Corporate user - shared Services - planning accounts

Similar Questions

• How to synchronize user for Shared Services planning

  Hi all
  
  Please can someone guide me how to synchronize users for the SSP planning. I use the MSAD authentication.
  
  Thank you

  If they can't log into planning then it would point to a configuration problem, you shouldn't need to do anything after provisoning them in shared services.
  Are you sure they were definitely provisoned correctly.

  If a migration that happened recently and users cannot connect, then it is running the updateusers utility.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Essbase crash due to not being in sync with Shared Services / planning

  11.1.1.3 Essbase/Planning of assistance. An application with a database.
  
  I had problems with security filters (my users could see things they weren't supposed to etc.) So I went and played around with the filter of Essbase just to test out scenarios.
  
  That seemed to fix my mistakes that I saw in EN but... when I restarted the server. Essbase won't start and says that he is out of sync with Shared Services and hangs at about 20 to 30 seconds after starting. I right click on "Synch with Shared Services" do not know if I did it before or after having do the change with Essbase filters and obviously before I rebooted the server.
  
  Now I'm stuck. Essbase does not start, I'm a fish out of water. Any suggestion on reset this if at least I can "deploy" planning and push back as it was. y at - it sort of reboot "safe mode". I have to do something in Shared Services?
  
  I read a bunch of discussions on changing the security filters to for things like metaread etc. Never thought that I could cause crash the system with these types of changes.
  
  The error I get
  
  [Sea March 10, 14:17:32 2010] Local/ESSBASE0 / / / Error (1051518)
  
  Essbase global application does not exist in the Shared Services
  
  Published by: user11903659 on March 10, 2010 11:34

  Do not move to another environment essbase.sec.
  I suggest to try get a previous day backup of essbase.sec, ensure essbase is stopped then replace it and launch.
  I cannot say that definitely will fix the problem, but it is really worth trying.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Not available in Shared Services planning

  Hello
  
  I am trying to reinstall a complete platform of Essbase (workspace of the Foundation, Shared services, Essbase and planning everything in version 11.1.1.3). I only have the documentation carried out by the person who installs the platform.
  
  Nevertheless, I have a missing point planning.
  
  The installation process has ended successfully, but when I try to create an application of planning (after creating the data source), planning is not available in the list of projects of shared services.
  
  And, it could be linked, planning is not available in the workspace (wheel > Applications > empty | refresh)
  
  I'm not very familiar with the planning, so I don't know where to look to fix this problem. (I guess I am missing a step in the creation of the Planning Application)
  
  
  Thanks in advance for any help you can provide!

  Planning does not automatically exist in Shared Services, you must go in shared services and create it manually, once it has been created, you will be able to take when you create an application.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Limit available to the user - shared Service 11.1.2.1

  Hello
  
  I work currently at the EMP 11.1.2.1 use client-side. They have a simple question that I can't answer right now:
  
  MSAD (Microsoft Active Directory) is used by this client in addition to native Directory. When we do the requirement, we agreed that the user would be less than 50.
  The question is, how do I know if the Service shares to limit the provision of Active Directory user, say that only 50 users under AD may be put into service. User no. 51 can be provisioned or admin will receive notification.
  
  Is it possible or not? I'm very new to Hyperion, please help. Thank you.

  True, but that does not prevent new users to be put into service. So if a new user is added that matches the filter LDAP (i.e. added to a group or CN) so that the user can be configured.

  Pablo

• Backup shared services

  Hello
  
  I need to take backup of the shared services; my users are outsourced (MSAD, native)
  
  (1) should I use backup.bat (located in hyperion\SharedServices\9.3.1\server\scripts)
  (2) and the pattern of shared services (export).
  (3) will it be enough or I need to use cssexport.bat (although this backup for server similar to restore if needed)
  
  Version 9.3.1
  Oracle db
  modules, shared services, planning, essbase, EN
  
  I think that the step 1 and 2.
  should I skip step 3 or desirable.

  No, you should be fine if it's just shared services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Migration of LCM - Instance name?  Shared services project name? Data source?

  --------------------------------------------------------------------------------
  Situation
  --------------------------------------------------------------------------------
  * We have hyperion 11.1.1.3.24
  * Objective - trying to migrate files LCM of our DEV to UAT environment
  * DEV LDCS alone has enabled planning application ("budget"), little EN reports & other related artifacts.
  
  
  --------------------------------------------------------------------------------
  Up to now
  --------------------------------------------------------------------------------
  * Successfully exported these 4 (EPMA, shared services, planning & EN) of our DEV
  * When you try to import EPMA in our UAT, noticed that the State indicates failure. (Notice how claims have been reported in other posts as well.)
  
  Another dilemma that I have what should I write on the name of the Instance, the name of the Shared services project & the data source.
  
  * Instance name = >? I'm not sure. How to find it?
  * Shared services project = > have not created one at all. Thus, those who do I use OR how do I know this?
  * Data Source = > I guess, it would be the name of EPMA repository database?
  
  
  Although I can migrate all the artifacts in our (the same as our DEV) UAT, Migration status showed as "failed". Is this due to the fact that I jumped Destination options with empty values (for example, shared services and data source). Has anyone ever had success on this stage of the Migration.
  
  OR should I simply ignore this state of migration, because we can see all of the identical artifacts in our UAT.
  
  
  Any help would be greatly appreciated.

