Copy of DVD of Windows 7

Similar Questions

• COPY A DVD USING WINDOWS 7

  I COPIED THE OLD TAPES VHS VIDEO TO DVD USING ROXIO 10.  THEY WORK VERY WELL.  NOW, I WANT TO MAKE A COPY OF THE DVD TO GIVE TO MY CHILDREN AND NOTHING ORIGINAL I TRY SIMPLY ALLOWS ME TO COPY THE DVD.   WHAT GIVES?

  I COPIED THE OLD TAPES VHS VIDEO TO DVD USING ROXIO 10.  THEY WORK VERY WELL.  NOW, I WANT TO MAKE A COPY OF THE DVD TO GIVE TO MY CHILDREN AND NOTHING ORIGINAL I TRY SIMPLY ALLOWS ME TO COPY THE DVD.   WHAT GIVES?

  ==================================
  If you have the full version of Roxio I guess
  It has an option to copy a non-commercial DVD.
  If it's not... see the following information:

  The following freeware can create an ISO Image
  that allows to burn copies.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (During the installation there will be an option to install
  the "Ask Toolbar"... you can uncheck only)

  The following tutorials may be worth a visit:
  (basically you use ImgBurn to create an ISO Image...
  then you use ImgBurn to burn the ISO Image on a
  new blank DVD)

  Check out the following tutorials...

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Copy of DVD in Windows 7

  At the risk of embarrassment, I need to ask a fundamental question to make copies of my new conversions of 8 mm/Super8 family movie for distribution to my brothers and sisters.  Drag / drop in windows Explorer caused by burning "Start the DVD" and "Video TS" files to the blank disc, but the new copy wouldn't play on my dvd player.  Looking for recommendations on making DVD copies.

  Thanks in advance.

  Bob

  PS. does anyone know why my profile picture doesn't show on this or any post?

  I'm with you. These ads ARE sticky, but then with most of the freeware, they became a reality.

  This shows where go dvdfly.fr, by the REAL download page:

  

  Good luck and hope that helps.

  Hunt

• Is there any place in the windows vista where the files to write on the cd/dvd via a copied cd/dvd temporaily burner?

  Is there any place in the windows vista where the files to write on the cd/dvd via a copied cd/dvd temporaily burner? who can be recovered later in the case of the unsuccessful cd/dvd writing?

  Hi Usmansami rana,

  Integrated into the files of caching of Windows Vista to temporary folder when you start burning discs in Windows Explorer or by using a burning program. However, the temp folder is get deleted as soon as the burn completes successfully or not and you will not be able to recover the files.

  Hope this information is useful.

• make a copy of a dvd with windows media player

  A few years ago I had some old movies on vhs that I managed to copy onto dvd discs when I got a dvd recorder.   I would now like to make copies of these records.   I am using media player but I'm not good with this.  I put a disc in the drive of my laptop and it plays without any problems.  But what I do after that?  to import the contents of the disc to my library?  all attempts to do so have not - I have to do something wrong.  When I look to the top of 'help' it especially assumes that you have already backed up files/folders on your pc, any help at all would be appreciated.

  Windows Media Player cannot copy or burn video DVDs.

  Here's a way to copy the DVD. You start by creating
  an Image of the DVD then you burn the image on
  your drafts of DVD.

  If this is 'not' a commercial - protected against copying DVD...
  the following freeware can create an ISO Image
  that allows to burn copies.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.5.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  How to write DVD video files directly to the simple media layer using ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=4632

• How to copy DVDs in Windows Media Player

  How to copy a DVD (it can be copied) on my laptop through Windows Vista/Windos Media Player to burn another disc?

  You need 3rd party burning software to copy DVDs in Vista.

  http://www.SnapFiles.com/get/burningstudiofree.html

  Ashampoo Burning Studio Free is a full CD/DVD/Blu-Ray suite which allows you to create data disks, music, video and audio burning. You can also create backups that span multiple discs, rip music from an Audio CD and create or burn disc in ISO or BIN/CUE format images. The task-oriented interface makes it easy to get started and will spare you most of the technical details. Other features include the conversion of files to WAV, MP3, FLAC, WMA and Ogg audio automatic, disk copy compressed backup file and restore, erasing the disc, VCD/SVCD, burning project and support more. Free registration required after 10 days.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I copy a CD/DVD in Windows 7 without any additional software?

