correctly when reading the negative value

Similar Questions

• Read the output values after each step runs in the User Interface of LabVIEW

  Hi all

  Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1

  Problem: is there a way to run the following steps programmatically and get values out of each of them?

  I have already extended a bit a complete interface IO for TestStand load any sequence, choose among the measures and execute step by step (something as an alternative to the steps run selected). What I'm trying to do is to add some actions between each step and do in the UI (I can't change the sequence!), so I start the NewExecution with some previously configured InteractiveArgsParam and option breakAtFirstStep set to true. Eventually I do just something like step over when debugging the sequence and it works well, but I didn't do well a way yet to read the output values of the place...

  So, if I wait before the end of the run I can read my results by treating the ResultObject, but it works only after the completion of the test sequence. Because I wanted to stop after each step, read the values, do some actions and continue to the next step, I've tried to register a running Trace event reminder View Manager. I see that after each step is executed, this event is fired, but when I try to read that a ResultObject returned in the event data it is not filled with values (ResultList seems to be empty?). Is this a correct behavior or maybe I'm reading the wrong way? (It's the same VI regarding the reading of the ResultObjects after the sequence ends and there it works very well for tables, containers and other types of data).

  As I mentioned I can't change Test sequences, I can not add a UImessages.

  What are my options? If the trace event returns output all the values from each steps or is it just used to check the status? Or maybe there's a completely different approach to this issue?

  Thanks in advance for your suggestions,

  Best regards.

  When you manipulate the UIMessage trace (you need this before the return of the event or you will present the race conditions), download myuimessage. Thread. Then call Thread.GetSequenceContext (0, & Iplease).

  And then on the context of the sequence, either go to PreviousStep.Result if it exists, or watch Locals.ResultList.

  Trace events occur between the steps executed step the more recently is the previous step, but it is also a trace event to the beginning before any measure have run at this time, there will be a previous step.

  Hope this helps,

  -Doug

• Active Services Web Directory has encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance

  VCenter Server 4.1, I installed it on a physical machine. This is the error message that appears whenever I try to follow what is happening every 1 min event viewer.

  Error:

  role for users: log name: Active Directory Web Services

  Source: ADWS

  Date: 2010-07-28 15:55:21

  Event ID: 1209

  Task category: Instance ADWS events

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: wwubmw.williamwoods.local

  Description:

  Services Web Active Directory encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance.  Services Web Active Directory will try again this operation regularly.  At the same time, this body will be ignored.

  Instance name: ADAM_VMwareVCMSDS

  The event XML:

  The OS is Windows 2008 R2. What should I do to solve the problem.

  Thanks for the reference Troy

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Gregg Robertson, VCP3, 4, MCSE, MCSA, MCTS, MCITP

• Read the last value of a large file of PDM

  Hello everyone!

  I hope someone can help out me with this one.

  I try to put in place a program that can read the last value of one of the large channels of different TDMS files but I just can´t find a way to do it.

  I would appreciate help for my little problem.

  Thank you very much in advance for your support.

  Kasim.

  Hello

  You can use the following playback TDMS Set Position feature included in the PDM API.  This function receives a parameter called "(0:start)", which can be set to 1 to go to end of the file.  In this way, you can read the last value written to the PDM file.

  I hope this helps!

  Anuar Rojas

• DRAC5 "Error when reading the SSL socket connection"?

  Hello

  I have a BIOS of PowerEdge 1950 2.7.0 with DRAC 5 Firmware Version 1.65 (12.08.16).

  When you try to connect to 'Console' I get the error "Error when reading the SSL socket connection".

  I spoke the line "# jdk.tls.disabledAlgorithms = SSLv3, RC4, MD5withRSA, DH keySize.< 768"="" at java.security="" file="" but="" still="" the="">

  I use WIndows 10 with the latest FireFox.

  Thanks in advance,

  Asaf

  I found that these changes were necessary to connect to the DRAC 5 using Chrome and Java 8, rev card. 91:

  In Control Panel > Java > Security:

  1. check "Enable content of java in the browser.

  2. set the security level to "High".

  3. Add each DRAC IP to the list of exceptions

  In C:\Program Files (x86)\Java\jre1.8.0_91\lib\security\java.security):

  Remove MD5:

  jdk.certpath.disabledAlgorithms=MD2, RSA keySize < 1024
  

  Remove SSLv3, RC4 and MD5withRSA:

  jdk.tls.disabledAlgorithms=DH keySize < 768
  

• I can't get my LR to open without this message: "Lightroom has encountered an error when reading the preview cache and need to quit."

