Could not add Card - Visa

Similar Questions

• Could not add the new folder to a new Library_Windows 7

  I get a dialog box that shows the following notification (see below) whenever I try to add a folder to the new library in Windows 7. I tried to get to a point where the notification is not display and add a folder to the newly created library but I am unable to.

  Dialog box:
  C:\Users\my name\Documents\ Embroidery\New Classes_Digitized adorable folder refers to a location that is unavailable. It could be on a hard drive on this computer... could have been moved to a different location.
  This new library is not related to the classes cunning. I create a library of classes adorable some time ago and added a new folder. I don't have to use the library and so I removed it. Probably not the right way to remove a library and thus the reason for the problem earlier. Any advice would be much appreciated.
  Carol

  Carol

  See if my answer in this previous thread helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/why-cant-i-create-a-new-folder-in-Windows-7/0af243fd-138a-4e71-a34b-826153b80f62

• Cam of the NAC could not add the access switch

  Hi all

  My problem is I can't add the access switch to the cam using mozilla firefox or IE.here attech file cannot add the device. Any idea to solve my problem?

  Hello

  Plese note to add a device (switch) to the CAm, you must go to the leadership of OOB-> appliances-> New.

  First, you must configure the SNMP settings on the switch and the cam so that the cam and the switch can communicate.

  I advise you to make sure that carefully read the configuration for OOB guide and management switch:

  http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cam/m_oob.html.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Could not add the instance VO in the AM data model

  Jdev version: 11.1.2.4

  Steps to follow:

  (1) created a VO based on the SQL query.

  (2) when you try to add the VO instance in the AM data model, "Add an Instance" arrow (right arrow) is disabled.

  Please advise.

  Found resolution - Metalink Note 1530486.1.

• Could not add the instance of a hidden subform

  I use Adobe Designer 10 and have used the Action feature to set up my buttons.

  Here's the problem:

  The user is presented with a question:

  You eat apples? Yes/No.

  If the user selects the 'Yes' box, then the subform, 'WhatKindofApples', is set to Visible and appears.

  If the user eat more than one kind of apple, the user must be able to add additional instances of 'WhatKindofApples' by clicking on the button 'add additional apples '.

  If the subform, 'WhatKindofApples', is set to Visible the button 'Add additional apples' works very well.

  If the subform is set to Hidden, then the Add button does not work.

  So, it seems that there is some kind of conflict between being able to add additional instances of subforms hidden once they become visible. I have included my form Javascript code.

  Here is the Javascript code for the Add button:

  Form1. WhatKindofApples.AddAddlApples::click - (JavaScript, client)

  + PRODUCT - CHANGE (ID:0482B39E - E8D0-4F08-B 313-E142D733EE1F CRC:2782582760)

  + Type: Action

  + Result1: AddInstance ("$Node2")

  + Node2: form1 [0]. WhatKindofApples [0]

  + Node1: form1 WhatKindofApples [0] [0]. AddAddlApples [0]

  + Condition1: Button ("$Node1", "click")

  + ActionName: AddlEntityPrivate.click

  this.resolveNode('form1._WhatKindofApples').addInstance (1);

  If (xfa.host.version < 8) {}

  XFA. Form.Recalculate (1);

  }

  //-

  Any help would be greatly appreciated!

  Hello

  I suspect that the addInstance() is trying to work. Keep in mind that the addInstance() will create a new instance of the object that is repeated in its original state. So if the extensible object has hidden, then if new instances are created they will be also hidden.

  A work around would be to establish the presence of the subform to visible in design mode (object > field palette). Then, in the object > range of binding the value the number Min 0. This means that when the form is rendered, the subform will not appear. Finally, the script in the click event of the button would add an instance, rather than make it visible.

  Hope that helps,

  Niall

• Win 2003 error - try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded

  When you try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded, or function OcEntry could not be found. code error 0x7e is on a system win 2003

  Hi MickRl,

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows could not automatically bind the Protocol IP on the network card stack.

  Hello

  I installed an Edimax EW-7718Un network adapter that does not connect to the internet. I installed the same device on my Windows Vista laptop and it works fine, this isn't a problem with the product or my BT Home Hub. I checked the Edimax website and this product is compatible with Windows 7, and I have the latest drivers for it. I did the following to try to resolve the problem:
  -I've already been on the adapter properties, and clicked on "update drivers", the system says that the network card is working properly and that the drivers are up to date. I also installed the latest drivers on the Edimax website but the issue is not resolved.

