Copy the data from CollaborateSync to the other pc

Similar Questions

• Copy of data from oracle to *.csv

  Hello
  
  I have Oracle XE on my Red Hat Linux dedicated server. I want to generate a *.csv for a specific instruction file.
  
  Help, please
  
  Is the best

  Hello

  You can can solutions if search you in the forums. See the link below
  Create a CSV file

  -Pavan Kumar N
  ORACLE 9i / 10g - OCP
  http://www.oracleinternals.blogspot.com

• How to copy data from one hard drive to another after the upgrade?

  I have a HP e9220y, and I recently bought a new hard drive for it. There is nothing wrong with the former, but this one has a 64 MB cache and 7200 RPM so I hope it will be a little faster. I installed it and it works fine, but I want to copy all data from the old disk to the new so I can start everything off the faster hard drive and I seem to have a bit of doing wrong. I can't just copy and paste because of the Windows system files that are used. And last night when I set up Windows backup, and went to bed, when I thought it that Windows has recovered from a stop unexpected, rebooted, and only 2 GB of data saved obtained.

  What is the best way to move all the data from the old drive to the new drive, make it the default C: drive and move partitions system and factory_image as well? Thank you!

  Please read this link to another post made by Big_Dave and myself

  http://h30434.www3.HP.com/T5/desktop-hardware/hard-drive-imminent-failure-problem/TD-p/438567

  (1) If your old drive and the new drive is Seagate or Western Digital, then free House with their cloning software.

  (2) before starting the clone process, I found best to perform a disk cleanup and defragmentation.

  Cloning software to copy the two partitions. Example:

  Old drive 250 GB formatted to 232 C: created 220 and 12 GB D:

  New 1000GO drive formatted to 931 GB created 919 GB C: and D: to 12 GB

  The "Seagate disc Wizard" cloning software will let create you a clone automatic or manual partition resizing.

  The two modes to offer an overview of the actions before commit you. The manual on this page of Seagate (PDF) is 68 pages.

  After the cloning process he complete, all you have to do is swap on the disks. Besure to connect your new disc on the original motherboard SATA port.

• Need some ideas on the copy of the data from one schema to another.

  Dear all,
  
  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  
  
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.
  
  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.
  
  Thanks in advance...
  
  Concerning
  Suresh

  GSKumar wrote:
  Dear all,

  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.

  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.

  I don't know why you don't want to opt for EXP/IMP.
  As an alternative, if you have a link DB between Production and Test pattern (which I seriously doubt), you can use the MERGER to a copy of data from Production to Test Delta.
  a. INTRODUCE IN test_schema.table_name SELECT sequence_columns, column_list FROM (SELECT column_list FROM prod_schema.table_name LESS SELECT column_list from test_schema.table_name)
  Column_list must not contain columns that contain sequence values because they may differ and result in an incorrect result; Therefore, this is taken into account in the outer query rather than Inline mode.
  b. MERGE STATEMENT
  c. FALL of test_schema.table_name. CREATE test_schema.table_name as SELECT column_list from prod_schema.table_name; -A way very neat to copy all the data, provided you do not keep any changes to test the tables in the schema.

  However, you mentioned to find existing records based on the primary key; IMO, primary key is normally a sequence (may be alphanumeric) and its value on env Production and Test may defer or even can have different attributes, therefore, I find it incorrect to match only the primary keys. I would say to match the key attributes.

  If you want to follow the last update/insert for a record, you can add a column that puts the time of last modification. In this way, you can track the changes of a column. Another alternative would be to use a check to the table.

  Let us know your thoughts or concerns, so that help can be provided.

  I suggest that you read and follow {message identifier: = 9360002}.
  If you will be useful if you can provide all the information required in advance to help us provide you with a quick resolution.

• HP dv9000 vista laptop won't start. Cannot 'fix '; BIOS Diagnostics: all GOOD except Hard Drive check result: replace the hard drive NEED the data from this hard drive!

