could not access vb run time for custom action script

Similar Questions

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• Error 2738 could not access VBScript Runtime for custom action

  Well, I have the same problem error 2738 could not access VBScript run time for action custom when I try to install incredimail I just do a restore to factory in the last 2 days I do not even have all yet loaded things back and I came across this problem so here is my contact information and what I tried already :

  I'm running Windows Vista Home Premium Service pack 2 32 bit
  I use Mcafee and installed and after reading just down to you ensure that I uninstalled and ran the cleaner program suggested and she has still not work, I reinstalled and not yet did not work so I've currently uninstalled again and the vacuum again 3 times
  I ran all the advice from the command prompt still does not work
  I tried to delete the registry entry suggested HKCU\SOFTWARE \Classes\CLSID\{B54F3741-5B07-11CF-A4B0-00AA004A55E8}, but he's not here to remove
  I ran this command suggested reg delete "HKCU\SOFTWARE\Classes\Wow6432Node\CLSID\ {B54F3741-5B07-11CF-A4B0-00AA004A55E8} and I think that maybe it wasn't a good idea but may not know whether it was or not.
  Then I read in this thread on Mcafee to a registry entry and redirecting somewhere it should not so I went to look at and that's what I found:
  HKEY_CLASSES_ROOT\CLSID\ {B54F3741-5B07-11cf-A4B0-00AA004A55E8} \InprocServer32 - default REGSZ C:\Program Files\Fichiers Files\McAfee\SystemCore\ScriptSn.20110417221023.dll
  and no I have not yet reinstalled McAfee and ran to the 3 times vacuum why is there always a register McAfee entry I followed the path C:\Program Files\Common Files\McAfee\SystemCore\ScriptSn.20110417221023.dll and guess what it's not exist, and yes I looked into the hidden files I even ran a search in all files and it is not anywhere
  I had already run the sfc/scannow once before I deleted the McAfee and it found corrupted files, but said they have been fixed as well, I ran again just to check and this time no errors
  HELP, I am at a loss of what to next in addition to another factory restore which I really really DON'T want to because I have an I had my computer since February 2007 as well as the amount of updates to Vista I need to do well is all together besides the Service Pack 1 and 2 there are more than 300 reviews have even not looked optional and yet if pardon my language is a pain in one @.
  Please can someone HELP!

  Whoo Hoo!

  Someone told me how to change the permissions on the registry key and DUH! I knew how to do this, so I changed the and then changed the key to C:\Program Files\Common Files\McAfee\SystemCore\ScriptSn.20110417221023.dll TO C:\\Windows\\system32\\vbscript.dll
  Restarted checked and then ran the installation for incredimail and IT WORKED!
  Thank God I've been playing with this for 2 days I really doesn't want to have to do another restore of factory which is what I was about to

• Internet security problem - I got a security alert was attacking my computer or filtered in and I could not access the internet

  Yes, all of a sudden, I got a security alert was attacking my computer or filtered in and I could not access Internet, I advocate for window / malware scanning and also, mcafee for extra security, but it happens still., why? Then a few days later, I was able to get on the internet again, only about 2 days, now I can no longer access the internet, Iget, open with file, message, so I guess I have to reinstall internet explore, some of my applications are not running, but I think that their always there.  I have scan Windows / Defender and mcafee installed and running on my computer, so what's the problem here?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Error 2738 - could not access VBScript Runtime for custom action during the INSTALLATION of broadband dongle by distribution VODAFONE K3565 rev2. ON WINDOWS 7 PREMIUM

  Whenever I try to install a dongle broadband PAYG Vodafone K3565 rev2, I get an error message; -error 2738 - could not access VBScript Runtime for custom action. I am running Windows 7 Home Premium on a Samsung R522 again.
  I found that I got the same error message when I tried to install INCREDIMAIL on the same computer laptop.

  On the vodafone website, I found a resolution the resolution I found was;

  1. run command prompt as administrator
  1.1 Start Menu-> all programs-> Accessories
  1.2 right-click on command prompt and select run as administrator of
  
  2. If you are using the 32-bit version of Windows:
  Type cd %windir%\system32 in the command prompt and press ENTER.

  If you are using the 64 bit version of Windows:
  Type cd %windir%\syswow64 in the command prompt and press ENTER.

  3. type regsvr32 vbscript.dll in the command prompt, and then press ENTER.
  

  When I tried this, I got a message that this had been done but I tried to install the programs and even once, they both failed and I got the same error as before.
  
