cooling plant Y50

Similar Questions

• Maintenance of cooling liquid

  about a year and a half I picked up a HP Pavilion HPE h9-1170 computer, the model I got is cooled by liquid and recently I had shutdown problems (which I think may be due to overheating) I currently running with the box to open (and I can see fans for the radiator and others are running fine) but I was wondering if maybe there's an additional maintenance for the cooling plant) filling and such) that it takes, and if so, how would I go to do (never had a liquid-cooled machine before this one... so explain it to me like five im ) any help would be appreciated

  Sparky, welcome to the forum.

  Everything I've read, coolant is a closed circuit and requires no maintenance.  However, I would clean the dust out of the system.  This will substantially reduce heat.

  Please click "Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• Misfortunes of cooling water Alienware R4

  So for about 3-4 months, I noticed my die thermal processor reach 90 + degrees all in now under TJMax is about 100 to no question. About five days ago, but it reached 100 degrees on number of 4 core which in turn emitted warnings as FPS in games at 15 frames per second due to the CPU wouldn't be able to follow and closed moment offs are grateful for the cpu so I don't burn out.

  Then I studied the cooler (Closed Loop does not mean that you can not open it) and found the dough next thermal was non-existent. In loops and locking in the radiator which had to be cleaned. Empty all the liquid cooling plant and put in the water (freshly) distilled and cleaned with Iso alcohol. Thermal put stick on again and finished. I put it back on, screwed everything in. For about 30 seconds, temp where 60 degrees. Then when I opened the steam and launched CS GO to a load almost test. The temperature soared to 90/90/100/100 and windows became lethargic and off automatically.

  I read people open their cooler without problem, and with other materials of people, in my view, it is possible to do and put it back, so

  What I've done wrong?

  

  Here's a good overview of the Aurora R4 / Asetek Premium cooler, dp/n 01YGW. It is an upgrade for all other coolers of short alienware the new Area-51. It's a 38mm wide vs radiator our old coolers that are 25 mm wide, it holds more coolant = superior cooling, as well as of several metals, area to act as an additional heater. It has a copper vs base Aurora-based standard aluminum, where copper is a higher thermal material in aluminium. The pump can run faster because, well I think I've read. It is a direct replacement for the standard R4 cooler, so the bolt holes should be the same. That must be true for R1, R2, R3 since this cooler takes the same 120mm fan, & the cooler accepts a fan 120mm on each side of himself, so the bolt holes should not be a problem & must be of type "universal" 120mm. It turns out to be 1/8 inch (3mm) tall, so it needs 1/16th of an inch more room up-down when focused in its place of installation.

  Asetek converts this cooler. Dell would make $205 for a new, but yes, STS-parts for about $ 50, w/photos of what your could resemble the delivery. Reference Dell & m are both in Round Rock, Texas--> STS gets "next to" parts of Dell, as these coolers. They come w / a R4 2011 socket retention ring. However, I was able to reuse my x 58 socket 1366 (Area 51 R1 R1 & Aurora only) ring of retention on mine. R1 R2 R3 owners will reuse their retention of stock rings, but when in doubt, Asetek sells rings of retention of Intel that fits 01YGW, here's their eBay store:

  • http://www.eBay.com/Sch/asetekparts/m.HTML?item=281611098695&hash=item4191545a47&PT=LH_DefaultDomain_0&RT=NC&_trksid=p2047675.l2562

  @Tesla

  I'm glad that STS you picked a winner. As you say, he sent you a socket ring 2011; for your R1, re - simply use your ring in 1366. Below, all my furrows line up between premium & my ring 1366:

  

  Yes he has the same 7-pin plug up in the band of light for power-field-rpm & CmndCntr can see it.

  They you also supplied a standard stock fan, which is 38 mm wide. On your original cooler, which is 25 mm wide & you have a fan of 38mm, total about 63 mm or approximately 2.5 "rad-fan intruded in your case, your 'space '. The new premium cooler will be 38 mm wide + fan 38 mm = 76 mm or 3 ", so the new part is going to encroach on your system only on another 1/2". To return to the same footprint in your case, simply remove the 38mm fan, they gave you & try a 25mm pwm fan, to return to a footprint 63 mm/2.5 "in your case.

