM_ID') ELSE (select param_value in the C_GL_PARAM_VALUE_FORMATTER_V where PARAM_CODE = '13P_CALENDAR_ID' and datasource_num_id = ' #BIAPPS.) WH_DATASOURCE_NUM_ID') END of the double ODI-1533: Error refreshing variable 'BIAPPS.13P_CALENDAR_ID': could not get a link to the logical schema "CM_BIAPPS11G" using the OVERALL context.

    Investigation when I looked for info of logical connection diagram CM_BIAPPS11G (Physical schema BIAPPS_BIACOMP) in the topology Manager, JDBC connection string is empty and name of user and password is set up. My questions are so

    (1) is this a normal behavior that CM_BIAPPS11G receive the JDBC connection string & name of user and password of dynamically at run time?

    (2) If yes then how this string is passed and where it get stored?

    (3) I'm tempted to the name of user and password string / JDBC hardcode in the ODI topology manager and kickoff of work load here. Do you see any risk in doing this?

    Any pointer/suggestion will be highly appreciated.

    Thanks and greetings

    JDBC and name of username/password used to store in rather logical physical then diagram... its ok to hardcode those details under physical schema...

    Just logic diagram retrieve this information at the time of execution to load data in temporary tables...

    Please let me know if I'm wrong...

    See you soon!

    SH! going

  • Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

    Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

    Hi sdr2014,

    I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

    So, let's try this:

    If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

    Please let us know how it goes.

    Best,

    Sara

  • Conversion of physical Windows 7 machine fails during the reconfiguration with converter.fault.FileCreationFault

    Hello

    first of all, thank you for providing tools such as vCenter Converter for free.

    I tried to convert a physical machine to Windows 7 using the current vCenter Converter Standalone (version = 4.3.0 build = build-292238). The target of the conversion is an external USB disk. I am to convert the entire machine, including a disc of about 280 GB in size.

    The conversion takes more than 24 hours, but seems to work quite well. Right after training is converted (to about 98% of the whole process), the conversion fails during the reconfiguration with the following error message:

    Unexpected exception: converter.fault.FileCreationFault

    -ERROR - convert: converter.fault.FileCreationFault

    {(converter.fault.FileCreationFault)

    dynamicType = < unset >

    faultCause = (vmodl. NULL in MethodFault),

    file ="
    .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$ «»

    MSG = ""

    }

    There is no other message log of the recent in the converter - server.log. The converter - worker.log says:

    from reconfiguring the system...

    using temp dir C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig

    ReconfigurationTransaction: cached reviews system volume

    LocalPathToGuestSystemFolder:
    .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\

    LocalUndoFolder:
    .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$

    Cannot create undo file

    Cleaning up the C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory...

    TaskImpl failed with MethodFault::Exception: converter.fault.FileCreationFault

    Task failed:

    Scheduled timer cancelled, succeeds StopKeepAlive

    Completed task: Task 3

    InternalTask2VmomiTaskAdapter updates, States: 4, percentage: 0, xfer rate (Bps): < unknown >

    Creation of vmx file Analyzer

    BaseParserImpl::Parse Config info is not cached

    F:\VM\wartberg\wartberg.vmx analysis

    NIC has no info support, unable to determine connectionType

    NIC has no info support, unable to determine connectionType

    NIC has no info support, unable to determine connectionType

    NIC has no info support, unable to determine connectionType

    NIC has no info support, unable to determine connectionType

    NIC has no info support, unable to determine connectionType

    Registry hive
    . \vstor2-mntapi10-shared-468030AD0004C435020000000C000000
    Boot\BCD is responsible under the name mntApi397493888030118019

    Error 13 read the value of the element of key mntApi397493888030118019\Objects\ {9dea862c-5cdd-4e70-acc1-f32b344d4795} \Elements\24000001

    MntApi397493888030118019 hive unloaded

    Registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi398445489630118019

    2 error reading value CSDVersion key mntApi398445489630118019\Microsoft\Windows NT\CurrentVersion

    2 error reading information SP

    CurrentType key is multiprocessor free

    2 error reading CurrentType mntApi398445489630118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

    2 error reading 64 bits of information, probably not a 64-bit system

    the product name is Windows 7 Home Premium

    Registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi404763500730118019

    Error reading the mntApi404763500730118019\ControlSet001\Services\vmxnet - 2.

    Error 2 vmxnet information, assuming that vmxnet is not installed

    MntApi404763500730118019 hive unloaded

    MntApi398445489630118019 hive unloaded

    Registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi406994304730118019

    MntApi406994304730118019 hive unloaded

    Registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi419224726130118019

    2 error reading value CSDVersion key mntApi419224726130118019\Microsoft\Windows NT\CurrentVersion

    2 error reading information SP

    CurrentType key is multiprocessor free

    2 error reading CurrentType mntApi419224726130118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

    2 error reading 64 bits of information, probably not a 64-bit system

    the product name is Windows 7 Home Premium

    Registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi425417937030118019

    Error reading the mntApi425417937030118019\ControlSet001\Services\vmxnet - 2.