  Can anyone help?

  Well... It has been a week. I know too much now.

  ATTENTION: This field is very complicated AND there are too many incorrect analyses out there.

  The problem for me is (FOCUSED) that the current user HK had entires THAT SHOULDN'T BE!

  The computer settings are found under the Local Machine of HK. HKLM must be correct.

  Procedure: REMOVE all entries in HKCU. Correct path the InprocServer32 value.

  My specific (2738) error occurred trying to find "vbscript.dll" (aka "\{B54F3741-5B07-11cf-A4B0-00AA004A55E8"})

  Some antivirus software redirects requests for certain things by herself (aka 'diversion'). If the

  InprocServer32 is EMPTY (in HKCU - for me). All of the solution has been to remove the HKCU entries.

  Another little attention is: (for example) vbscript.dll has several references (app, authorization, RegExp)

  so be on the lookout for the 2 and 3, as well.

  \{B54F3741-5B07-11CF-A4B0-00AA004A55E8}

  \{B54F3742-5B07-11CF-A4B0-00AA004A55E8}

  \{B54F3743-5B07-11CF-A4B0-00AA004A55E8}

  I removed the entries in HKCU. Run the error code again. (Mine = .msi)

  This information is redundant. Gokul T response (upstairs) was correct. It does not sink into my head when I read it. But this thread was open the door to the solution for me.

  Thank you...

• Error 2738 could not access VBScript Runtime for custom during the installation of a turbostick action.

  I am trying to install a turbo stick on my acer aspire - and getting a 2738 error could not access VBScript Runtime for custom action. I am running windows 7 and acer and Bell - my provider have not been able to help.

  Kevin

  Hey Kevin,

  Thank you for the update.

  1. Run as administrator command prompt:
     1. Menu start-> all programs-> Accessories
     2. Right-click on command prompt and select run as administrator
  2. Type the following command at the prompt: reg delete "HKCU\SOFTWARE \Classes\CLSID\{B54F3741-5B07-11CF-A4B0-00AA004A55E8}" /f, then press on enter.
  3. Then, you must also type the following command: c:\windows\system32\regsvr32 vbscript.dll, and then press ENTER.

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• When installing or uninstalling the software get error 2378 - could not access VBScript Runtime for custom action

  I get error 2378 could not access VBScript Runtime for custom action, when I try to install the software and uninstalling some software.

  I tried several online for regsvr32 vbscript.dll fixes and nothing has helped.

  I tried to remove the keys from HKCU\Software\Wow6432Node and it is said that they do not exist.

  I have registered the VBScript engine in the folder it is installed, said successful but still does not work.

  I tried with run as administrator of the command-line also.

  It is a Dell laptop with Windows 7 Home Premium 64 - bit.

  Any suggestion would be appreciated.

  Thank you

  Oldestman

  Hello

  What operating system is installed on your computer?

  Method 1: This error message indicates that the VBScript engine is not currently registered on the machine where the installation/uninstallation. I suggest to try the steps below and check if the problem is resolved. If you have already tried these steps then we do know.

  Delete the registry following key then save the VBScript code and check if that helps:

  Step 1:  If you have a 64-bit operating system, you must follow these steps:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  c. at the command prompt, type the following command and press ENTER:

  reg delete "HKCU\SOFTWARE\Classes\Wow6432Node\CLSID\ {B54F3741-5B07-11CF-A4B0-00AA004A55E8}" / f

  If you have a 32-bit operating system, you must follow these steps:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  c. at the command prompt, type the following command and press ENTER:

  Reg delete "HKCU\SOFTWARE\Classes\CLSID\" /f {B54F3741-5B07-11CF-A4B0-00AA004A55E8}

  Step 2: Register VBScript by following the steps below:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. at the command prompt, type the following command and press ENTER:

  If you are using32 bit version of Windows, and then run the following command:

  regsvr32 vbscript.dll

  If you are using64 bit version of Windows, and then run the following commands:

  %windir%\syswow64 CD

  regsvr32 vbscript.dll

  d. after the command is executed successfully, try to install

  Method 2: Diagnose and correct program installation and uninstallation of the problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• How to fix "error 2738... could not access VBScript runtime for custom action' tries to apply the update to my service of Incredimail.

  How to solve the following problem found while trying to download an upgrade of my Service of Incredimail.

  "Error 2738...". could not access VBScript runtime for custom action"

  The most likely cause is the antivirus bloocking the script.

  Check your AV settings (AV is?)

