Computer monitor HP W2072a

Similar Questions

• Lights up turn of the computer - monitor remains blank

  • About 5 days ago, I was using my computer as usual. I have a game, was talking to some people and play music, everything works fine. Out of nowhere, my screen locked up, I thought he was just a typical gel, so I waited a minute or two while trying things like the Ctrl alt del and alt + tab, none of these things, do nothing at all. To speed up the process, I turned off the computer manually and turned it back. After back on the screen remains empty. When the device is turned on and that everything is working normally, the light on the power button on the monitor to blue. When the computer is not turned on but the monitor is, or when the computer is in "standby", the power button goes orange. After turning on the actual computer monitor screen remained pure black, and that the switch remained orange. The computer itself seems to turn on normally, the green light in the back turns on and remains solid, the two fans inside the Tower lights up and there is the noise of typical general snoring from the computer. Since then, I tried to unplug drain all the power and turn it back on, I reinstalled the RAM, I checked the card plugged into the VGA port has been completely connected (it was a problem in the past after sending in my computer when the VGA port had been fried. The symptoms at the time were essentially the same ones they are now corrected again when an operator HP had me check if this card was plugegd, it was not completely, I pushed it and it worked fine.) Anyway, this time I tried this card verification. I pushed a little more to check if that was the problem, it doesn't change anything. I tried another monitor (with a different cable), that doesn't change anything. My warranty on the computer turns off, so my only way to contact HP for help is with the online chat, and this conversation has done me any good. They had me try all the things I had already tried and then just told to take it into a store.
  • The computer in question is a HP Pavilion Media Center TV m8020n PC
    http://h10010.www1.HP.com/wwpc/ca/en/Ho/WF06b/12132708-12133156-12133158-12133158-12133158-79681383-80144481.html
  • The operating system is windows vista Home premium
  • I don't have something new installed recently, the only thing I can think anywhere near it at all in the last few weeks would try to load a camera to plug into a USB port on the front and put the memory card from the respective device in one of the memory of the computer on the front card readers.

  No, the second port works do not means that the embedded video is disabled. Here's a video explaining how to remove the video card. It has a tab, that you must move to release the card. Scroll down and you will see the different models.

  http://support.HP.com/us-en/document/c01177594

  It could still be the video card. Try to remove the card completely and the embedded video. Since your unable to see the screen, you can not enter the bios to see if the edge can be activated but sometimes when the card is to remove the edge can activate itself. If no luck, try another video card.

• Captivate poster presentation perfectly in the computer monitor, but page layout errors occur when projected.

  One of my coaches who reported when she tries to project a presentation of Captivate, it displays perfectly in the computer monitor, but in the projected image, the Table of contents will move to the right and covers the project. Someone at - he heard of that happening before? Any suggestions on how to fix?

  What is the resolution of the project? A separate table of contents or overlay? During which the resolution is all projector? Especially also the aspect ratio? If a Captivate published file must be used in a presentation, I use to convert a pdf interactive: easy to scale and play in full screen. I don't know who published output you use?

• An announcement of computer monitor, I read recently declared "Adobe 99%".  What does that mean?

  An announcement of computer monitor, I read recently declared "Adobe 99%".  What does that mean?

  It shows 99% of the Adobe RGB range, which is great if you change in this color space. Most monitors cover smaller sRGB for the web.

• How should I fix the color of the computer monitor in my video?

  I need to cheer up and the computer monitor on a video clip of white balance. The camera zooms in this clip and pans in another, if it is not a static video. How can I make adjustments on the monitor as the camera moves only?

  If you only want to color correct the screen, you may need to use some kind of motion tracking in After Effects. Maybe this thread should be moved to the forum of AFX.

  Richard Knight

• Presario C700: laptop computer monitor

  There is backlight of my laptop came out, and when I checked the cable for the monitor, I noticed that the cable has a few threads that are broken (warranty laptop was gone until I checked the cables) and I was wondering how it would be to get the cable replaced so that the monitor can be used again. The cable P/N is DC02000FM00.