  HP dv9000 vista laptop won't start. Attempt to restore repair result several times cannot be made online. BIOS ran diagnostics, everything was good except the hard disk, hd chk result: replace the hard drive. F11 entered to access advanced hp Recovery Manager options tempted towards the top of the entire disk, all files show while listing to back up, attached to my external hard drive current over the back with success.  Plugged external on another laptop, new files since the previous backup are no where.  Should I buy a new external hard drive and repeat the backup via Recovery Manager Advanced Options or should I remove the internal hard disk and insert it into a case and apply in usb on another laptop to view the files.  I know when my computer crashed, I had too many windows/tabs open and too much process and tried to interrupt a process and I confused his little brain and now he has Alzheimer's disease.  I am freaked because I'll lose everything 2012 including some very important documents and about 50 000 pictures HD (yes I learned my lesson backup!) I am in crisis mode because I recently became sick and my photos and documents is vital for my next year of chemotherapy and radiation. Please advice are extremely appreciated. Thank you

  Hello

  This backup after pressing F11 is a HP backup option, not a Microsoft option.

  I suggest that you contact HP or ask their Support Forums.

  http://h30434.www3.HP.com/

  It's the normal advice I'd give to record data; but we have no idea of the State of your hard drive.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  See you soon.

• Copy data from one to the other members of the siblings

  I have the hierarchy of entities such as:

  1234-abc-777

  -1234-abc-777-a11

  -1234-abc-777-b12

  -1234-abc-777-c15

  and I have to copy the benefit rate which present in 1234-abc - 777-> usd - > real-> 1234-abc-777 children final. I can't hard-code as I haved this type of hierarchy of 30.

  Is it possible to use any function to get 1234-abc-777-a11. I tried to use the function @Match dim crosswise but I receive the error message when running the script.

  Note:-a11 is common in any other hierarchy 30.

  Hello

  Glenn, I agree that it will create blocks that are not required if you use the DATACOPY approach. But it may be advantageous to have your rate to the level that you are calculating the data (but only for valid data of block combinations)

  The way I approach this kind of requirement is using this three-step process. I have a previous post where I posted a detailed script.

  1. set on RELATIVE("Entity",0), but delete the entities holding rates, in this case use a UDA called RATE_INPUT for example and assign to entities where you enter the rate.

  Then using calc dense 'rate' = #missing to clear the old values from rates against all entities not RATE_INPUT

  2 aggregate rate to the entity above, where the rate is entered. This will mean that the entity kinship is equal to the entity that has RATE_INPUT uda

  3. FIX on RELATIVE("Entity",0) but remove the entities holding rates

  Then using calc dense 'rate' = @PARENTVAL (Entity) to enter the tax rate of the parent.

  The advantage of this method is to push a rate only to entities that already have an existing block. So not more your database or the number of blocks

  Thank you

  Anthony

• Composite planning form, copy data from one tab to the other?

  This is something I've heard of someone who did but have not actually seen. The requirement is to copy data from an existing entity to a new entity as a means of values seedlings early in the budget cycle. I was thinking about a form of 'source' and a form of 'target' within a composite shape. A calc would make a copy. After copying the Scheduler can manually adjust values, or type values in the accounts that the source had no data.

  If someone did please let me know how you did and what looked like the calc.

  Thank you!

  FA

  Hello

  Yes, this can be done in several ways. The calc script would be similar to what is mentioned above. But in regards to the copy, you can also create a menu on the source form set a rule of company on the menu and start the copy that also offer users the ability to choose several invited outside of the entity if necessary.

  Thank you

• Datacopy do not copy data from one to the other in a sparse dimension.

  Hi I m using the following script data copy of Act scenario to the scenario Fcst1, but I can't recover the data after it's done. I understand that datacopy should new blocks if necessary to copy new data. Is - this datacapy cannot copy data if there is Fcst1 blocks already created for this intersection?
  
  Please help, I don't have any ideas to the left, I can't make a datacopy!
  
  ESS_LOCALE English_UnitedStates.Latin1@Binary
  UPDATECALC OFF SET;
  SET MSG SUMMARY;
  SET CLEARUPDATESTATUS AFTER;
  SET CALCPARALLEL 3;
  
  
  SET CREATENONMISSINGBLK
  
  
  Fix (@relative("Income_Statement",0),
  "FY09",.
  @Relative("Q1",0),
  'Local_Cur', 'USD')
  
  / * Copy the forecast data of the forecasts for the month - Jan, Feb and March Act * /.
  
