Corrupted user login

Similar Questions

• Trying to fix a corrupted user profile problem files copy to new profile

  I'm fixing a corrupt user profile. I followed the instructions, the files were again copy profile and are almost finished.

  Progress bar went from green to red and does not seem to continue to copy. The icon in the upper right corner continues to run. Should I continue to wait? For more than 30 minutes.

  Hi suzy 59,.
   
  Log off or restart your computer and you login as the new user and check if all files have been copied.
  Difficulty of a corrupted user profile

• Preparation of desktop + default user login

  Occasionally, when I start my laptop Windows 7 Ultimate, instead of the 'Welcome' screen and a login prompt for the user by default ('B'), I get "Readiness Office", then the login for the user by default ('B') prompt. After a successful login, I get a new office and default user privileges 'B '. No files or other inerference profile to the default user 'B' will appear. To fix this, I restart or shutdown. Then start up, usually, I welcome and one for the default user login screen. After login, I have all the stuff for the user 'B '. It happens randomly without error message to the previous closure or the new connection. Any ideas?

  Hi BobThurmond,

  Method 1: First of all, you should try to check and safe mode if the problem persists.
   
  Follow this link provided below to start your computer in safe mode.
   
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Method 2: If the problem does not happen, I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  In addition, You can also use Event Viewer to search for information on the problem.

  Here is an article on how to do it:

  The display of the error messages in the event viewer
  http://support.Microsoft.com/kb/947321

  You can see for more information on the issue at the time where it occurred.

  You can post this information here to help us narrow down where the focus.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Corrupt user account

  My mac pro with OSX 10.8 book has a corrupted user account.  When I connect my normal user account it opens but I get the spinning ball.  If I connect to another user accout, fine.

  All the patches?

  Thank you

  How to create a new account if you can not access your Admin account

  Restart the computer. On the ringtone, press and hold down the keys command + S to start in single user Mode. You start on a black screen with white text scrolling, release the keys and wait that it ends.

  Enter the following lines at the command prompt, and then press RETURN after each:

  Mount - uw /.

  RM /var/db/.applesetupdone

  reset

  Once you restart the computer, you will be taken to the installation wizard. When you get to the point where you are prompted to set up your new user account, create a new admin account. Don't forget to name this thing another user account as the account user to administrator which already exists on the system. When you have finished the installation wizard, it will automatically save you in the new account.

  You can transfer your files from the old account to the new. See: transfer of files from one user to another account. Once you have moved all your files in your new account, you can remove the old account using the preferences accounts or users and groups.

  [Authorization to use the foregoing has been granted by khati.]

• Pavilion p7-1235: failed to get comp boot - Windows startup, but no HP user login page

  Please read this:

  I was on Google image search and typed in a key phrase to find images.  I decided to change the sentence by moving words.  Highlighted the first two words and I wanted to drag until the end of the sentence.  When I tried, I got a message saying enter now image and image search.  It was weird.  Never seen that before.  I wasn't looking for a real image using a picture, I was just looking for pictures of architecual using key phrases.  So, I hit ESC to clear the highlight and tried typing in the search box, but it wouldn't take any changes.  I closed my browser and moved.  Started a video and the video was stuttering as he played.  Tried again and it's the same thing.  Decided he must be still stuck on the image search so I closed everything, ran a quick system if the scan and then let it stop automatically at the end of the analysis.

  A few minutes later I came back to the computer and started it.  He went to the blue screen of the HP with the hand and the flight of image files. Below it read "Press esc for boot menu."  From there, he went to a black screen and the following messages:

  Check cable connections!

  &

  Error: No boot disk was detected or the drive failed.

  I tried a few different options then found my USB stick recovery I did the day I bought the computer.  That put according to the explanations provided here in the support forums.  This time, on the next startup attempt, he showed the foreclosure "loading files" and then goes to "start windows" - it appeared that everything was fine, but it wasn't. The color Windows icons do their thing and below, he reads from windows... And then nothing.  It just sits there with the Microsoft image on the screen.  Then, this password start windows on the blue HP screen screen... Then it stops on its own and restarts the same exact process: "loading files" > starting windows > blue screen HP > restarts... Repeats.  Sometimes to where it should be, but then it looks like it not connect further.  No of HP user login screen.

