Copy files to another directory

Similar Questions

• Unable to copy a file to another directory - no reason given

  When you try to copy files to another directory, I gor a message that lightroom can not copy.

  I have a screenshot of the message (in Dutch).

  The reason why he cannot copy is not given...

  According to the message, it seems that the place where you're travelling doesn't have enough permissions.

  Make sure that the destination folder has full read and write.

  Restart Lightroom after applying the permissions and then try again.

• probkem to copy a file to another directory

  Hello

  my page contains af:inputfile.

   <af:inputFile label="#{viewcontrollerBundle.SELECT_FILE}" id="if1" value="#{docbean.file}"/>
  

  the user must use this page to browse any file in its machine and uploaded on the server

  I use FileUtils.copyFileToDirectory () to copy the file into the directory. This method comes from org.apache.myfaces.trinidad.model.UploadedFile;

  It's the body of the method

  import org.apache.myfaces.trinidad.model.UploadedFile;
  ....
      public void uploadToServer(ActionEvent actionEvent) {
          UploadedFile myFile = (UploadedFile)this.getFile();       
              File outputFile =         
                  new File("D:\\SystemsData\\ScannedFiles\\" + this.getCurrentDocId() + ".tif");
              try {
                  FileUtils.copyFileToDirectory((File)myFile, outputFile);
              } catch (IOException e) {
                  e.printStackTrace();
              }
  

  at run time when I press the upload button, I get this error

  java.lang.ClassCastException: org.apache.myfaces.trinidadinternal.config.upload.UploadedFiles$FixFilename cannot be cast to java.io.File
  

  My Question is:

  How to make a cast of org.apache.myfaces.trinidadinternal.config.upload.UploadedFiles in java.io.File

  You cannot mount a the UploadedFile to a file. You must copy the inputstream provided a the UploadedFile in the file. I suggest that you download Commons IO - overview of common IO and use IOUtils to archive it.

  You can watch JDev11.1.2.1.0: manipulation of images/files ADF (part 2) | JDev & amp; ADF Goodies createBlobDomain (file UploadedFile) method that shows how to create a BlobDomain on the stream. In this method, you will need to write to the stream pointing to your target file.

  Timo

• Moving the local/flatfile file in another directory after loading?

  Hey,.

  After you have successfully loaded my (local) flat file of the HIVE, now I need to move it to another directory on the local system, so that a new flat file may come instead and so on.

  Is anyway to do this in ODI? Any procedure that I can write?

  Spend your order:

  1) OdiFileMove '-FILE =/home/hive/sample/sample_1.txt "" '-TOFILE =/home/hive/used/sample_1.txt ""

  OR

  "2) OdiFileMove " "-FILE =/home/hive/sample/sample_1.txt" "-TODIR =/home/hive/used.

• Copy files to another location without DateModified change using Javascript

  Hi Expert,

  I have a problem while copying a file from one place to another place. If I copied and paste manually, the update is displayed both as the same as the copied file. But if I did it with JS codes, show the date of the day for all (created, modified, accessed). I want the same as the copied file.  I worked on this in Java. But I need made using Javascript. Can someone help me...

  My code is:

  File ("C:\\Users\\Indesign\\Desktop\\New folder (2)-abc\\1.jsx").copy("C:\\Users\\Indesign\\Desktop\\New folder (2)"------xyz\\1.jsx "")

  Thank you and best regards,

  Vel.

  I'm sorry for the late reply, was unable to come down to that earlier.

  Here is an example:

  Main();
  
  function Main() {
      if (File.fs == "Windows")  {
          var file = new File("/E/Temp_1/Test.txt");
          var destinationFolderPath = "/D/Temp_2/";
          var destinationFolder = new Folder(destinationFolderPath);
          if (!destinationFolder.exists) destinationFolder.create();
  
          var vbScript = 'Set fs = CreateObject("Scripting.FileSystemObject")\r';
          vbScript +=  'fs.CopyFile "' + file.fsName.replace("\\", "\\\\") + '", "' + destinationFolder.fsName.replace("\\", "\\\\") + "\\" + file.name + '"';
  
          app.doScript(vbScript, ScriptLanguage.visualBasic);
      }
  }
  

• I want to copy all my jpg files to another directory (a portable hard drive) with some of the same names of JPGs, but not necessarily all. What will happen? The word 'COPY', will be some of the deleted files be added or nothing at all.