  Well... I want to make a copy of a CD/DVD in Windows 7 without having to install any additional software. Is this possible? I mean I really think something like option to copy CDs that are extremely easy to find.

  The answer is you can't. Not with Windows 7 64 Bit Enterprise Service Pack 1 when you are a user and not an administrator.

  & Support offers you a video to show you how to copy the data from your computer to a disc that can be used on a variety of devices (called a mastered disc) or copy data to a disc that works as a (Directory Live) USB Flash drive on an XP or a newer operating system.

  You will need additional software installed on your computer, you can install if you have administrator privileges on your machine.

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• Is A satellite - possible to copy a DVD on my PC?

  Is it possible to copy a dvd on my pc since the dvd watching on Windows Media Player.

  Hello

  I guess you want to watch a DVD movie on your laptop?
  Right?
  Well, you need a software DVD player to watch a DVD movie.

  I use VLC Player it s small and freeware software that allows to read almost all file formats.

• Re: A500-1GL - create a CD/DVD of Windows 7

  Anyone know how to create a CD/DVD of Windows 7 from a source that is preinstalled on the HARD drive?

  Hello

  A recovery of the software on your computer image is stored on the hard drive
  disk drive and can be copied on a DVD by using the following steps:

  1. Select the two blank DVD media.

  2. the application will allow you to choose from a variety of different media on which the recovery image can be copied, including DVD-R, DVD-R DL, DVD - RW, DVD + R, DVD + R DL and DVD + RW.

  3. turn on your computer and let it load Windows 7 operating system from the hard disk as usual.

  4. Insert the first blank media into the optical disc drive tray.

  5 double-click on the Recovery Disc Creator on the Windows7 desktop icon, or select the application from the Start Menu.

  6. After Recovery Disc Creator starts, select the type of media and the title you want to copy, and then click Create. If your optical disc drive can only write to CDs, select "CD" as the 'Disc Set' in the Recovery Disc Creator application. Otherwise, if your optical disc drive can write CD and DVD, select the media type you want to create.

  ? Make sure to plug the power adapter when create you recovery discs.
  ? Be sure to close all other software programs except the recovery disk creator.
  ? Do not software such as screensavers that can put a heavy load on the processor.
  ? Use the computer to full power.
  ? Do not use the energy saving features.
  ? Do not write on the disc when antivirus software is running. Wait for it to finish, then turn off including any virus detection programs software that checks the files automatically in the background.
  ? Do not use public services, including those to improve hard disk access speed. They might given unstable operation and damage.
  ? Not shut down/logoff or sleep/wake extended while writing or rewriting drive.
  ? Configure the computer on a flat surface and avoid locations subject to vibrations such as planes, trains or cars.
  ? Do not use on tables unstable or other any other unstable surface. Please note that certain media above may not be compatible with the
  optical drive installed in your computer. So you must check that the optical disc drive supports blank media you have chosen before you continue.

  I copied the user manual

  Welcome them

• How can I copy video to my windows media player?

  How to copy DVD to my windows media player?

  Hello
   
  (1) what version of Windows are you using?
  (2) you are trying to burn DVDs with Windows media player?
  (3) what is the format of the file you are trying to burn?
   
  Perform the following steps to copy the file to a ligthscribe.
  (a) open the DVD/CD player, right-click on the file you need to copy, and select 'COPY '.

  (b) stick on the location where you need in your hard drive, or paste it in a library.
   
  See the methods mentioned below that will help you in burning a cd or dvd using Windows Media Player, if you are using Windows vista or Windows 7
   
  Method 1:
  Burn a CD or DVD in Windows Media Player
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  See also:
  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions
   
  Method 2:
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  See also:
  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions
   
  Method 3:
  Add items to the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-items-to-the-Windows-Media-Player-library

  Hope this information helps.