    Error 2 vmxnet information, assuming that vmxnet is not installed

    MntApi425417937030118019 hive unloaded

    MntApi419224726130118019 hive unloaded

    Registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi427773541230118019

    MntApi427773541230118019 hive unloaded

    Failed to get the volume mount points 640 (03 = * 00 > 7000000000000: 4146 (type = 2, code = 259))

    VMOUNT library: 1450 error communication error with the pilot while

    Error 1016 (hive to load error: unknown error 1016 (0x3f8) (1016)) temporary hive loading
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE under the name of the mntApi367215230118020 key.

    Unable to load the registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE, error 0x3f8.

    Error 16258 when you open the software hive

    Failed to get the volume mount points 640 (03 = * 5320000000:00404, 16258 (type = 2, code = 1016))

    MNTAPI Info OS: Microsoft Windows 7 Home Premium edition: root of home: Windows Service Pack: worm 0: 6.1

    OS resides on the disk partition 2 F:\VM\wartberg\wartberg.vmdk path

    BaseComputerImpl::Open configuration file: F:\VM\wartberg\wartberg.vmx

    WorkerConvertTask: production bundle task agent for task with id = 'task 3 '.

    bundle of newspaper http://Converter.Agent.DiagnosticManagerImpl[task-3] Generating task.

    http://Converter.agent.DiagnosticManagerImpl creation bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

    http://Converter.agent.DiagnosticManagerImpl adjusted bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

    WorkerConvertTask: recovery agent special newspaper bundle to "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip".

    http://Converter.agent.DiagnosticManagerImpl recovery bundle of newspaper with key ' task-3 - qfyxaphl.zip "at offset = '0' and max size ="11155.

    WorkerConvertTask: Bundle successfully retrieved from "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip"

    Task failed:

    Scheduled timer cancelled, succeeds StopKeepAlive

    Completed task: task-1

    bundle of newspaper http://Converter.Worker.DiagnosticManagerImpl[task 1] Generating task.

    As the conversion took more than 24 hours, I would be happy to learn how to avoid this problem or even how to save the VM already created (I don't know if this is possible, but at least the virtual machine appears to be underway, but then crashes saying that a required device is not present).

    Any help is appreciated!

    Thank you

    nepper

    OK - I'll upload versions changed in maybe 15 minutes

    muss weg kurz

    _________________________

    VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  • Cordova app fileTransfer.download fails on the first attempt

    Guys it's been a week I tried to solve this problem.

    I have this app in Cordoba that downloads a number of images in the local directory and does well on Android and iOS. FileTransfer should work perfectly on BB10 as well, but the download fails with the error code 1 first time the application is run.

    Oddly enough the download succeeds second time I run the application.

    Here's my quick snippet of the application that works on other platforms

    window.requestFileSystem = window.requestFileSystem | window.webkitRequestFileSystem;
    window.requestFileSystem (LocalFileSystem.PERSISTENT, 0, fileSystemSuccess, fileSystemFail);
            
    function fileSystemSuccess (fileSystem) {}
    var FP = fileSystem.root.toURL () + "category of xyz.jpg";
    fileTransfer var = new FileTransfer();
    fileTransfer.download (CAT [num], fp,
    {function (Entry.)}
    Alert ("full download:" + entry.fullPath);
    createCategoryCache (cat, num + 1);
    },
    {function (Error)}
    Alert ("source of the download error" + error.source);
    Alert ("download error target" + error.target);
    Alert ("download error code" + error.code);
    }
    );
    }

    First, this application runs after installation, the code goes into error with the settings below:

    Error.source is null

    Error.Target is null

    Error.code isn't a numebr but a ProgressEvent object instance. Further investigation of the ProgressEvent, it shows that
    ProgressEvent.percentage is 0
    ProgressEvent.loaded is 0
    ProgressEvent.totl is correctly reported the size in bytes of the file to be downloaed.

    Next time you run again the code above and the download is successful, no problem at all

    Can someone please shed some light on this subject? I tried everything I could do.

    For example

    I tried to use cordova.file.dataDirectory instead of fileSystem.root.toURL)

    I tried to use blackberry.io.sharedFolder instead of fileSystem.root.toURL)

    In any case, the behavior is the same. Failure to try a percentage 0

    Success on 2 with full download attempt.

    Any help will be much appreciated, this project is already too late.

    Hello

    There is a known issue, write files using the latest file plugin for all other iOS and Android platforms.