• Problem of uninstalling with the error 'could not access VBScript Runtime for custom action'

  I'm having a problem uninstall a program. I'm getting repeatedly blocked in error: "could not access VBScript Runtime for custom action.  That means this error in uninstall a program? Would appreciate a fix for this. The program is called Soluto.  Thank you.

  P.S. I tried as admin and type regsvr32 vbscript.dll then regsvr32 jscript.dll in the command prompt.

  As well as their registration as an administrator, you may need to remove the entries for them in HKEY_CURRENT_USER.

  See:

  http://blogs.msdn.com/b/astebner/archive/2007/06/07/3151752.aspx

  Also, make sure that your antivirus software is not blocking scripts.

• Error message saying "error 2738. Could not access VBScript Runtime for custom action'.

  I am trying to download the software Sky Player and get an error message saying "error 2738. Could not access VBScript Runtime for custom action'.  I have contacted sky and went through the procedure, they have recommended, but nothing helped.  Can anyone help please.

  Here is an article on this exact error message that can help solve the problem:http://www.jakeludington.com/windows_7/20091115_error_2738_could_not_access_vbscript_run_time_for_custom_action.html.

  Here is another article which basically says the same thing, although procedures vary slightly:http://www.nitropdf.com/kb/article.aspx?id=10106&cNode=3D8W4P.

  I hope this helps.  Keep me posted.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• could not access a file. possible anti-virus protection is running. error (0x80070005)

  could not access a file. possible anti-virus protection is running. error (0x80070005)

  Try a system restore to a Date before the problem began.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Could not access network location %APPDATA%\microsoft\windows\sendto during the installation of QuickTime for iTunes

  I get an error message "could not access network location %APPDATA%\microsoft\windows\sendto" when I try to install iTunes.  It always happens during the installation of quicktime.

  Hello m.minton,

  You can watch the following information from Apple on the installation of QuickTime:
  http://support.Apple.com/kb/HT1926

  Please let us know if the information of Apple Help or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The user * address email is removed from the privacy * could not connect, could not access the directory.

  For the second time in the last two weeks going through my event logs, I noticed several hundred newspaper failed attempts at the course over a period of twenty minutes.  they are random user accounts that don't exist not user 1, user 2, www., or just names at random, the papers say newspaper caused by a wrong password or account.  "the first of these events several connected has this message:" user * address email is removed from the privacy * could not connect, could not access the directory. ».  What does that mean?  Do you need access and control my computer?  Any info would be a great help.

  Looks like someone trying to log on your computer.  Check your firewall settings to make sure that they can't.

  Visit https://www.grc.com/x/ne.dll?bh0bkyd2 the site "shields up" to perform a check.  Some people to dismiss the guy who runs it, but the test doesn't show you which allows your computer to the world to see.

• Error 1606: Could not access network location % APPDATA%\.

  I am trying to install a game for Windows: Zoo Tycoon 2 Ultimate Collection (which is Zoo Tycoon 2 + 4 expansion packs), on a Vista Home SP2 machine.  When you install disc 1, I almost immediately get the error above,Error 1606: could not access network location % APPDATA%\. I looked at the error on this forum, who led me to the installation page for the installation package located manual download page offline at the: http://www.java.com/en/download/help/error_installshield.xml. When I tried to install the offline installation package, I got the same error, 1606.  I don't know what to do next?  This game comes without a product key, this support won't even take my call.  Thank you-

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

  Here are the steps to fix it.

  1. click on start, run, typeregedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  3 remove the entries that show the path that is listed in the error message.

  886549 KBhttp://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point tonew, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, clickchange, type the value in the value data for the value name box, and then clickOK. The value data must be: % USERPROFILE%\AppData\Roaming.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.

  Good luck. Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Whenever I try to download something, he said that he could not access APPDATA Error 1606. How can I solve this problem without any of my stuff getting deleted?

  Whenever I try to download something, he said that he could not access APPDATA Error 1606. How can I solve this problem without any of my stuff getting deleted?

  Hello
  1. what Internet browser do you use?
  2 are you having the same problem with other browsers also?
   
   
  Method 1: I suggest you try SFC running [System File Checker] scan on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2: If the problem persists, you can try the steps mentioned below and check if it helps.
   
  (a) click Start.
  (b) type regedit in the Start Search and press enter.
  (c) access the site mentioned below.
  "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
  (d) then change the appdata read "% USERPROFILE%\AppData\Roaming" thing
   
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
  
  
  Hope this information is useful.