Copy the data from USB key for comments

Similar Questions

• PowerVault MD1000: Attached directly slow to copy the data from storage.

  Hi all

  I have a powervault MD1000 attached to a PE2900 using scsi. When I write for the PV everything is ok, but when I want to read it, for example copying the data from it, he grinds the server stops and usually falls!

  can someone advice could be what the problem?

  
  

• Not able to copy the data on USB in WIndows 7 even with administrative rights

  I use Windows 7 64 bit and have administrator rights, I can copy data from USB but system is not allowing me to copy the data on USB. This has happened with me also, but since I change my laptop, this problem has been resolved.

  It happened suddenly, earlier, I managed to copy the data to USB abd take backup of my system, but now it is not possible. Please notify.
  You may need to take possession of your records - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

• Copy the data from CollaborateSync to the other pc

  Because Acrobat crashes sometimes, I would like to copy the data from CollaborateSync to a PC Backup. This means that I have shared a pdf with PC A one form I'd like to get answers on the PC B, too.

  I tried to copy the Synchronizer-folder "documents and settings" - folder but I can't get answers.

  What information should I copy can I geht PC B answers?

  Klaus

  Find the file "Workflows" in Acrobat under Documents and Settings folder. It is located inside the folder "Collab. If this file is missing, copy the folder "Synchronizer" will not do anything good.

  In addition, copy "Forms" folder as well.

• Copy the VM from USB for ESX 4.0?

  I have all the files that make up a virtual computer on an external drive (40 GB of data).  I need to get them on a new server ESX 4.0.  What is the fastest way to similest to do this?  Can I mount the service console USB drive and just copy the files?  Is there a conversion process that must work because they are 3.5 and I put them on a 4.0 Server?  Thank you.

  Means the faster is to log on to your workstation and use VMware Converter or Veeam FastSCP for ESX move data.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• I would like to know if we can copy the data from one scenario to another scenario for several years. See the example below

  For example, I would like to take our entry scenario Plan for FY16 and copy this data into our Long Range Planning scenario in the years 2016,2017,2018,2019,2020.

  So I know I can do this script calc to copy a year but what can do to copy several years if possible

  ESS_LOCALE English_UnitedStates.Latin1@Binary
  UPDATECALC OFF SET;
  SET CLEARUPDATESTATUS AFTER;
  
  Fix (& PlanYr)
  

  ClearData "LRP Input;

  DATACOPY "Entry Plan" to THE "LRP Input;
  "Entry plan";

  
  ENDFIX

  Yes--but with several instructions DATACOPY (one for each year of the 'target').

  You can always make your CLEARDATA in a FIX on every year, but then put the DATACOPYs after the ENDFIX.

• How to copy the data from Palm Desktop on a PC running Windows 8.1

  If like me you still find the Palm Desktop data (addresses, calendar, notes, etc.) handy and use it long after throwing the combined capacity and 'sync', you can see this is useful.  I bought a new PC running Windows 8.1 and had problems with data transfer due to a problem as I understand it, which does not exist in Windows XP, Vista or 7 versions.  Here is a summary of a way to easily transfer data from these earlier versions if you have a USB flash drive (or Dropbox, Google Drive, whatever) very convenient:

  (1) Download Palm Desktop 6.2 or 6.2.2 to your new PC.  Give a user name exactly as it exists in the database from your old PC.  This name will serve as Office Automation to create a folder name of six letters (an abbreviated version of your name) to hold the data that Palm Desktop will turn upward.  Wait a few seconds for this to happen, and then close the application on your new desktop.

  (2) in your old PC you want to transfer data from, find the folder named "Palm OS Desktop" which should exist in 'Documents' under path of folder and subfolders 'Users' as > your subfolder name > Documents in Windows 7 (can also be Vista) or may be under "Documents and Setting" folder in Windows XP.

  (3) in this folder "Palm OS Desktop" search this subfolder of six letters of your name and select this whole subfolder and select 'Copy' or Ctrl-C

  (4) locate the same name of subfolder in your new PC (which will have data zero), delete and then 'paste' the subfolder you "copied" in the exact same location.  If you did it right, Viola!  Your new desktop PC should display all the transferred data, once you open the application again.

  Most of the same procedure works with PC Windows 8.1 (probably also Windows 8).  What I found different is that the subfolder of data created under "Palm OS Desktop} had 7 instead of 6 characters with a"0"(zero), added as the last character.  When finally, you copy and paste this subfolder in the new PC there so rename and add "0" for the Palm Desktop to locate these data.

  I hope this helps.

  Data in XP is located in C:\Program Files\Palm (or PalmOne) \ < your HotSync name truncated > \Backup.

  HotSync for Win8 has been available for quite a while now!  See the post at the beginning of this section called "64-bit Windows USB drivers for Palm Desktop" for instructions and driver downloads.

  Palm Desktop 4.x and 6.2.2 use different database formats - 6.2.2 went to .mdb as an extension.

  Best way to migrate data is to perform a HotSync on the new machine, or use the built-in in Palm Desktop Export/Import option.  Export the addresses and calendar files, and then copy those of the new machine.

  The import option to retrieve data.

  WyreNut

• How to copy the data from the indicator table 1 d to the Clipboard

  Is it possible to copy data from table 1 d indicator to the Clipboard as a text and for more than one cell?

  I use LV8.6.

  Leszek

  Sorry, I wasn't sure if it was available in 8.6, apparently not.

