Converter Helper IP and VLAN

Similar Questions

• Help with the VLAN on SG200-18 and two switches SG200-08

  Hello world. My apologies, but I'm only average at best with my CISCO skills. I have simple installation running some network devices connected via 3 CISCO switches. It is small office and two bedrooms - one with the servers and the other with the printer and pc. Each room has 8 ports SG200-08 pass.

  Router / firewall is Sonicwall TZ215 and manages the internal routing between VIRTUAL networks. Each SG200-08 was directly connected to TZ215 (no SG200-18 again) and VLAN worked perfectly. Please see diagram below...

  Problems started when I added in the Center SG200-18 more to handle additional devices. Everything that I'm doing wrong, but I can't do VLAN longer works. Something I won't set up correctly in SG200-18.

  Please help me to Setup VLAN here - tag, unidentified, PVID, trunk... I am completely lost and already had to reset SG200-18 twice.

  My work without port switch 18 Setup was like that.

  SG200-08 (1)
  G1 1 trunk 1U, 100 t
  G2 1 trunk 1U
  G3 1 trunk 1U
  G4 1 trunk 1U
  G5 1 trunk 1U
  G6 1 trunk 1U SERVER3
  G7 trunk 100 100U SERVER1
  G8 trunk 100 100U Server2

  SG200-08 (2)
  G1 1 trunk 1U, 50 t, 200 t
  G2 1 trunk 1U
  G3 1 trunk 1U
  G4 1 trunk 1U PC1A
  G5 1 trunk 1U PC1B
  G6 trunk 50 50U PC2A
  Trunk PC2B 50 50U G7
  NETWORK PRINTER for the 200 trunk 200U G8

  Thank you in advance.

  VLAN.jpg

  

  Hello

  Oh I'm sorry. I understand that you have 3xSG200-08 and 2 of them with the same configuration :-). So no need to use this port for now.

  Kind regards

  Aleksandra

• Why most of my files suddenly converted to cascading and JScript Script Style files? Please, help if someone knows why!

  I installed translation software called SDL Trados 2011 SP2 with all its components, and that's when I noticed that a lot of my files (document libraries) have been converted into file formats of JScript Script and Cascading Style files. I had uninstalled the SDL and all its components, but the files in my documents are always messed up. Maybe, my installation of software has nothing to do with the format changed and something else made?

  Thank you in advance for your help!

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  After the description of the question, I understand that most of the files is converted to a JScript Script and files in Style files in cascade on the Windows 7 computer.

  I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

  I suggest you to refer to the help article and check if it helps.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• With the help of VLANS and VLAN Tagging is not working / no connection

  Hello

  I m trying to configure a VLAN between some virtual machines on ESX host 3.

  I want to do this way:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004074

  I got 1 dedicated NETWORK adapter to each ESX host that is connected to a dvSwitch in which I configured a portgroup

  with VLAN ID 2121. I have configured each virtual machine to use this network.

  When I put the virtual machines on a single host, they are able to communicate.

  When they are placed on different hosts they are (if the VIRTUAL LAN is enabled on portgroup) not able to communicate.

  So I m assuming it must be a problem in the config NIC on the ESX host or switch.

  I m using a HP2910AL on which I activated mode trunk for each port that is connected to a NETWORK card with

  the dvSwitch/Portgroup I try to use for the vlan. In the hp switch, I have a default VLAN with ID 1 where

  the Ports are marked not signposted. I install a second VLAN on the switch with ID 2121 in which I scored

  This tag ports.

  Is there something else to do - perhaps side ESX host?

  I tried changing the settings as "forged transmission-> allow ' on portgroup and I found other things

  in the web, but always without success.

  Kind regards

  Patrick

  Were you referred to this guide? :

  http://CDN.ProCurve.com/training/manuals/2910-ATG-Feb09-2-VLAN.PDF

  "show vlan ports" would be my next check to make sure that you have connected to your ESXi host 3 ports in the vlan 2121.

