Cotas

Similar Questions

• Used only legitimate license key for windows 7. But could not be enabled. message: ' the key you typed cot allows to avtivate windows on this computer "."

  Used only legitimate license key for windows 7. But I could not activate. I get the message, "the key you typed cot allows to avtivate windows on this computer".

  In fact I even my other computer installed and uninstalled the one installed in this system. What is the reson? If yes what should I do?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.

  Click on the button continue, after a short time, continue button will change to a copy button.

  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• Can I use Sata of COTS drives in PERC H700 on R810?

  Can I use off-the-shelf (non-Dell) SATA drives in a PowerEdge R810 server with PERC H700 of RAID controller?

  We currently have equipped Dell SAS disks that will remain in their own virtual disk and want to add storage in bulk as a second virtual disk using less expensive SATA drives.

  (We have the latest BIOS & firmware all along)

  Cot = common on shelf?

  It depends on. I would recommend against any consumer/desktop/laptop or NAS drives (like the Red of WD). Use enterprise-class SATA if not certified Dell. As long as your firmware H700 is most recent 7/2010 (?), then the non-certified discs will be allowed, but no player not certified is guaranteed to work.

• Need for speed analog COTS of encoder Signal

  Hello all, need help for shopping.

  I have a client who wants to get an analog output at the level corresponding to the speed of rotation of a coder instead of the traditional measures of freq.  We want a stand-alone package which makes the measurement of the frequency on board and puts just an analog output scaling.

  Need< 100="" ms="" latency="" and="" ability="" to="" resolve="" 5="" rpm="" to="" 1000="" rpm.=""  just="" don't="" know="" where="" to="" go="" to="" buy="">

  Anyone know of such a device?

  Thank you

  Wes Ramm

  An example of many manufacturers of frequency to voltage converters:

  http://www.dataforth.com/functional.view.aspx?ptypeid=11

  Look at the detailed specifications to ensure that the input voltage range is compatible with the encoder as well as response time.

  -AK2DM

• You can get cot "Navigate visited slides only" to work on mobile devices?

  The recent update of CP9 fixed some important bugs for mobile devices, but I still find that when I use the option "Navigate visited slides only" in the Table of contents to restrict navigation this can always be undone on mobile devices by dragging left or right.

  Is there a solution for this? I know I could disable gesture of support, but the double click to switch the table of contents is very convenient, especially on small devices. I don't see an option to specify that certain actions on the edition. Is this fixed in the next update?

  Hi André,.

  Navigate to sliding visited only option is OCD related. That is, you cannot navigate to any slide by OCD if the blade is not visited. However, you are allowed to go to the next and previous slide through game bar buttons / or drag gestures.

  How ever if you want to restrict navigation gestures by slide you could do that in cp9 uncheck the option 'allow the gesture Navigation' which is present under properties (slide).

  -Derrick

  Adobe Captivate team

• How to configure a column two COT

  I wish I had a column two OCD but now InDesign does not seem to recognize the width of my columns. I tried to adjust the tabs and recreate the table of contents of all parts, but it has no effect. Character styles are set up to be left-justified. I created these "columns" by making two 2,0625 "width text boxes and putting them together. CS4 on Mac.

  

  As Bob says, a tabulation of withdrawal right will force the tab on the edge of the column.

  You insert by opening the most Options in the Table of contents dialog box and then use between it input and the numeric field to enter the code tab of the withdrawal right. Or use the menu to select it.

  

  You may need to play with the settings of the tab for the style of entry in order to get the leaders of the tab to display correctly.

• Table of contents don't link to pages in a doc Pages

  Info entry:

  1. a .pages document
  2. blank template
  3. presentation of two columns

  The problem:

  Table of contents generated refuses to do interactive links to the corresponding pages. Styles is ok (so that's why I was able to compose the TOC).

  What is the problem and how to operate?

  4.2 pages (iWork ' 09)

  The document itself (a link to download, editable).

  https://drive.Google.com/file/d/0Bwsy7q2Qc3TCOElPVG02TWFqV3c/view?USP=sharing

  I forgot to mention that my document consists of many sections. While my other document that has its main contents in a cot, a great section working very well in this regard, for example, I am able to go to any title by clicking an appropriate fake (the pointer is active as opposed to the doc above).

  Much appreciate any input on this.

  Thank you

  I.S.

• Bad decisions are made in the development of Itunes.

  My hope is that in some sort that could attract the attention of developers.

  I'm a strip club dj and producer, usually just a fan passionate about music, who likes to spend a lot of time with my music.

  Auto-Cote for albums is not a feature that users who eagerly sort through music, or use the sides to navigate playlists while working appreciate what-so-ever. This problem could be solved easily by just putting in an option in preferences to enable or disable auto-cotes.

