Copy it / move the progress dialog box is absent and does not appear when you perform these tasks
Whenever I have move, copy/paste or cut/paste between windows folder nothing happens initially. After 10 to 60 seconds (depending on the number and size of files) they suddenly all appear at the same time in the other folder or begin to be displayed one by one. Because no progress bar / dialog box appears, I don't know if something happens and I often repeat the process (although, without knowing it, the action takes place). In the task bar, the folder icon does not show even a progress bar green on the icon to show that all this is happening. This problem occurs in all situations and all types of files, be it between folders on the same drive or on a network drive. I recently did a clean install of Windows 8 and, as far as I know, there are no other programs or major processes that occur in the background that may interfere with my actions. Finally, I also note that copying/moving/deleting files takes a lot more time than my previous Windows 7 environment. a 20 MB file copy immediately before, but it takes now longer than 5 seconds to complete.
Very frustrating.
Thank you
The f
- Use the Windows Media creation tool to create a USB bootable Windows 10.
- Boot from the USB key to clean Windows.
- Run Windows Update that there are no updates to be applied.
- Restart Windows
It worked for me.
Tags: Windows
Similar Questions
-
I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.
Please contact the original publisher of the widget.
Thank you
Sanjit
-
USB-6009 DAQmx meter task stops and does not restart when you restart the VI
I have the task of counter DAQmx which "hangs up" while troubleshooting a VI and does not restart when I restart Traoré. See attached fragment VI. The counter works reliably in normal operation, but some combinations of interruption and running "highlighted" causes to stop work. It's in LabVIEW 2009.
It will restart if I close the VI and reopen it. However, this causes losing me my window probe laboriously built with ten
the probes.
Is it possible to re - initialize a DAQmx task without closing the VI?
This significantly slows the troubleshooting.
As an alternative, if anyone can suggest a way to preserve a probe Watch window after closing of associated VI, it would be a work around.
Please do not take into account.
Counteract the work of task - it's the rest of the program which is hung up.
-
Hi, I have a problem with the AutoPlay dialog box. It does not appear whenever I am inserting a USB device into my laptop, it display normally if I insert a USB device. I tried to click with the right button on the drive removable (h :)), but I couldn't see "Open AutoPlay" anywhere in the right click menu.
I checked the AutoPlay Options in the Control Panel, it is enabled for all media. I already tried to affect the default settings, but it makes no difference. I also checked if the Hardware Detection service core is running, that is.
I even tried to delete all values in {HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer}, but he still did nothing.
I even tried to delete all values of
{HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer}, he did nothing either.I would really appreciate it if someone could please tell me how to solve the problem, I need to know which registry value to modify or remove to get the AutoPlay to run dialog box. And the registry keys that operate the AutoPlay dialog box?
Hello
Follow these steps mentioned below and check if that helps.
a. click the Start button, click principally made programs, Accessories, right-click on guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. at the command prompt, type net start shellhwdetection, and press enter.
c. restart your computer.For more information, visit the links below:
http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems
http://Windows.Microsoft.com/en-us/Windows7/Change-AutoPlay-settings -
using windows 10 action dialog box does not appear when you try to perfoerm image adjustment
When I select the picture setting and, for example, the levels, the dialogue window does not appear. Clicking any where just beeps and I have to press ESC to go back. Never had this problem before. Although I use Windows 10 I have everything worked out before. I uninstalled photoshop 7 and reinstalled but still the same. Someone at - it ideas
Ok! Be all of Photoshop and tools preferences settings.
1.) closing down Photoshop
2.) use your shortcut on the desktop to launch Photoshop IMMEDIATELY press on & press and hold Shift + Ctrl + Alt or shift + CMD + OPTION before Photoshop Splash screens.
3.), you will see a pop-up dialog box "Delete the Adobe Photoshop settings file?". Click YES.
4.) open Photoshop when right clicking on the tool in the Tools option bar and then click «Reset all tools»
5.), you will see a dialog box pop up "resets all the tools to the default settings?". Click YES.
6.) closing down Photoshop
7.) hold down a shift key and use your desktop shortcut to launch Photoshop.
