Could not detect USB RIO 7856R in labview 2012 SP1

Similar Questions

• Boot failure: REM could not detect 2 hard drives

  Hello. I bought a HP Pavilion G6 series laptop (LX273EA #ABU) last year and he stopped to load correctly. When I click on "Repair (recommended)" I get an error messaqe saying "REM could not detect 2 hard drives. I tried to start in safe mode and it will not work.

  The laptop is two months out of warranty, and the only support option I found is a phone call from £30 with no guarantee of assistance. Any input would be appreciated.

  Thank you

  Michael McDonald

  You are welcome Michaelmcd85.

  The 305 error indicates that the hard drive has failed. You will need to replace the hard drive.

  This is an easy repair so I'll give you the information you need to fix yourself. It's your interview Guide &. It contains information on how to disassemble the laptop. The guide also contains information that will allow you to choose a replacement hard drive.

  If you do not want to repair the laptop you can contact HP Support directly to the 1-800-4474-6836 if you are in the USA / Canada. If you are in another country, you must first visit HP's Support around the world to find the coordinates for your region.

  I hope this information is useful.

• Bluetooth could not detect any device

  My Device Manager could not detect the bluetooth device. and if I search my bluetooth icon bluetooth device, it pairs with my device bluetooth and shows connected but after awhile, it shows not connected.

  HP model p027tx, windows 8.1

  Please help me.

  Hey Afonso-abs,.

  Thanks for the update.

  Try this:

  1. Go to devices and printers.
  2. Right click on the device icon and select control.
  3. Click on sign out and then sign in.

  Also, make sure that both your phone and Bluetooth hardware is on detectable.

  Your computer may be defined as detectable by right-clicking on the Bluetooth icon in the system tray, click on show settings and check the Allow Bluetooth devices to find this PC box.

  Let me know if it helps.

• Windows could not detect a dial-up modem

  Win 7 trying to get the dial modem to work.  When you try to set up a connection from the network and sharing Center numbering, I have 'Windows could not detect a dial-up modem.

  Modem is properly installed in the Device Manager and power light is on.  I know that the modem works because I tested it on a backup system.

  My research of troubleshooting led me to check Remote Access Connection Manager, which does not start and causes error 1068.

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Disable the security/firewall software and check if it helps.

  Disable security software: http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable the Windows Firewall:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Method 2:

  Try to activate the Remote Access Connection Manager dependency services and check if it helps.

  Follow the steps to enable the Remote Access Connection Manager dependency services:

  a. Click Start, type services.msc in the search box and press ENTER.

  (b) in the services window search for addiction services:

  Secure Socket Tunneling Protocol Services

  Telephony

  Internet connection sharing

  Remote Access Auto Connection Manager

  Routing and remote access

  c. right click each service one by one and start the services.

  d. make sure that the problem is solved.

  Also read the following article from Microsoft and check if it helps.

  http://support.Microsoft.com/kb/827328

  Note: it also applies to Windows 7.

  For more information, see the following Microsoft articles and check if that helps.

  Install or remove a modem:

  http://Windows.Microsoft.com/en-us/Windows7/install-or-remove-a-modem

  Advanced dial-up settings:

  http://Windows.Microsoft.com/en-us/Windows7/advanced-dial-up-settings

  Should which modem I use to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/which-modem-should-I-use-to-connect-to-the-Internet

  Modems: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/modems-frequently-asked-questions

  Hope the information is useful.

• "Setup could not detect all the printers.

  I've recently set up a new computer and the network.  The host computer is running Vista.  I have connected a Deskjet 6940 via an ethernet cable into the Linksys router and can print from the host computer.

  I have a laptop which is under XP Pro, and who has a connection with the network.  I downloaded the driver from HP on the laptop to try to connect with the 6940, but during the install process, I get the message "Printer not found - Setup could not detect all the printers on the network."

  Firewalls on both computers is disabled.

  When I type the IP address in the address of the host computer or on the portable bar, I page of the printer, including its SSID.

  I tried to type the IP address in the field suitable for the installation of HP on the portable routine, however and always got the "printer not found."

  Ideas?  TIA

  The Deskjet 6940 being on the network, we will try to add the printer manually. Here is the sequence to XP:

  1. Click on the button 'Start'--> Printers and fax machines.
  2. Under print jobs, click on "Add Printer".
  3. Click 'Next' in the Add Printer Wizard window.
  4. Select " printer local to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. Under "Add Standard TCP/IP printer Port", enter the host name of the printer . You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler and click on "next".
  11. Click "next".
  12. Click "Next" and "Finish."

• I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  Hi soewandichan,

  Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

  Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

  Kind regards

  Tanuj

• Installation of the Module LabVIEW 2012 SP1 FPGA with LabVIEW 2012 SP1 64 bit on Windows 7 X 64 machine.