  Lightroom has encountered an error when reading the preview cache and needs to stop smoking.  Help, please

  Hi crystalc,

  It seems that the preview cache has become corrupted.

  You must go to the location where your catalog is stored via finder/File Explorer and get rid of the file ending with Previews.lrdata (not .lrcat)

  Default location of the catalog is under Pictures\Lightroom

• Trying to open the message box appears 'lightroom has encountered an error when reading the preview cache and needs to stop smoking' Lightroom "Lightroom will try to solve this problem, the next time that it launches" OK when you press closed Lightroom an

  Trying to open 5 Lightroom, a message appears 'Lightroom has encountered an error when reading the preview cache and needs to quit' "Lightroom will attempt to solve this problem, the next time he throws" when OK key Lightroom quit unexpectedly and the computer returns to the office.  This persisted for 2 days and it has not set itself.  help please.

  Click OK close Lightroom.

  You must manually go to the location of your Lightroom by Finder catalogue / file Explorer and get rid of the Previews.lrdata folder

  By default, the location would be in Pictures\Lightroom folder

• I get a message saying Lightroom met an erorr when reading the preview cache and need to stop smoking. Then told that Lightroom will try to resolve thei problem the next time it starts. Never does. Tried to uninstall and reinstall but no good.

  I get a message saying Lightroom met an erorr when reading the preview cache and need to stop smoking. Then told that Lightroom will try to solve the problem the next time it starts. Never tried to uninstall and reinstall but no good.

  Sound familiar to anyone?

  Hello

  Please go to the save location of the Lightroom Catalog and here please delete the Lightroom Catalog Previews.lrdata folder.

  Now please open Lightroom and check if it works.

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal

• Lightroom has to close immediately after splash because it encountered an error when reading the preview cache

  does anyone have a solution to this problem?

  Lightroom has to close immediately after splash because it encountered an error when reading the preview cache

  Frustrated

  You must remove this file previews.lrdata. It won't do any harm, and it does not solve the problem.

• At the launch of lightroom a message saying: Lightroom has encountered an error when reading the preview cache and need to stop smoking.

  Lightroom has encountered an error when reading the preview cache and needs to stop smoking.

  What can I do to make this work?

  

  Restart Lightroom

• Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

  Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

  There are dozens of discussions in this forum that describe the fix

• Checking the negative value

  Hey guys I have a result on the ground which is of type varchar, but it stores numbers. I want to check if the value is negative or not. The code below works perfectly except for 1 case where the result has only ' - '. -indicates a missing value not a negative... How this can be fixed. Here is my code snippet.
  -Search for numeric values
  IF (trim (TRANSLATE (resvalue,'+ -. 0123456789', ' ')) IS NULL) THEN
  -Look for the negative value if the value is numeric
  IF (substr (resvalue, 1, 1) = '-' AND substr (resvalue, 0, 1) is not null) THEN
  v_ret_msg: = v_result_name | "" A negative result. "

  Also check the LENGTH of resvalue.
  That is to say:
  If length (resvalue) = 1 and substr (resvalue, 1, 1) = '-' then...

• Error: "LR has encountered an error when reading the preview cache and need to quit."

  Trying to open it, a message "LR has encountered an error when reading the preview cache and needs to stop smoking. LR will attempt to fix the next time it starts. "apppears and it stops. Tried many launches and the same error appears. Help!

  Post edited by: Brett N

  OK, go to the Lightroom folder (in images by default) and delete the folder/file ending with the extension.lrdata. Previews have somehow become corrupt.

• LR has encountered an error when reading the preview cache and needs to stop smoking.

  I have the trial version of Lightroom 30 days.  I was able to use it for a week, but the last weeks of 1,5 to 2, it was locked up and that gives this error message.  How to solve the problem?  And how to reset the free 30 day trial?  I wish I had the time using the product before deciding on the annual contract.

  "LR has encountered an error when reading the preview cache and needs to stop smoking.  Lightroom will attempt to solve this problem, the next time it starts. »

  Thank you.

  Delete the cache of the overview of the Lightroom folder in your pictures folder if you used the default location. It has the extension .lrdata.

  You cannot reset the trial period.

• validation to regret the negative values...

  I have a class called "P14_No_of_days"...
  
  In this field the negative value should not accept that any validation is there?
  
  pls help me guys

  SKUD,

  Put code next under Edit Item-> HTML Form Element section "attributes".

  onkeyup='this.value=this.value.replace(/[^0-9]/g, "");'
  

  It will limit users to enter non-numeric characters.

  Kind regards
  Hari