Copied data location, such as when I press 'Prt Scrn' on my keyboard

Similar Questions

• When I press any key on my keyboard, my mouse click but the pointer move.

  My computer is a Gateway NV53 with Windows 7.  My mouse pad is a Synaptics TouchPad V7.2.  Whenever I press any of the buttons on my keyboard, if I play a game or not, it "replaces" the ability to move the pointer.  I find nothing in any of the menus "Control Panel > mouse properties > device settings > settings...". ' who have yet set.  That maybe somebody has some ideas about how to "disable" the "substitution"?

  Found this on techsupportforum.com and this worked for me...

  "Posted by kaufmann91 .

  Great success!

  One of my friends understood the problem.
  Go to control panel and the properties of the mouse, click on the device settings tab and select "Synaptics TouchPad". Click settings, and it should bring up another window.

  In the list select Pointing > sensitivity > PalmCheck and by default, the bar is more to the right, between Minimum and Maximum, slide the bar completely to a Minimum and the problem should be solved! You can now move the pointer when you type. : D »

• When you press the keys on my keyboard I get numbers instead of letters.

  NEEN HELP WITHOUT KEY

  screwed up keyboards I press the u key and the number 4 comes out, right now I'm using the KEYBOARD of SCREEN on that used ON ACER I got 15/02/12. CAN SOMEONE HELP ME?            P.S. THANKS JAY-MAT.

  Hello Gerome

  You have activated the NumLock feature on your system. From what I found on Acer and by turning off NumLock, you need to hold the function key 'Fn' correspondent and press the "F11". This should disable NumLock and the keys to normal. If this is not the case, look at your keyboard until you find a key with a symbol that has a number and a lock. Press and hold the function key and press the key.

• How can I save the Capture screen image to a file automatically when I press the screen Capture button?

  I want to know how can I do so when I press the button on my keyboard, to do a screen Capture, it automatically saves it in a file?

  I want to know how can I do so when I press the button on my keyboard, to do a screen Capture, it automatically saves it in a file?

  ==================================
  The free Gadwin Printscreen version could be
  what you are looking for:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Gadwin PrintScreen download screen
  http://www.Gadwin.com/download/
  (scroll down to: Gadwin PrintScreen 4.3 freeware)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to save the data to the new file, when you press the button

  Hello.

  Run a program that reads data recorders seconds and displays a trace on the screen.

  What I want, is that when I press a button, the program will ask for a file name and begins to record data to the file, and continues to do this as long as the button is pressed.

  When I press the button again, the program asks the name of the file again, so I can select a new file to write.

  I've included a simplified version of my program that works by asking the file name at the beginning.

  How can I change the program it starts a new file every time that the key again.

  Kai,

  I changed the example that I gave you to LV8.0, but I have never used the option 'Save for the previous version' before, so I don't know if it will work.

  I have combined the start and stop of recording in a single button (just change the text to all what you need) and I used the 'value' property to pass the path between cases. The path can be formatted as you have in your version, don't forget to use the string conversion function filepath.

  Just in case where it doesn't work on your version of LV I've attached a screenshot of the block diagram.

  Hope this helps, let me know if you have more problems with this.

  Easy.

  Darren.

• When I press OK on my 4280 printer to copy the alignment page, it shows "paper"? Nothing prints.

  All-in-one printer, HP Photosmart 4200

  Windows Vista 32-bit

  When I press OK on my 4280 printer to copy the alignment page, it shows "paper"? Nothing prints.

  Thank you very much for your answer. As suggested, I tried the hard reset nothing helps. Since then, my printer has me faithfully helped the last 4 years, I thought that it is preferable to ask for rest & buy another HP printer. I am proud to say, I am very pleased. Thanks Shane.

• Mouse Sonar: Registry key? Specify the location of the pointer when I press the CTRL key

  Windows 7 Home Premium 64-bit
  (But this feature existed for several years, at least as old as XP).

