Copying data between members in essbase

Similar Questions

• Copy data between the custom dimension members or scenario

  Dear Experts,
  
  I'm back with my silly question.
  Is there anyone know how to copy all the data (not only entity currency) between members in the custom dimension? Our HFM application has a different type of data because the type declaration (legal and audit). Whenever we arrived with our legal data, we copy our legal consolidated data for verification. We tried to create a formula (using hs.exp) to move data from legal to check, but apparently, this formula should be write inside Sub calculate (). Is not supposed, we do not want to run the copy data every time that the user click on calculate.
  
  We also perform copy data between the scenario, as actual to Budget. This activity also needs all the data consolidated and final.
  
  So the condition for the copy of data are:
  -data must be consolidated
  -Copy all the data, including the adjustment
  
  Is there a formula or a way to copy the data that can be triggered individually (click 1 rules that run only copy data) by the user?
  
  Thank you very much for your kind response,
  -Anna

  Hi Anna,.
  As you say, you cannot trigger different parts of rules to run in HFM. Instead, you use a condition. In your case this condition might be guided by the management of the process. You can use a combination of GetSubmissionPhase, review status , and ReviewStatusUsingPhaseID functions that returns the current process management level and presentation details: phase. To me, it seems that as soon as you have finished legal, you complete a part of your process cycle and enter another stage of verification. Here are the parts of your publishing process, if you have defined a process in HFM management or not, which means that you should consider using it.

  -Kostas

• Copy data between the cubes

  I need to copy data between two cubes (using a business rule). I can do using Partition/replication? If so, anyone have an example on how it's done? I am currently using @XREF, but that does not transfer data for the blocks that do not already exist in the database target.
  
  I am very new to this so will get a detailed description.
  
  Thanks for your help.

  You cannot view a partition copy of a business rule. It is intended for the statements of calculation. I guess you could do a jexport or a dataexport and have a batch file that looks for the existence of the file and made a load of it. I don't know that it's a good solution, but if you need to execute a business rule, it might be a way. Of course, you could include the replication in the maxl scriot that is triggered by the creation of file.

• Identify the best way to transfer data between applications in Essbase

  Hello Experts,
  
  
  One of my clients uses Hyperion System 9.3.1 and they try to understand if the partitioning might be a way to automate the transfer of data between applications Essbase (using the partitioning of replication).
  
  The challenge, they say, is that they may need to send the budget a source application (SLVQ) data to an application (consolidated) target. Data can be changed in Conso and returned to the SLVQ for review.
  
  They get warnings when they define partitions in both directions because the partitions are overlapping, but it works.
  
  Are there concepts or reasons why they should not use this function (transfer in both directions)? Is this something that is used by other companies?
  
  Their alternative is to export data in text file, then reload with rule files. It seems more difficult to define (MaxL scripts-> text files-> rules of files) with more chances of getting errors. Is there some other effective solutions which we do not understand?
  
  Please suggest.
  
  Thanks in advance
  
  Kind regards
  Jingle

  Hi Lisa,
  other than the scores, text file
  There are two more, according to my knowledge

  1 XREF
  2 HAL (Hyperion Application Link) using adapters essbase

  We use the XREF and HAL to our company to transfer data between applications according to the needs.
  I hope this helps.

  Dornakal.
  www.dornakal.blogspot.com

• How can I move/copy data between desktop Vista user?

  Hello

  My home computer has 3 users, 2 personnel and an administrative one system.  [How] can I copy or move files between desktop ordinary user without login again as a system administrator? As a regular user, that I can't even see the jobs of the other user.

  Thank you.

  I think I've cracked it.  I had to abandon my personal account admin rights and of course a password to protect these rights.

• Can I copy data from a VBScript script points?

  Hello

  If I have a 2D - axis in VIEW space, I can copy the data points to a new channel by clicking on the button ' copy of flags Data Points: Is it possible to have the same features of a VBScript? I can set and remove the flags, but I can't find a way to copy these flags.

  This is the key what functionality I want to automate my script

  

  Thank you

  Lucas

  Hi Lucas,.

  Define DIAdem VBScript indicators used the command ChnFlagSet. But there is no command in VBS to remove or copy the part with indicator of the curve. So I suggest you use the position of the cursor and read the x value of him, after that, you can find the following value in the channel (use PNo). If you have a box and two coursor one left and right to read x 1 (left) and x 2 (right). With this coordinates use the DataBlCopy command to copy data between the coursors to a new channel.

  If it's difficult, you can also use CHF to search for what is the value of a channel is reported and copy it to a new channel. Doing this, you first need to flag values.

  For example in this topic, you can also watch "Automatic Anzeige harmonischer offer" in the Finder for example DIAdem

  I hope this helps.

  Concerning

  TomBaum

• What is the difference between EPMA and Essbase Studio

  If the two are not used to design applications?
  