  When I solve the problem, he told me that "Windows could not automatically bind the IP protocol for the network card stack."

  Please note that the settings are correct as the TCP/IP and DNS are set on "automatically get an IPv6/4 address server / DNS automatically".

  Also of note is that in "Network connections" in the Control Panel, the device is listed as "Disabled", I click to activate it but it does nothing, the network connection is still disabled. When I click on "analyze what" the same message "Windows could not automatically bind the IP protocol stack to the adapter network." appears.

  I also have compeltely re-installed Windows 7 and use the system restore, neither worked.

  I hope you can solve this problem.
  Thank you
  Mickey

  Hi Mickey888,

  According to the information provided by the Edimax website this particular model supports up to Windows Vista only.

  http://www.Edimax.us/HTML/English/products/EW-7718Unspec.htm

  You can try to install the same in compatibility mode and see if that solves the problem. To run the troubleshoot compatibility utility follow the link below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry smartphones can not add AMEX to Android payroll card

  I can't add my Amex for Android. The error is:

  Your card could not be added

  For more information, contact your bank. You can also try to add another card.

  This may seem like a problem Bank/Amex, but I know it's related to the priv. How can I know it? I just added the same Amex card on two other Android phones: my HTC Onre M8 and my LG V10.

  For laughs, I called Amex in any case. Spent 30 minutes on the phone with three different departments. They know nothing about this error, and even the tech Department has noted that the map has been added successfully to two other phones and referred me to the phone manudfacturer.

  Request a call from the Google Android pay Department and spent 30 minutes more on with them. They also noted that the map has been added successfully to many Android phones and referred me to the manufacturer of the phone.

  It was 100% a private question.

  Help, please.

  -SW

  It works now. No idea why. All good though!

  Ty, thanks for the great followed as usual!

• First CC/Nvidia card - could not find capable video game modules

  I just bought a new laptop Toshiba Qosmio x 75 with a 770 M Intel HD 4600 Graphics and Nvidia graphics card.

  Data sheet:

  • 8.1 Windows x 64
  • Intel i7-4700MQ 2.4 GHz
  • 16 GB of Ram
  • 2 500 GB @ 7200 RPM SATA

  I have CS5 and wanted to use first CC. downloaded PPCC compared to clouds and open a few books on CS5 a few time s. Had to add card for laptop for the best card CUDA faster to be recognized and everything was fine. a few reboots later I received an error "Unable to find capable video game modules" and were not able to open PPCC since. He stops on Vignette.aex.

  Opening first CC was obviously using the map intel, I have tried to use the Nvidia card so I assigned the best 3GB memory card to the MCCP. I could open some time after.

  I tried:

  • CC PD uninstalled and installed several times.
  • Uninstalled and installed 770 M Nvidia driver several times. 770 M driver updated several times.
  • changed to 'use as administrator'
  • GeForce GTX 770Mcards adding"this should be done from AFX and other programs. It was recognized even in first so that I could always open the program (before the boot error)
  • tried to change the "compatibility" in previous versions of Windows (found some corrections on adobe threads)
  • "User profile-name" in "Documents/Adobe/PremierPro/Profile' compensation

  I have read around forums Adobe, searched google and you tube, and it is a problem that is underway. I have not been able to find a definitive answer from adobe or anyone else.  Seems people are just throwing ideas out there and some work and some never get their determination of the question and give up. This does not help me solve the problem and I need a list of tasks that will help me to resolve this problem immediately, please.

  I could never open the application by modifying settings or deleting and then reinstalling the software until I went back to a past point since before the issue of restoration. It works and has a few weeks. I think that the problem results from the Intel graphics card driver update. I have 2 graphics cards.

  I wonder in this sense, since the restoration, but I don't do anything until I get this project. Too risky. Certainly a question that must be resolved with Adobe communicating CC equipped with part 3. John T Smith's right, I've seen several issued reported with two cards, but it's hard to say having so many problems with CPU chart.

• This add-on could not be installed because it seems to be altered in mozilla

  This add-on could not be installed because it seems to be altered in mozilla

  This occurs when the extension is signed and has been changed (tampered with).
  Ensure that security software is not decompress the file for inspection and he repacks because that would invalidate the signature manifest.

  • https://support.Mozilla.org/KB/add-on-signing-in-Firefox
  • https://wiki.Mozilla.org/addons/Extension_Signing

• Device could not start - Code 10 - Intel Wireless Card on NB550D

  Hello world

  It's just a normal Toshiba NB550D netbook

  The only thing I change is the card inside Wireless: the original is an Atheros common half mini card. Recently, I have the urge to use internet in 5 ghz (frequency).