  I have a LOT of pictures in my computer (over a thousand) and I want to put them on a portable hard drive, I bought (1 terabyte) but I won't write any of the names of existing files with different images. IS THIS POSSIBLE? Do I need software or special hardware? I tried the copy/paste standard as well as move files to the new directory, but it seems that I can lose files. I'm not sure if the files that are missing (or lack, in my opinion) are not copied. When I finished emptying the directory, it shows that it is empty but the new directory does not seem to have any additional files that should be there based on the counting of the files before and after.

  Thanks for any help you can provide, Bill

  1: right-click and then drag the pix on the external drive. Release the right mouse button and choose copy here. They are there?  Now remove it from the computer.

  2: you can see pix of the same name overwrite each other, or be done with (1), (2), etc.. But even in this case, they will be interspersed with the former. If keep you them in separate folders with different names, that should not happen. Personally, I rename all the pix before storing them. You can select the set instead of the code of the camera and a group, rename the first holiday 2009 yo and the rest will be renamed holiday 2009 and each havf will one (1), (2), (3), after them.

  It is also a nice freeware tool which, among other things, can rename a group of photos easily.

  FastStone Image Viewer
  http://www.FastStone.org/

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• How to copy and paste a txt file in another directory

  It seems very simple. I used the "copy" of the function of advanced file. It worked fine until I created a standalone one. He made mistake and did not do what he did.

  Any idea?

  Thank you

  Opt_Ottawa

  Maybe a problem of path.  Remember that when you build your program into an executable, the executable file is added to the path, and you end up with a path of band more needed to get where you were during development.

  Do you have a miscarriage 7 has occurred to the new file?

• LoadLibrary fails with error code 5 after cloning project and SCF files to another directory.

  I have a project which communicates to an instrument on a USB UART.   The instrument telemetry packages are defined in the DLL that the main application load using LoadLibrary with a relative at the entrance path.  The plugin DLL is two directories below the application of all executable has been working well for months until I had need to clone the project (using Hg).  The cloned project is no longer responsible for the DLL.  The DLL is not corrupted as I can hard code their paths in my initial project for them and load them very well.  The cloned project concludes files (using GetFirstFile), so I know that the path string is corect, but that it is impossible to load the DLL using LoadLibrary.  The error code returned is 5.  Has anyone seen similar behavior when you try to copy or clone a project?

  Thanks for any help you can give!

  When you move or copy projects from one place to another I just copy the entire folder + subfolders and never had problems: CVI warns that roads had to be fix al corrects itself. However, error 5 should be "Access denied" then you can check the properties and the safety of the files copied to ensure that your code can access it properly.

  Otherwise, couldn't place the dll in some of the standard search paths? You will thus avoid problems in cases like yours.

• copying files to another folder

  In the past, I was able to copy (NEF, TIF, JPG) files from one folder to another by holding down the Option key button by dragging the thumbnail. All of a sudden, I can't do this and get a message "the operation could not be completed. An unknown operating system error has occurred. »

  I suspect that this can happen because I deleted the plist because I had other issues with Bridge (constantly updated). Or maybe because I went from Leopard to Snow Leopard?

  Suggestions on how to solve the problem of the OPT-drag?

  (Snow Leopard 10.6.3 and bridge 4.0.4.2)

  Thank you

  -Greg

  I feel that's what delete the plist file performs

  Without knowing the difference between them exactly, it is not the same.

  Sometimes resetting prefs is sufficient to cure bridge, if not then the

  combination to remove the plist of library user and reset

  preferences circled.

  But when problems also with cache as you describe it, it can also be

  allows to leave the bridge, remove also the file cache for the user bridge

  library cache folder, then also the plist and also option + reset prefs for

  The bridge is the solution.

  The last method is left heavy and means you must recache all files

  Once again. For my workflow not a big deal, follow these steps every now and then for fees

  things

• Shadow AE CC2014 copy file to another comp = crash!

  Copy and paste the shadow layer style to another composition blocks AE.

  This happens on Windows and OSX

  Is this a known bug?