  In Control Panel mouse pointer Options tab, there is a checkbox option:

  [b] "see the location of the pointer when I press the CTRL key". [/ b]

  When this field is selected, pressing the CTRL key causes concentric circles around the mouse pointer, to help you find it quickly. HE often called mouse Sonar.

  I want to activate this option, but my mouse control panel does not have a pointer Options tab. I installed a mouse of third-party providers of hardware, software and drivers, and they hid the pointer Options tab. If I knew that the registry key for this option, I can activate it via regedit.

  Someone knows the active registry key or disables this option?

  This option is stored under this registry key:

  HKCU\Control Panel\Desktop\UserPreferencesMask
  However, it is coded to store several variables, and this direct modification is very far from a supported scenario.  You can try to install the Microsoft IntelliPoint software instead.

• A date today can be added in a date field when you press the submit button?

  I created a form with a "submit" button and the form is sent by e-mail.  Then the date when the form is submitted to appear in a date with the key field is pressed?

  
  Any help with this is appreciated. Thank you.

  Hello

  There is a preSubmit event to form objects that you can use.

  Select your date field, open the script editor and add this script (language is FormCalc) in the preSubmit event.

  $ num2date = (date (), ' MM/DD/YYYY')

• IPhoto crashes when you press the info button

  Since very recently, IPhoto crashes every time when I press the info button to enter people information a photo. I have version 9.4.3. running on OSX version 10.8.5. I added the first lines of pages and the pages or error report, if that can help anyone. I tried to repair the basis data, but without success. I am very grateful for any advice on this issue.

  Process: iPhoto [552]

  Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto

  ID: com.apple.iPhoto

  Version: 9.4.3 (9.4.3)

  Generation information: iPhotoProject-720091000000000 ~ 1

  App item ID: 408981381

  The external application ID: 15017489

  Code type: X 86 (native)

  Parent process: launchd [139]

  User ID: 501

  Date/time: 19:50:47.475 2016-01-04 + 0100

  OS version: Mac OS X 10.8.5 (12F2560)

  Report Version: 10

  Interval since last report: 34492 sec

  Crashes since last report: 3

  Per-App interval since last report: 905 sec

  Per-App crashes since last report: 3

  Anonymous UUID: 23235B01-625D-2A47-6A8F-352C3092B10A

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x00000000c53b6a10

  If you use iPhoto 9.4.5 or an earlier version, iPhoto will crash whenever you try to use maps. It is no longer supported.

  See:

  The first versions of iPhoto 11 started to plant for many users suddenly last month.

  There is a problem with the functionality of the site, because Google maps will no longer be supported.

  See the solution of Huxly647:

  Huxly647 , November 20, 2015 12:05 AM
  Re: iPhoto crashes after opening several times in reply to carvermon Useful

  I found a solution that works for me...

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  Let me know if it works for you guys...

  Deletes two files "googlemap.html" and the googlesearch.html of iPhoto application bundle prevents the JavaScript running inside and causing the accident.  Log of course do the same thing. So it's pretty clear that something happened at the end of Google.

  To access the files inside the iPhoto application select it in the Finder and ctrl-click on it. Then use the command "Show Package Contents" from the menu.  Open the content subfolder and then resources.

  Do not try this fix without making a copy of the iPhoto application before trying to delete the two files of the entire application.

• restart of the computer from standby when I press start on the system unit, but not when a scheduled task is started

  Windows XP Professional SP3, updates, motherboard Asus P4P800 series (2006). The original system dates back to 2002, but there have been many additions and replacement upgrade. More recently, 2011, two old hard drives have been replaced (XP had destroyed itself requiring a reinstallation), with a much larger and HD, and the cpu has been replaced by a 3 GHz one.

  I've configured the BIOS to enable the use of standby mode (standby). I wanted to be able to run scheduled backup jobs early in the morning, a little before I wake up normally. The goal was to conserve energy. Whenever I leave the computer for more than an hour or two, I put it in sleep mode. In recent years, that it worked well.

