Cooler liquid secondary market SYS_FAN and CPU_FAN Question
Hello. I would like to replace my 3 + year, cooler Asetek stock in my R4 Aurora with a Corsair H75. From what I understand, two corsair fans caught in the rear slot of SYS_FAN Strip high close to the rear of the case and the cooler itself plugs in the CPU_FAN slot in the center of the Strip.
Can anyone verify if this is correct and I will avoid boot problems/errors?
FYI, I uninstalled Command Center and political use of cooling of Windows to manage my time. He really did a great job. My i7-3820 Sandy Bridge E OC is 'ed to 4.2 GHz between all four cores and my time difficult to reach the 70's low. I am simply by changing the stock cooler as a preventive maintenance measure.
I installed the Corsair H75 and 16 GB of G.Skill Ripjaws X series 1600 MHz. everything works perfectly. My times are a solid 20 cooler during benchmarks and games. Couldn't be happier!
Tags: Dell Products
Similar Questions
-
about a year and a half I picked up a HP Pavilion HPE h9-1170 computer, the model I got is cooled by liquid and recently I had shutdown problems (which I think may be due to overheating) I currently running with the box to open (and I can see fans for the radiator and others are running fine) but I was wondering if maybe there's an additional maintenance for the cooling plant) filling and such) that it takes, and if so, how would I go to do (never had a liquid-cooled machine before this one... so explain it to me like five im ) any help would be appreciated
Sparky, welcome to the forum.
Everything I've read, coolant is a closed circuit and requires no maintenance. However, I would clean the dust out of the system. This will substantially reduce heat.
Please click "Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.
-
I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you
You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.
-
I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?
Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.
You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.
-
Hi, I am unable to access my account of * address email is removed from the privacy *. I really need to return as soon as possible because I have a lot of important issues and contacts inside...
Thank you!View all Windows Live and Hotmail questions in the appropriate forum found here:
http://windowslivehelp.com/ -
Kindly unblock my account that I don't remember my email and Security Question.
Kindly unblock my account that I don't remember my email and Security Question.I received important emails in the account. He has been blocked it for a month now.
Kindly unblock as soon as POSSIBLE.
I'll be very grateful.
Thank you.
Hello
If you are referring to a Hotmail account, read this
I'm sorry, but we cannot help with hotmail problems in Microsoft answers Feedback Forum you send to
Please repost your question in hotmail in the hotmail link below forums
http://windowslivehelp.com/product.aspx?ProductID=1
ForumsConsult with Microsoft Certified Solutions -
I forgot my password and secret question
I firgot my password and my question secret, help me please
Hi TUNCAYTUNCAY,
· You are Ref Err by Windows password or password any program?
See the link below to learn more about Microsoft support for forgotten passwords.
-
WinXPsysytem: The upgrade and have questions
Have a dell e521 that I train and some questions. Have already updated to 3 GB of memory on x 86 operating system. Bios version active what 1.1.6 4/7/2007. Have checked Dells site and they offer a version of bios 1.1.11 released on 04/09/2007. Having checked their previous versions and mine is not yet in there. Don't know if I should go with the 1.1.11 version or stick with what is on mine, any suggestions? Also, I put in a 500 GB seagate HDD. Have a 80 GB drive there now which is pretty maxed out. Playing with the idea to put xp pro on the 80 GB and using the programs and storage 500 GB. I would like to know if it's a good idea or not! Could use pointers and how much others who have more experience I have of course on my best options for installation. for performance and features. Thank you in advance, Ron.
It's sad to say, you should probably have spent your money on a new computer rather than on the RAM and a new hard drive. Windows XP (you posted in a forum of Windows XP, that's what I assume you have) will be supported is no longer starting in April 2014. This means no more security updates and therefore increases the vulnerability to malware.
That said, your system now-updated can probably support Windows 7. You must run the Windows 7 Upgrade Advisor to check the remaining material.
As you say, Dell does not list the intervening versions of BIOS with 1.1.4, 1.1.10, so unless someone at Dell or in the Dell forums can tell you what "improvements" in your version or with your version 1.1.10, you have no way of determining that. Based on omissions, I think there were only minor changes in these versions.
Normally, I would leave the BIOS alone. Note, however, that Dell "recommends" 1.1.10 be installed because
The update contains improvements or changes that will keep your system current and compatible with other system modules (firmware, BIOS, drivers and software) software.
If you want to stick with XP, I would leave the BIOS alone. If you want to install Windows 7 (assuming that there are Windows 7 drivers for all your hardware), I would Setup 1.1.11. Be sure to read and follow instructions carefully. -
Feel free to change the title
How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?
You're talking about Facebook?
Try the gyration of the Secure Browsing
-
How do you get access to your computer when you forgot your password and hint question
My mother did not use his computer for a while and forgot his password and hint question. Is there anyway to get into the computer without them? She has a Toshiba laptop with Windows Vista installed on it. Thank you.