  This premium cooler is the same width as the h80i, in order to push - pull, try a pair of pwm 120 mm x 25 mm fan w/a fan derivation of course, where you then an imprint of 88 mm / 3.5 "in the case."

  By your question, this cooler R4 will work in your R1; Asetek has done what they call low profile coolers. We know they make coolers for about 3-4 other companies & appropriating the brand too. Their retention rings works on all their low-profile including our AlienCoolers coolers. Your low-profile 1366 retention ring meant for your original R1 slim line cooler is compatible w / the new R4 bonus 'low - profile' cooler. Type in some time & make the announcement.

  I'm the 1st guy I know to put one in R1 Area-51, where I simply traded a 5pin top instead of the 7 pins. I prefer to continue to use AlienCoolers on say a type of Corsair, & I would rather buy a used STS premium & really buy a pair of them, take one as a spare, knowing it'll plug right in, no fuss no muss, stay original, keep the alien icon & corresponds to a h80i cooling performance. $ 205, double what it's worth, Dell price does us all off, but fortunately STS not.

  

  01YGW is bigger than my A-51 w550r about 1/8 in. (3mm) cooler or 1/16th of an inch at each end

• How to clean disk defregmnet

  I tried to scan my laptop on essential security, but up to 4 steps happening.

  But he doesn't answer is no for a long time for defregment disk .will u please let me know how defregment all disks,
  as indicated on the scanner. ?
  or guide me if IS IT NECESSARY?
  I HAVE AN OVERHEATING PROBLEM. COOLING PLANT CAN SOLVE THIS PROBLEM OR OTHER ALTERNATIVES?
  I'M retired & can NOT SPEND ANY SUM SO PLEASE ADVISE ME if IT IS FREE OF COST.
  Thank you.

  MSE won't defragnment for your PC.

  If you want to defragnment follow the steps on:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  He explained on defragnment and other measures to improve the speed of your system.

• Help - Inspiron 1525 stops randomly

  I have a Dell Inspiron 1525 that I bought new in August. He started cutting at random times very sporadically about two months after that. There is no blue screen, no warning, no reboot - shuts right down. I contacted Dell support last week, after he began to close several times a day. Tech support had me disable the option that stops the machine when there is an error. It seemed to help for a few days and now it's back to turn off without apparent reason. If anyone has had this problem and how solve you this problem? It is so annoying!

  OK guys, I got you exactly the same problem, its nothing to do with the hard drive, it seems to be the cpu and memory are too the hot.i ran a program on my system called regcure, I've erased everything that has been using a lot of memory and guess what? its cured.defo purchase cooling plant for him sitting on tho.i also replaced my memory because they were hot I couldn't touch 'em without serious burns

• For lenovo y50 cooling pad

  Hi, can someone suggest me a good block of cooling for lenovo y50

  Y50 fans look like they are in the same way they are in most laptops. They suck in air from the bottom and exhaust is placed on the sides or the back. In most cases on the rise, the desktop is sufficient to lower the temperatures of a few degrees. I myself did not use the fan in my block of cooling for centuries. It is more comfortable to use when he raised and tilted, and also the air flow is improved. And then I game not on my laptop for games more. When I got to the big finish cpu in my laptop (that the footer) and overclocked my GPU and memory, I removed the bottom cover of my Y580 and the fan on. The temperatures where there is a little lower, but I made it mainly to keep my HDD cooler because it gets really hot in this laptop under load.

• normal temperature y50-70 of Lenovo problem

  Jin

  I tried dying light on my y50-70

  with the air conditioner off the coast:

  GPU: 86-88 degrees

  CPU:89 - 90 degrees

  with the air conditioner on:

  GPU: 77 to 81 degrees

  CPU: 80-83 degrees

  Is this normal temp? and if not what is the normal temperature of this computer laptop while in game?

  Thank you

  In short - I do not recommend playing at this high temperature.