  And a really need Essbase Studio?

  What is the difference between EPMA and Essbase Studio

  ^ ^ ^ It's a little confusing, isn't? As far as I understand the role of EPMA, it is a way to share dimensions and common data between several products Oracle EMP including Planning, Essbase and HFM. In fact, I don't know if other products live in EPMA. What is EPMA not have is a great way to supply or manipulate the dimension and fact tables (or files). Oh, there are tables of the interface, but you will write the code/use the utility of dimension EPMA to load dimensions. I must say that I never tried to load through EPMA data so that someone else will have to pronounce on it. Once the dimensions are built, you can deploy Essbase (and other products) of common and specific to the database dimensions.

  Studio is the tool you will use to go against a data warehouse, or something terribly close a data warehouse to build Essbase databases. Just for Essbase - HFM, planning, etc. are not the targets of the Studio release.

  What gets confusion / intriguing, is that when EPMA deploy Essbase apps, it uses Studio under the covers to do. So the interesting implementations where people use Studio (which is much more flexible than EPMA because it is a development tool as opposed to a dimension/data management application) to read the tables, EPMA interface (and as far as I know, the EPMA base tables) and create Essbase applications like that.

  If you think that there is overlap, I agree with you, but you can see that they are not the same.

  And a really need Essbase Studio?

  ^ ^ ^ Do not use Studio to build Essbase databases. You can go hog wild in EAS with loading SQL rules if you want, even if at some point it will be probably easier and simpler to build in the Studio. Although the Studio has been mentioned as the replacement of EAS for awhile, I suspect the effort required to build a database in Studio will keep around for quite a while EAS or Studio Lite will be out. There is a lot to say (sometimes) for the incredible flexibility EAS/Essbase-Studio requires a more methodical approach and EPMA has a very formal set of standards and methods.

  Phew, I'm sorry, I wrote a book on this subject and I bet you get a lot of differences of opinion on that.

  If you are interested in the Studio, you could do well to take a copy of 'Look smarter than you are with Oracle Essbase Studio 11' of Glenn Schwartzberg. I don't get a penny from the sale while I was among the writers of copy (Hey, I got a mention in the acknowledgements). It's a good book and an excellent introduction to the tool.

  Kind regards

  Cameron Lackpour

• IX4 - 300 d - cannot copy files between actions or the ext disk. USB

  Hi forum!

  I can't work for the life of me how to move files between the shares on the NAS. I can access my computer fine actions. I have a USB HARD drive connected to the front USB port and I want to copy some files from the HARD drive to a shared folder on the NAS, but when I'm in the content browser that I have no option to copy, and there is no functionality of drag - move. That I going nuts or something blatantly obvious lack?

  I want to copy data from USB directly as it is a few TB of data and copying on the LAN will take ages. It's going to be a regular thing, but I can't really put in place a copy job, because it is not the same type of data or file locations every time.

  Help, please!

  Thank you!

  Matt

  Hello MattDobson,

  You will need to map the actions:
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=how+to+map+a+network+sh...

  And move the data in this way, the Ext HDD will appear as its own share, but can be mapped as others.

  The content in the UI Viewer is not designed to move data.

  You can find documentation and downloads for the ix4 - 300 d here:
  https://Lenovo-na-en.custhelp.com/app/cust_alp/p/1189, 1193/session/L3RpbWUvMTQ0MDUyNTY3OS9zaWQvZWNDc...

  You can download the Storage Manager Lenovo via the link above, and which should help you to map actions.

• Sharing data between multiple while loops, competitor rates

  Hello

  I am trying to Exchange data between competitor while loops running at different speeds.  What is the recommended way to do this?    In practice, I have 12 indicators and 3 cards I would update (on screen) in the slower loop, although the data acquired and stored on disk in the fastest loop.  The image below is a simplified version of what really works my candidacy.

  I currently use local variables and shared to achieve this.  I heard however that local variables are evil because of their use of memory (data are copied instead of who passed by reference).

  Thanks for your suggestions,

  Adam

  

  Hi Adam,.

  Yes, here you go.

  Mike

• Copying files between hard drives problem

  Hello

  I have problems copying files between hard drives on my computer. I was having this problem on Windows 7 and Windows Vista, but never met him on XP.  It seems that there are several similar topics, but I think I've noticed a few oddities in my own experience...

  I have several drives, between 500 GB ~ 1 TB.  Problems arise when I try to copy a folder with a large number of files (pictures, records about 4 GB in size, typically).  Initially, the transfer rate would be HD burst speed, somewhere between 90 MB to 150 MB.  Speed would be reduced to about 30 MB, or even lower.  The transfer ends by becomes so slow that the operation would take hours to complete.  If I try to cancel, it would take minutes to do.  The computer run slowly for a long period of time, with an offset of intermittent until I have to reboot the system.  This occurs regardless the source and destination drives.