  ClearData "Fcst1";
  
  DATACOPY 'Act' to 'Fcst1 ';
  
  ENDFIX
  
  CREATENONMISSINGBLK OFF SET;

  Yes, DATACOPY does not support dynamically calculated members. It's a pain.

  Without changing your code too, could do you:
  DATACOPY ActChild1 to TransCanada.
  DATACOPY ActChild1 to TransCanada.

  ↑ This will take care of creating block.

  Then:
  FCST = ActChild1 + ActChild2;

  ^ This should work without the parameter CREATENONMISSINGBLK DEFINED as two DATACOPY instructions will take care of that.

  Kind regards

  Cameron Lackpour

• How to copy the meta data of location of one photo to others

  In iPhoto used to be possible to copy location of metadata from one photo to others by selecting a photo and the "paste special" in photos of the selected target information. To my disappointment, I discovered Apple either has hidden this option very well or he just disappeared. I hope for the first, but I fear that this very handy as feature was just emptied into the sewers

  So my question boils down to: how to copy a location in 1 photo to other metadata?

  OSX10.11.1, pictures 1.2

  You cannot copy the location directly by copy and paste data.

  You can type in the latitude and longitude in the "Attribution of location."  To be able to do this export the photo you want to copy the latitude and longitude of and open the Info Panel in the Finder by clicking the photo and urgent ⌘I.  The "more information" section of the Panel Info will show you latitude and longitude.   Type the value in the field of the photo you want to copy you latitude North and longititude to.  Use decimal degrees, with a decimal point.

  

• Copy the data from USB key for comments

  Dear all

  How can I put a USB and copy some data and programs from other PC to a guest VMS on ESX 3.5?

  You can also buy USB hubs attached ethernet. With these, install you an agent on the virtual machine and she moved the USB stick as if it was connected directly to the virtual machine.

  See:

  AnywhereUSB

  http://www.Digi.com/

  Belkin network USB hub

  http://gadgets.fosfor.se/Belkin-network-USB-hub

  http://reviews.CNET.com/networking-and-Wi-Fi/Belkin-network-USB-hub/4505-3243_7-32467513.html

• Copy the table data (including images) of InDesign to Excel (or other formats such as RTF)

  Hello

  We have a problem trying to get data to InDesign to Excel.

  He has this price list in InDesign, with images and small "icons" (also images) that indicate which element appears under the main image for each row in the table. Each line of 'table' can contain a number of elements, separated by return cart + line break or a similar combination.

  The problem is that we can't get good data and images appear in any other editable format. Copy and paste directly into Excel was still the most successful, but here the images are lost. Export to PDF and Acrobat Pro, exporting to other formats always seem to fail in a way or another (paintings take place on top of the other, images and so on, has lost different for the different export formats).

  

  Data copied to OpenOffice Calc (and then saved as a file in excel format). Yellow areas added to show where the images were in InDesign.

  Price a bit blurred in the picture showing above.

  Are there good ideas how to copy the InDesign table to another editable format (which requires no licenses Adobe...)?

  Thank you

  Andreas

  I didn't notice the direct export from InDesign to RTF. You had to put the cursor within the story make this option appear!

  It is really good, and I sent the result to those who will use it, for them to check if she's good enough and if they can take for excel or work with him in the RTF format as is.

  Thanks a lot for pointing out this option!

• I'll copy Mozilla firefox from one computer to the other. I don't want to download from the internet, I caught the virus of "Babylon" in this way.

  (1) you really have to make it easier to contact support. Get rid of password requirements!
  (2) I would copy safely Firefox from one computer to the other. I don't want to download from the internet. Really, we love and use firefox. I had to remove firefox because it came with the virus of Babylon.

  If you have been Babylon when you installed Firefox you may have installed it from an authoritative source (the only official place and secure to download Firefox from www.getfirefox.comEast). Please, never download Firefox from anywhere else.