  Scheduled tasks are still, in fact, more surely than ever. But now, when I press the Start button on the system unit, the operating system is restarted rather than restore the State of the system at the time of Eve. This happened almost constantly for maybe a week. I was always a guard never enter sleep mode when I'm aware of any application running who has not completed a requested operation (save a file, defragment a disk, etc.).

  I searched on the basis of knowledge, but not found any problems like that. There has been no hardware changes, no new devices; only change of important software (but it is difficult to see how it might be relevant) was the resettlement of Java Runtime Environment 6.x to support the help of OpenOffice. Although I have not checked, I am reasonably sure that all drivers are up-to-date.

  No idea why this should suddenly become a problem or how to fix?

  Hello

  I suggest you follow these methods and check.

  Method 1: View the steps suggested in the following link.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Method 2: Use the Powercfg.exe utility to restore the default power mode

  You can use the Powercfg.exe utility to copy the power mode of the user by default to the currently logged user profile. You can do this because eating patterns are only related to individual user accounts. To copy the default user schema using the Powercfg.exe utility, follow these steps:

  1. click on Start, click run, type cmdand then click OK.

  2. at the command prompt, type the following command and press ENTER:
  powercfg /RestoreDefaultPolicies

  Method 3: How to perform the check and clean boot if the problem persists.

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

  I hope this helps!

• My emails are quadruplicating themselves. When I remove them, they disappear, but when I press send/receive back

  I use Outlook express for e-mail. Someone had a problem with the duplication of emails or their refusal to stay deleted?

  The other post:

  My emails are quadruplicating themselves. When I remove them, they disappear, but return when I press send/receive. I tried to mark them as read, and then delete them, but have had no success. What is the answer, please?

  Poster PA bear MS MVP on another post:

  Assuming that Outlook Express (which has nothing to do with Internet Explorer):

  1. move all the messages that you want to keep out of sent items anddeleted items folders and in other local OE folders have created you for archiving (backup) of such messages.

  1B. move 99% of your messages in your Inbox folder to other folders the of OE, too.

  2. Note the location of the store of your identity (http://www.insideoe.com/files/store.htm#storemain).

  2B. turn on "Show hidden folders and files" via start | Control Panel | Folder options | View (cf.http://www.bleepingcomputer.com/tutorials/tutorial62.html).

  3.-online close Outlook Express! <>

  4. in Windows Explorer [Windows key + E], access your storage folder, find & removeOutbox.dbx, Sent Items.dbxand Deleted Items.dbxfile.

  To avoid such problems in the future, comply with the following restrictions:

  N ' not use Inbox or sent items to archive messages. Move them to local folders created for this purpose.

  -Empty the deleted items folder daily.

  -Frequently perform a manual compact of all OE while records that "work offline". More onhttp://www.insideoe.com/files/maintain.htm

  -Do not cancel automatic compacting, where it would happen and do not try to close OE via Manager tasks or stop your Automatic compaction machine can take place.

  -Disable e-mail scanning in your antivirus application. It can cause this corruption (as well as loss of messages) and offers noadditional protection:

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  ================================================================

• "Storage insufficient to create the shadow copy storage file or other shadow copy data"(0x8004231F). "

  I have Windows Vista Home Premium (32 bit) and you cannot create a system restore point.  Despite all attempts, I keep getting the error message "storage insufficient to create the shadow copy storage file or other shadow copy data"(0x8004231F). "  There is a large hard drive space (90 GB free with)< 70="" gb="" used). ="" how="" can="" this="" be="">

  Hi rebick,.

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  • When was the last time it worked?
  • Remember to make changes to the computer recently?

  First of all, I would say that you unplug any external drive connected to the computer except the keyboard and mouse.

  This error message can occur if there is some system files corrupted on your computer. Suggest to run a SFC scan, which would be a search for system files corrupted on the computer and replace them.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11 after the scan finished, close the command prompt window reboot the computer and check.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista.

  For more information please visit the link below.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  If the step above does not resolve the issue, I would say that you create a new user on the computer account.