Hello
I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords
read the policy at the link below
I suggest you reinstall vista
-
What are the causes of "secondary drive 0 and 1 not found.
my pc says "secondary drive 0 and 1 not found. What could be the cause.
Hello
Method 1:
You can check the primary and secondary transmission in disk management and check if they are healthy.
(a) open computer management by clicking the Start button, click Control Panel, clicking system and security, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(b) in the left pane, under storage, click disk management.
(c) in respect of each hard drive, check the status.
Method 2:
Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.
Step 1:
You can check in the BIOS Basic Input Output System () if the drive is detected correctly.
Note: Perform the step after you restart the computer.
Step 2:
If the drive is detected correctly during the restart in the BIOS, update the chipset and BIOS drivers. Visit the manufacturer's Web site to do the same.
-
Drag and drop question - Desktop and USB
Hello!!
I have an Asus laptop that I bought in September with Windows 8 is installed. I saw drag and drop questions on desktop lately, and I'll provide you with a full run down of what past:
1. this particular case, I wanted to save my mobile by copying and pasting all the files from my phone to a USB (USB Kingston).
2. I selected all files, right click to copy, open the folder that I made in the USB for my phone content and do a right-click Paste.
3. nothing's happened, Explorer seems to have frozen, so I opened the Task Manager and press end task, all closed and restarted my laptop.
4. I have excluded that my phone was the issue. I was able to create a folder on my desktop and copy and paste all of the content of my phone in the folder on my desktop.
5. I tried to copy and paste / drag and drop an image from my office to the flash drive. Explorer Windows freezes on the rise again.
6. I tried another flash drive. Explorer Windows froze again.
Apparently I'm unable to copy files ON a USB key, which makes the backup and backup of things a headache because Windows Explorer stops working every time.
I am the only user of this laptop, and I don't know what is happening or what to do. Any help would be appreciated. Windows 8.1 upgrade would solve this problem?
Hi Karthik,
1. There is no error message.
2. I tried earlier drag - move my documents to my flash drive and it works perfectly.
I just tried again to drag and drop from my office to my flash drive and for some reason, it works again.
I don't think that was with my flash drives, but with Windows Explorer itself. Nevertheless, it seems to have fixed itself somehow. Thank you very much for your help!
-
? I can't open my apps in creative cloud; whenever I get trial versions and the question to purchase. But I am a member for several years now. We have already removed all apps and installed them, but it does not work. What should do?
-
I have Lightroom 6 stand alone software and my question is should I update to Lightroom with updates to Lightroom CC?
Hi jamesb,
You can make the autonomous of the Lightroom updates.
Go to help > check for updates or check out this link: http://blogs.adobe.com/lightroomjournal/2013/06/keeping-lightroom-up-to-date.html#lrcc2015
-
Adobe Presenter 10 Drag and Drop questions - grey area only when you try to create
Hello
I try to create drag and drop questions in presenter 10 and after clicking on Add Question-> drag-and - drop, the new window opens but where I should be able to define the questions etc., the screen is just gray. Have the same problem on the three other systems as well.
Flash is updated to the latest version as well as presenter 10.
Oddly the Flash version installed is 15, but a right click in the grey box shows me version 11.
Any ideas?
Thank you
Chris
Just in case someone else has the same problem, a cat with Adobe brought the solution:
On the gray screen, right click and go to global settings
Go to the Advanced tab
Scroll down and click on "trusted location settings.
In the window 'Trusted location settings', click on 'Add' at the bottom
Click on "Add a folder" and select "Local disk c".
Click "Ok" and confirm on the "Trusted location settings" window
Worked for me (on three different machines) like a charm!
Maybe you are looking for
-
laptop HP dv7t-4100 Ww185av: laptop won't turn on
My laptop was working fine until recently. Two days ago, I was in a hotel room, wor king on my laptop and everything was fine. Then I plugged it later and tride to make it back on and got no response. Is the only thing that happens, whenever I press
-
Not all of the memory installed in Equium A60 appears
I'm unraveling an A60, A60-156 532 P4 / XP HE/256 MB / 40 GB/15TFT/DVD SuperMultiPSA67E - 00400C 85 The problem is that Windows XP and BIOS do not show that there is the 256 MB of RAM installed.BIOS shows: 196608KBWindows shows: 192 MB I just updated
-
ADC inforation with UART for Labview
Hello I'm tryin to send a voltage of environ.2 v of CDA on my MCP3903 Board with microchip dspic33f. I am able to communicate with labview by UART, but not able to get the sine wave I hope. I'm not sure how the data are plotted as if just garabage or
-
Using PC printer 4 x 6 borderless Cup always part of the original photo printing
I print 4 x 6 photos without edge of PC to the printer in maximum resolution. The overview screen always a little cutting edge when in mode without borders, but none when previewing with border. Is there a way to work around this problem, or straigh
-
Error no connections, trying to play Castleville
Original cant title: why I get my games I played yesterday todayb keeps saying no link When I play castleville etc I get pg but the rest of the photo is not thrue, sometimes I can send gifts to others I can not any suggestion pls