  Long answer - it will not send Sparks, but the components will lose effectiveness and can be damaged over a period of time. How long? Maybe 6 months, 1 year, 2 years - it all depends on how much you play.

  Heat is an enemy of computers. The cooler you can run them, the better.

  My current time, because all settings/changes, do not exceed 80 all in game. GPU - max 78, CPU - max 81

• [Power Mac G5] Type of liquid cooling system?

  Y at - it anyway how to determine type of LCS just by looking at the case?

  We have old school Power Mac G5 DP 2, 7GHz (early 2005) we use for editing (well, for the last two years, he's right there and no one wants to touch this old piece of...). They will throw him in the year, and since I was take care of him for a while, I thought I'd take home when they do and use it as a backup machine for the data of my and my wife. I would like the max memory, put a few large hard drives (and small SSD, but there seems to be a lot of problems with this) and run the Linux command (more problems).

  But first, I have to clean the machine and look at the State of it. What particularly concerns me is the LCS (DP 2, 7GHz I) - these things have been prone to leaks and what I found there are at least three revisions of the LCS - second of them made by Panasonic seems to be the most reliable. I can't look inside, deeply, because it must be ready to use at least for another 3-4 months, I can do is to open the case and remove the front fan and look outside the heater.

  So this brings me to my question: Y at - it anyway to determine the type of LCS just by looking at the case?

  Thank you...

  Apparently, there were two models more prone to leaks than others, although still very rare. See this http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-liquid-cooling-infos-fuites-issues.html

  The damage inflicted by a system of flight are very serious, and it is almost impossible to hide or completely clean. As soon as you open the side panel on the Power Mac, you will easily be able to tell if this unit experianced a problem.

• The Iphone needs to cool down before using the flash

  Hello

  I see the message on my Iphone 5 s(IOS10-Updadte) camera-"The Iphone needs to cool down before using the flash"

  Please help me solve the problem.

  Hi sangani53,

  Thank you for using communities Support from Apple!

  This message indicating that your iPhone must cool before using the flash indicates that the temperature of your iPhone is passed to where certain features will be disabled.  Once you bring the temperature down, the features should come back.  Take a look at this link for more information on updating your iPhone in the operating temperature.

  Keep the iPhone, iPad and iPod touch in acceptable operating temperatures

  Take care.

• Cool/yellow tint on iPhone 7 screen

  Everyone has noticed that 7 iPhone screen is actually not as bright as the iPhone 6? What is a defective unit? I thought it was supposed to be 25% more luminous. She seems to have a cooler for her yellow tint when it is next. White is certainly not as bright compared to the 6 s. I turned off brightness auto and them two on high.  Some forums suggested to do a reset of all parameters and that did not help. I am very disappointed of the brightness.

  Hello charef,.

  Thanks for this info and choosing the communities Support from Apple. I know how important by ensuring that your display on your new iPhone 7 works correctly is for you! From what you said, it seems that have enabled, the feature of night shift so I would check on two devices first.

  Adjust the brightness of the screen and the color balance - iPhone user Guide

  Otherwise, if you think that it is a discoloration of the display, I would follow the steps outlined in this article:

  Get help with the screen on your iPhone, iPad or iPod touch

  See you soon!

• Hello! I had the 10 iOS in iPhone is and it's cool! Di you know if I should get in iPhone 5, or it will get stuck? Thank you

  Hello! I had the 10 iOS in iPhone is and it's cool! Di you know if I should get in iPhone 5, or it will get stuck? Thank you

  Since iOS 10 is compatible with the iPhone 5, if you have not limited the space remaining on your device, I would recommend installation. Please note that this update is bricking many iPhones, so make sure you have a full backup of your data before you start the installation.

  Good luck.

• 2015 iMac 5K - investigation of cooling fan

  Hey guys,.

  I just got the iMac end of 2015 5K with i7 Quad-core (skylake), 4.0 GB AMD R9 M395X, 32 GB of RAM, 2 TB Fusion Drive. The cooling fan is very quiet and it's quieter in the way, but when I've rendered from Adobe After Effects or Adobe Premiere fan starts booting (and then turns off once done rendering).

