Could not detect my IX2 of PC

Similar Questions

• Boot failure: REM could not detect 2 hard drives

  Hello. I bought a HP Pavilion G6 series laptop (LX273EA #ABU) last year and he stopped to load correctly. When I click on "Repair (recommended)" I get an error messaqe saying "REM could not detect 2 hard drives. I tried to start in safe mode and it will not work.

  The laptop is two months out of warranty, and the only support option I found is a phone call from £30 with no guarantee of assistance. Any input would be appreciated.

  Thank you

  Michael McDonald

  You are welcome Michaelmcd85.

  The 305 error indicates that the hard drive has failed. You will need to replace the hard drive.

  This is an easy repair so I'll give you the information you need to fix yourself. It's your interview Guide &. It contains information on how to disassemble the laptop. The guide also contains information that will allow you to choose a replacement hard drive.

  If you do not want to repair the laptop you can contact HP Support directly to the 1-800-4474-6836 if you are in the USA / Canada. If you are in another country, you must first visit HP's Support around the world to find the coordinates for your region.

  I hope this information is useful.

• Bluetooth could not detect any device

  My Device Manager could not detect the bluetooth device. and if I search my bluetooth icon bluetooth device, it pairs with my device bluetooth and shows connected but after awhile, it shows not connected.

  HP model p027tx, windows 8.1

  Please help me.

  Hey Afonso-abs,.

  Thanks for the update.

  Try this:

  1. Go to devices and printers.
  2. Right click on the device icon and select control.
  3. Click on sign out and then sign in.

  Also, make sure that both your phone and Bluetooth hardware is on detectable.

  Your computer may be defined as detectable by right-clicking on the Bluetooth icon in the system tray, click on show settings and check the Allow Bluetooth devices to find this PC box.

  Let me know if it helps.

• Windows could not detect a dial-up modem

  Win 7 trying to get the dial modem to work.  When you try to set up a connection from the network and sharing Center numbering, I have 'Windows could not detect a dial-up modem.

  Modem is properly installed in the Device Manager and power light is on.  I know that the modem works because I tested it on a backup system.

  My research of troubleshooting led me to check Remote Access Connection Manager, which does not start and causes error 1068.

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Disable the security/firewall software and check if it helps.

  Disable security software: http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable the Windows Firewall:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Method 2:

  Try to activate the Remote Access Connection Manager dependency services and check if it helps.

  Follow the steps to enable the Remote Access Connection Manager dependency services:

  a. Click Start, type services.msc in the search box and press ENTER.

  (b) in the services window search for addiction services:

  Secure Socket Tunneling Protocol Services

  Telephony

  Internet connection sharing

  Remote Access Auto Connection Manager

  Routing and remote access

  c. right click each service one by one and start the services.

  d. make sure that the problem is solved.

  Also read the following article from Microsoft and check if it helps.

  http://support.Microsoft.com/kb/827328

  Note: it also applies to Windows 7.

  For more information, see the following Microsoft articles and check if that helps.

  Install or remove a modem:

  http://Windows.Microsoft.com/en-us/Windows7/install-or-remove-a-modem

  Advanced dial-up settings:

  http://Windows.Microsoft.com/en-us/Windows7/advanced-dial-up-settings

  Should which modem I use to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/which-modem-should-I-use-to-connect-to-the-Internet

  Modems: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/modems-frequently-asked-questions

  Hope the information is useful.

• "Setup could not detect all the printers.

  I've recently set up a new computer and the network.  The host computer is running Vista.  I have connected a Deskjet 6940 via an ethernet cable into the Linksys router and can print from the host computer.

  I have a laptop which is under XP Pro, and who has a connection with the network.  I downloaded the driver from HP on the laptop to try to connect with the 6940, but during the install process, I get the message "Printer not found - Setup could not detect all the printers on the network."

  Firewalls on both computers is disabled.

  When I type the IP address in the address of the host computer or on the portable bar, I page of the printer, including its SSID.

  I tried to type the IP address in the field suitable for the installation of HP on the portable routine, however and always got the "printer not found."

  Ideas?  TIA

  The Deskjet 6940 being on the network, we will try to add the printer manually. Here is the sequence to XP:

  1. Click on the button 'Start'--> Printers and fax machines.
  2. Under print jobs, click on "Add Printer".
  3. Click 'Next' in the Add Printer Wizard window.
  4. Select " printer local to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. Under "Add Standard TCP/IP printer Port", enter the host name of the printer . You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler and click on "next".
  11. Click "next".
  12. Click "Next" and "Finish."

• I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  Hi soewandichan,

  Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

  Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

  Kind regards

  Tanuj

• You try to run startup repair but get the message that it could not detect a problem.

  Original title: start repair.

  I tried to use my installation cd to repair the startup.  Then, I get the message "could not Startup Repair detect a problem.  If you have recently established a legacy to this computer, such as a camera or portable music player, remove it and restart your computer. "But nothing is fixed.
  I use a Toshiba laptop with Vista.

  Hello cats0527,

  From what I could gather, it is not a specific forum for Microsoft Office Accounting 2008.  That being said, you try to open a new thread in the following forum:

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_other?tab=all

  At the very least, they should be able to point you in the right direction.

  Best regards

  Matthew_Ha

• Could not detect my iphone 5 s after the updates of iTunes

  I just updated my 5s 10 IOS and updated itunes to the latest version. When I connect my phone to the computer, itunes does not detect the phone. The phone icon does not appear...