8.), you will see a dialog box pop up "Skip optional loading and third party plug-ins?". Click YES.
9.) use Ctrl + N to open a new document in Photoshop default format.
10.) use Ctrl + L, you should get a pop-up dialog levels
-
SWF does not appear when you go back to the tab browser
I had a report of strange bug on a web application that we develop.
The SWF looks fine for the most part, but it's the user has several tabs open the browser moves to a different tab and then returned to the tab with the swf, swf file does not appear until the mouse scrolls on the swf.
At first glance it looks like the swf is not redrawn until the user with her intereacts (we do a fair amount of mosue on election). There she crept to save memory, the browser stops displaying the image and not redeisplay not until we explicitly have to redraw the scene.
Has anyone meet a similar situyation? I don't know where to start with this.
Some potentially relevant aspects of the swf file:
Most of the objects on the stage have chachAsBitmap set to true and that we apply a mask degraded to most of the scene, so there is a good amount of ongoing treatment and I know thishas caused a few other quirks to redraw.
The pace is on a very slow 4 frames per second and film is flown by a timmer.All the tracks would be appreciated.
The tester reported it was using Chrome 9.0.597.107 and Flash player 11.3.300.26
your pace should be significantly with fp 11.2 + opening another tab. the pace should return to normal when your new swf focus.
You can use throttleevent from the scene to detect these events.
-
Pop - up screen to record images does not appear when you connect the camera
Original title: when I plug in my camera to download photos I don't have a pop up screen to ask me some questions were to save you more pictures. I want the pop up screen to come back.
Guest USB? Download the pictures?Hello
- Are you referring to the AutoPlay window that appears when you connect a device to the computer?
What is the number and the model of the camera?
In case you are referring to the Auto play option then try the troubleshooting steps provided in the link below to fix the problem.
Troubleshoot AutoPlay
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems
-
Only the clumsy 'compact' mode is now available. Forums and tutorials that show all 'standards' import dialog. Forum Adobe suggests installing earlier version. Please tell us how this can be done with CC
BrianH
You should always use the 2015.2 or 2015.2.1 version which had the modified import dialog box. Update LR 2015.3 through the creative cloud desktop application.
-
Installation and first run of the FF, I get a collection box that is displayed for about 5 seconds after the program loads and displays the first screen. It obviously requires a response, but it contains no words. The box doesn't cause any Word show either. the screen takes over and no other button cannot be clicked: I have a hardware failure on FF.
Empty the gray bar, box, box white, question mark?
This irritating box was related to an add-on for AOL. In order to remove the extension of the problem, you will probably need to start Firefox in Safe Mode so that it does not work.
You need to close Firefox anyway, you can, for example:
- ALT + F4
- Right click of its mosaic on the taskbar > close all windows
- (Ctrl + Shift + Esc) Task Manager
To start Firefox in Safe Mode, hold down the SHIFT key while double-clicking the shortcut.
A small dialog box should appear. Click on 'Start mode safe' (not update).
Then you can go to the Add-ons page using either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click Extensions. Then on the right, locate AOL.
A little luck?
-
Have checked tutorials and help , but doesn't understand why hovering over the right angle, at the top of the track loop not give me the slider that allows me to draw on the track and extend the playback loop.
Long kickflip is the one that gives me a problem right now, but Latin Bembe Cowbell does not work for me either!
It is my first try at GarageBand, and maybe my last very soon. Thanks for easy to understand help you send.
The two loops work very well for me in GarageBand 10.1.1. Skip on the upper right corner of the audio region to display the cursor of the loop, if it is not, save your project and the test in a different project. Restart your Mac, if you don't have already done.
-
Selection of the type (reverse type) does not appear when you select type
I have AI CS5 on OS X 10.6.4. I just created an illustration. The problem is that when I try to type in this illustration, the text does not invert to indicate what was selected. The selection work; If I drag on the text, I would like to change, and then type the replacement text, old_text is replaced as expected. But it's as if we were working blindly.
This is a weird problem and happens only in this particular document. If I copy the content to another document, it works very well there. It doesn't matter if I change the police. The problem occurs constantly in the present a document even if I open the document on another Mac, so do not appear to be specific to the computer.