  So, I wondered, - is this normal? It overheats? Contact Apple Support? This hurt the longevity of the iMac?

  Thanks for all your contributions!

  Yes this is normal. The management control of the system is the detection of additional heat to the rendering process load and lifting the fan to avoid overheating.

• can you collect cool previews as an add-on anytime soon?

  I used add on previews cool cooliris for many years and find it off this morning. Is there anyway I can get that add on back?

  This should help you, at least as much as this old extension is not signed. But this isn't a permanent solution. It will not work in the next version of Firefox 44. Cool Previews was abandoned by the crew Cool Iris - so it is dead.

  https://support.Mozilla.org/en-us/KB/add-on-signing-in-Firefox#w_what-can-i-do-if-Firefox-disables-an-installed-unsigned-add-on

  Replace the module signature (advanced users):
  You can override this setting by changing the preference xpinstall.signatures.required to false in the Editor of Configuration of Firefox (topic: config typed in the URL bar). Support is not available for all changes made to the Configuration then editor please do so at your own risk.

  Note: This pref will be gone in Firefox 44 (expected release for 26 Jan 2016) for extensions currently unsigned user should contact the developers of these extensions and their prod in get their act together & get their extensions signed by Mozilla. Otherwise the users of these extensions will be GROUND come out of Firefox 44. Mozilla has already made back the version in which this new security feature should be activated from Firefox 40 to 44. I doubt if there will be a further reprieve.

• Recommended installation for the stability of the regions hot & warm even under Safari until Mac, cooling system is innovated. For a more Durable Mac

  Hello. It is best to combine a stable software (10.11.6 is stable to this day) and a cool hardware, even with Safari (with many tabs). A stable software is not enough, a cooled optimal equipment is also essential; It creates a stable holistic system.

  Until Apple, miniaturize perhaps, a sort of refrigeration in the circuits themselves (coolant will be not compact) due to the warming of the planet (some countries reaching a strong history of 46 to 65 degrees Celsius), cooling fan is not viable because it is so hot that he uses room air, regardless of how fast the fans spin (which would be just like a set of dry hair to the maximum) is not enough. An already hot air will get even hotter once Macs is used for long hours that could damage the GPU in particular, or perhaps even deform boards disconnect some circuits even or deform inside fleas which includes also circuits in them. Heat can also soften the welds in the Mac.

  It is recommended to run fans manually with a fan control application, even if the Mac is new (over the past six years the iMac I have had 2 replacements of GPU - this is most probably because of the heat and lack of ventilation in the Macs.) Apple may have more emphasis on function and either looks-it can't be 50-50. Replacement could cost if not for Apple Care which is good to have), if you are in an area that is warm or hot, at least 2000 rpm which seems to be a good balance between cooling and too much noise (it keeps the GPU minus 70 Celsius, especially). At 2000 rpm, the wear on the fans is not the only striking, it's usually only 47% of the maximum rpm of Apple fans (good fans are usually evaluated during maximum 5 years running 24/7 all year). But the best is to turn off all the gadgets to make noise to make the quiet place and adjust the fans (with a minimum of 2000 RPM) as quickly as possible without being noisy for the user. It is better to add extra cooling in the back (like a small electric fan or fans of cooling for laptops) for maximum stability if you're not in a cold air-conditioned room.

  It is good to reset PRAM then MSC after the fans and password recovery to use disk utility (two types of repair) manually before booting into your main operating system.

  God bless you. Revelation 21:4

  Directly from the plug of the iMac:

  Operating temperature: 50 ° to 95 ° F (10 ° to 35 ° C)

  If you try to work beyond these limits, good luck!

  There's this thing called 'air conditioners' cool the environment.

• Is my Apple iPad WiFi Mini unlocked the cell plant (Verizon)?

  Is my Apple iPad WiFi Mini unlocked the cell plant (Verizon)? It was purchased at Apple December 2013. He is a certified refurbished by Apple

  Yes.