  On some Samsung drives, this problem is actually lead to the corruption of data on the source and destination drives and i/o error messages.  CHKDSK runs at startup, try to solve the problem, but the data would be lost or unreadable disc.  I have since thrown the Samsung WD drives, do not have IO error, but the file copy problem persists.  I also disabled chkdsk at startup for all readers.

  My drivers and Bios are up-to-date.  Computer is free of viruses and malware.  I have no more trouble with Windows 7.  Curiously, if I compress my folders/files in one RAR file, I have no problems copying (transfer rate remains stable at 30 ~ 50MB).  This leads me to believe that this is not a hardware problem, but a problem with the Explorer of solutions, and that respect more particularly with the number of files transferred rather than size.  (But unpacking these files also lead to poor performance sometimes...)

  Is this a known issue that will be corrected?  I really like Win7, but because I work with large number of files and many backups all the time, stability during the file copying is a must.  I have perhaps to go back to XP, or use another OS entirely...

  I had the same problem;

  My system-

  Windows 7 Pro 64
  Core i7 940
  7200 RPM dual 500 GB SATA
  Gigabit ethernet

  Gigabit ethernet switch
  Gigabit router

  Buffalo NAS 1 TB, RAID 0, Gigabit Ethernet

  -----

  I was getting speeds of transfer of a maximum of 500 / 600 KB/s between the hard drive and network storage drive. I went through a number of * fixed * on the web without success, however, I disabled "TCP AutoTuning" and "RSS" rebooted and voila, I now get speeds of transfer of 9-10 MB / s and from the network drive.

  The fix
  It should be noted that, in addition to this, I have updated to the latest updates for Windows and off the DRC in the Windows Options under programs/features.

  How to disable TCP AutoTuning and receive scalability side

  1. Open a prompt with administrator rights.
  2. Type the following commands, and press enter (the second command on RSS is optional):

     netsh interface tcp set global autotuninglevel = disabled
     netsh interface tcp set global rss = off

  3. Restart the computer.

  
  ----------------------------------

  website design agency wirral

• Find Dates between 2 dates

  Hi all

  I use SOASuite 11 g. Using XSLT, I want to find some dates between 2 dates

  For example, if I input 01-02-2016 and 2016-02-07

  
  

  The XSLT must return

  2016-02-01,.

  2016-02-02,.

  2016 02-03,

  2016 02-04,

  2016 02-05,

  2016 02-06,

  2016 02-07

  
  

  can someone suggest me how to build this logic in the xslt file?

  
  

  Thank you
  

  (1) fn:days - of-life feature gives you the difference in days between two dates.

  (2) use the value above in the foreach loop and then create a counter variable and map it to element position().

  (3) now use this counter variable in the Sub method within the loop for.

  xs:date(fromdate) + xs:dayTimeDuration(concat('P',$counter,'D'))

  (4) you can now print this value (or) copy it to a repetitive Xml structure element. When copying, you can use the $counter as an index for the repetitive element of the target.

  Now if you want including and to the dates too, then add 1 to the output in step 1 and step 3 use $counter - 1 in xs:dayTimeDuration.

  It will be useful.

• Can I set up custody of data between databases already available on two different servers?

  Hi, people

  Can I set up custody of data between databases already available on two different servers? If Yes please can you share the links.

  Host operating system: business Red hat Linux 6.5, 64-bit

  The two DB: Oracle 11.2.0.1

  Thank you

  But my question is that I have already two databases running on two different servers that have different data as well.

  In this case we can able to configuration data guard on these two databases.

  The answer may well be yes or no depending on what exactly you mean. Let me explain... Suppose that my Setup matches your description. I have two database servers, we will call them HOST01 and HOST02. HOST01, I have a database named ORCL1 and HOST02 I have a totally different database named ORCL2. Two databases... two hosts.

  Can I do ORCL2 a physical database ensures for ORCL1? The answer is no, I can't. I can't use another existing database to be one physical standby of another. ORCL2 must be destroyed and ORCL1 copied to HOST02 so that I have a database of duplicate.

  Can I use ORCL2 logical waiting for ORCL1? Yes. However, it would be a rare configuration.

  Can I copy ORCL1 to HOST02 and create a physical standby of ORCL1 on HOST02? And then can copy ORCL2 to HOST01 and HOST01 to provide a physical standby for ORCL2? The answer to both is Yes. You can have the other provide a standby for the guests of the database have sufficient resources to support the primary one and the expectation of the other.

  HTH,

  Brian

• Copy data based on IF

  Hi, I need to copy specific data to a dimension (State - Sparse) where all the data is loaded to a member of the "No_status" and must be moved to other members in the dimension of status based on an account «LFL_Flag"placed on the shops and «No_Status»

  The script below works, but I think that there must be a way to make it run faster? He currently runs 17 min for a period of time (months). Account and the period is Dense.