  In addition, I was never able to get the HP Recovery Manager window appears.  In fact, no HP can't at all (with the exception of blue screens such as mentioned previously).  In the past, once, when I had an error in startup (for more than one year), F11 brought by the HP Recovery Manager and I could simply restart the computer from a previous restore point... In this case, he never came to the top.  I'm not a tech guy but it feels like the side system HP isn't here.

  Any help would be greatly appreciated... I'm dead in the water at the moment...

  You can try to plug the data cable into a different SATA connector on your motherboard to rule out a problem with the connector itself.

  You can test your hard drive:

  Screening of hardware failures

  If your hard drive is mechanically dead then your data it lost unless you already have saved or pay an expensive data recovery service.

  If only the operating system or a file on the disk is damaged, then you probably can data recovery by plugging the hard drive to another pc as a player sencondary to access the files.

  You can recover your system on a drive hard new with your recovery disk USB by following the instructions here. See the section: boot from USB Recovery Drive

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.

  If my answer has solved your problem please mark as the "acceptable Solution". Thank you!

• Windows startup / corrupt user profile

  At the start, I'm 'connected with a temporary profile' and "cannot access my files." How can I get rid of this TEMPORARY PROFILE and get back to my normal Windows startup? If I press ESC or press F8 at startup the problem is SOMETIMES avoided but the TI emerges the next time I log on.

  I've updated the BIOS, cleaned the Hard Drive.etc.

  When I use tips IE for FIXING DAMAGED USER PROFILE, after creating a NEW ACCOUNT USER and opening DOCUMENTS, I can't find TOOLS (pressing ALT does not help) so am unable to continue.

  Any suggestions?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.

  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have visited
  logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Corrupted user profile

  My user profile may be corrupted on a base exchange network.  If you are using IE8 under my connection, meet various picture errors with IE8.  When you sign in with another account on the same computer, IE8 works ok.   How to fix my user profile - is there a tool to diagnose and solve problems?  Computer is running XP - Pro SP3 and all updates to Windows XP and IE8 are up-to-date.  Have you tried the Microsoft Fix It tool, has not fixed anything whatsoever.

  Thank you

  Information is available on how to fix a corrupted profile, but they are all basically the same procedure has already told you your network Support Technician.

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  ""Windows cannot load your profile because it may be corrupted"error message when you try to log on Windows XP.
    <>http://support.Microsoft.com/kb/318011 >

  I would add that corrupt profiles are almost always accompanied, if not caused, the corruption of system files.  As such, you must perform an operation of check disk (chkdsk) with the option to repair no matter how or if recover you.  If you really feel lucky, a chkdsk operation sometimes will fix a corrupted user profile.

  "How to perform the disk error checking in Windows XP"
    <>http://support.Microsoft.com/kb/315265 >

  I will warn you that the chkdsk will take place at the next startup, that it runs before Windows load fully, can only be interrupted and can take more than a few hours to complete.  It has also been known for discs of trash occasionally so it is prudent to update your backups before making.

  HTH,
  JW

• I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?

  Corrupted user profile

  I have a corrupt user profile.  Windows XP. When I add a new can be the same, or should be different.  And the user's profile should match the user ID?

  If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  Otherwise, you will need to create another user and copy your data.  The simplest procedure is here:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• Restoration to a corrupt user or copy corrupted to a newly created user. I am not allowed access to corrupt the user of another administrative user.

  When I try to copy the files from the user to a new user, the corrupt user is inaccesable when I click it.  I'm another user of the admin access.  I restarted the computer.  Does anyone have any suggestions?

  I encountered this problem immediately after removing an accessory program Apple ITunes that I have not used.  I did it to clear up disk space.  This has happened also when I got a low disk space to open the user.  I could open another admin user account and free up enough disk space to open the user.  When I try to connect to the corrupt user, it connects me to another user called (name.value of initial user followed a string of alpha-numberic characters)

  Thank you

  Hello Cscoler,

  Corruption of the profiles can be caused by malware, by repeated interruptions due to file system corruption and bad hardware issues. Did you run any malware removal software?