  Here's the part on eBay:

  http://www.eBay.com/ITM/HP-Compaq-Presario-C700-G7000-IBL80-LVDS-LCD-video-cable-DC02000FM00-454919-001-/400825622756?hash=item5d5311a0e4:g:AOkAAMXQlgtSy5TA

  HP does not install this for you he will either have to be DIY or buy the part and bring it to a repair place local computer and work would probably $ 50-$100, or on what the laptop is useful. It's a thing of medium difficulty. Here is the manual if you want to see how to do it yourself:

  Your manual

  If you need assistance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• computer monitor do not fill.

  The opening on my desk has declined, leaving black bars on the left and right. How can I return it a mode full screen?

  Hello

  1. look for a reset button auto on your monitor.

  2 go to the website of the manufacturer of the graphics card or your computer > Search a driver and Download Section > search your computer or your graphics card model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

  See you soon.

• compatibility with the computer monitor mac laptop

  I use a Mac Pro laptop with an external monitor to the HP 2511 x. It seems to be an incompatibility with these devices. When Mac wakes up from sleep mode, the HP monitor will respond only to turn on maybe 20% of the time to recognize the computer. 80% of the time that he can't find the computer and going to sleep. The only solution I have at the moment is to unplug the power cord at the back of the monitor and reinsert of maybe reset the monitor, at which time it will recognize the computer and everything works fine until next time. Any thoughts would be appreciated.

  Hello @rotarypilot,

  I understand that you are having trouble with your CV 2511 x external monitor is always recognized by your MAC laptop. I'm you provide a document from HP support: updated a monitor driver, who says.

  "The HP monitors are not supported in a Mac environment. However, recent Macs use graphics with VESA modes and can display most of the HP LCD monitors. To do this, connect the monitor to the Mac, while the Mac is turned off and then turn on Mac. The monitor must operate at 60 Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment. »

  Basically, any support you will get with a HP monitor on a MAC computer should come from Mac.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• COMPUTER MONITOR GO TO SLEEP WITHOUT INSTRUCTION TO DO SO.

  My computer screen goes to sleep without any provocation. It is a product of Hewlett-Packard. I have a new monitor and a new modem. This situation has occurred with the old monitor and modem as well. I entered "power options" and done and made the adjustments 'never' go to sleep. Always the screen goes black, beeps, then a message indicates that the monitor is going to sleep. How can I solve this problem? Maybe you can send me in another sense of what I've done so far. Thank you for your help.

  Sincerely,

  Vernon

  I DON'T KNOW RIGHT NOW, IF THE MONITOR HAS A WINDOWN SETTING OF ITS OWN, BUT NOW THAT YOU MENTION IT I'LL LOOK INTO THIS AS I GO DOWN ALONG THE ROAD TO THE ANSWER HERE. THANK YOU FOR YOR ENTRY.

  You can also see if the current graphics card has a sleep function monitor in his own control software.

  If this is to happen with other monitors as well, it is a very good possibility.

• Pixelated all the get computer monitor at random times

  Original title: help! Totally confused

  Recently, I started having a rather massive problem with my pc, I suspect that maybe that's a problem with the video card, but I'm not sure.
  Basically, my monitor goes nuts and becomes pixalated and messed up looking... sometimes I am forced shut downs or my computer just freeze.
  I can run in safe mode that sometimes will look normal and pixelated and other times will look foires.

  Here are some pictures of what I see:
  http://img848.imageshack.us/i/img20120117000240.jpg/
  http://img844.imageshack.us/i/img20120119022608.jpg/
  http://img837.imageshack.us/i/img20120119023255.jpg/
  http://img36.imageshack.us/i/img20120131010342.jpg/

  I am at a loss total-thanks for the help!

  Recently, I started having a rather massive problem with my pc, I suspect that maybe that's a problem with the video card, but I'm not sure.
  Basically, my monitor goes nuts and becomes pixalated and messed up looking... sometimes I am forced shut downs or my computer just freeze.
  I can run in safe mode that sometimes will look normal and pixelated and other times will look foires.