    This has been fixed and a new version of the plugin is underway.

    Until it is officially released, you can get the update from git.

    cordova plugin rm org.apache.cordova.file-transfer
cordova plugin rm org.apache.cordova.file
cordova plugin add https://git-wip-us.apache.org/repos/asf/cordova-plugin-file.git
cordova plugin add org.apache.cordova.file-transfer

  • Why when converting a TIFF file to PDF, only the first page is the conversion?

    Why, when you convert a tiff to pdf file, only the first page is the conversion?  Never had this problem before.

    Hi steves18035157,

    Problem has been reported as a bug. Our team of engineers working in priority to get this fixed number.

    Kind regards
    Nicos

  • After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

    After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

    What can I do?

    Have you tried what he says in the link I provided?

    or

    A chat session where an agent can remotely look inside your computer can help

    Cloud creative support chat (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • Conversion fails with the error: COULD not: - ERROR - convert: converter.fault.FileCreationFault

    Hello, I try to convert a windows 2003 server of citrix server to vmware (the last of them succesfull 20).

    The job runs up to 95% one error:

    "Create von ' \\.\vstor2-mntapi10-shared-D587D58700001000000000000B000000\$Reconfig nicht possible."

    Logfile by saying:

    2013 04-07 T 14: 14:20.752 + 02:00 [error 12632 'Default'] [task, 350] [LRO] Unexpected Exception: converter.fault.FileCreationFault
    2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [task, 379] [task-72] - ERROR - convert: converter.fault.FileCreationFault
    -> (converter.fault.FileCreationFault) {}
    -> dynamicType = < unset >
    -> faultCause = (vmodl. NULL in MethodFault),
    -> file = "\\.\vstor2-mntapi10-shared-D587D587000010000000000005000000\$Reconfig$"
    -> msg = ""
    ->}
    2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 267] retrieved taskInfo to "converter.task.Task:task - 72" mapping to "converter.task.Task:task - 72".»
    2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 307] the task with id = "task-72" proved to be a task 'recent '.
    2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 321] no existing group of newspaper found to task with id = "task-72. The task is still 'young' so a bundle of newspapers going now is assigned.
    2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 790] recovery job related diagnostic for the tasks of server with id = "task-72.
    2013 04-07 T 14: 14:20.925 + 02:00 [10056 "Default" info] passage work 0 "job-72" completed with an error. -struct Converter::Server:Job:JobExecutor:SchedulerUpdateSpec __thiscall Converter::Server:Conversion: ("d:/build/ob/bora-875114/bora/sysimage/lib/converter/server/conversion/conversionJobExecutorImpl.cpp:405")
    2013 04-07 T 14: 14:21.125 + 02:00 [10056 "Default" info] suspended 1 elements of Planner for employment (job-72) - __thiscall Sub Converter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,class_Converter::VdbConnection_&) ("d:/build/ob/bora-875114/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:828")
    I run vCenter Converter Standalone 5.01 version 875114
    I tried to erbuild the mbr, the boot sector and the boot.ini, but no success yet a screen is blue with 0x00000007b
    any new idea

    Yes, something is not in communication with the pilot vstor2:

    2013 04-07 T 14: 13:11.545 + 02:00 [info 09908 "Default"] [, 0] Vmount library: 1450 error communication error with the pilot while
    2013 04-07 T 14: 13:11.545 + 02:00 [warning 07680 'Default'] [, 0] error 999 (hive to load error: unknown error 999 (0x3e7) (999)) temporary hive loading

    1450 error is "insufficient system resources exist to complete the requested service."

    999 error is "error performing a paging operation."

    Both are unusual. Try the task set up on destination VM, if the task fails you will need to restart the source machine and try to restart the conversion.

    HTH

    Just found/3 GB switch in your boot.ini file, there are rumors that sometimes you should remove this switch for successful conversion: http://communities.vmware.com/message/1708679#1708679

  • 4 converter fails with the error/var on linux P2V?

    4 converter fails with the error/var on linux P2V? All I have is General info... stab in the dark... any help?

    "filesystem copy sh did not exit after 36 minutes" "exception caught during the copy of volume" disassemble slice

    Most likely, you will need enable sparse file support:

    http://www.VMware.com/support/converter/doc/releasenotes_conv40.html#51

    http://KB.VMware.com/kb/1008303

    (If your question has been resolved please check the responses as 'Useful' or 'Correct').

  • DAC: task failed during the ETL for financial applications

    I'm looking for my first ETL on OLIVIER 7.9.6.4

    I use Oracle EBS 12.1.1 as source system.

    the ETL full 314 tasks successfully, but it fails at the task named:

    'SDE_ORA_GL_AR_REV_LinkageInformation_Extract '.