  When you created a new user account, have you configured it as an administrator? Do you receive error messages when you try to open a session in the corrupted profile, such as "the system has recovered from a serious error or user profile is corrupted"? When you log in the corrupted profile, are you able to view your data?

  Thank you

  James

• Windows XP home do not move to the user login screen too early.

  How to configure Windows XP home do not go to the user login screen after a short period of time?  Very irritating.

  Go in Control Panel > display > screen saver .  Change the settinghold and/or uncheck the box on resume, password protect . Boulder computer Maven
  Most Microsoft Valuable Professional

• Laptop was only gave me my uncle. How do I change to say my name on the user login screen, when I start the computer instead of 'Bob '.

  So I just got this laptop from my uncle, and his name is Bob.  When I turn on the computer and need to type in a password to sign in to get to my desk, he says "Bob."  How do I change to say my name... and when I do this it will automatically change my main folder with all my downloads and documents for say my name or if he insists Bob?

  I have not thinl there is no procedure for this, the only solution I know is to create a new account with your desired name, copy all the files and the settings for the new user account if you want, and then delete the original account when you are sure that you don't need more.
   
  Use the procedure on the article if you want to copy files and settings for the new user account.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/is-is/Windows-Vista/fix-a-corrupted-user-profile

• How can I retrieve emails archived a corrupt user profile. Using Vista and Outlook Express.

  Original title: Lost E-mails

  How can I retrieve emails archived a corrupt user profile. Using Vista and Outlook Express.

  You searched a .eml files? If you find one, do a right-click on one of them and open with | Choose the program. Select Windows Mail, and then check the alwaysuse the selected program to open this type of file.
   

• I forgot my password of user login. How to get in & change?

  Login user password

  I forgot my password of user login. How to get in & change?

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• 'Another user' login page to fix my computer F8

  I did restore the factory Dell Image several times in the past with no problems. Yesterday I restared my pc and hit F8, I'll repair my computer and I wait to display popups so I can do the factory Dell Image Restore, but need me to this ' another user ' login page and I type my username admin and it says the username cannot be connected.» I tried searching this problem on gooogle, but so far there is no solution. I have not all accounts running on this system. I'm running vista 32-bit. So my question is "How can I get past the other user login page" to get to the system recovery so I can restore my pc to factory conditions?

  Hello

  I suggest you to Dell Factory Image Restore by using Windows Vista installation DVD.

  Try the steps from the following link: http://en.community.dell.com/support-forums/laptop/w/laptop/how-to-perform-dell-factory-image-restore-using-windows-vista-setup-dvd.aspx

  Note: To restore the original factory image erases ALL existing data. This includes files, folders, programs, drivers, e-mails, photos. Before performing a PC Restore, back up all personal files. If you do not back up your personal files, data will be lost.

• after user, login and welcome screen, the screen is black no office

  after user login and welcome screen, the screen becomes no black no office, no error no display nothing. did the same thing in safe mode except with the border around the black screen safemode. System Restore didn't help, nor fact startup repair. the only thing I get is safe mode with command prompt and the system recovery options. Inspiron 1526 less then years.

  Hi Lilrockmike,

  Thanks for posting your question on the Forums of Windows Vista.

  Have you tried opening the the Task Manager on the screen by pressing CTRL + ALT + DEL?

  If you are able to open the Task Manager, please follow the steps in the data:

  1. click on the processes tab.

  2. scroll to the bottom and check if explorer.exe is listed under the name of the image.

  3. If explorer.exe is not in the list,

  (a) click file and then click New task (run).

  (b) type explorer.exe, and then click Ok.

  (c) check whether you have the back office.

  4. If explorer.exe is listed,

  (a) click on explorer.exe, and then click end process.

  (b) click file and then click New task (run).

  (c) type explorer.exe, and then click Ok.

  (d) check whether you have the back office.

  If the problem is solved, I recommend an antivirus on the computer analysis.

  I will recommend you to a virus on the computer scan using a good antivirus.

  You can also use Microsoft Live Onecare anti-virus.

  http://OneCare.live.com/site/en-us/default.htm

  Hope the above information helps. Please post back and we do know.

  Thank you & best regards

  Ashish Gupta
  Microsoft Answers Support Engineer