  To work around this problem, use a command in the layer > menu Layer Styles add a layer style (any layer style) to the target before sticking layer. Then you can remove the first layer style that you have added. The bug only occurs when. gluing on a layer that has not already a Layer Styles property group.

  This bug is fixed in the next update:

  http://Adobe.LY/1pFGGRE

• HO to move files selected to another directory

  Hello

  How can I move files to another directory.

  For example, I want to leave *.txt c:\1 for d:\2.

  I so want to set the type of the vi and move to the other directory.

  And: It is possible to settle instead of *.txt, something like * .t so that all *.txt and *.t01, t02, tab and so on are moved?

  Thanks for your help

  
  

• [Q] how to copy files with the untouched directory structure of search results of Win7?

  Hello, I'm trying to easily copy a group of files found via a search in Windows 7 on another drive, but keep their structure intact directories, i.e.:

  1. search and find files in this directory:
  c:\Testing\My Files\file *. *
  c:\Testing\My Files2\file *. *

  2 copy the search results
  3. stick to
  d:\Testing\My Files\file *. *
  d:\Testing\My Files2\file *. *

  You would think there would be a toggle or a framework of Ontario Regulation or something similar to get there.  I can understand the need to make a copy of flat file as it does now... but is there a way to preserve the folder structure when copying?  Thank you-

  It's perhaps too tedious for you.

  You might select all search results and then shift-right click, select copy in the path. Paste the paths in Word and replace the entire paragraph is back with the Xcopy command for example

  Replace

  ^ p

  with

  "" F:\DestinationFolder/s ^ p xcopy ".

  If you intend to do a lot, you can have a blank Word document with a macro to do the work for you. You would need to remove the last line it will be just a part with 'xcopy' with no file name.

  You can then paste the final results in a batch file.

• Copy of complete site. I have a Web site. I would copy the entire site (complete with images) to another directory with a different name. Then, transfer to another hosting server. All ideas

  Copy of complete site. I have a Web site. I would copy the entire site (complete with images) to another directory with a different name. Then, transfer to another hosting server. Any ideas?

  Not sure that you need a different directory.

  If you are working on a local computer, create a new site with all the same settings for local files and change the remote server settings to match the second server.

  This ensures you that there is no difference between the two websites.

• How can I copy files from project Waveburner to another internal drive?

  How can I copy files from project Waveburner to another internal drive without losing the connection to the files audio orig.?

  Thank you for your time,

  Since no one answered my call, I sat and researched and studied WaveBurner behavior and I can myself answer my question and solve. Since there were a lot of people asking similar questions on WaveBurner files I will post what I learned.

  Whenever you drop your audio files in the list window to make your WaveBurner CD copy not copy your audio files, but relies on the original audio file, where they are located. So whenever you move the files orig. and you open WaveBurner, it can't find those and displays an error window to suggest it will search for the missing file or if you know where he is now lets you find manually. WaveBurner usually place the .wb3 project file that contains everything including your home folder.

  For this reason, I reserve now an audio file WaveBurner also folder in my home folder. In order to save themselves from WaveBurner cannot find the audio file, all audio files that I do, I put in my folder of audio files WaveBurner first, then copy them in WaveBurner from there.

  When I need to use a bigger hard drive I copy .wb3-WaveBurner projects based, but also my

  Sound folder WaveBurner for the home folder on the new hard drive.

  WaveBurner is now all audio files without problem.

  I hope that this will be a unique problem to someone else. Happy WaveBurning.

  W.W.

• Can I copy the recovery files to another partition D?

  Hello

  My drive came with C and D partitions, but I want to organize my partitions of different drive from the factory.
  I want to slightly reduce the system (C) partition, create a partition to 15 GB, copy the files from recovery to there (to keep the recovery files isolated) and rename this partition as the new D drive.
  The only thing that matters for the tool recovery work is to place the files on a partition of D?
  Has anyone done a thing?
  Will it work?

  Hey,.

  To be honest I have don t think that HDD recovery works if you copy the files to another partition.
  Why you want to do this?

  I use the factory form C: and D: partition by default. On C:, I installed all my programs and on drive D: I saved my files private photo, music, videos, Documents, etc.

  I don't see any reason to create a separate partition for HARD drive recovery files because they are saved in an additional folder.