    DAC error log:

    =====================================

    STD OUTPUT

    =====================================

    Informatica (r) PMCMD, version [9.1.0 HotFix2], build [357.0903], 32-bit Windows

    Copyright (c) Informatica Corporation 1994-2011

    All rights reserved.

    Called Wed Sep 18 09:46:41 2013

    Connected to the Service of integration: [infor_int].

    File: [SDE_ORAR1211_Adaptor]

    Workflow: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]

    Instance: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]

    Mapping: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract]

    Session log file: [C:\Informatica\server\infa_shared\SessLogs\. SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log]

    Success of the source lines: [0]

    Source has no lines: [0]

    Target lines of success: [0]

    Target lines failed: [0]

    Number of errors in transformation: [0]

    First error code [4035]

    First error message: [[error SQL RR_4035

    ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier

    Database driver error...

    Function name: run

    Stmt SQL: SELECT DISTINCT

    DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

    DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

    AELINE. ACCOUNTING_CLASS_CODE,

    GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

    GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

    AELINE. AE_HEADER_ID AE_HEADER_ID,

    AELINE. AE_LINE_NUM AE_LINE_NUM,

    T.LEDGER_ID LEDGER_ID,

    T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

    JBATCH.NAME BATCH_NAME,

    JHEADER.NAME HOSTHEADERNAME,

    BY. END_DATE,

    AELINE. CODE_COMBINATI]

    Task run status: [failure]

    Integration service: [infor_int]

    The integration of Service process: [infor_int]

    Grid integration Service: [infor_int]

    ----------------------------

    Name of node [node01_AMAZON-9C628AAE]

    Fragment of preparation

    Partition: #1 [Partition]

    Instance of transformation: [SQ_XLA_AE_LINES]

    Transformation: [SQ_XLA_AE_LINES]

    Apply the lines: [0]

    Number of rows affected: [0]

    Rejected lines: [0]

    Throughput(Rows/sec): [0]

    Throughput(bytes/sec): [0]

    Last [16004] error code, message [ERROR: prepare failed.: []]

    ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier

    Database driver error...

    Function name: run

    Stmt SQL: SELECT DISTINCT

    DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

    DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

    AELINE. ACCOUNTING_CLASS_CODE,

    GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

    GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

    AELINE. AE_HEADER_ID AE_HEADER_ID,

    AELINE. AE_LINE_NUM AE_LINE_NUM,

    T.LEDGER_ID LEDGER_ID,

    T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

    JBATCH.NAME BATCH_NAME,

    JHEADER.NAME HOSTHEADERNAME,

    BY. END_DATE,

    AELINE. CODE_CO]

    Departure time: [Sat Oct 18 09:46:13 2013]

    End time: [Sat Oct 18 09:46:13 2013]

    Partition: #1 [Partition]

    Instance of transformation: [W_GL_LINKAGE_INFORMATION_GS]

    Transformation: [W_GL_LINKAGE_INFORMATION_GS]

    Apply the lines: [0]

    Number of rows affected: [0]

    Rejected lines: [0]

    Throughput(Rows/sec): [0]

    Throughput(bytes/sec): [0]

    Last error code [0], message [no errors].

    Departure time: [Sat Oct 18 09:46:14 2013]

    End time: [Sat Oct 18 09:46:14 2013]

    Disconnection of Service integration

    Completed at Wed Sep 18 09:46:41 2013

    -----------------------------------------------------------------------------------------------------

    Informatica session log files:

    DIRECTOR > VAR_27028 use override the value [DataWarehouse] session parameter: [$DBConnection_OLAP].

    DIRECTOR > VAR_27028 use override the value [ORA_R1211] for the session parameter: [$DBConnection_OLTP].

    DIRECTOR > VAR_27028 use override the value [.] SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log] for the session parameter: [$PMSessionLogFile].

    DIRECTOR > VAR_27028 use override the [26] value for parameter mapping: [$DATASOURCE_NUM_ID].

    DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_ID].

    DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_TYPE].

    DIRECTOR > VAR_27028 use override value for the parameter mapping]: [$$ Hint1].

    DIRECTOR > override VAR_27028 use value [01/01/1970] parameter mapping: [$INITIAL_EXTRACT_DATE].

    DIRECTOR > override VAR_27028 use value [01/01/1990] parameter mapping: [$LAST_EXTRACT_DATE].

    DIRECTOR > VAR_27028 use override value [1] to parameter mapping: [$LEDGER_ID_LIST].

    DIRECTOR > VAR_27028 use override the value ["NONE"] parameter mapping: [$LEDGER_TYPE_LIST].

    DIRECTOR > session initialization of TM_6014 [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] at [Sat Oct 18 09:46:13 2013].