  Hello

  You might want to try the built-in utilities to isolate the problem.

  Open Control Panel / Troubleshooting.

  In the left menu, choose show all.

  Use the convenience of display quality, hardware and peripheralsand Performance .

  Using the troubleshooters, they can automatically fix some problems.

  Let us know the results.

  Concerning

• monitor HP w2072a out of range problem

  Hey, reader, I am using a hp w2072a monitor and it hooked to my ps3 to a hdmi to dvi cable, but when the 1080 p resolution on the w2072a it says out of range change affecting 1600 x 900 at 60 Hz and tried to change it but could not find in the main menu of the monitor please help thanks

  Hello

  To change the resolution to the ps3, not in the menu of the monitor.

  C.

• The computer monitor calibration

  Hi all

  
  Since then, I am now seriously Pre Pro and AE, I think its time to overcome the uncertainty about how to calibrate.   The only thing I have to judge the color of my work is my computer screens and television when I burn a DVD.

  So I am looking for any advice during calibration.  I use an Apple monitor and an old HP 72 monitor to my second screen.

  When show controls in system preferences, I was wondering does choose any particular resolution made for a display better or more accurate video on the monitor.

  My Systerm preferences color screen has 5 display profiles including the one I created with the calibration Assistant: (1) Cinema HD (which I created after you have used the wizard of Cailibrator);    (2) adobe RGB (1998).   (3) generic RGB profile;   (4) D8904CN21 HP (my second monitor); and (5) sRGB IEC61966 - 2.1

  Which one should I use?

  Thank you

  For video work, always leave the default sRGB. Everything else would be just tilt the color any more away. Yet, without a proper calibration device, which is going to be perfect, either. You screen brightness could be a basket case, could have set the color in 1 million other places on the monitor or the graphics card and so on... It really comes down to measure on your screens and create a color profile for them. So, if you are really interested, at least borrow a Spyder, EyeOne, Colormunki or similar to see, once how your screens should actually look like, when they are 'neutral '.

  Mylenium

• Paviollion HP HPE 112Y - no video SIgnal from the computer - monitor works

  I have a desktop HP Pavilion HPE 112Y.  About two weeks, the video has stopped working.  I replaced the HDMI cable, we replaced a VGA cable, etc with no luck.  I plugged in the screen of my laptop and it works fine, then it is certainly the office.  All I get is a message "No. Sigmal video»

  I tried to connect the monitor directly on the edge of VGA video connection - without going through the video card.  No luck.

  .  I can not get the system starts from the CMOS or restore screen.  Hard drive runs, but goes into the cycle of continuous type "whiring.

  System is about 2 years old, running Windows 7 64 bit.

  Help!

  Hello

  Try this procedrue:

  Disconnect the PC and open it. Clean all the dust. Carefully, remove and replace all the cables towards the mother board one at a time. Do the same for memory DIMM and the video and the sound of cards if you have a.  You can buy a can of compressed air to blow the dust out of the heatsink from the CPU.  Plug your PC back in and give it a go.

  If the above does not help this procedure: power.  Do not skip steps.

  Finally, try to clear the CMOS memory.

• HDMI displayport on computer monitor

  Is it possible to use the hdmi connector on a w2207h to a displayport on a cpu [via a displayport-hdmi adapter] rather than use the VGA port on the CPU as a computer display connection?

  Hello

  Yes, they are both digital use, no conversion is necessary.

  Kind regards.

• monitor color off after switching on computer monitors.

  White appears blue in a large number of programs (Photoshop, illustrator, etc) and it seems harder to read things on the monitor. Is there a way to configure the color on the monitor settings so that it works? I can't pass the monitors. It is a dell monitor that I use.

  Try 'right click' on a zone empty of your desktop and select properties and see if there is any option in there that can help you (or if you have a specific graphics card software) and sometimes the screen itself has a menu system and will allow you to modify the "temperature".

  I hope this helps.