  I installed 32-bit and 64-bit LabVIEW 2012 SP1 on Windows 7 X 64 computer. After that, I installed SP1 FPGA Module. While module FPGA completely installed in the 32-bit version and could develop projects fpga, FPGA interface has not installed the 64-bit version. Anyone had this before question?

  The document 5WMF8NQ2 knowledge base says it's doable.

  I have tried to repair the installed module, remove and then reinstall the module. Nothing helped me to get the FPGA interface on a 64-bit host VI. Any suggestions? Addition of the individual screws through the range of editing functions like a tedious process and the palette is not completely functional.

  I solved the problem. Had to repair each driver separately for LabVIEW 2012 SP1 64 bit installed on the default drive. You may need to copy paste files to the folder that it installed in function.

• How do we install support for labview 2012 sp1 64-bit

  Hello

  I downloaded and installed Labview 2012 sp1 64-bit and

  the installation requires a drive support.

  Where can I download a dvd for 64-bit Labview support?

  Thank you

  desiko

  You must install the drivers again so that it will install support for the 64-bit version of LabVIEW.

• I can't MJD (date and time) in LabVIEW 2012 SP1?

  I need some time my data of stamps before sending it to the file.  I did this with the standard calendar date and time but MJD is that we prefer to use.  How can I get a timestamp MJD in LabVIEW 2012 SP1?

  Check the JD MJD conversion formula
  http://www.IERS.org/nn_10828/IERS/en/service/glossary/MJD.html

  The modified Julian day (MJD) is defined as MJD = JD - 2400000.5, where JD is the Julian Day

• Could not find the FPGA devices in Labview 20104 32bits

  Hi, I just installed Labview 2014 32 bit on my computer which also has 32-bit Labview 2012.

  The FPGA card is PCIe-7842R and the operating system is Windows 7 64 bit.

  The FPGA card works well on the 2012 LabVIEW. But in 2014, there not the target element and the device that is used to add the FPGA hardware.

  Need to install something else?

  Thank you

  

  You have the LabVIEW FPGA for LV2014 and installed the drivers OR-RIO (supported by LabVIEW 2014 development)? (Look in MAX under software)

• You try to run startup repair but get the message that it could not detect a problem.

  Original title: start repair.

  I tried to use my installation cd to repair the startup.  Then, I get the message "could not Startup Repair detect a problem.  If you have recently established a legacy to this computer, such as a camera or portable music player, remove it and restart your computer. "But nothing is fixed.
  I use a Toshiba laptop with Vista.

  Hello cats0527,

  From what I could gather, it is not a specific forum for Microsoft Office Accounting 2008.  That being said, you try to open a new thread in the following forum:

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_other?tab=all

  At the very least, they should be able to point you in the right direction.

  Best regards

  Matthew_Ha

• Could not detect my iphone 5 s after the updates of iTunes

  I just updated my 5s 10 IOS and updated itunes to the latest version. When I connect my phone to the computer, itunes does not detect the phone. The phone icon does not appear...

  I tried the things:

  1. reboot the computer

  2 restart my phone

  3. connect the phone to three different cables

  Hello

  Follow the steps here:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• Envy 14 sleekbook 14-k074ca: my computer laptop hp envy 14 sleekbook 14-k074ca could not detect my wifi g 5

  my laptop does not detect my wifi of 5 g at home, but my phone can see. I updated the driver but I still don't see it.

  Hello:

  According to the list of parts for your laptop, it comes with an Intel Centrino Wireless-N 2230 wireless network adapter.

  http://PartSurfer.HP.com/search.aspx?SearchText=E0M45UA

  This wireless card is a single band card that only works on the band of 2.4 GHz Wireless.

  Plug on the Intel card...

  http://www.Intel.com/content/dam/www/public/us/en/documents/product-briefs/Centrino-wireless-n-2230-brief.PDF

• MMC could not create the snap-in-windows server 2012 R2

  My problem:

  MMC could not create the snap. The snap-in may not be installed properly

  Name: Windows Deployment Services

  CLSID: {8D92C23E-7E5F-42BB-810F-0211F8A453C4}

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Could not detect my IX2 of PC

  My IX2 is connected to my router.

  I can detect and connect to all computers, laptops and mobile devices on the network accept to a certain PC.

  The problematic PC is the only one connected directly (by cable) to the router, all the rest are via Wi - Fi.

  It is a machine, Win7 Pro.

  It does not recognize the SIN at all, and it fails to connect also from the browser (when I type the IP address).

  It connects to other computers on the network (I can open the files in the shared or public folders)

  To make it even more strange - several weeks ago - no reason I can think of - the PC connect to the NAS.

  It worked fine for a few weeks until I've had a power failure which caused all the machines to restart (including the IX2)...

  So now again - all devices are connected to the NAS - no problem

  Just this specific PC does not!

  Any idea?

  Thank you!