    DIRECTOR > name of the repository TM_6683: [infor_rep]

    DIRECTOR > TM_6684 server name: [infor_int]

    DIRECTOR > TM_6686 folder: [SDE_ORAR1211_Adaptor]

    DIRECTOR > Workflow TM_6685: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] running Instance name: Id series []: [2130]

    DIRECTOR > mapping TM_6101 name: SDE_ORA_GL_AR_REV_LinkageInformation_Extract [version 1].

    DIRECTOR > TM_6963 pre 85 Timestamp compatibility is enabled

    DIRECTOR > the TM_6964 Date of the Session format is [HH24:MI:SS DD/MM/YYYY]

    DIRECTOR > TM_6827 [C:\Informatica\server\infa_shared\Storage] will be used as the storage of session directory [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full].

    DIRECTOR > cache CMN_1805 recovery is removed when running in normal mode.

    DIRECTOR > CMN_1802 Session recovery cache initialization is complete.

    DIRECTOR > configuration using [DisableDB2BulkMode, Yes] TM_6708 property

    DIRECTOR > configuration using [OraDateToTimestamp, Yes] TM_6708 property

    DIRECTOR > configuration using [overrideMpltVarWithMapVar Yes] TM_6708 property

    DIRECTOR > TM_6708 using the configuration property [SiebelUnicodeDB, [APPS] @[54.225.65.108:1521:VIS] [DWH_REP2]@[AMAZON-9C628AAE:1521:obiaDW1]]

    DIRECTOR > TM_6703 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] is headed by [node01_AMAZON-9C628AAE], version [9.1.0 HotFix2] 32-bit integration Service, build [0903].

    MANAGER > PETL_24058 Running score of the Group [1].

    MANAGER > initialization of engine PETL_24000 of parallel Pipeline.

    MANAGER > PETL_24001 parallel Pipeline engine running.

    MANAGER > session initialization PETL_24003 running.

    MAPPING > CMN_1569 Server Mode: [ASCII]

    MAPPING > code page of the server CMN_1570: [MS Windows Latin 1 (ANSI), superset of Latin1]

    MAPPING > TM_6151 the session to the sort order is [binary].

    MAPPING > treatment of low accuracy using TM_6156.

    MAPPING > retry TM_6180 blocking logic will not apply.

    MAPPING > TM_6187 Session focused on the target validation interval is [10000].

    MAPPING > TM_6307 DTM error log disabled.

    MAPPING > TE_7022 TShmWriter: initialized

    MAPPING > Transformation TE_7004 Parse WARNING [IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',

    IIF (UPG_BATCH_ID > 0,

    SOURCE_TABLE | '~' || DISTRIBUTION_ID,

    SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),

    SOURCE_TABLE | '~' || DISTRIBUTION_ID)

    ]; transformation continues...

    MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.

    ... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',

    IIF (UPG_BATCH_ID > 0,

    SOURCE_TABLE | '~' || > > > > DISTRIBUTION_ID < < < <.

    SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),

    SOURCE_TABLE | '~' || DISTRIBUTION_ID)

    < < WARNING PM Parse > > [|]: operand is converted to a string

    ... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',

    IIF (UPG_BATCH_ID > 0,

    SOURCE_TABLE | '~' || DISTRIBUTION_ID,

    SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | (> > > > DISTRIBUTION_ID < < < <).

    SOURCE_TABLE | '~' || DISTRIBUTION_ID)

    < < WARNING PM Parse > > [|]: operand is converted to a string

    ... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',

    IIF (UPG_BATCH_ID > 0,

    SOURCE_TABLE | '~' || DISTRIBUTION_ID,

    SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),

    SOURCE_TABLE | '~' || (> > > > DISTRIBUTION_ID < < < <)

    ]; transformation continues...

    MAPPING > Transformation TE_7004 Parse WARNING [JE_HEADER_ID |] '~' || JE_LINE_NUM]; transformation continues...

    MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.

    ... > > > > JE_HEADER_ID < < < < | '~' || JE_LINE_NUM < < PM Parse WARNING > > [JE_LINE_NUM]: operand is converted to a string

    ... JE_HEADER_ID | '~' || [> > > > JE_LINE_NUM < < < <]; transformation continues...

    MAPPING > Transformation TE_7004 Parse WARNING [AE_HEADER_ID |] '~' || AE_LINE_NUM]; transformation continues...

    MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.

    ... > > > > AE_HEADER_ID < < < < | '~' || AE_LINE_NUM < < PM Parse WARNING > > [AE_LINE_NUM]: operand is converted to a string

    ... AE_HEADER_ID | '~' || [> > > > AE_LINE_NUM < < < <]; transformation continues...

    MAPPING > TM_6007 DTM initialized successfully for the session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]

    DIRECTOR > PETL_24033 all the DTM connection information: [< NO >].