  I tried the things:

  1. reboot the computer

  2 restart my phone

  3. connect the phone to three different cables

  Hello

  Follow the steps here:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• Envy 14 sleekbook 14-k074ca: my computer laptop hp envy 14 sleekbook 14-k074ca could not detect my wifi g 5

  my laptop does not detect my wifi of 5 g at home, but my phone can see. I updated the driver but I still don't see it.

  Hello:

  According to the list of parts for your laptop, it comes with an Intel Centrino Wireless-N 2230 wireless network adapter.

  http://PartSurfer.HP.com/search.aspx?SearchText=E0M45UA

  This wireless card is a single band card that only works on the band of 2.4 GHz Wireless.

  Plug on the Intel card...

  http://www.Intel.com/content/dam/www/public/us/en/documents/product-briefs/Centrino-wireless-n-2230-brief.PDF

• Could not detect USB RIO 7856R in labview 2012 SP1

  Hi @all,

  Why I couldn't detect 7856R USB RIO in labview 2012 SP1? I already install drivers include DVD, see (USB-7856R) in max or, but can not add it to the project manager.

  Data sheet says its compatible (between LV2012 and 7856R)!

  Hey damienski86,

  According to the product page (tab "Panorama"):

  Required software 
  This product requires the LabVIEW FPGA Module 2013 or later Version and NEITHER-RIO Version 13.0 or later driver software.

  I think that you will have to go up to the latest software (2013 SP1 came out today) in order to be able to use your new hardware. Where do you see that the device is compatible with 12.0 specifications?

• PowerEdge R720 - could not detect hard drive

  I have 2 servers PowerEdge R720, and I try to install windows server 2008.

  I used the windows drivers, and when I got diving hard screen I did not

  Please I need help

  Abu-Said,

  It seems that the issue may be that the raid driver is not loaded. How you try to load the operating system, starting at the press of 2008?

  According to the controller, you'll have different driver files. If you have the H310, H710 or H710p then this is the driver you'll need - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r720?driverId=M20VR&osCode=WS8R2&fileId=3160710291&languageCode=en&categoryId=SF

  If you try to load the operating system via the regulator of the lifecycle of F10, then this is the file you will need - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r720?driverId=FF29M&osCode=WS8R2&fileId=3325054588&languageCode=EN&categoryId=DD

  Let me know if it helps.

• Setup could not detect all the printers on the network

  Hello

  I use a CP1025nw for a while now on Windows 8 Pro use Windows 7 drivers.  Today, I found that Windows 8 drivers out there so I uninstalled the version of Windows 7 and I try to install the new however have great difficulties.

  The printer is connected by ethernet to the router, I can connect via the web browser without problems, printing HP Scan doctor finds the printer intermittently and the installation software can't find any.  The firewall is disabled, and of course the printer is offline, as evidenced by the web connection.

  Can someone help with this frustrating problem?

  Thank you

  I have the printer works now by installing the base driver and a manual installation, even Windows can not find the printer on the network despite the browser it's fine.

  The procedure was to install the base driver downloaded from the HP website, add a printer, choose "my printer is not listed", select HP JetDirect port, specify the IP address of the printer and manually select the driver in the list.

  I also have an ongoing case with the help of HP so no need to reply to this topic, but I will update if I hear anything that might be useful to others.

• Could not detect my DPS and hdd with Esxi 6.0

  Hello forum,.

  I bought a relatively new desktop for my studies of cisco computer. I am completely new to exsi and took notes on the net to install esxi.

  In "Select a disk to install or upgrade", I am unable to see the two hard drives.

  I have,

  CPU Intel I7 - 4790K, motherboard Asus Z97 - has

  240GB Kingston SSD

  Toshiba 1 TB HARD drive

  I tried to format the two hard drive using windows 7 and tried to install Esxi 6, but the two remains undetected.

  I tried 5.5 as well but the result is the same.

  Help, please.

  Thank you.

  ESXi is built for server hardware, he may simply not support your disk controller. Since it is a lab environment, you can check if VMware experience before: how to make your unsupported work SATA AHCI Controller with ESXi 5.5 and 6.0 helps build a custom installation image that runs on your hardware.

  André

• HP 15-F039WM: could NOT DETECT MY DRIVE SINCE the REFORMAT HP 15-f039wm Windows 7 PRO

  I just recently installed a windows 7 64 bit on my hp 15-F039WM, but I'm having a problem with the driver installation for my laptop can't read my Flash DRIVE, no usb driver is installed. Need your help on how to install the drivers for your laptop.

  Thanks in advance guys

  Have you tried the flash drive in another port? You should have 2 USB 3.0 ports, on one side and a USB 2.0 on the other. The USB 2.0 should work.

• Windows could not detect all the wired or wireless [XP] network cards

  Hello
  Recently, I put in a new HARD drive but can't get online at all. Make a diagnosis of the State in Internet Explorer Tools, I got this:

  http://Tinypic.com/r/2qi4sae/5

  and

  http://Tinypic.com/r/11vthma/5

  I am at a loss here, any help much appreciated. Thanks for your time.

  Concerning

  Hello

  I suggest you to return these KB articles and check if it helps:

  http://support.Microsoft.com/kb/315275

  http://support.Microsoft.com/kb/325487

  It will be useful.