  So, for your computers, be sure to download Firefox from www.getfirefox.comand you download the version official, convenient and safe.

  If you get Babylon on your computer, you can remove it easily without having to remove Firefox by reading How to remove the toolbar of Babylon, home page and search engine (Please note that Babylon is not affiliated with Firefox and we actively seek to solve these problems).

• When I try to import the Favorites of IE using "Import Data from Other Browser" it is grayed out. Why is this?

  I'm trying to follow the instructions of the Firefox Help. Step 2 to import bookmarks is to select the option "Import data from another browser" in history-library-import and backup. However, this option is grayed out for me and I can't select it. Why is this grayed out? How can I make this?

  Make sure that you do not use Firefox mode of private - browsing using Firefox without saving history .

  • To view the history settings and cookies, choose: Firefox > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • : Uncheck the [] "always use the private browsing mode.

  Now do-> Import Favorites to Internet Explorer

  Check and tell if its working.

  Not related to your problem, but your Plugins are out of date

  • Update all of your Firefox Plugins-> https://www.mozilla.org/en-US/plugincheck/
  • During the installation of the Plugins download files hotfix, remove the check mark to download any other software options with your Plugins (for example, toolbars, McAfee, Google Chrome, etc.)

• How to copy the data from Palm Desktop on a PC running Windows 8.1

  If like me you still find the Palm Desktop data (addresses, calendar, notes, etc.) handy and use it long after throwing the combined capacity and 'sync', you can see this is useful.  I bought a new PC running Windows 8.1 and had problems with data transfer due to a problem as I understand it, which does not exist in Windows XP, Vista or 7 versions.  Here is a summary of a way to easily transfer data from these earlier versions if you have a USB flash drive (or Dropbox, Google Drive, whatever) very convenient:

  (1) Download Palm Desktop 6.2 or 6.2.2 to your new PC.  Give a user name exactly as it exists in the database from your old PC.  This name will serve as Office Automation to create a folder name of six letters (an abbreviated version of your name) to hold the data that Palm Desktop will turn upward.  Wait a few seconds for this to happen, and then close the application on your new desktop.

  (2) in your old PC you want to transfer data from, find the folder named "Palm OS Desktop" which should exist in 'Documents' under path of folder and subfolders 'Users' as > your subfolder name > Documents in Windows 7 (can also be Vista) or may be under "Documents and Setting" folder in Windows XP.

  (3) in this folder "Palm OS Desktop" search this subfolder of six letters of your name and select this whole subfolder and select 'Copy' or Ctrl-C

  (4) locate the same name of subfolder in your new PC (which will have data zero), delete and then 'paste' the subfolder you "copied" in the exact same location.  If you did it right, Viola!  Your new desktop PC should display all the transferred data, once you open the application again.

  Most of the same procedure works with PC Windows 8.1 (probably also Windows 8).  What I found different is that the subfolder of data created under "Palm OS Desktop} had 7 instead of 6 characters with a"0"(zero), added as the last character.  When finally, you copy and paste this subfolder in the new PC there so rename and add "0" for the Palm Desktop to locate these data.

  I hope this helps.

  Data in XP is located in C:\Program Files\Palm (or PalmOne) \ < your HotSync name truncated > \Backup.

  HotSync for Win8 has been available for quite a while now!  See the post at the beginning of this section called "64-bit Windows USB drivers for Palm Desktop" for instructions and driver downloads.

  Palm Desktop 4.x and 6.2.2 use different database formats - 6.2.2 went to .mdb as an extension.

  Best way to migrate data is to perform a HotSync on the new machine, or use the built-in in Palm Desktop Export/Import option.  Export the addresses and calendar files, and then copy those of the new machine.

  The import option to retrieve data.

  WyreNut

• How to copy the data from the indicator table 1 d to the Clipboard

  Is it possible to copy data from table 1 d indicator to the Clipboard as a text and for more than one cell?

  I use LV8.6.

  Leszek

  Sorry, I wasn't sure if it was available in 8.6, apparently not.

  You could create an indicator of fine print and use 'picture to a worksheet string' to complete. Now, you can just cut & paste the text instead.