  I literally pray fate every time an update that this was added or auto-cotes be abolished. It affects my work and therefore my daily life.

  In this current update, the option 'Show duplicates' disappeared. I use this feature a lot. Please do not take me. Please?

  The research also works on at least windows is broken. I can search is no longer a song using portions of different fields to achieve results. I have to an input field, press ENTER, and then the rest of the entry. One example being:
  If I searched "Miguel Wildheart" it would come with nothing because I used the field of the artist and the song to the research. However if I entered "Miguel" hit enter and then typed "wildheart" after it would come with what has not shown previously.
  While this might be easy to overcome, it was rather difficult to break the habit after having spent literally the entire life of iTunes by using the search bar to its greater flexibility.

  I talked to people in the store and called customer service. Everyone seems to see these flaws, but can usually do nothing about them. I hope that there is someone out there who can see this and cares. I want to just use iTunes to its full potential as I have for years.

  In this current update, the option 'Show duplicates' disappeared. I use this feature a lot. Please do not take me. Please?

  In the menu bar, File-> library-> show duplicate items.

  Since this is the forum for discussion of Apple users, you can also send feedback to Apple here

  https://www.Apple.com/feedback/ (under OS X Apps - iTunes)

• my javascript or my site breaks in the latest version, Firefox 20 and works well with chrome and IE, what is the problem?

  Hi, my website can't load a lot of thing in firefox 20.
  My search ajax breaks, it does that for the first time you visit, and he disappeared for always after that.
  A lot of things happen. But its all works well in IE and Chrome. It's so embarrassing for me.
  You can visit my site at http://www.apasaja.biz

  There are warnings of CSP (content security policy) in the error log showing that Firefox is not load scripts.
  
  So, you will need to look into this.

  • x-content-security-policy: allow 'auto '. script-options inline; IM$

  CSP WARN:  allow directive is deprecated, use the equivalent default-source directive instead
  CSP WARN:  Couldn't process unknown directive 'im$'
  
  CSP WARN:  Directive default-src https://www.apasaja.biz:443 violated by https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js
  CSP WARN:  Directive default-src https://www.apasaja.biz:443 violated by https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/jquery-ui.min.js
  CSP WARN:  Directive default-src https://www.apasaja.biz:443 violated by https://secure.comodo.net/trustlogo/javascript/cot.js

  • https://developer.Mozilla.org/en-us/docs/security/CSP
  • https://developer.Mozilla.org/en-us/docs/security/CSP/Introducing_Content_Security_Policy
  • https://developer.Mozilla.org/en-us/docs/security/CSP/CSP_policy_directives

• Can I add another hard drive to my Mac Pro?

  End of 2013

  3.7 GHz quad core Xeon E5

  16 GB of ram

  500 GB Flash

  Ive run out of hard drive space. Can I add another flash drive or is it better to buy an external hard drive? If external which is more reliable Thunderbolt or USB 3?

  Go on everymac.com and find your model of Mac Pro for a good list of specifications and upgrade opportunities.

  I know "reliable." Limits of reliability are probably based on the envelope model and model also in car inside (not always easy to find) rather than the type of connection. Thunderbolt is probably faster but still a somewhat unusual connector to find so if you are looking for less cotly a USB3 will be cheaper and there will be more models available. Make sure you know that there is a reliable drive inside.

• Formatting of RS-422 data display / handling

  I hope someone here can point me in the right direction.

  I am developing an alternative to COTS Accessport program (http://www.sudt.com/en/ap/) in Labview.    I found a basic example of serial communication I could manipulate and display my data stream (32octets HEX, 69 being the starting byte):

  

  Where my problem is in the data stream.    This example displays the data as a string type in this text box 'read the string '.    I need to handle data type string and break-out/display individual bytes, and I don't really know where to start.   I tried to add a table... but I'm a data type mismatch in the block diagram.

  Block diagram error

  Finally, I would like to be able to select / monitor only specific bits and leave the LabView to manage the processing of the data... but I'm me.   Thoughts?

  1 remodel table is wrong.  And through the shift register stages do nothing for you other than to delay all these manipulations.

  You want to add all the 36 bytes, integrate in a table.  Delete the oldest lines using delete in the table.

  2 and 3.  You use bytes to the Port which I have told you is the wrong thing to use.  I described a method for how to find the starting byte.  See my attached VI where I implementd that.

  4. you can create an object of front panel, perhaps an indicator of the photo or the color block you the size to cover a column.  You can use the events to slide the mouse on this control to detect where to go to.  It's really a question own right beyond the analysis of the series.

  In addition, you have your string to write together as * IDN?  (It has been converted into hexadecimal display so it was not so obvious).  Are you sure that's what you want to write?  That works for instruments such as spectrum analyzers, power supplies, DMM.  It is built in examples of series, but often that order means nothing to most of the devices series that speak to you.