    MANAGER > PETL_24004 from the tasks before the session. : (My Sep 18 09:46:13 2013)

    MANAGER > task PETL_24027 before the session completed successfully. : (My Sep 18 09:46:13 2013)

    DIRECTOR > PETL_24006 from data movement.

    MAPPING > Total TM_6660 Buffer Pool size is 12582912 bytes and block size is 128000 bytes.

    READER_1_1_1 > DBG_21438 Reader: Source is [54.225.65.108:1521/VIS], [APPS] users

    READER_1_1_1 > BLKR_16003 initialization completed successfully.

    WRITER_1_ * _1 > WRT_8146 author: target is the database [AMAZON - 9C628AAE:1521 / obiaDW1], [DWH_REP2], loose [on] mode users

    WRITER_1_ * _1 > WRT_8106 WARNING! Session Mode Bulk - recovery is not guaranteed.

    WRITER_1_ * _1 > target WRT_8124 W_GL_LINKAGE_INFORMATION_GS of Table: SQL INSERT statement:

    INSERT INTO W_GL_LINKAGE_INFORMATION_GS(SOURCE_DISTRIBUTION_ID,JOURNAL_LINE_INTEGRATION_ID,LEDGER_ID,LEDGER_TYPE,DISTRIBUTION_SOURCE,JE_BATCH_NAME,JE_HEADER_NAME,JE_LINE_NUM,POSTED_ON_DT,GL_ACCOUNT_ID,SLA_TRX_INTEGRATION_ID,DATASOURCE_NUM_ID) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)

    WRITER_1_ * _1 > connection WRT_8270 #1 target group consists of target (s) [W_GL_LINKAGE_INFORMATION_GS]

    WRITER_1_ * _1 > WRT_8003 writer initialization complete.

    READER_1_1_1 > BLKR_16007 player run began.

    READER_1_1_1 > RR_4029 SQ [SQ_XLA_AE_LINES] User Instance specified SQL query [SELECT DISTINCT

    DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

    DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

    AELINE. ACCOUNTING_CLASS_CODE,

    GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

    GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

    AELINE. AE_HEADER_ID AE_HEADER_ID,

    AELINE. AE_LINE_NUM AE_LINE_NUM,

    T.LEDGER_ID LEDGER_ID,

    T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

    JBATCH.NAME BATCH_NAME,

    JHEADER.NAME HOSTHEADERNAME,

    BY. END_DATE,

    AELINE. CODE_COMBINATION_ID,

    AEHEADER. EVENT_TYPE_CODE,

    NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID

    DLINK XLA_DISTRIBUTION_LINKS

    GL_IMPORT_REFERENCES GLIMPREF

    XLA_AE_LINES AELINE

    GL_JE_HEADERS JHEADER

    GL_JE_BATCHES JBATCH

    , GL_LEDGERS T

    , GL_PERIODS BY

    WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN

    ("AR_DISTRIBUTIONS_ALL"

    "RA_CUST_TRX_LINE_GL_DIST_ALL")

    AND DLINK. APPLICATION_ID = 222

    AND AELINE. APPLICATION_ID = 222

    AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE

    AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID

    AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID

    AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM

    AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID

    AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID

    AND JHEADER. LEDGER_ID = T.LEDGER_ID

    AND JHEADER. STATUS                         = 'P'

    AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME

    AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME

    AND JHEADER. CREATION_DATE > =.

    TO_DATE (JANUARY 1, 1970 00:00:00 ')

    "MM/DD/YYYY HH24:MI:SS")

    AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)

    [AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ("NO")]

    READER_1_1_1 > RR_4049 SQL query sent to the database: (Wed Sep 18 09:46:13 2013)

    WRITER_1_ * _1 > WRT_8005 writer run began.

    WRITER_1_ * _1 > WRT_8158

    START SUPPORT SESSION *.

    Startup load time: Fri Sep 18 09:46:13 2013

    Target table:

    W_GL_LINKAGE_INFORMATION_GS

    READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]

    READER_1_1_1 > RR_4035 SQL Error]

    ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier

    Database driver error...