• I don't know how to write a dvd in windows... Can someone guide me

  What are all the methods to write... a simple no recommendations... Please please me quick guide... I dodnt know to write a cd/dvd in windows...

  1. If you want a copy of the dvd, then most of the writing software dvd has a copy dvd option.
  If it's a commercial dvd and there on it copy protection will not work as it is illegal.

  2. Yes, you need software authoring dvd like nero, roxio to create your dvd-video disc.  There are some free as dvd flick programs if you do not already have on your pc.

• I bought a DVD of windows 7 and installed in a desktop computer. Unfortunately my Activation of Windows to a new computer

  I bought a DVD of windows 7 and installed in a desktop computer. Unfortunately, my office got fried due to power surges. Now, I want to install it in a new computer.  can I turn it on again. Best regards, Anisur Rahman * address email is removed from the privacy *

  If your copy of Windows is an OEM (delivered in a cardboard cover, as a single disc) then no. - the license was related to the motherboard of a fist on which it was installed.

  If it's a complete detail of the product (fancy box, two discs), then Yes, you can install it in the new - activate by phone.

• problem importing from dvd in windows movie maker

  made a dvd with windows movie maker home but now I want to change it, it is possible to re - import into windows movie maker on the dvd that I did?

  made a dvd with windows movie maker home but now I want to change it, it is possible to re - import into windows movie maker on the dvd that I did?

  =====================================
  DVD files you need for editing are the
  . VOB files. Copy them to a folder on your hard drive
  drive. You can find them on the DVD in the VIDEO_TS
  folder.

  First... just try to rename one of the. VOB files to
  . MPG and see if it will matter in Movie Maker.
  If import works... drag the file to the timeline and
  Economy/publication it to .wmv or .avi format. Then...
  Re - import new video film for editing purposes.

  If this does not work... rename the file back to VOB and try
  convert the .wmv or .avi file using the following
  free Converter:

  SUPER © Simplified
  Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster)

  (FWIW... it is always a good practice to create one)
  System restore point before installing new software)

  After installing the program GREAT... open...
  you will see two small circles at the top left
  corner of the screen... check the UPPER circle.

  Now... Drag/Drop your. VOB files in the current field.

  Output container... Choose wmv...

  Video scale size / no change

  Left, click the Encode button.

  Choice: A Simple Profile / OK...

  Wait...

  (FWIW... I have better luck with video if I'm not
  try to multi-task while a file is being converted)

  When the file is converted, you should find it in...
  Program Files / eRightSoft / Super / exit.

  Or... you can type... CTRL + T.. o open the Save
  Window and choose a backup folder.

  Good luck... John Inzer - MS - MVP - digital media experience

• Is there a free software to convert DVDs to Windows Movie Maker software

  Hello

  I have a problem loading the images to a DVD in Windows Movie Maker. Can someone point me in the right direction? I'm looking free software which will convert a DVD to a file compatible Windows Movie Maker.
  Thank you.

  The following steps may be worth a try...

  I'm guessing that this isn't a step a commercial DVD
  with protection against copying? If_yes_read on...

  FWIW... break the copy protection on
  commercial DVDs is illegal.

  Insert the DVD into your DVD drive... If AutoPlay or
  Launch of Windows Media Player... just close them.

  Now... to... Start / computer... a click right on the
  icon for the DVD player is in and choose...
  Open or explore... it allows to display the directory
  the DVD.

  Find the VIDEO_TS folder and open it... video
  files have a. Extension VOB.
  Copy them to a folder on your hard drive... it
  Maybe more than VOB files and those with the
  larger sizes of files are the ones you need.

  If you're running Vista Home Premium or Ultimate...
  You may be able to import the VOB files directly
  in Movie Maker.

  If not, try renaming the. VOB files. MPG or
  . AVI and try to import into Movie Maker. If this
  works... drag in the timeline, one at a time
  and publish (save) in the .wmv format.
  Then reimport the files for editing .wmv.

  If still no success... you will need to convert the. VOB
  format .wmv before import into movie files
  Machine to...

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...