  You also had the active stop character.  This means that any time you get the stop character (newline hex10), the reading series will shorten.  That's why you think you're getting asymmetrical data.  When you work with binary data, you must disable the stop character and other methods (such as a defined 36 byte packet size) to determine how to read.

• error Analyzer VI 1430

  I've been using VI Analyzer fine yesterday. This morning I fire off LabVIEW during the night, and I get the error 1430. I'm using LabVIEW version 10. I don't understand what the error description tells me.

  What does this mean? The program works very well.

  This error occurs during execution of the test of the index of modularity.  If your Subpanel.vi COTS is not broken (as with missing subVIs), then my best guess is that something is wrong with the list of folders excluded for the test.  Can you post a screenshot of your modularity Index like this test configuration?  I want to see if something seems fishy with your excluded folders list:

  

  Ideally, you could also post the VI (and all its subVIs) to help me further, but I don't know if this is possible on your end.

• series-usb lag with other usb devices

  I don't think that the title of this post fully captures the problem I am facing, then, let me explain a little more.  I'm trying to interface with a lot of devices in LabVIEW, two of my machines are built to order and use adapters of RS-422 to USB and another 4 devices are devices of BEDS that use USB.  So, all of my devices are connected to my computer via USB (via two 8-port external powered hubs).  I basically read data from my custom built devices, then using this data to control 4 devices for the use of cots.  My custom devices are running at 3.6 Mbit/s and reading data from them with nothing else connected works very well. The problems begin to occur when I begin connecting devices COTS.  I have connect and try to interface with them, I start having problems contacting my two custom devices.  Specifically, one or two devices from start to lift saturation errors until the data flows become unnecessary.  In addition, I also sometimes experience what is described as a ghost mouse problem.  My mouse starts moving and clicking on its own (opening programs, windows resizing, etc...).  I guess that's probably the USB driver listens outside.  The only way to stop it is to disconnect all the USB devices on the machine.

  Someone knows something like that before?  Can anyone suggest how disturbing these questions?  I'm kind of at a loss on what to do?

  I have no real information on your specific problems.  But, your computer will probably several USB controllers and you try to plug your controllers separate hubs to divide the load to the usb.  It might take a bit to search a manual or online to see which ports belong to which controller.

• Schema (xsd) for tag CVT file

  Where can I file the .xsd to loaded or unloaded tags files by / stored in the library of dashboard values (CVT)?

  I have an urgent situation.  I am the head of software for a machine control project which relies heavily on the possibilities of client configuration and management tags.  I proposed an architecture that included use of CVT, CCC and TCEs to manage configurations; only to find the update of TCE broken v2.x compatibility XML with FPC.  The project nor to update the CVT to remedy this situation does not seem to make a lot of progress, so I have to workaround to meet my fashion calendar.  My plan is to use an open source or COTS XML tool for managing configuration rather than traditional cultural expressions.  However, I need a copy of the xsd to a solution that is consumable for the customer.

  Where can I find it?

  Side note: I noticed similar questions for the other components of LabVIEW.  I suggest you post drawings and standards in an area of document decible.ni.com.

  deepforge,

  You have read the following information? http://zone.NI.com/reference/en-XX/help/371361J-01/lvconcepts/converting_data_to_and_from_xml/

  At the end it says the following:

  XML schema for LabVIEW

  LabVIEW converts the data to an established XML schema. Currently, you cannot create custom schema, and you can't control how LabVIEW tags each piece of data. Also, you cannot convert any screws or functions in XML.

  The predefined XML schema used by LabVIEW is LVXMLSchema.xsd located in the labview\vi.lib\Utility directory. You can open the file in a text editor to read the schema.

• Upgrading memory on the PXI-8105 controllers and PXI-8106

  Hello

  I've recently upgraded the memory of three PXIs; one with a PXI-8105 controller and two with the PXI-8106 controllers.  Both the 8105 and 8105 can have a maximum of 4 GB (2x2gb) DDR2-677 (PC2-5300) (see links below).  However, on the three systems, both the BIOS and the o/s only see 3.3 GB.  No idea why this might be the case?

  I tried to Flash the BIOS (v1.4 on the two PXIs), but without success.

  We use COTS memory (i.e. not purchased NOR) but I would be badly pushed to believe it is the cause of the problem.

  Thank you.

  Links;

  • The PXI-8105 http://sine.ni.com/nips/cds/view/p/lang/en/nid/202630 max memory capacity
  • The PXI-8106, http://sine.ni.com/nips/cds/view/p/lang/en/nid/203442 max memory capacity
  • Update BIOS page: http://digital.ni.com/public.nsf/allkb/9C9362590B05CD6E86256B270082164A

  I don't know about the BIOS reports less than 4 GB. Here's a blog post that best describes what I wanted.