Satellite L505-13Z - strange noise in the audio output

Similar Questions

• Satellite P200 made strange noises after the closure of music

  I have a Satellite P200 and flash cards do not respond and when I ve played music.
  The computer makes strange noises after the closure of music?

  Help me please!
  friend Wendy

  Hello Wendy

  Please don't get me wrong, but it's not easy to understand the problem that is described in your ad.
  I have the same model of laptop and everything works fine. I listen to music every day on Windows media player (mp3s) or radio listening online using the Winamp player.

  At the same time, I can use flash cards.

  What about strange noises? Who knows what you mean exactly and how us need to understand that?
  If please be so kind and explain exactly what you do and what kind of sounds you can hear.

• Cooler on Satellite L505 making strange noise

  I have a Satellite 505 for about 6 months, and a few days ago the cooler started making strange buzzing when he works on the high rpm. He fell, got shaked, nothing.
  Is it possible to fix it (maybe clean?) without taking it to the laboratory of support?

  You have enough new notebook with valid warranty, and don t waste your time with temporary solutions and communicate with the service of Toshiba. They should solve the problem.

  Fan may be defective and must be replaced.

• Satellite A500-13F - strange noise when the context changes

  I hear "zzzzzzzzz" when the substantive change and when I go to open the page to another;

  I tried to change the realtek audio driver, but it does not work and when I played, it be very strong and get high...

  Please help me!

  Hello

  Whence the noise?
  It comes from speakers or HARD drive maybe?

  > I hear "zzzzzzzzz" when the substantive change and when I go to open the page to another;
  Have you noticed that noise only with internet explore?
  It is not using batteries or adapter only?

  Please check this and please provide more information and details.

• Satellite L505-13Z - BOOT error

  Hi all, I have a Satellite L505-13Z. After the hard drive recovery, something went wrong and I had only the F12 page.
  I used the recovery DVDs. It worked for an hour to install win7, then he did a reboot and I saw the windows screen, so that it starts again and stopped working: whenever I turn it on, I have the F12 screen, choose a place to start. Hard drive is detected, but if I choose what it I got the "Boot error" and back to the same page.

  I would try Hiren boot to check if the hard disk is OK or not. How will I know if it's only the hard drive or something else?

  Thank you

  UPDATE.
  I used a bootable cd with Hiren and each test on hard disk and RAM are OK, no errors.
  I inserted the DVD to see if he had the option to repair an installation, but do not, so I installed again. In the end, we asked me to remove the DVD and restart; I did and I went to loop: win 7 was updating registry, reboot, win 7 has been updated to register...

  I wondered if the DVD has been damaged, but is no way to download from microsoft, a Windows 7 copy, because when I insert my response series is to ask the supplier...

  What can I do?

  Posted by jazzrock71
  

  Hi all, I have a Satellite L505-13Z. After the hard drive recovery, something went wrong and I had only the F12 page.
  I used the recovery DVDs. It worked for an hour to install win7, then he did a reboot and I saw the windows screen, so that it starts again and stopped working: whenever I turn it on, I have the F12 screen, choose a place to start. Hard drive is detected, but if I choose what it I got the "Boot error" and back to the same page.

  I would try Hiren boot to check if the hard disk is OK or not. How will I know if it's only the hard drive or something else?

  Thank you

• Satellite X 200 - strange sounds, close the cooler

  I have this x 200 for over a year now and for the last 10 days, I hear strange noises near the cooler which is located on the lower side right (the cooler in the cooler of the DVD).

  I don't know how to open this workbook for maybe clean the fan or Exchange it. It looks like a guide to disassemble for this machine.

  Thank you

  Sounds like the fan needs to be replaced.

  Is the system under warranty? I would send it to an ASP for repair. The X 200 is a complicated design and can be difficult/risky to pull out by the owners.

• L50-A-11 t satellite - cannot set up the audio output

  Hello

  I have a Satellite L50-A-11 t with Win8.1, and I can't set it up to get the sound out of the speakears computer and the speakers connected to the audio output.

  The realteck controller does not show me almost any configuration option, is this normal?

  Mate sorry but the message isn't clear enough.
  What do you exactly do with Notepad and the speakers?
  You speak of internal or external stakeholders?

  The sound of s notebook (record and playback) can be configured in the control panel? sound. There, you will find the Read tab (lists all the devices as speakers, headphones) and tab (internal microphone, external microphone) record.

  You must mark the device as default device, if you want to use.

• Change the audio output default usb headset speaker 3000 Microsoft livecaht

  Yesterday, when I ran my Rosetta Stone language software that I heard noise coming from my newly installed Microsoft Live Chat 3000 USB headset, today, when I run the software, the microphone still works. But the sound comes through the speakers of the laptop. I looked through Windows and cannot find a place to tell windows to use the headphones to the audio output.

  I saw a similar problem on this site and followed the recommendation to remove the Chuck and download the latest driver on your part and re - install but still the sound comes through the computer speakers.

  Can my children re-configured something but he does not confess to it. But I do not understand why remove then re-loading the drivers does not work. I use Windows XP SP3 entirely under license and updates.