  If you connect EPMA and choose an application and select deploy (don't worry, you don't have to deploy, you can cancel it until you do).
  It displays a popup that will be the
  Name of the instance (usually the default), Shared Services project (drop-down menu displays the groups of different applications available), the Data Source (this is the name you gave when you created the source of application data)

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Users that are not not in Shared Services

  I created a Hyperion Planning 11.1.1, application commissioning has been done perfectly, while providing access via "* access control report *" I couldn't pick any user, including native users as "admin", none of the users are in the field available users or groups. "
  
  Configured applications of Hyperion which: Essbase, Planning, Shared Services and space to work with SQL server 2000.
  
  Please suggest. Thanks in advance.

  Hello

  First of the security warning means that all dimensions standards need to access permissions applicable to them (account, entity, scenario, version)
  Also administrator doesn't have the same constraints on access permissions, which means that you do not need configure the security of the members to the admin user

  If you directly connect to shared services (http://: 28080/interop/index.jsp)
  Expand user directories > native Directory > users > New > annotates
  Right click on the new user and available, give the user one of the planning no administrator roles, I would say that the role of Planner.

  Now you connect in planning and try and assign permissions member access, you should be able to assign permissions to the new user.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to connect to my user profile account if I typed my password and it says "service user profile Service does not log, failed to load the user profile?

  Can someone please help soon, I have to finish a project that I can't do without my files. I tried several times to log in to my user account, but it keeps showing an error message. I typed my password and the message is "service user profile Service has no logon. User profile cannot be loaded. I tried to restart my computer, the file sharing with another person on this computer to try to access my files, but nothing seemed to work. It just happened all of a sudden, yesterday I was on the computer and turn off the computer for the first time in a while. Before as I would just close the laptop, so I would not waste time log. But today I tried to open a session and received an error message and I can't connect to my user profile. Help, please!

  Hello

  ·         You did recently changes to your configuration?

  Try to follow this link: http://support.microsoft.com/kb/947215

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• Planning application no no projection in Shared Services 11

  11.1.2.3 version

  Last week our planning database got corrupted, do not know how, but it happened.  I went through the steps to recreate and restore the data, however, there is a small problem.  The application is now not showing in Shared Services, therefore, that I can't access SmartView.  Here is what happened.

  1. because I'm a nervous nelly, I first renamed 'PLAN' "PLAN1" via EAS

  2. I then selected "Create Database" planning and had no problems, a new Essbase application and databases have been created.  The new application called 'PLAN' as expected

  3 al ' Shared services, now, what emerges are two applications "PLAN1" which is clearly a single essbase application and "PLAN1" which is a planning application.

  I can select plane1 as the planning application and can get security charge very well, however, in SmartView, users cannot connect.

  How the world make it only show 'PLAN' and get rid of the old "PLAN1" applications.

  Thank you!

  Finally, I felt comfortable enough to register the application with Shared Services.  A few seconds, the problem was solved!

• Change password for the DN of the user: (MSAD config) Shared Services

  We have the MSAD service account to configure shared with MSAD services. E.M.P. version 11.1.2.3

  As a policy, we change the password for this account. Since we do not have shared services link works in this version.

  Will work the steps below?

  1. modify the password for the service account in MSAD

  2. connect to the workspace with other admin MSAD (my user id) id

  3. change the password for Shared services configuration MSAD, under "set up user directories.

  If this approach does not work, is there another way to do this?

  One solution is to change the workspace-> administer-> workspace server

  settings-> "allow direct connection after the failure of the SINGLE sign-on:" = Yes

  This will allow you to connect without SSO assuming that there are problems with the SSO.

  (assuming you can change pw back so you can connect to the workspace).

• Shared Service user provisioning end table back details

  Hello

  I have a client's requirement for Hyperion Audit and reports provisioning of users with date for internal audit purposes.

  I could get details of the checking table HSP_AUDIT_RECORDS. But I am unable to find the user details with effective date of commissioning.

  In what table I can find the details of the management of activities of users using the shared Service Console.

  Thanks in advance

  Kind regards

  Sunil.

  In planning for the HSP_OBJECT held the name and the HSP_USERS table for the users of MSAD held the MSAD objectguid, it stores no more information than that which is held in the ad

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• How to create users in bulk in Hpyerion Shared Services Console

  Hi all

  I need to create users in bulk in the Shared Services Console. Since I have many users, so I don't want to use Front End. Instead, I prefer to download a CSV of things sort.

  For this I export the console shared services and open the file Users.csv.

  Now my plan is to add all my users here and then going to import this backup of the Shared Services Console.

  The only point where I am confused is that how should I indicate the passwords encrypted in the file Users.csv and also what should I write in the column "internal_id."

  If you use LCM and native users then you should be able to enter a uncrypted password and when it is imported, it must be encrypted.

  Leave empty internal id column for new users, by creating a new test user.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Security planning vs Essbase in Shared Services (v.11.1.2.2 and v.11.1.2.3)

  
  Hello. Is it possible in v.11.1.2.3 or v.11.1.2.2 planning to restrict access through shared Services so that a user is forced to access data through a form of planning Planning Excel Smartview and that the user cannot directly access the Essbase cube and run ad-hoc queries? We try to apply data and governance processes so that users must perform their updates and queries via the planning of forms in SmartView calc Manager rules are executed, etc.

  Thank you!

  You need to remove the access Essbase writable & rights special user for these users.