  You could create an indicator of fine print and use 'picture to a worksheet string' to complete. Now, you can just cut & paste the text instead.

• Need to copy the data from my laptop to my flash drive

  : Original title: I'm blonde so someone could please help me but can explain in English :} thanks

  I need to know how to get the information from my laptop to my USB key or its data traveler called?   I have to get this figured out as soon as possible.

  Hello

  Assuming that you are referring to Kingston Data Travler see the following how to:

  http://www.Kingston.com/Flash/dt_ii.asp
  http://www.Kingston.com/support/
  http://www.Kingston.com/support/howtodt/default.asp

  Good luck

  Donald Anadell

• Devote any space to a USB ready Boost permanently would make it unnecessary to keep the data from USB?

  Can the boost loan process be rolled back so that I can still use my USB key to store data.

  Hello

  You can disable ReadyBoost for a storage device.

  I suggest you to refer to the links and check if it helps.

  ReadyBoost turn on or off for a storage device 

  ReadyBoost

  Let us know the results. We will be happy to help you.

• Copy the data from two rows together in a new line

  Hello everyone.

  I have a question for copying data from two lines together in a new third line.

  See this short example:

  This is the current situation. The lines STATE_1 and STATE_2 contain different information separate.

  In the past data were recorded at random in one of these lines.

  It's the state table:

  ID	Cust_id	STATE_1	STATE_2	STATE_3
  1	88	Customer is waiting.	Call since yesterday.
  2	11	Mr. Smith, no answer.	Wait until December
  3	11	Pls Create PO.	Old PO has been cancelled
  4	5	No access to the system.

  Now, everything must be recorded in the STATE_3 void, but I also need than the old entries from the past which must also be copied together in STATE_3

  Like this:

  ID	Cust_id	STATE_1	STATE_2	STATE_3
  1	88	Customer is waiting.	Call since yesterday.	Customer is waiting. Call since yesterday
  2	11	Mr. Smith, no answer.	Wait until December.	Mr. Smith, no answer. Wait until December.
  3	11	Pls Create PO.	Old PO has been cancelled.	Pls create in. old PO was canceled.
  4	5	No access to the system.		No access to the system.

  Y at - it an SQL-easy order?

  Thanks for any help.

  
  

  What:

  update set state_3 = state_1 State | » '|| state_2;

  ?

• Move the data from Palm Z22 for palm M125

  My Palm Z22 batteries do not hold a charge.  I recently bought a Palm M125, but have been unable to transfer data from the Z22, the M125.  My op system is Windows Vista Ultimate 32-bit Edition processor.  Is it possible to move the data?

  If the Z22 still works, the best way to transfer your data is for her beam to the M125.  At least, for the PIM of Palm of basic data (e.g., calendar, Contacts, memos, to-(tasks)).   On the Z22 in calendar, switch to the display of the day (not the order of the day).  In the menu, select the category of beam, choose the date range and select all from the drop-down list category.  Make sure that receiving IR is selected in the receiving device.  Align them face to face on one foot out and tap the beam.

  In Contacts, select the category in the upper right, then open the Menu and select the category of beam.  Same process for tasks and memos.

  Data and third-party applications might not let u their beam.   In addition, you will a newer device a lot older with an older operating system that may not work new apps.  So, after you transfer your PIM data, try beaming your third-party apps at a time to see if they run again.  The Z22 Launcher screen (at home), open the Menu, and then select the beam.  Highlight apps one at a time and try to beam at the M125.  My guess is that apps like Documents To Go might not even run, if they let u beam, because they were written for the newer versions of Palm OS than what works the M125.

  There is also an upgrade process where you can do this thru Palm Desktop when you switch devices.   But again because once you go towards the back to an older device, there are some compatibility issues with the applications, databases and files of the system, not to mention the questions according to what version you use Palm Desktop.

  Let us know if ensoupler works, or if you encounter any problems, in this case, we can go to the ugrade process.  Also, let us know what version of Palm Desktop you will synchronize with.

• copy the data from the columns box

  Hi all, I have multicolumn listbox and I deleted all the lines both vertical and horizontal lines and columns headers.when while, I run my vi, some string data are introduced into the list box. However when I try to copy a line of string in the drop-down list, I am unable to do (I can't select a line,... the idea is to select a row in the list box so that I can paste it somewhere else... That's how am supposed to allow some feature of the list box to be able to do this... any help? Thanks already

  Hello

  If I understand your problem, you want to copy the values of time and the description at once and paste the entire line in a txt for example, no? Unfortunately, the listbox is as an array of 2D channels and each field is a different value of this table 2D. You can copy a value at the time when the VI does not RUN otherwise you can use a property node to display the name of items and that the copy and paste values (always a time value) also using the VI.

  I hope the information is useful for your application

  Concerning

  Mario

• Copy the data from the selected record line

  Hello I use Oracle Forms Builder 10g.

  I want to copy a line from a record that populated the request but that the first lines can be copied when I click on it. I want to know how to copy the specific line-specific data when I click it. Thank you.

  

  using

  GO_RECORD(:SYSTEM.) MOUSE_RECORD);

  the current selected row updates as you click mouse a line. «: SYSTEM.» MOUSE_RECORD' gives you the line number of the recording, you click and it gives a value of '0' char if you click outside the record block.

• How to transfer data from USB key

  How to transfer data from the reader flash player (C), when you open send it to it does not have this option

  Drag & drop.