  I have them just a couple of days ago take their back and try something else?

  Thank you

  Try Control Panel, sound, properties, change the headset speakers, also, R.click

  the President of the clock opens, properties, adjust.

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• Can I control where is the audio output?

  I built in sound on my motherboard (Asus Socket 775 using Realtek Audio).  So many times I need to switch between the different audio outputs.  Surprisingly its very difficult to find an external box which accepts audio and can spend 2 or more outputs. Most of us use a helmet, then quality maybe, headphones and speakers a speaker, etc.  Most of us need at least 2 output audio.  In any case, I tried to connect my headset to the rear and side outputs and it sounded identical to the front channel output of channel 2, 4, 6 or 8 in the Realtek audio program.  Really identical.  I went repeatedly back and forth to make sure.  There was a small delay in the sound that passes through when I plugged in the rear (in mode 4 channels) and side (in mode channel 6 or 8).  But the sound itself was the same in all directions.

  Does anyone know why it would be the same?  Was it because it was coded in stereo?  Wouldn't the audio program Realtek tries to synthesize multichannel for the side and the rear channels?  Central/subwoofer channel was mono so that makes sense.  And the mic input works fine.

  If I could control what output I wanted to use I have a selection of 3 outputs (front, side and rear) to choose from.  Helmet quality, headset for chatting, and speakers.

  I realize many computers have outputs audio to the front and back but I don't use that nor do I have the header for this Panel.  I don't know if there is a provision to switch between front and rear exits.  If there was it would be a great addition.

  But as everyone knows, it's a pain to switch the outputs in Windows.  You must start sound in the Control Panel, go to Audio off the 5 tabs, choose which output desired, apply, OK.  I put the sound on a shortcut but its still a pain.  And there are often close the application using the audio output as well.  A mechanical switch could be fleeting and the right side of your keyboard or your mouse.  A volume on the same box control would be smarter.  There is always a delay when you adjust the sound in Windows that would be better avoided.  You could do the same for the microphone so he could be muted most of the time, then passed to the headset or a speaker application where you are a little ways away from your desk.  Software switching does just fine.

  Hello

  I suggest to browse the Internet using your favorite search engine and look for applications that perform the tasks you need.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• T400 2765 T6u, vista 32 b which distorts the audio output on my videos

  My T400 has poor visual quality in images and videos a week ago.  After that I updated the graphics driver, images, photos and videos are ok now, but the laptop is to distort the audio output on my videos. Can someone help me with this problem?

  Thank you

  guoclu

  I updated my audio driver and bought another helmet and solved the problem.  I don't don't know why my previous headphones does not work for t400-, it works perfectly for my office.

• How do we install the audio output device?

  How do we install the audio output device?

  Usually, plug you speakers or a connector into the line-out or speaker of your sound card. You may need to update your audio drivers to get all the features of the software. What sound card do you use? Built in or add on the map?

• Make crashes if the audio output selected

  Hello

  I'm having a problem with AE CS5. Whenever I try to make a video, it hangs on the first image and does not provide for as long as I selected audio. If I deselect the audio option in the output settings, then the video without hesitation. Audio works in the RAM Preview, however. I tried to export to AVI, WMV... no luck. Finally the error 'an output module no longer"appears.

  I am running Win 7, i7-820QM, 8 GB memory DDR3. I don't think that it is a hardware problem, but I don't really know the source of this problem either.

  If all goes well, there is an easy solution for this.

  Thank you

  Andrew

  Hey guys,.

  I was able to solve this problem. I'm not sure where the conflict is / was, somewhere, but here's what worked: I have created a different user account and shot to the top of AE. For some reason, the audio output module works perfectly on this account, and the audio preview RAM working more regularly on this account also. I do not uninstall any software or codecs suspicious right there. I'm not running that much more on my main account in relation to the other - can - be an antivirus or something similar - buy Hey, I'll take the same unexpected happy result. Thanks again.

  Andrew

• Satellite C855-12Z - strange noise, even if the cooler is off

  Hello again,

  I have a toshiba satellite c855 12z and I heard a strange noise even if toshiba pc health monitor shows that the heater is off, it's like an air blowing inside the laptop, you need 2 coolers? or can it be the hard drive? When I bought the laptop was very quiet, now I always hear this noise...

  Help please

  It's always hard to talk about things that are not verified...
  There are two things that could create a noise: cooling fans or HARD drive.
  Cooling fans are not DISABLED the cooling module can run at a lower speed, but it is not completely off.

  HARD drive runs too, but it should not create noise if the HARD drive is OK

• Re: Satellite L505-13Z - nothing else happens after the BIOS update

  Has anyone ever imagined a (free or inexpensive) solution to this? It happened to my L505-13Z a few days ago.

  He sent for the service, but I'm afraid it's going to cost me: S

  Hi Cvalda,

  If something went wrong during the update of the BIOS you can do anything to reflash the ROM module because special tools are needed. This is possible only from an authorized service provider.

  So it was good has sent for service but let's wait to what say guys. ;)