  Log on to the new user account and check if you can create a system restore point.

  1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click on create a new account.
  4. Type the name you want to assign to the user account, click an account type, and then click on create an account.

   http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I press on DELETE opens the program of support for hp and shift caps lock is enabled...

  When I press DELETE button help HP and support the program opens and the caps lock is on, also when I press the superficial for example. left button "qe" appears and when I press the right button the calculator opens... my laptop is compaq presario cq57 running windows 7 home... Thanks in advance...

  Hello again jeffrey27.

  It is difficult for me to say what would be the price of disks (as much as you are in a country other than mine).  However, it should be a minimal cost and a good thing to have a system failure such as having to replace a hard drive.

  I don't think using another PC to create a recovery disk is an option.  The disks are specific system (it might have small differences in the two booklets), and also may not be valid under the license agreement for Windows.

  I think it's information about your location.

  

• CS6: Is he still hear audio when you press on "&lt;" and "&gt;"?

  Hey, I was wondering if there was a way for me to be able to hear my audio when I press on ' < ' and ' > ' (ignore frames)

  It would be beneficial to me when I do the lip sync. Is there anyway to enable audio playback?

  Also this isn't a question of streaming audio, it works very well in the timeline panel. Just no audio not playing when I press on "<" and ">" "»

  OK, just checked, in CS6 the actual location of the Jsfl commands that you see under the orders of MenuItem is here (Windows 7):

  Votre_nom_utilisateur/AppData/Local/Adobe/Flash CS6 / yourLanguage_yourLocale / Configuration / Commands

  1.

  Now copy both this jsfl files in this directory (close Flash he can update the Menu)

  MovePlayheadFwd.jsfl

  Timeline = fl.getDocumentDOM () .getTimeline ();

  timeline.currentFrame = timeline.currentFrame + 1;

  timeline.startPlayback ();

  timeline.stopPlayback ();

  MovePlayheadBwd.jsfl

  Timeline = fl.getDocumentDOM () .getTimeline ();

  timeline.currentFrame = timeline.currentFrame - 1;

  timeline.startPlayback ();

  timeline.stopPlayback ();

  2.

  then edit the names.xml in the same directory and add

  before the closing tag

  3reopen Flash-> the two commands should now be available in the Menu commands

  4if you have never created a personal profile of shortcut, create one by duplicating the Adobe Standard existing in the command window button and name it "PersonalShortcuts".

  5where it shows the hierarchy of your MenuItems Navigate to custom jsfl commands you just added and assign them a shortcut

  6do not forget to click on save/change, so that the shortcut is actually added to your profile.

  When I test on my machine it produces the expected behavior: when I keep the related shortcut rear down he jumps through the timeline with audio streaming "audible."

• copy data from an frm another form using one-third of

  Hi all
  
  I have three forms f1, f2, f3
  
  in f1, I have order_no, value, address
  List of F2 to order_no based on formula 1
  F3 F1 for sale
  
  I want a button on f2, if I select a particular order no and press the button copy data from f1 to f3
  
  Please guide
  
  Thanks and greetings
  Vikas Singhal

  Hi Vikas,

  Then try the global variable way. In the n "f2" (all orders with the status of the list), in the WHEN BUTTON PRESSED trigger, assign the command not to a global variable.

  :GLOBAL.Str_Sales_Order_No := :.SALES_ORDER_NO;
  

  and then call the form of the sales invoice.

  and in the One TIME-NEW-FORM-INSTANCE trigger, get the values from the order to the sales invoice to use a SELECT INTO statement.

  SELECT SALES_ORDER_NO, ORDER_DATE, ............ INTO :SALES_INVOICE.ORDER_NO, :SALES_INVOICE.ORDER_DATE, ......... FROM SALES_ORDER WHERE SALES_ORDER_NO = :GLOBAL.Str_Sales_Order_No;
  

  Kind regards

  Manu.

  If this answer is useful or appropriate, please mark. Thank you.