    Function name: run

    Stmt SQL: SELECT DISTINCT

    DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

    DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

    AELINE. ACCOUNTING_CLASS_CODE,

    GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

    GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

    AELINE. AE_HEADER_ID AE_HEADER_ID,

    AELINE. AE_LINE_NUM AE_LINE_NUM,

    T.LEDGER_ID LEDGER_ID,

    T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

    JBATCH.NAME BATCH_NAME,

    JHEADER.NAME HOSTHEADERNAME,

    BY. END_DATE,

    AELINE. CODE_COMBINATION_ID,

    AEHEADER. EVENT_TYPE_CODE,

    NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID

    DLINK XLA_DISTRIBUTION_LINKS

    GL_IMPORT_REFERENCES GLIMPREF

    XLA_AE_LINES AELINE

    GL_JE_HEADERS JHEADER

    GL_JE_BATCHES JBATCH

    , GL_LEDGERS T

    , GL_PERIODS BY

    WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN

    ("AR_DISTRIBUTIONS_ALL"

    "RA_CUST_TRX_LINE_GL_DIST_ALL")

    AND DLINK. APPLICATION_ID = 222

    AND AELINE. APPLICATION_ID = 222

    AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE

    AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID

    AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID

    AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM

    AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID

    AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID

    AND JHEADER. LEDGER_ID = T.LEDGER_ID

    AND JHEADER. STATUS                         = 'P'

    AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME

    AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME

    AND JHEADER. CREATION_DATE > =.

    TO_DATE (JANUARY 1, 1970 00:00:00 ')

    "MM/DD/YYYY HH24:MI:SS")

    AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)

    AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')

    Fatal error Oracle

    Database driver error...

    Function name: run

    Stmt SQL: SELECT DISTINCT

    DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

    DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

    AELINE. ACCOUNTING_CLASS_CODE,

    GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

    GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

    AELINE. AE_HEADER_ID AE_HEADER_ID,

    AELINE. AE_LINE_NUM AE_LINE_NUM,

    T.LEDGER_ID LEDGER_ID,

    T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

    JBATCH.NAME BATCH_NAME,

    JHEADER.NAME HOSTHEADERNAME,

    BY. END_DATE,

    AELINE. CODE_COMBINATION_ID,

    AEHEADER. EVENT_TYPE_CODE,

    NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID

    DLINK XLA_DISTRIBUTION_LINKS

    GL_IMPORT_REFERENCES GLIMPREF

    XLA_AE_LINES AELINE

    GL_JE_HEADERS JHEADER

    GL_JE_BATCHES JBATCH

    , GL_LEDGERS T

    , GL_PERIODS BY

    WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN

    ("AR_DISTRIBUTIONS_ALL"

    "RA_CUST_TRX_LINE_GL_DIST_ALL")

    AND DLINK. APPLICATION_ID = 222

    AND AELINE. APPLICATION_ID = 222

    AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE

    AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID

    AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID

    AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM

    AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID

    AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID

    AND JHEADER. LEDGER_ID = T.LEDGER_ID

    AND JHEADER. STATUS                         = 'P'

    AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME

    AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME

    AND JHEADER. CREATION_DATE > =.

    TO_DATE (JANUARY 1, 1970 00:00:00 ')

    "MM/DD/YYYY HH24:MI:SS")

    AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)

    AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')

    [Error fatal Oracle].

    READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]

    READER_1_1_1 > BLKR_16004 ERROR: prepare failed.

    WRITER_1_ * _1 > WRT_8333 roll back all the targets due to the fatal error of session.

    WRITER_1_ * _1 > rollback WRT_8325 Final, executed for the target [W_GL_LINKAGE_INFORMATION_GS] at end of load

    WRITER_1_ * _1 > time full load WRT_8035: Sun Sep 18 09:46:13 2013

    SUMMARY OF THE LOAD

    ============

    WRT_8036 target: W_GL_LINKAGE_INFORMATION_GS (Instance name: [W_GL_LINKAGE_INFORMATION_GS])

    WRT_8044 responsible for this target data no.

    WRITER_1_ * _1 > WRT_8043 * END LOAD SESSION *.

    MANAGER > PETL_24031

    PERFORMANCE INFORMATION FOR TGT SUPPORT ORDER [1] GROUP, SIMULTANEOUS GAME [1] *.

    Thread [READER_1_1_1] created [stage play] point score [SQ_XLA_AE_LINES] is complete. Running time total was enough for significant statistics.

    [TRANSF_1_1_1] thread created for [the scene of transformation] partition has made to the point [SQ_XLA_AE_LINES]. Running time total was enough for significant statistics.

    Thread [WRITER_1_ * _1] created for [the scene of writing] partition has made to the point [W_GL_LINKAGE_INFORMATION_GS]. Running time total was enough for significant statistics.

    MANAGER > PETL_24005 from tasks after the session. : (My Sep 18 09:46:14 2013)

    MANAGER > task of PETL_24029 after the session completed successfully. : (My Sep 18 09:46:14 2013)

    MAPPING > TM_6018 the session completed with errors of processing row [0].

    MANAGER > parallel PETL_24002 engine Pipeline completed.

    DIRECTOR > Session PETL_24013 run duly filled with failure.