  So, I decided to replace the old with the * half mini card Intel Wifi Link 5100 AGN *.
  It turns so well. The pilot is not recognized or specifically the windows tries to install the driver but FAIL is reported. Device manager tool shows a "!" next to the network adapter and when I go the properties on the general tab: "* the device could not start - Code 10."

  I tried many ways to uninstall the driver and reinstall it again; also tried to download the drivers from the website of toshiba for the network card intel.

  Nothing works so far and yes I don't know what to do now.

  The possibility that the card intel is broken or defective is eliminated because I checked with another laptop already and just, it worked like a charm.

  Please help me solve this problem. I really need to use two strips (2.4 and 5 ghz) internet.
  Appreciate any help!

  > The possibility that the card intel is broken or defective is eliminated because I checked with another laptop already and just, it worked like a charm

  Regarding the error code 10:
  http://support.Microsoft.com/kb/943104/en-us

  + The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. +

  I put t think deliver its wireless network card might be a compatibility problem between the BIOS and the wireless network adapter.
  All devices are supported by the BIOS.

  But the WLan card already appears in Device Manager and so I think that there should not be a BIOS compatibility issue.

  Have you checked if the chipset would properly address the Wlan card?

• Cannot install add-ons in Firefox 4 "[Add on] could not be installed because Firefox failed to modify the necessary.".

  I tried to install add-ons for Firefox 4, but were unsuccessful.

  If I try to install inside the about: addons, the add-on will download, but then the installation bar will not change.
  If I try to install from addons.mozilla.org, the add-on download but then I get a message in the info box on site (at the side of the address bar) which reads, "[module] could not be installed because Firefox failed to modify the necessary."

  If I try to install any other modules after that, I get an error.

  I'm under Ubuntu 10.10 on a Toshiba Satellite U400.

  On config variables xpi: enabled = true.

  I'm having this problem. I am also under Ubuntu 10.10 and Firefox 4.0 (Canonical version 1.0) 32-bit.
  When I try to install the Greasemonkey addon (and other addons), it downloads, but the installation progress bar remains at 0%. I can not also cancel installation. If I try, I get the error:

  Error: Cannot cancel install of https://addons.mozilla.org/firefox/downloads/latest/748/addon-748-latest.xpi?src=addondetail of that State (5)
  Source file: resource://gre/modules/XPIProvider.jsm
  Line: 5168

  When you try to install, I get this error in the error console:

  Error: this.installLocation is not defined
  Source file: resource://gre/modules/XPIProvider.jsm
  Line: 5751

  I read on the troubleshooting page of Firefox that xpinstall.enabled should be set to true in the configuration: about, but there is not in my list of config, so I tried to add it, but it made no difference.

• Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Hello...

  Force restart your iPhone > press on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  Then try to add a card again > define and use the Apple pay on your iPhone

  And make sure your bank / card is accepted for use with pay Apple > Apple pay participating banks and store card

• HP Pavilion g7-2043sf: Windows could not find a driver for your network card

  Model: HP Pavilion g7-2043sf

  Product number: B1P51EA #ABF

  Today, I did a clean install of Windows 7 on this laptop and I can't connect to internet via wifi. When troubleshooting I get this message:

  Windows could not find a driver for your network card
  Windows does not detect a network card is installed correctly. If you have a network card, drivers for the card cannot be installed correctly.
  Install a driver for your network card
   
  Collection information
  Windows Version: 6.1
  Architecture: amd64
  Time: Thursday, December 24, 2015 12:34:16

  In Control Panel, I found this information:

  Ethernet controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  Network controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C
  PCI\VEN_1814 & DEV_539A & CC_028000
  PCI\VEN_1814 & DEV_539A & CC_0280

  I visited this side: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g7-2000-Notebook-PC-series/5226249/model...

  I need all drivers of network?

  Thank you.

  Hello:

  You need these drivers...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55979.exe

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp58586.exe

• Age of Empires 2: Age of Kings does not work on Windows 7. The error is: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  I can't get my Age of Empires 2: Age of Kings drive on my computer.

  It gives me the error message: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  What exactly is DirectDraw. and how can I make my video card and the driver compatible to it. I already tried to uninstall and reinstall the drive.

  Help, please!

  What kind of graphics card you have and you have the latest DirectX and video card drivers? If this isn't the case, update them.