  As Duncan has said if you have a VLAN ID on the portgroup in the vSwitch and you have the port on the pSwitch as trunk not acess and VLAN ID is allowed on the trunk port pSwitch you should be ok.  Just to clarify the trunk is 802. 1 q No 802.3ad.

  The reverse is not VLAN ID on the portgroup vSwitch, use coelio on pSwitch with VLAN ID.  Limited pSwitch port to a VLAN, this may be ok for you?

• Subinterfaces and VLAN

  Hi all

  I was hired on with a State... Now its been awhile, but I do not remember how subinterfaces and VLAN all link together!

  Now correct me where I'm wrong (please), but them VLAN is created on the correct first switches?  When you create a VLAN on a switch you don't need ip or gateway address by default because them VLANS are the switch.  If you want intervlan routing you need a router.  Then, you configure a port trunking between the switch and router (ISL, 802. 1 q).  Now in the router, you can create a VLAN, and here you inter the ip subnet or the default gateway addresses correct?  This is where I get confused as to what reasons do you need subinterfaces?  How they roped VLAN and what would be the logical flow of data?

  Anyhelp would be appreciated!

  Yes you are right. If you are using the layer 2 switch and want to make the intervlan Routing then you need Layer 3 router device. But you must configure the interfaces sub with the default gateway to route traffic. Because there is a single trunk between swich and router so we need sup interfaces for multiple VLANs.

  Interface FastEthernet0/0.1

  Encapsulation dot1q 10 (10 represent 10 ID VLAN)

  10.1.1.1 IP address 255.255.255.0

  If you use a layer 3 switch, then you point all sub interfaces need so then you can create the interface vlan with the default gateway. You must enable ip Routing.

  Interface vlan 10

  10.1.1.1 IP address 255.255.255.0

  Hope this will help.

  Please rate if this can help.

  Thank you

• Create 2 VLAN (VLAN 1 and VLAN 2)

  Hi all

  I need help and advice with my new Cisco SF300-48. I want to create 2 vlan (vlan 1 and vlan 2). The switch is set at layer 2.

  example:

  VLAN 1 (port 1, 2, 3), vlan 2 (port 4, 5, 6)

  VLAN 1 can communicate with each other (port 1, 2, 3) and vlan 2 can communicate with each other (port 4, 5, 6)

  But vlan 1 cannot communicate with vlan 2.

  Any help would be appreciated

  Thank you

  Johan

  Well, as far as I understand the message communication between the VLAN is not necessary. The thing is, that all ports LAN VIRTUAL (for example VLAN 1 with ports 1, 2, and 3) cannot communicate with each other. Did you check the configuration of the port / VLAN (VLAN configured to each port configuration right / right about the tag-no identified)?

• Management and Vlan native in different subnet?

  Can I have a management ip and vlan native in a different on AIR-1242 switch subnet and 2960?

  Native on switch = 1.

  The interface vlan 100 = 10.10.1.25X 24

  BVI ip to the vlan 100 = 10.10.1.25X 24

  -HM-

  Hello

  As far as I know, the management and the native will be the same... I guess... You have Vlan native as 1 on the switch and Int Vlan 100 on routing switch? Am I wrong? Let me know what are your needs... which will help me to help out you!

  for your question...

  Normally, we specify him vlan native on the switch and the AP so that communication happens... communication won't happen if there is a match of...

  Looking forward to hear from you!

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• 1 convert to PDF and then restart the computer

  I used Adobe Acrobat Pro 11.0 Win since January 2014 with no problems until recently. Now I am able to convert a file to PDF, but the next time I try, I get the error message "Adobe PDF creation cannot continue because Acrobat is not activated."

  After that I restarted my computer, I am able to convert a single file, then have the same error message and reboot again.

  Can someone help me?

  I finally managed to do accept my serial number, and it seems to work ok now. If the answer seems to be to uninstall and reinstall the program.

  Thank you very much for your help yesterday and I'm happy to be up & running again!