  DIFFICULTY (LCY,@LEVMBRS (store, 0), FY14, Oct, real)

  'stat again '.

  (IF ("LFL Flag"-> "No_Entity"->"cp. No "->"stat. No_Status "== 0)

  "stat. No_Status;

  ON THE OTHER

  #missing;

  ENDIF ;);

  'stat existing '.

  (IF ("LFL Flag"-> "No_Entity"->"cp. No "->"stat. No_Status "== 1)

  "stat. No_Status;

  ON THE OTHER

  #missing;

  ENDIF ;);

  'stat LFL '.

  (IF ("LFL Flag"-> "No_Entity"->"cp. No "->"stat. No_Status "== 2)

  "stat. No_Status;

  ON THE OTHER

  #missing;

  ENDIF ;);

  'stat Changed_Start '.

  (IF ("LFL Flag"-> "No_Entity"-> "cp. No "->"stat. No_Status "is 3)

  "stat. No_Status;

  ON THE OTHER

  #missing;

  ENDIF ;);

  'stat HQ '.

  (IF ("LFL Flag"-> "No_Entity"-> "cp. No "->"stat. No_Status "is 4)

  "stat. No_Status;

  ON THE OTHER

  #missing;

  ENDIF ;);

  ENDFIX

  Any suggestions?

  THX

  Simon

  Hi Simon,.

  Each of these blocks of Member is a pass through the database, so I'd make them all in a single block.  You can open a block from Member to Member and then use it to assign values to the members A, B and C.  For example:

  'stat again '.

  (IF ("LFL flag"-> "No_Entity"-> "cp. None "->" stat. No_Status "== 0)

  "stat. new" = "stat. No_Status;

  ELSEIF ("flag LFL"-> "No_Entity"-> "cp. None "->" stat. No_Status "== 1)

  "stat. existing" = "stat. No_Status;

  ELSEIF ("flag LFL"-> "No_Entity"-> "cp. None "->" stat. No_Status "== 2)

  'stat. LFL' = 'stat. No_Status;

  ELSEIF ("LFL flag"-> "No_Entity"->"cp." "") None "->" stat. No_Status "is 3)

  "stat. Changed_Start" = "stat. No_Status;

  ELSEIF ("LFL flag"-> "No_Entity"->"cp." "") None "->" stat. No_Status "is 4)

  "stat. HQ" = "stat. No_Status;

  ENDIF ;);

  If there is existing data for members, you may need to change this option to #Missing.

  I have not tested this code-it's just to show the concept.

• Record vm of copy-DatastoreItem between virtual centres model

  How can I use the datastoreitem copy to copy a folder of models a vcenter to vcenter another vm?

  Hello, tdubb123-

  I think that you will need to make a copy in two steps to achieve this:

  Copie-DatastoreItem 0) to a staging location (say, local file system running PowerCLI)

  (1) an another copy DatastoreItem call to copy from the intermediate location in the destination data store in the destination vCenter

  "' You can get the vCenters data warehouses the different browsing the PSDrive" vmstores------:  So, you copieriez to vmstores:\sourceVCenter\someCluster\datastore0\ to d:\temp\, then d:\temp\ to vmstores:\destVCenter\someOtherCluster\otherDatastore\, for example.

  It seems that you can not copy directly between vCenters with this cmdlet.  Trying to do so returns the error, "copy-DatastoreItem: impossible to copy data store objects in a store of data managed by another VC Server»

  What the round point road, however?

• Copy data from one schema to another. Reopen the Question

  Hello
  
  I had asked this question earlier to copy data from tables of one schema to another in the same database using the database link. In my previous post have mentioned below.
  

  Re: copy data from one schema to another.

  Now I am faced with the question for the remote copy of database
  
  I have created a DB connection between my local system and the remote database. with the chain of connection as shown below
  

  CREATE THE DATABASE PUBLIC LINK "MERU_DEV_LOCAL_DEV".
  CONNECT TO MERUDEV IDENTIFIED BY MERUDEV WITH THE HELP OF "MERUPROD";

  In the above script
  

  LOCAL DEVELOPMENT scheme IS
  REMOTE schema is MERUDEV

  I try to copy remote database to my local database tables using the script below.
  

  network_link DEVELOPMENT impdp = schema MERU_DEV_LOCAL_DEV = MERUDEV remap_schema = MERUDEV:DEVELOPMENT TABLE_EXISTS_ACTION = REPLACE

  But the copy of the table does not occur. What could be the problem? Please suggest me or do I need to modify the script
  
  Thank you
  Sudhir

  You can:
  -monitor the BONE with ps - ef
  -monitor data pump: jobs are dba_datapump_jobs and dba_datapump_sessions
  -monitor with logops: v$ session_longops