    DIRECTOR > TM_6022

    PLENARY OF THE LOAD

    ================================================

    DIRECTOR > TM_6252 Source load summary.

    DIRECTOR > Table CMN_1740: [SQ_XLA_AE_LINES] (name of the Instance: [SQ_XLA_AE_LINES])

    Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]

    DIRECTOR > TM_6253 Target Load summary.

    DIRECTOR > Table CMN_1740: [W_GL_LINKAGE_INFORMATION_GS] (name of the Instance: [W_GL_LINKAGE_INFORMATION_GS])

    Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]

    DIRECTOR > TM_6023

    ===================================================

    DIRECTOR > TM_6020 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] to [Sat Oct 18 09:46:14 2013].

    ------------------------------------------------------------------------------------------------------------------------------------------------------------------

    * I made a few requests in my source (Vision) database, table "XLA_EVENTS" exists, column "UPG_BATCH_ID" exists also

    * I added 'XLA_EVENTS' to the FROM clause and he ran in SQL Developer


    * in the SELECT clause, I see a column named 'AEHEADER. EVENT_TYPE_CODE ".

    but there is no table named 'AEHEADER' in the FROM clause

    so I added it manually, it is without doubt makes reference to 'XLA_AE_HEADERS '.

    The final request looks like this:

    SELECT DISTINCT

    DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

    DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

    AELINE. ACCOUNTING_CLASS_CODE,

    GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

    GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

    AELINE. AE_HEADER_ID AE_HEADER_ID,

    AELINE. AE_LINE_NUM AE_LINE_NUM,

    T.LEDGER_ID LEDGER_ID,

    T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

    JBATCH.NAME BATCH_NAME,

    JHEADER.NAME HOSTHEADERNAME,

    BY. END_DATE,

    AELINE. CODE_COMBINATION_ID,

    AEHEADER. EVENT_TYPE_CODE,

    NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID

    DLINK XLA_DISTRIBUTION_LINKS

    GL_IMPORT_REFERENCES GLIMPREF

    XLA_AE_LINES AELINE

    GL_JE_HEADERS JHEADER

    GL_JE_BATCHES JBATCH

    , GL_LEDGERS T

    , GL_PERIODS BY

    XLA_AE_HEADERS AEHEADER

    XLA_EVENTS

    WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN

    ("AR_DISTRIBUTIONS_ALL"

    "RA_CUST_TRX_LINE_GL_DIST_ALL")

    AND DLINK. APPLICATION_ID = 222

    AND AELINE. APPLICATION_ID = 222

    AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE

    AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID

    AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID

    AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM

    AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID

    AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID

    AND JHEADER. LEDGER_ID = T.LEDGER_ID

    AND JHEADER. STATUS                         = 'P'

    AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME

    AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME

    AND JHEADER. CREATION_DATE > =.

    TO_DATE (JANUARY 1, 1970 00:00:00 ')

    "MM/DD/YYYY HH24:MI:SS")

    AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)

    AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')

    * When I run this query, it takes a lot of run time without return no result (it took 4 hours to cancel it, I got the last time)

    my questions are:
    -What is the problem with this query?

    -How can I change the query in the workflow?

    could someone please help?

    Check if the session is reusable or non-reusable. If his re-usable, so you may need to modify the sql query in the window of the tasks

  • PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

    Hello

    I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

    I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

    I have disabled the firewall on the PC and MAC

    I tried over ethernet and direct connections

    When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

    When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

    He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

    After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

    Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

    I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

    LOGS *.

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

    2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

    2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

    2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

    2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

    2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

    Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

Maybe you are looking for

  • Website lettering is confused and sometimes unreadable until I do scroll or highlight, how to fix this?

    No matter what Web site I'm on, registration is not correct and sometimes words, doomed, entire pages are unreadable, until I high brightness or parade before the clutter and then again until I have to read. How can I get Web pages to appear readable

  • Re: Satellite A210 - logo LED exploded

    After installing XP, the LED of the 'satellite' logo never eases.How can I activate this LED?

  • How to programmatically change the z axis limits

    Could show you how to change axis limits (min and max) z programmatically in the attached VI?  It's a simple VI that uses the 3D curve.  Wouldn't be the same on x and thus value axes?  Would appreciate your ideas.  Thank you.

  • a continuous path of 1-d data

    Hello I will plot the data acquired from cRIO continuously over time. Please find the attached screenshot of the code and the RT vi Launcher. In order to draw I acquire the counties of ticks in micro seconds of FPGA and two analog inputs. With this c

  • My WordPad documents

    I was scammed; SED lady she worked for Microsoft and scanned my computer; Yes-very stupid! Microsoft clean up the mess. now when I open WordPad, MyDocuments comes in. when I cancel my documents and go back to open my files again, my documents back in