• Since the installation of LR 2015 2.1 when I import from a card, that RAW files are OK by my JPEGs are blackened. The images are there because if I convert to black and white and then back to appear momentarily before color become blackened again

  Since the installation of LR 2015 2.1 when I import from a card, that RAW files are OK by my JPEGs are blackened. The images are there because if I convert to black and white and then back to appear momentarily before color become blackened again? Any ideas for help?

  Hi rsev,.

  For existing photos, select all your images in the grid view, and then click the Reset All button in the quick develop Panel. Then click on the auto tone button to correctly apply this feature.

  To prevent this from happening in the future, choose Lightroom > preferences > Presets (Mac OS) or edit > Preferences > Presets (Windows). Uncheck the apply auto tone adjustments.

  Reference: thumbnails appear black in Lightroom CC 2015.2/6.2

  It will be useful.

  Kind regards

  ~ Mohit

• Script to change the subnet and vlan.

  Hello

  Please can anyone help with a script to change the subnet and VLANs on all the esx host in a cluster for the vmotion and management network interface?

  Thank you

  Astra

  I guess it worked because you pasted an out front, so:

  Get-Cluster mycluster. Get-VMHost | Get-VMHostNetworkAdapter | where {$_.} PortGroupName - eq "VMotion"} | {} %
  Game-VMHostNetworkAdapter - VirtualNic $_ - IP $_. IP - subnet mask "255.255.254.0" - confirm: $false
  }

  I guess that makes still out:

  Get-Cluster mycluster. Get-VMHost | Get-VMHostNetworkAdapter | where {$_.} PortGroupName - eq "VMotion"}

  2 vmknis right?

  If Yes, then it should work I think.

• Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

  Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

  Hi sdr2014,

  I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

  So, let's try this:

  If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

  Please let us know how it goes.

  Best,

  Sara

• Existing vSwitch using and VLAN

  Hello

  I was wondering if it was possible to configure Lab Manager to use an existing vSwitch and VLANS configured in vCenter rather than create its own switch and VLAN?

  Thank you.

  Unfortunately not.  You will need to let LM create and manage their own groups of ports or switches.

  Note that:

  -When you bind a physical network to a vSwitch/vDS, LM creates a port group to represent the network (it also has an 'LM' tag in vCenter)

  -If you deploy a configuration "reserved", he made a vSwitch or vDS port group to represent the fence... and limit network traffic.  Again, when you look in vCenter, there should be an 'LM' tag to the object.

  Kind regards

  Jon Hemming, b.SC., RHCT, VMware vExpert 2009
  http://Twitter.com/vJonHemming

  If your question or problem has been resolved, please click the "right answer".  If someone helped him, please click "useful answer.

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• I can't uninstall Firefox. I tried my Add/Remove programs and have tried the intsruction given to manually run C:\Program Files\Mozilla Firefox\uninstall\helper.exe. and it won't work. Firefox is the only program that I am not able to uninstall u

  I am unable to uninstall Firefox. I have tried my add/remove programs and have tried the intsruction given to manually run C:\Program Files\Mozilla Firefox\uninstall\helper.exe. and it will not run. Firefox is the only program I am not able to uninstall using the normal methods
  

  This has happened

  Just once or twice

  today

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SIMBAR = {357DAD02-321A-4E1D-8305-C8CE3D8CA934}; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. Media Center PC 2.8; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729)

  I ' v tried running C:\Program Files\Mozilla Firefox\uninstall\helper.exe.
  It does not work.

• How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  Hello

  Choose indoor walk or run Indoor (it does not matter which) to an indoor walk-run routine.

  Even if Apple Watch does not currently offer as a workout interval training, choose one of these allows the most appropriate data sources (which are the same for market and short) to use to track your training.

  If walking or running, the accelerometer is used to estimate pace and the distance (allow your arms swinging naturally) as well as the frequency heart sensor for the estimation of calories burned.

  Run or walk inside will not affect your calibration data. Calibration is based on the GPS of the iPhone data and is only held during the outdoor walking training or race outdoors when the iPhone combined is taken along.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support