I found a solution by copying everything into a new document. However, I am curious to know why this is happening. I was wondering if anyone else had never seen this behavior.
Show/hide the edges (selected in the view menu or via the Hotkey Cmd / Ctrl + H) is a per document setting. That would explain what you have seen.
To "fix" your problem document, open, switch to Show Edges, then record under using the same or a different file name. (If you just Save without making further changes to the document, it will not take.)
-
new tab does not appear when you press the button "open"
A few days ago I suddenly can not open a new tab when you press the button open tab , press file-> open the tab, or Open the tab button next to a tab...
Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.
There are a few places to check for the Ask toolbar:
- Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
- Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons
-
I use Windows XPO professional and Outlook Express 6.
Otherwise, how do you mean "emails should display"? I don't understand the problem then. What do you expect when you start OE?
If it is not directly in the Inbox, you can have corruption and you can go to file | Identities and setup a new identity. Then see if it works.
Steve
-
Volume/brightness does not appear when you press the volume button on laptop keyboard
Recently, when I went to change my volume, the small bar has not appeared on my screen, showing how much I was going to the top. Brightness bar did not show either and it's really annoying because I never know how it is until music strikes out. Any suggestions on how to fix it? I'm totally lost.
Hello
I apologize for the delay in responding. It seems that the user profile that you are using has gone corrupt. Try to create a new user profile and check if you have the same problems here as well.
1. open user accounts by clicking on the button start the picture of the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
2. click on manage another account. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. click on create a new account.
4. type the name you want to assign to the user account, click an account type, and then click on create an account.
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-accountTo fix the corrupted profile follow the steps mentioned in the article below.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileTry using the tool (SFC.exe) System File Checker to check and repair corrupt system files. To do this, follow these steps:
How to run scan SFC1. click on the Start button
2. on the Start Menu, click all programs followed by accessories
3. in the menu accessories, right-click on command line option
4. in the drop-down menu that appears, click the "Run as Administrator" option
5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
6. in the command prompt window, type: sfc/scannow then press enter
7. a message is displayed to indicate that "the analysis of the system will start.
8. be patient because the analysis may take some time
9. If all of the necessary files any replacement SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
11 after the scan finished, close the command prompt window reboot the computer and check.
For more information, see the link below.
http://support.Microsoft.com/kb/936212
Let us know if this helps
Concerning
Anthony. -
Ssound window does not appear when you edit the sound levels
acoustic window on desktop dose not appear during level change
Hi anitorja,
Thanks for posting in the Microsoft Community. We need additional information about this problem to help you better:
1. What do you exactly mean by acoustic window?
2. where exactly you change levels?
3. were there any changes made to the computer before the question?
Provide us more information on this issue to provide the best solution.
Maybe you are looking for
-
How I when my windows 7 says firefox setup 10.0.exe cant be downloaded?
I am going through procedures for download - click on the green button for English (United States), then clicked on run when asked to perform or record, he spent a few seconds to download it and was pretty much complete when it suddenly saidFirefox 1
-
Peer to peer between SMU-5451 and SMU-7966R
Hello I would like to connect two devices - SMU-5451(waveform generator) and SMU-7966R(NI FlexRIO) with the P2P streaming. I want to transmit data from FPGA to the generator and I took the example of NOR-FGEN. When I started host-vi, there is an erro
-
Hello This should be very easy, but for some reason, I'm going to have questions. All I want to do has a switch control a digital output. I use a card NI 9742 Dsub (link), which should be capable of digital output. My code, with a simulated map is at
-
Downgrade from 9.0 to 8.1 LV LV
Hello to all the powerful LV Wizzards, First of all I am new to lv. * NEW *. Secondly, this program will do some automatic tests, and what you see there probably works 100% as long as its supposed to be since I've not finished 100% but I would rather
-
OfficeJet pro 6830: scanning problem
Hello I am trying to scan several pages... but the option ' save under... ". ' is not available. I would like to save it as a pdf file. As soon as I clicked on my computer, the next option is to 'Start scan '. Please notify. Thank you